Backups Failed - .BAK Incorrectly Formatted ?
Aug 3, 2002
What does this error message mean ? We have SQL2000, with database FULL RECOVERY. Other databases on the server are fine. Backups stopped working a week ago. Can't remeber anything changing
+++++++++++++++++++++++++++
The backup data in 'D:BackupTI backup.BAK' is incorrectly formatted. Backups cannot be appended, but existing backup sets may still be usable. [SQLSTATE 42000] (Error 3266) BACKUP DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
View 1 Replies
ADVERTISEMENT
Feb 25, 2005
I get this message in the SQL Server logs after I restore a db. I copied this backup from another server is that why it's telling me it formatted incorrectly? The strange thing is in QA it restores successfully but when I look @ EM it's remains in Loading mode and never completes
The backup data in 'D:SQLServerMSSQLackupjan_prod_db_20050214173 0.BAK' is incorrectly formatted. Backups cannot be appended, but existing backup sets may still be usable.
View 3 Replies
View Related
Jul 23, 2005
For some reason a stored procedure which I have created is incorrectlysaving the date to the table. It seems the day and month are beingswapped around e.g. a date which should be the 12th April (12/04/2005)is saving as the 4th December (04/12/2005).The parameter used in the stored procedure comes from a VB6 app, Iamended this so the format was "yyyymmdd hh:mm:ss". The full line in VBbeing,Parameters.Append .CreateParameter("date_of_call", adChar, , 17,Format(firstCallDateTime, "yyyymmdd hh:mm:ss"))When I run my VB app it works fine, the syntax in the stored procedureis,CREATE PROCEDURE dbo.spUpdValues@data_id int,@date_of_call datetimeasupdate dataSET date_of_call = CONVERT(char, @date_of_call, 101)where data_id=@data_idIs it because the convert format is using an american date format ? Ican't see why as I can't reproduce this error using my own PC as thedate saves correctly, I can also confirm it's not happening to everybodywho uses the app. If it is happening for specifc users then what couldbe the cause. I've checked Regional Settings and all seems fine there.Any ideas on what could be doing this as I'm struggling to investigateany further.To debug I ran the stored procedure direct, manually inputting thevariable - again no problem. Also, the following SQL statment shows noproblem...declare @date_of_call datetimeset @date_of_call = '20041101 08:30:00'select CONVERT(char, @date_of_call, 101)select CONVERT(char, @date_of_call, 106)------------------------------11/01/2004(1 row(s) affected)------------------------------01 Nov 2004(1 row(s) affected)Any help would be much appreciated.*** Sent via Developersdex http://www.developersdex.com ***
View 10 Replies
View Related
Sep 13, 2007
Hello,
I am unable to send a message to a target service on a different SQL Server instance. Using the SQL Profiler, I get the following error from the target machine:
Broker::Connection: Connection handshake failed: An OS call failed: (80090326) 0x80090326(The message received was unexpected or badly formatted.). State 106.
On the initiator side, the transmission_status shows the following error:
An error occurred while receiving data: '64(The specified network name is no longer available.)'.
Any ideas on why the target thinks the message is "unexpected or badly formatted"? Btw, I am specifying the default message type and contract for the services.
Thanks.
View 1 Replies
View Related
Oct 11, 2000
Hello All,
We are experiencing a backup problem on many of our database servers. We use one common server to store our backups. The backup of our databases is failing intermitantly. The strange thing is the backup file are partialy created, then we receive the following errors:
Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 3201: [Microsoft][ODBC SQL Server Driver][SQL Server]Cannot open backup device ' olfesdbbackupoldrmsdbmsdb_db_200010101918.BAK'. Device error or device off-line. See the SQL Server error log for more details.
[Microsoft][ODBC SQL Server Driver][SQL Server]Backup or restore operation terminating abnormally.
SQL Server error log shows:
BackupDiskFile::CreateMedia: Backup device ' olfesdbbackupoldrmsdbmsdb_db_200010101918.BAK' failed to create. Operating system error = 32(The process cannot access the file because it is being used by another process.).
The file was created with 0 KB prior to coming up with these messages.
TOLDR - 10/10/00 7:55:15 PM
[Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 3202: [Microsoft][ODBC SQL Server Driver][SQL Server]Write on ' olfesdbbackupoldrdrvlocal1drvlocal1_db_200010101951.BAK' failed, status = 5. See the SQL Server error log for more details.
[Microsoft][ODBC SQL Server Driver][SQL Server]Backup or restore operation terminating abnormally.
SQL Server error log shows:
BackupMedium::ReportIoError: write failure on backup device ' olfesdbbackupoldrdrvlocal1drvlocal1_db_200010101951.BAK'. Operating system error 5(Access is denied.).
Error 5 is 'Access Denied". It had written 24,902 KB to the file prior to coming up with this message. It was almost finished, as the normal size for this backup is in the 28,700KB range.
Any suggestions?
-Matt
View 2 Replies
View Related
Feb 6, 2000
SQL 7 SP1 NT 4.0 SP5
I created a backup plan for transaction logs only to run every 30 minutes. It works great for all databases except the Master and my main database scdb_v2.
The routine backups up the other 3 databases with no issue.
Why is this happening ?
Thanks,
Craig Somberg
mailto:csomberg@stageone.com
View 3 Replies
View Related
May 8, 2007
Hello everyone! Looking for some insight here on database backups that fail.
We have many SQL servers that we maintain by storing Job/Maintenence Plan history on a central server, which then emails out daily reports to let us know what backed up last night and what didn't
This was easy to do in SQL 2000, not so much in SQL 2005. I have put together a query that gathers the info I need for the successes:
SELECT DISTINCT '00000000-0000-0000-0000-000000000001' AS Plan_ID, mpld.line1 as "Plan Name", bud.database_name as "Database", mpld.server_name, 'Backup Database' as Activity, mpld.succeeded, bs.backup_finish_date, DATEDIFF (MS,bs.backup_start_date,bs.backup_finish_date) as Duration, bs.backup_start_date, mpld.error_number, mpld.error_messageFROM msdb.dbo.sysmaintplan_logdetail mpld
INNER JOIN msdb.dbo.backupset bs
on (select convert(char(12),mpld.start_time,109))=(select convert(char(12),bs.backup_start_date,109))-- on bs.database_name=bud.database_name
inner join
msdb.dbo.bu_dbs bud
on bs.database_name = bud.database_name
WHERE mpld.succeeded = 1 and mpld.line2 like 'Backup%' and bs.type='d'
and bs.backup_start_date > ( SELECT CONVERT(char(12), (GETDATE()-1), 109) )
ORDER BY bud.database_name DESC
But I am having trouble using a query to determine the databases the FAILED during backup. MSDB.BackupSet and MSDB.SYSMaintPlan_LogDetail really have nothing,because often times, even if a step in a Maint. Plan fails, the plan finishes reporting success.
Does anyone know of a good way to gather info about failed database backups?
Thank you!
Mario
View 6 Replies
View Related
Nov 15, 2015
The space allocated to the Log in question is 180 GB. During this time period I was running TLog backups every 5 minutes, yet the log continued to chew through to 80 GB used, even after the process was complete and a final TLog backup had been taken. It continued to stay very large until the Full backup was complete -- or something else that I'm unaware of completed. Like every other DBA I typically take a TLog backup to shrink the log, but what appeared to be the case here was the Full completed and it released the used log space. All said, will Transaction Log backups not free up the log during Full backups?
View 3 Replies
View Related
Jan 2, 2008
Hi all,
I have an odd issue. I have a query that returns one row from SQL Server. The value for one column (payment) in this row is 5.00. There are no other rows returned, only one row. However, when I do a sum on payment it returns 195! I dont know where its getting this from, especially since I can see all the rows by removing the SUM() and there only is one row. Here is the query:Select v_payments.tripid, Instransporttotal, lastName, firstName, tripDate, v_payments.payment,credit, translation, inscoid, v_payments.checkid
from v_billbuckets
left join v_patient on v_billbuckets.patientID = v_patient.ssnleft join v_payments on v_billbuckets.tripid = v_payments.tripid
left join v_InsCompany on v_billbuckets.inscompanyid= v_inscompany.inscoidleft join v_billRecItem on v_payments.tripid = v_billRecItem.tripid
WHERE v_payments.checkID = 315898GROUP BY v_payments.tripid, Instransporttotal, lastName, firstName, tripDate, v_payments.payment, v_payments.credit, translation, inscoid, v_payments.checkid
The above query returns one row. However, If I put SUM() around v_payments.payment in the SELECT line then it is 195. I dont know why it is doing this. Any ideas?
Thanks!
John
View 2 Replies
View Related
Apr 3, 2007
I have a report that is deployed at multiple sites without any problems, except one. At one site, when I render it to pdf, it doesn't look at all right, and the alignment on a table goes from center to right aligned for no obvious reason. It then stretches a textbox horizontally to force it onto another page. I've doublechecked and made sure that all the expand options on every single thing on the report is off, and I really don't understand why it would happen at only one site, even though the data is almost the exact same. Not only that, table cells don't stretch horizontally, they stretch vertically, so again, I'm stumped about why this one site would render incorrectly to a .pdf. Even in the report viewer, everything looks fine.
I am wondering if anyone has had a problem with rendering to pdf incorrectly when the rdl and data are correct, and what your solution was.
P.S. IT isn't a problem with margining, so please, don't give the generic "CHECK YOUR MARGINS" response.
View 3 Replies
View Related
Apr 10, 2006
Hi,I've got a question about saving into datetime fields in a SQL Server table. A form I have create has two fields both for dates as well as other form fields, but the user may or may not fill in all the form fields, so when they click the save link I have a query which saves all the form fields whether they are blank or not. Unfortunately this is causing the two date fields to be saved in the database as "01/01/1900" even thoough they are blank fields.What is a good way to not save blank date fields as "01/01/1900"?ThanksStephen
View 1 Replies
View Related
Aug 29, 2004
I have a customer who is running a script that generates a custom report. IT is not populating as it should and is returning zeros for everything.
I have tested the the script in the office and it is populating as intended. I have run a debug on the script and it is executing the correct SQL commands. The debug results for the customer and for the one tested in the office are identical. For some reason, the script is not writing to file but is looking at the correct data. I suspect that it is an environment issue most likely on the SQL level.
Could this be an issue with character set? How can I check their character set and language preferences? I understand they are set during installation.
They are using the same collation as us.
What else can I check as I am running low on ideas.
I advised the client to create a new DB and restore over the top. The script was then tested and it was found to be working fine. As it was given an inappropriate name (ie test), I advised to create a new DB with a production name and restore over the top again. We have since returned back to where we started as the report is generating only zeros.
H E L P !
View 1 Replies
View Related
Jul 23, 2005
I have a .NET application with a sql server database backend. Ourclient has been having problems lately with data being returned fromthe database with wrong data. We have error logging in our storedprocedures and even this is reporting wrong. In every stored procedurewe have the following:IF @@Error <> 0BEGINEXEC dbo.HandleError@ErrorNum = @@Error,@ProcID = @@PROCIDENDThen, HandleError looks like:CREATE PROCEDURE dbo.HandleError@ErrorNum int,@ProcID intAS/************************************************** ****************** PROCEDURE: HandleError* PURPOSE: Handles logging an error* CALLED FM: Other stored procedures************************************************** ******************/SET NOCOUNT ONDECLARE @UserID intDECLARE @Host varchar(50)DECLARE @Len intDECLARE @SPName VARCHAR(100)DECLARE @ErrorMsg varchar(500)DECLARE @ErrorTrace varchar(4000)-- Get our host nameSET @Host = HOST_NAME()SET @Len = LEN(@Host) - CHARINDEX(':', @Host)IF @Len > 0 AND CHARINDEX(':', @Host) > 0SET @UserID = RIGHT(@Host, LEN(@Host) - CHARINDEX(':', @Host))ELSESET @UserID = NULLSET @SPName = OBJECT_NAME(@ProcID)SET @ErrorMsg = 'SQL Error: ' + @SPNameSET @ErrorTrace = 'Error: '+ CAST(@ErrorNum AS VARCHAR(50))EXEC dbo.InsertApplicationErrors@ErrorMessage = @ErrorMsg,@ExceptionMessage = '',@ErrorStackTrace = @ErrorTrace,@UserID = @UserID,@HostID = @Host,@Logfile = '';SET NOCOUNT OFFGOInsertApplicationErrors inserts a log into a table we have that wemonitor. We got an error back in the ErrorStackTrace column with'Error: 0'. That shouldn't happen, as the only time we log error is ifit is not 0.Does anyone have any ideas on what might be wrong?Steve
View 7 Replies
View Related
Jul 10, 2007
I downloaded this 7/6/07 and am trying to debug. I have a field that is PICs9(5) and has 00 00 1D as its hex value. The component returns a dt_decimal field value of 20201-
I believe it thinks the 00 are spaces and converts them to ASCII 20. Any ideas on what is wrong here? Is there another step I am missing after the conversion? Any help would be appreciated.
View 1 Replies
View Related
Aug 3, 2007
I have run into a strange issue that I believe is a SQL Reporting Services issue.
I have a report laid out in landscape setting that has 4 columns of text. Two of the columns are sub-reports (due to the complexity and size, we did not flatten out the data in the stored procedure) and two of the columns are regular fields.
The 2 columns of regular fields are smaller, and normally only grow to about 1/2 the height of he page. One of the two sub-reports contains large amounts of text, and at time grows larger than the height of the page.
When the sub-report grows larger than the current page, it correctly starts up on the next page. But the 2 fields of data from the main dataset (not the sub-report columns) repeat themselves on the next page as well.
What is even more strange is the 2 fields of data from the main dataset only repeat data to grow vertically as far as the sub-report needs to grow. So if there is more data in either of these 2 fields than is needed for the sub-report to grow on the 2nd page, it will cut off the data in both of these fields.
I have tried placing the information in a group header. Turned the "Repeat on new page" both True and False, Took away the table header and footer, forced a page break after each group, tried using the "Hide Duplicates" property on the field within the details section, and nothing has seemed to fix the issue.
If anyone has run into this and found a work around, let me know.
Thank you,
T.J.
View 1 Replies
View Related
Mar 19, 2008
Hello All:I tried many times to install SQLserver 2005 on my My PC (VISTA Ultimate version). I always find configuration tools and working properly and can start any services and stop but I searched everywhereto find sql server management studio (SSMS) to connect but I don't find it ..... can someone help me because I've uninstalled and re-installed it many times but not found........
View 13 Replies
View Related
Jun 12, 2002
hi,
among our server-agent jobs is one for the log-reader-agent and its run status is displayed as error though the log-reader is working correctly, replication is working fine.
it had hit an error some days ago after an unexpected shutdown - but it has been auto-restarted correctly on restart of the sql-server agent.
now - what can i do to get back to a sensible run-status report?
i have already deleted the job-history with the hope that this might help - but it didn't. should i just stop and restart the job again?
can i somehow delete the status in the jobhistory?
i would gladly appreciate any ideas because it's making me just mad to have a 'failed' job status on the monitor *g*
thank you,
kerstin
View 1 Replies
View Related
Oct 26, 2007
All,
I have seen it happen frequently that I type in a perfectly valid SSIS expression (this is easy for me since I am an old hand at C++/C/C#) in a row in a Derived Column transformation, and it turns red. Or sometimes, I will have an invalid expression that I correct, but it stays red. Finally I have also seen it happen that I make some change in the data flow pipeline and suddenly a Derived Column transform develops an error. I then go into the Derived Column transform and find that the expression has turned red. So, I literally have to go into the expression in these cases, and make a trivial change to them to get the red error to go away. Alternatively, I can cut the derived column expression text, and then paste it back in and it works (this is most telling.)
So, it seems to me the Derived Column is somehow holding onto some meta data about the Derived Column that is getting out of date (rather than re-evaluating the correctness of the Expression.) One thing I usually can do to repro this at times is to remove a column (that the Derived Column depends upon) from the pipeline and then re-add it. When I go into the Derived Column it will be red, and then like I said I have to tweak the expression to force SSIS to re-evaluate the expression.
Anyway, I'm curious if anyone else has seen this?
Thanks.
View 10 Replies
View Related
Apr 9, 2008
I'm trying to import some data from an Excel 2007 file into a SQL table. I created the Source Connection Manager and an OLE DB Source Data Flow Component which uses it. (Correct me if I'm wrong, but I can't use the Excel Source because of the version of Excel the file is saved in.) The outgoing Data Flow Path thinks some of the fields being imported should be of type float, when in fact they have alpha characters in them.
The fields in the database are defined as varchars.
A Data Conversion Transform doesn't seem right because I need the data to come out of the source as string data (which it actually is in the Excel file). Even if I convert it to string on the way to the destination, I would still be missing the original alpha characters.
How/Where do I change it (Source Connect Manager, OLE DB Source Data Flow Component, something else) to correctly identify the field's type?
TIA,
Christy
View 1 Replies
View Related
Mar 29, 2001
Is there a way to store a formatted text (bold, italicized etc) in a text field on SQL Server 7.0 ?
View 2 Replies
View Related
Mar 3, 2004
Can somebody provide me an argument on how nicely formatted and indented procs perform better. I am currently formatting a 1000 line proc just to understand what it does ... Maybe your argument will help convince my development team to write neat procs :)
View 8 Replies
View Related
Jul 20, 2005
Hi,Is there a way to get stored procedure texts out in a formatted waylike defncopy in Sybase????? The way they print it out reallysucks............RegardsSubhas
View 1 Replies
View Related
Aug 27, 2004
Hi all,
With Windows regional options are set to Dutch/Netherlands (or any other country using comma as the decimal symbol), MS SQL Server BCP Delivers incorrect figures to the target table.
The source table is a text file containing commas as the decimal character (As an example, in the text file 100.000 is represented as 100,000).
The target table is a Sql Server database table, with the column in question defined as a FLOAT datatype.
When BCP is run to deliver the data from the text file to Sql Server,
all figures are multiplied by 1000 because the input file for BCP contains a comma as the decimal symbol.
Thus, instead of the data being delivered with a value of 100, it ends up having a value of 100000
Is there anyone out there who is aware of any command line parameters that can be added to the bcp command in order to avoid this ? Note, the field in question is defined as SQLCHAR in the BCP format file.
Thanks for any help anyone may be able to offer.
View 2 Replies
View Related
Apr 17, 2006
before anyone even says it, i checked the collation order on everything and it's the same. i get the error when the snapshot is trying to be bulk copied to the subscriber.
i'm on sql2k sp4, server and db collations are SQL_Latin1_General_SP1_CI_AS. here's a repro. 1st, run this in a blank db:
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[Event_Transactions]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [dbo].[Event_Transactions]
GO
CREATE TABLE [dbo].[Event_Transactions] (
[EventTransactionId] [int] IDENTITY (1, 1) NOT NULL ,
[OrphanedFlag] [bit] NOT NULL ,
[ProcessedFlag] [bit] NOT NULL ,
[ProcessedTimeStamp] [datetime] NULL ,
[EventTimeStamp] [datetime] NOT NULL
) ON [PRIMARY]
GO
CREATE CLUSTERED INDEX [EventTransactions_IDX_ProcessedOrphanedEventTimeSt amp] ON [Event_Transactions] (
[ProcessedFlag],
[OrphanedFlag],
[EventTimeStamp]
) ON [PRIMARY]
GO
ALTER TABLE [dbo].[Event_Transactions] ADD
CONSTRAINT [PK_Event_Transactions] PRIMARY KEY NONCLUSTERED
(
[EventTransactionId]
) ON [PRIMARY]
GO
insert into Event_Transactions (
OrphanedFlag
,ProcessedFlag
,ProcessedTimeStamp
,EventTimeStamp
)
values (
1
,0
,NULL
,'2004-05-07 15:15:24.000'
)
insert into Event_Transactions (
OrphanedFlag
,ProcessedFlag
,ProcessedTimeStamp
,EventTimeStamp
)
values (
0
,1
,'2004-07-08 13:04:01.513'
,'2004-07-07 16:52:08.000'
)
Now, use transactional replication to replicate it to another db taking all the defaults. when the distribution agent tries to apply the snapshot, it fails with the message mentioned in the title..
Has anyone ever seen this? It's keeping us from considering MS replication for one of our major products. Thanks.
View 1 Replies
View Related
Apr 8, 2011
We have this problem?
View 5 Replies
View Related
Jan 22, 2007
I have a table for articles that I want as
the basis for a blog. I have a field of description where the actual
article will go, I have only ever really
used tables to put in 'blocks' of text, how would I go about storing/displaying
data that is in my database table in a more formatted way, for example line
breaks, indents etc?
View 4 Replies
View Related
Mar 29, 2007
Hi,
I am trying to write the output of an sql query to a text file using bcp. Now the problem am facing is i have to format the text like i the following order...
<DATETIMESTAMP>08:39 Thursday, March 15, 2007</DATETIMESTAMP><CATEGORY>Quarterly Sales</CATEGORY><HEADLINE>Quarterly Corporate Earnings (03/15/07)</HEADLINE><BODY> Quarterly Corporate Profits (03/15/07) PER-SHARE ($) NET EARNINGS (mil$) REV. (mil$)COMPANY CURRENT YEAR-AGO CURRENT YEAR-AGO CURRENT YEAR-AGOabc 0.33 n/a 8.60 (13.30) 144.40 112.50 bcdf 0.16 (0.15) 7.80 (7.40) 101.90 81.20 gha n/a n/a (90.00) (80.00) 488.00 462.00 qwqw (0.10) (0.15) (3.30) (4.30) 2.90 2.20
Copyright(c) 2007 mycompany.com, Inc. All Rights Reserved</BODY>
Would somebody please advice whther this sort of formatting is possible with bcp..Please give some pointers am completely stuck....the company data is coming from a database table...am using sql 2005...
Thanks in advance
View 1 Replies
View Related
Feb 17, 2005
Hi All,
I am kindly seeking for help.
I have a table(MyTable) which is defined as (date datetime, ID char (10), and R, P,M,D&Y are all float) and the layout is as following:
Date ID R P M D... Y
1/1/90 A 1 2 3 4... 5
1/2/90 A 2 3 4 5... 1
...
2/11/05 A 3 4 5 6... 2
1/1/90 B 1 2 3 4... 5
1/2/90 B 2 3 4 5... 1
...
2/11/05 B 3 4 5 6... 2
...
The expected query results look like: ( this results from Date, ID and R fields)
Date A B
1/1/90 1 1
1/2/90 2 2
...
2/11/05 3 3
The SQL I wrote:
select date, ID,
A=sum(case when ID=A then R else 0 end),
B=sum(case when id=B then R else 0 end)
from MyTable
Group by date
I would also like to get another set of results with the same format but from date,ID and P fields:
Date A B
1/1/90 2 2
1/2/90 3 3
...
2/11/05 4 4
select date, ID,
A=sum(case when ID=A then P else 0 end),
B=sum(case when id=B then P else 0 end)
from MyTable
Group by date
The problem with that is if I have thousands of ID in MyTable I have to "hard code" thousands times and the same problem with the fields/columns. Is there any easier way to do this?
I also would like to insert the results into a table/view which will be refreshed whenever MyTable gets updated.
Any suggestion/comments are highly appreciated!
shiparsons
View 4 Replies
View Related
Jan 9, 2006
Hi All ,
Is it possible to insert the below text into a column and retrieve it in the same format ?
Thanks,
Hari Haran Arulmozhi
TEXT :
CLIENT NAME : ABC Corporation
CLIENT CITY : MUMBAI
================================================
INV_NO INV_DATE INV_AMT
================================================
I100 01-01-2006 Rs.600
I200 01-02-2006 Rs.800
I300 01-03-2006 Rs.1600
I400 01-04-2006 Rs.2600
I500 01-05-2006 Rs.9600
RECEIVED ADVANCE :Rs.10000
View 3 Replies
View Related
Dec 28, 2011
I have 265 word documents which I use with mail merge to create a master document.We are going to auto generate this master document going forward so I want to store these 265 word documents, these range in size from 10kb to 50kb. As I mentioned these are formatted and also contain a merge field/marker so what I will be doing is using a value in the database, my application will take the document which is stored as a string/blob and will replace the "merge field" with the value from the database.
I can write an application to import each of these documents but I am not sure whats the best way to store them in order to be able to find and replace the merge marker.Also I will be joining a number of these together to make the master document. So for example I take 10 of these and I replace the marker fields in these with the values from the database, I will then push that string out to a PDF/Word document for printing.
View 1 Replies
View Related
Nov 9, 2007
I need to export data to a worksheet and format the resultant sheet appropriately. I kow server side automation is a no-no. What would be the best alternative to accomplish this?
View 16 Replies
View Related
Apr 5, 2007
Could someone from the SQL Server Express team confirm that SQL Server Express SP2 w/Advanced Services shows up as "SQL Server 2005" in the installed programs list? The "Express" portion seems to be missing. And how would one tell the difference between the Standard Edition and the Express Edition based on this?
Thanks.
View 1 Replies
View Related