Bar Chart Scale
Sep 7, 2007
Can you have different scales on a bar chart. I want to chart sales and quantity. Oracle lets you label the top of the bar chart as money and the bottom as quantity.
I am dividing my sales by one million and quantity by one thousand to make them similar in size on the same chart. I am using the sum of the sales/1000000 as a point label. Is there any way to limit the number of decimal places displayed. Currently it is displaying something like 1.94889312043; 1.95M would be better.
Thank you.
View 2 Replies
ADVERTISEMENT
Mar 30, 2007
Hi
I need to scale barchar or any other chart in sql server 2000
i need to know the possiblity of this in SQl 2000
Regards
View 2 Replies
View Related
Jan 21, 2007
Hi there,
I have a case. I have 3 numeric fields and 1 category field to be displayed on bar chart reports. the problem is 2 of the 3 numeric fields have significant different scale value. so I need to add additonal scale at the right side of bar chart to represent 1 numeric fields + the 2 other numeric fields at the left side scale (Y). Please advice. Thanks.
R'gards
Toni
View 1 Replies
View Related
Aug 8, 2006
I have a stored procedure which will bring me back the Min, Max and Mean of different result sets. What I want to do with the Y-Axis is set the Min scale value of the chart to be Min -%5 and the Max scale value to be Max + 5%.
Is there a way to change the Y-Axis values at report run time without spitting my own RDL?
View 4 Replies
View Related
Nov 12, 2015
Is there a possibility in SSRS to have One stacked bar of cumulative sum of different ID's and and Line Chart at left hand of the Bar which will show the Progress as soon as the ID turn to Competed status.
I have been trying to do this , however there is huge problem of scaling:
The line should be finished at all the completed ID's SUM which is the lowest stack of the Bar.
However , the bar gets stretched to all of the space.
I have tried to place it into Tab lix, But it doesn't work.
View 3 Replies
View Related
May 3, 2007
Hi,
I have a report based on a line chart.
The values on X-axis are scaled from -100 to +100. I want to colour the band from -100 to 0 with red colour and that from 0 to +100 in green colour, and i want to provide legend for these bands/sections. How can i do this?
A prompt response would be really appreciated
Thanks a lot!!
Simranjeev
View 1 Replies
View Related
Sep 11, 2015
I have an stacked chart with line with markers. The scale on the right side is the finished good which has a min qty of 383 while the highest is 52439. how can i set this scale that start from 0 to 300 and soon. right now under scale properties I set the max to 60000, the min is set to auto while in the interval properties i set this to 10000. How this line marker adjust the scale quantity (fisnished good).
View 2 Replies
View Related
Feb 28, 2008
Hello,
I need to know what means are available to change the Minimum and Maximum Y-Axis scale values rather than leave them simply as they are in the properties.
Right now whatever min/max values I enter into the scale for the Y-Axis are unchangeable.
I need to be able to change the min/max scale values based on the value of the data at run time.
Any help is appreciated.
Thanks.
View 6 Replies
View Related
Feb 15, 2008
I have a line chart which works great except when the x axis displays duplicate months. I have tried format codes of MM-YYYY and MMM and have the "numeric or time-scale values" checkbox checked. The data displays fine but the X axis in the case of the MMM format code displays as:
Sep Oct Oct Nov Nov
leaving the user to wonder where exactly does October and November start...
I've googled around but don't see off-hand what I am doing wrong. I am display 3 simultaneous lines if that matters...
Thanks!
Craig
View 4 Replies
View Related
Nov 24, 2015
I'm using a bullet chart in a SSRS report and I want to set the Maximum value in the Linear Scale properties to highest value of the following 4 fields. Is there any way to do this?? This will make all charts line up properly.
NC_LAST_YEAR
NC_LINKED
NC_CURRENT
NC_PLAN
View 5 Replies
View Related
Mar 26, 2007
Hello All,
I have a reporting services report in the form of a chart. I have two datafields on the chart.
I need to be able to dynamically hide one datafield and view the chart for the other one and vice versa.
How do I do this ?
Any help would be appreciated..
Thanks!
View 4 Replies
View Related
Jul 17, 2014
When I export the report in excel format the chart is displayed as picture. I want it to be displayed as editable chart.Does Office Writer work in this situation and did anyone use Office Writer to accomplish same type of problem.Is there any other method or product we can use instead of the office writer.
View 2 Replies
View Related
Feb 13, 2012
I have a report designed in SSRS 2008 R2.My issue is that the data labels do not stay outside the bars for high values.
View 4 Replies
View Related
Oct 21, 2015
I need to create a chart with the following features
1) Bar chart that has data for 3 years (3 series)
2) Line chart that has the same data as per the above points on the bar chart but this is a running total. (3 series)
3) These data points are for the 12 months
4) there should be a secondary axis for the cumulative one
Can I create this using the same data set?
View 6 Replies
View Related
Mar 27, 2008
Hi Guys..
i don't know weather is it possible or not..but Can any One tell's me How can i refresh the Chart Values.. acutally what's happening..
i have two Chart in a reprot .. One is Main Category and other one is SubCategory... acutally what i want.. in Main Category chart sum of Quantities of Subcategory values comes in bar or any other format.. and when i click on Main chart any bar it's refresh the other chart and return the result of subcategory under that main category in details...
i don't know is this possible .. acutally i m very new in reproting.. infact that's my first report.. so i want to do this.. if any article or any help anyone can provide me..
Thanks
View 1 Replies
View Related
Sep 14, 2007
Hi,
I am not getting Mining Accuracy Chart and Min ing Model Prediction
Plz tel me how to do.And how to use the filter input data used to generate the lift chart and
select predictable mining model columns to show in the lift chart
View 1 Replies
View Related
Nov 8, 2004
Hello,
I have been trying to develop an automatic way of programmatically accessing datasources and performing some predefined(-supported) processing on them.
The question I would like to ask you people has to do with numeric fields. What exactly is precision? Is it the maximum length in digits of a field, or is there more to it? What about a "field's scale", what is it and how does it affect a field's value handling?
Thank you very much,
Dave
View 1 Replies
View Related
Aug 6, 2007
I have set the output columns to decimal and data scale of 2. And have also set the field to be 0.00, and in the csv desination file it always puts .000000, How can I get it to be 0.00?
Thanks you for the help
View 4 Replies
View Related
Jun 27, 2001
This is not a real big deal, cause I worked around it.. but I just tried to INCREASE the scale on a decimal column & got an arithmatic overflow error. I can understand why this would occur if trying to decrease the scale, but not increasing it. This is not a computed column.. why does SQL give an overflow error if all it has to do is add a couple of zeros to the end? Yes, I know SQL considers them to be different data types, but this is still confusing me.
View 2 Replies
View Related
May 5, 2004
I'm considering options for a large scale data warehouse. Even though SQL can theorectially scale to 10 Terabytes plus, in practice - will it be able to do it? Has anyone else actually done it? Or should Oracle be used?
View 4 Replies
View Related
Mar 29, 2007
Hi, how do I change the scale of x axis to a larger time scale than the data ?
Data is in quarters and I want that to be displayed in a line graph, but I want the labels to show hours
(it becomes messy otherwise when showing several days)
Thank You,
Regards
Göran
View 4 Replies
View Related
Dec 7, 2007
Hi , i am receiving data froma flat file it is
These are amount fields
123456.89
i am selecting numeric (8,2) as datatype is this valid please let me know.
View 3 Replies
View Related
Jan 18, 2008
Our topology:
Internal corporate network domain utilizing Integrated Windows Authentication between local workstations and the web and database servers. (domain similiar to: http://reports.ourdomain.com)
Machine #1: Windows 2003 Server w/SQL Server 2005 (SP2 and hotfixes applied) running SSRS.
Machine #2: Windows 2003 Server w/SSRS only. (pointing to the SQL DB on Machine #1)
Machine #3: Windows 2003 Server w/SSRS only. (pointing to the SQL DB on Machine #1)
Device #1: Arrowpoint load balancer for Machines #2 & #3 (w/sticky sessions).
We recently added 2 web servers and configured them to load balance the web requests to a seperate SQL Server machine. (the load balancing is done thru an Arrowpoint device not Microsoft NLB)
The installation of reporting services (on Machine #2 & #3) went smoothly and the configuration was a breeze. But we could not access the "http://reports.ourdomain.com/Reports" directory for reporting services on the 2 web server machines. We received the "401.1 - Unauthorized" http error.
Since we were using a domain name to access the report server we made sure to update the <URL> tag in the config files.
File location 1:
C:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesReportManagerRSWebApplication.config
<ReportServerUrl>http://reports.ourdomain.com/ReportServer</ReportServerUrl>
File location 2:
C:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesReportServer
sreportserver.config
<UrlRoot>http://reports.ourdomain.com/reportserver</UrlRoot>
We still received the error, so then we added a couple of entries to the HOSTS file on each web server:
File location -->
C:WINDOWSsystem32driversetcHOSTS
In order for the load balancers to "see" themselves from the domain reference we had to update the HOSTS file
on each web server to have the domain name "reports.ourdomain.com" point to the IP Address of the specific web server.
(we also added the IP of Machine #1 just to be safe):
MACHINE #2's HOSTS file:
127.0.0.1 localhost
10.10.0.1 Machine1
10.10.0.2 reports.ourdomain.com #IP of Machine2
MACHINE #3's HOSTS file:
127.0.0.1 localhost
10.10.0.1 Machine1
10.10.0.3 reports.ourdomain.com #IP of Machine3
Then the web servers were able to authenticate the users using IWA and NTLM
and we could access the report servers normally. Even the the scheduled reports
were being load balanced and emailed from the web servers which we didn't
expect to happen. (pretty cool!)
I hope this helps someone else as it tooks us about 4 days to figure this out.
View 1 Replies
View Related
Feb 19, 2002
I am using the statement below to calculate the average scores of the columns. When the result set is returned I would like to have a scale of 2. I am currently returning a scale of 6. What could I do to fix this?
Thanks for you help,
John
SELECT ((CONVERT(decimal(4,2),c2_3) + CONVERT(decimal(4,2),c2_15) +
CONVERT(decimal(4,2),c2_16) + CONVERT(decimal(4,2),c2_17)) / 4 * 100) AS Score_A
FROM dataquestionnaire
WHERE confirmation = '10/1/2001-999-1'
View 1 Replies
View Related
Oct 19, 2005
We're about to put together a db solution for storing and searching large quantities of documents, with SAS running on top of it. Ultimately this is going to be a data mining project. We're talking about 2 million docs per year, ranging from 1 to possibly hundreds of pages of text per doc. We'll be pulling down roughly 40,000 docs per week, most likely XML, HTML, or SGML format. The user base is actually pretty small - probably no more than 5.
My gut feeling is to go with DB2, but to be fair I wanted to see if SQL 2005 would be up to the task. I'm not very familiar with the current version, but I udnerstand there have been some big improvements in scalability. It is the policy of SAS not to make recommendations. Does this sound like something SQL 2005 could do well, or should I stick with my initial plan and use DB2?
View 1 Replies
View Related
Jun 4, 2004
Hi All,
Is there a way to set a MONEY datatype to a scale (decimal places) of 2?
The default is set to 4 and I can't seem to find any resources on how to change it.
Do I have to add a check constraint to manually round to 2 decimals??
That seems unneccessary.... but if it is, boo-urns to sql server.
thanks!
View 1 Replies
View Related
Sep 5, 2007
I have a question about Report services scale out deployment.
In the technet document it states that reporting services must be Enterprise edition for scale out deployment functionality, does anyone know if the database engine has to be Enterprise also, or can it be standard edition?
Here is the article excerpt from technet:
The Reporting Services edition must be Enterprise, Developer, or Evaluation. Standard edition does not support a scale-out deployment. You can create a scale-out deployment using a combination of editions as long as the edition supports the scale-out feature.
Future guru in the making.
View 3 Replies
View Related
Jun 22, 2006
I have a UDF
using System;
using System.Data;
using System.Data.SqlClient;
using System.Data.SqlTypes;
using System.Diagnostics;
using System.Text;
using Microsoft.SqlServer.Server;
public partial class UserDefinedFunctions
{
[SqlFunction(DataAccess = DataAccessKind.Read)]
public static SqlDecimal GetCustomPrice(SqlGuid Item_Key, SqlGuid Company_Key)
{
SqlDecimal retvalue = new SqlDecimal();
try
{
StringBuilder sqlstr = new StringBuilder();
sqlstr.Append("SELECT A.Price ");
sqlstr.Append("FROM Price A ");
sqlstr.Append("JOIN Link_Table B ");
sqlstr.Append("ON A.Price_Key = B.FKey ");
sqlstr.Append("JOIN Lookup C ");
sqlstr.Append("ON B.Lookup_Key = C.Lookup_Key ");
sqlstr.Append("AND C.Group_Name = 'Price_Type' ");
sqlstr.Append("AND C.Value = 'Custom' ");
sqlstr.Append("JOIN Item D ");
sqlstr.Append("ON B.PKey = D.Item_Key ");
sqlstr.Append("JOIN Link_Table E ");
sqlstr.Append("ON A.Price_Key = E.FKey ");
sqlstr.Append("JOIN Lookup F ");
sqlstr.Append("ON E.Lookup_Key = F.Lookup_Key ");
sqlstr.Append("AND F.Group_Name = 'Price_Type' ");
sqlstr.Append("AND F.Value = 'Custom' ");
sqlstr.Append("JOIN Company G ");
sqlstr.Append("ON E.PKey = G.Company_Key ");
sqlstr.Append("WHERE D.Item_Key = @Item_Key ");
sqlstr.Append("AND G.Company_Key = @Company_Key");
using (SqlConnection conn = new SqlConnection("context connection=true;"))
{
conn.Open();
SqlCommand cmd = new SqlCommand(sqlstr.ToString(), conn);
SqlDataAdapter adap = new SqlDataAdapter(cmd);
SqlParameter para = new SqlParameter();
para.ParameterName = "@Item_Key";
para.SqlDbType = SqlDbType.UniqueIdentifier;
para.SqlValue = Item_Key;
cmd.Parameters.Add(para);
para = new SqlParameter();
para.ParameterName = "@Company_Key";
para.SqlDbType = SqlDbType.UniqueIdentifier;
para.SqlValue = Company_Key;
cmd.Parameters.Add(para);
DataSet ds = new DataSet();
adap.Fill(ds);
if (ds.Tables.Count > 0)
{
if (ds.Tables[0].Rows.Count > 0)
{
retvalue = SqlDecimal.ConvertToPrecScale(new SqlDecimal((decimal)ds.Tables[0].Rows[0]["Price"]),12,3);
}
}
}
}
catch (Exception e)
{
throw e;
}
return SqlDecimal.ConvertToPrecScale(retvalue, 12, 3);
}
};
The value in the record is a decimal 12,3 which is 0.950 and when it is returned from this UDF it is 1. Using the debuger the value is 0.950 until it gets to the calling program were it
is 1. I have looked for an answer all over the place with not much luck Can anyone help I will be in their debt.
Thanks
Larry
View 1 Replies
View Related
May 21, 2007
I want to display a chart with a minimum y-axis of -10%. When use the value -0.10 the result is a minimum of -100%. Is this a bug?
-Jeroen
View 2 Replies
View Related
Jun 27, 2006
Hi,
I'm attempting to constrct a bar chart with the Gray Scale Plaette. All the other plaette works fine. However, for the gray scale one, the patterns just go random. It doesn't follow the legend. Have I done something wrong here?
If there is no way to get around this, can I construct one manually? Just wonder how can I do that, cos I want to get some report printed out.
Thanks,
Josh
View 6 Replies
View Related
Dec 19, 2006
How do I set Precision and Scale in a calulated column?
I'm trying to limit the decimal points returned in a calculated column but can't find where to set the scale. What am I missing please?
Thanks,
Scott
View 6 Replies
View Related
Oct 17, 2001
I am working with an off the shelf app that controls decimal places through the application. All columns underlying the apps 'numeric' fields are floats. We are writing some scripts that need to compare numbers and some of them look like the second row
KELLYJ 2.1233
DONOVM 1.6000000000000001
OLSSON 15.3750
I have tried using round and cast. My examples work like the following:
SELECT 27.719999999
SELECT CAST(ROUND(27.719999999,4) AS DECIMAL(50,4))
When I try the same against a column to update the entire table it leaves the rows like above as longer to the right of the decimal point.
Any pointers on how to get these numbers back to 4 decimals places would be much appreciated
View 3 Replies
View Related
Sep 1, 2013
I have a varchar(len=9) field that I want to cast as numeric(9,2). Some of the field values are null but some have valid values (ie 1.00 or .05).
I am selecting data from one table and then updating a different table.
I have a select statement within an insert statement and then an update statement. I've tried a cast statement but not successfully. I get the following error.
[Execute SQL Task] Error: Executing the query "Exec sp_ESTLoadPOData" failed with the following error: "Error converting data type varchar to numeric.". Possible failure reasons:
Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
View 3 Replies
View Related
