Basic SQL: Multiple AND/OR Nightmare In SELECT Statement
Aug 9, 2006
This is more of a basic SQL question rather than anything specific for T-SQL, but I assume someone here can help me...
I have a problem with properly combining a lot of AND and ORs in a SELECT statement in a stored procedure in order to get the desired results. The problem is that I want to have all results that fullfill all of the supplied conditions: InstitutionCode, CollectionCode, ScientificName, Locality (unless they are null, hence 'coalesce') and the Parentid, that can be in one of eight columns.
SELECT * FROM QueryView WHERE InstitutionCode = COALESCE(@museum, InstitutionCode) AND CollectionCode = COALESCE(@collection, CollectionCode) AND ScientificName LIKE '%' + @binomen + '%' AND Locality LIKE '%' + @locality + '%' AND ParentID1 = COALESCE(@taxparent, ParentID3) OR ParentID2 = COALESCE(@taxparent, ParentID2) OR ParentID3 = COALESCE(@taxparent, ParentID3) OR ParentID4 = COALESCE(@taxparent, ParentID4) OR ParentID5 = COALESCE(@taxparent, ParentID5) OR ParentID6 = COALESCE(@taxparent, ParentID6) OR ParentID7 = COALESCE(@taxparent, ParentID7) OR ParentID8 = COALESCE(@taxparent, ParentID8)
The current construction, however, gives me all results that fullfill either on of the four conditions, or the parentid in one of the columns. putting parentheses around parentid part gives me zero query results. I understand that the ORs should be restricted to the parentids and not the rest, but putting parentheses around parentid part gives me zero query results.
Has anyone got a good tip to help me resolve this puzzle?
View 6 Replies
ADVERTISEMENT
Apr 25, 2007
I have an sql data source..select command is something like this.
Select password from users where username = Username.Text
how can i retrieve the password value and save it into a string?! to make a comparison between password value and a textbox Password.Text
i know its a silly question but i took me long time and i still can't find the ans
View 3 Replies
View Related
May 2, 2004
If I want to select certain values from a table where date is equal to something and the second field is null,would I go.
select * from table where date = 'something' and Sent = null or something else because if I do it this way I get nothing as a result but if I scroll down I can see that I have null values.
thanks
View 4 Replies
View Related
Aug 29, 2006
I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly. My problem is that the table I am pulling data from is mainly foreign keys. So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys. I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit. I run the "test query" and everything I need shows up as I want it. I then go back to the gridview and change the fields which are foreign keys to templates. When I edit the templates I bind the field that contains the string value of the given foreign key to the template. This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value. So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors. I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode. I make my changes and then select "update." When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing. The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work. When I remove all of my JOIN's and go back to foreign keys and one table the update works again. Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People]. My WHERE is based on a control that I use to select a person from a drop down list. If I run the test query for the update while setting up my data source the query will update the record in the database. It is when I try to make the update from the gridview that the data is not changed. If anything is not clear please let me know and I will clarify as much as I can. This is my first project using ASP and working with databases so I am completely learning as I go. I took some database courses in college but I have never interacted with them with a web based front end. Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian
View 5 Replies
View Related
May 8, 2014
I am trying to apply the logic from the following resource: URL....but cannot get it to work with my logic for some reason.For example, the following query:
;WITH CTE1 AS (SELECT CONVERT(VARCHAR, GETDATE(), 120) AS Col1),
CTE2 AS (SELECT CONVERT(VARCHAR, GETDATE(), 111) AS Col2)
SELECT CTE1.Col1,CTE2.Col2
FROM CTE1
CROSS JOIN CTE2
GO
Produces the following output:
Col1 | Col2
2014-05-08 10:55:54 | 2014/05/08
But, as soon as I try to do something else like:
;WITH CTE1 AS (SELECT COUNT(login) FROM userinfo AS Col1),
CTE2 AS (SELECT COUNT(login) FROM userinfo AS Col2)
SELECT CTE1.Col1,CTE2.Col2
FROM CTE1
CROSS JOIN CTE2
GO
I receive the following errors:
Msg 8155, Level 16, State 2, Line 1
No column name was specified for column 1 of 'CTE1'.
Msg 8155, Level 16, State 2, Line 2
No column name was specified for column 1 of 'CTE2'.
Are there limitations when trying to use multiple CTE in a single query?
View 5 Replies
View Related
Apr 29, 2015
SELECT FirstSet.Country,FirstSet.[Month]
,ABC.ABC1
,DEF.DEF1
FROM (
SELECT [Answer Text]'Country',interview_start 'Month',[ID respondent],
[Code] ....
I didn't find whats problem with this code. Actually I try to create a select statement with with cte select statement. In cte clause my output ok but when I try to receive that output from write another select statement then its show error.
Msg 102, Level 15, State 1, Line 276
Incorrect syntax near ';'.
Msg 102, Level 15, State 1, Line 315
Incorrect syntax near ')'.
Msg 156, Level 15, State 1, Line 351
Incorrect syntax near the keyword 'as'.
View 8 Replies
View Related
Mar 1, 2005
I am using SQL sever 2k and C#.
There is a stored-procedure that it has multiple select statements as returned result set. How can I use SqlCommand.ExecuteReader to get all result set?
What if the multiple select statements is " FOR XML", how can I set all xml using ExecuteXmlReader?
I tried to use ExecuteReader or ExecuteXmlReader, but seems that I can only get back the result set of the first select statement, all others are messed up.
stored procedure example: NorthWind database:
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_NULLS ON
GO
Create PROCEDURE dbo.getShippersAndEmployeesXML
AS
select * from Shippers for xml auto, elements
select * from Employees for xml auto, elements
RETURN @@ERROR
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
C# code example:
//set connect, build sqlcommand etc
XmlTextReader reader = (XmlTextReader)command.ExecuteXmlReader();
StringBuilder sb = new StringBuilder();
while(reader.Read()) sb.Append(reader.ReadOuterXml());
Thanks for your help.
View 2 Replies
View Related
Aug 29, 2006
hi
first of all is it possible? if so, what am i doing wrong with this
INSERT into TB2
(
ClientCode,
EngagementCode,
EngagementDescription
)
SELECT
(SELECT dbo.tarCustomer.CustID
FROM dbo.tPA00175 INNER JOIN
dbo.tarCustomer ON dbo.tPA00175.CustKey = dbo.tarCustomer.CustKey INNER JOIN
dbo.tPA00007 ON dbo.tPA00175.intJobKey = dbo.tPA00007.intJobKey),
NULL,
SELECT
(SELECT dbo.tPA00175.chrJobNumber
FROM dbo.tPA00175 INNER JOIN
dbo.tarCustomer ON dbo.tPA00175.CustKey = dbo.tarCustomer.CustKey INNER JOIN
dbo.tPA00007 ON dbo.tPA00175.intJobKey = dbo.tPA00007.intJobKey)
the first select statement for works fine, but the second one and all after i get a syntax error near 'select'.
this is just a shortened version of the statement. how would i run select statements for a table to be inserted into with different column names. also with items that are hard coded like the 'null'. thanks
tibor
View 5 Replies
View Related
Nov 14, 2013
i have a table named masterlist wherein the columns are :
name-----age------sex
andrew---19-------male
trisha---23------female
and i have also another table which is namelist that is linked to the masterlist table.. after i search for the record andrew in the table namelist..i updated andrew as 25 and sex is female..now i want reset andrew's record, same to the records that andrew has in the table masterlist..
View 3 Replies
View Related
Mar 9, 2004
I have a user login scenario where I would like to make sure that they not only exist in the user table, but also make sure there account is "verified" and "active". I'm trying to return 3 output parameters. UserID, verified, active. Is this possible?
Do I need just a select statement to do this? What is the difference between the output and select statements?
Thanks in advance.
View 1 Replies
View Related
Jul 30, 2007
I'm trying to create an interface for filtering profiles from an SQLServer 2005 database using an html form. The form allows filtering based on a minimum level required in between one and four different columns. The first (and only mandatory) column to be filtered on has its name hard-coded into the base query. In trying to get the other three possible criteria to work, I've taken several approaches, all of which failed.The other three potential criteria are selected from a drop down menu on the form and ideally these choices are passed into a query to be used as column names. My first attempt looked like this: query = "SELECT * FROM profiles_tbl WHERE (EngSkill >= @english)" .... if ReqSkill1 <> "" then level1 = Convert.ToInt32(Request.form("minskilllvl1")) query = query & pickclmleft & ReqSkill1 & pickclmright1 cmd.Parameters.Add("@ReqSkill1", SqlDBtype.text) cmd.Parameters("@ReqSkill1").value = ReqSkill1 cmd.Parameters.Add("@level1", SqlDBtype.int) cmd.Parameters("@level1").value = level1 end if above If statement was repeated for 2nd and 3rd optionsSecond approach was to remove all parameters from sections of the query that were appended onto the original statement. This involved lots of strings containing AND clauses with hard-coded column names which were appended on when the corresponding option was selected in the form. Code looked like this: query = "SELECT * FROM profiles_tbl WHERE (EngSkill >= @english)" ASPqry = " AND (ASPlevel >= " try con = new SqlConnection() con.ConnectionString = “**************string was correct****************� cmd = new SqlCommand() cmd.Parameters.Add("@english", SqlDBtype.int) cmd.Parameters("@english").value = english if ReqSkill1 <> "" then if ReqSkill1 = "ASPlevel" then query = query + " AND (ASPlevel >= " level1 = Convert.ToInt32(Request.form("minskilllvl1")) if level1 = 0 then query = query + "0)" end if if level1 = 1 then query = query + "1)" end if if level1 = 2 then query = query + "2)" end if if level1 = 3 then query = query + "3)" end if end if end ifFinally when this too failed, I created four entirely separate queries, detected how many criteria were used, and used the appropriate query, passing necessary skill level in as a parameter. I'll provide code if needed here. Queries were written as strings and then used to set the CommandText property for an SqlCommand variable. I think it's important to note that in all cases the most basic version of the query worked. In the first, if only the first criteria was used the statement executed fine. Same in the second. In the third, whatever query could be assigned first (even though only one could be assigned because of logical structure of if statements) worked and none of the others would. This last case was tested even with completely hard-coded queries that SQL Server 2005 validated as correct and would run. Any help is greatly appreciated. Will post as much code as people want/need, and if I can get any one of these methods working I'll be thrilled. I have no need for all three. A.S. Moser
View 4 Replies
View Related
May 18, 2006
Hello:
I need assistance writing a SELECT statement. I need data from a table that matches one (or more) of multiple criteria, and I need to know which of those criteria it matched. For instance, looking at the Orders table in the Northwind database, I might want all the rows with an OrderDate after Jan 1, 1997 and all the rows with a ShippedDate after June 1, 1997. Depending on which of those criteria the row matches, it should include a field stating whether it is in the result set because of its OrderDate, or its ShippedDate. One way of doing this that I've already tried is:
SELECT 'OrderDate' AS [ChosenReason], Orders.*FROM OrdersWHERE OrderDate > '1-1-1997'UNIONSELECT 'ShippedDate' AS [ChosenReason], Orders.*FROM OrdersWHERE ShippedDate > '6-1-1997'
In my application, scanning a table with thousands of records for five sets of criteria takes a few seconds to run, which is not acceptable to my boss. Is there a better way of doing this than with the UNION operator?
Thank you
View 2 Replies
View Related
Nov 15, 2012
I am in doubt if its possible to make a select statement which enables me to consolidate multiple lines in the same table.
I have a table with a lot of companies and figures for each company.
Some of the companies owns some of the other companies in the table and in reverse, some of the companies are owned by some of the companies in the table.
I have a lot of columns, but basically the most important columns are:
Company Name, Company Mother , Company Daughter.
Each company has also a revenue column.
What I want to do is to consolidate all figures for absolute mothers e.i. companies which are not owned by another company in the list.
I therefore need a select statement which says something like:
Get the revenue of companies not owned by another company (e.i. absolute mother). Add to this, the revenue of all its daughters. Add to this the revenue of all the daughters daughters etc. until there are no daughters left.
In other words - aggregate the revenue for all the companies in the group under the name of the ultimate parent company.
I can easily select and add the revenue for the first level of direct daughters, but I dont know how many more daughters the daughters has etc.
View 2 Replies
View Related
Nov 26, 2015
I am writing a query and have the bulk of it already written.Â
I am looking at a table that contains customer orders. There is a column named Customer_Order.Status Available values for this column is R, F, H, and C.
I'd like for my query to return all lines that have the value R, F, H.
My where clause is written like thisÂ
WHERE CUSTOMER_ORDER.SITE_ID = 'XXX' AND CUSTOMER_ORDER.STATUS = ('R','H','F')
I know I'm missing something....
View 3 Replies
View Related
Aug 18, 2015
how we can replace the multiple values in a single select statement? I have to build the output based on values stored in a table. Please see below the sample input and expected output.
DECLARE @V1 NVARCHAR(100)
SELECT @V1 = 'FirstName: @FN, LastName: @LN, Add1: @A1, Add2: @A2 '
DECLARE @T1 TABLE
(FN VARCHAR(100), LN VARCHAR(100), A1 VARCHAR(100), A2 VARCHAR(100))
[code]....
View 7 Replies
View Related
Feb 12, 2014
I have created a trigger that is set off every time a new item has been added to TableA.The trigger then inserts 4 rows into TableB that contains two columns (item, task type).
Each row will have the same item, but with a different task type.ie.
TableA.item, 'Planning'
TableA.item, 'Design'
TableA.item, 'Program'
TableA.item, 'Production'
How can I do this with tSQL using a single select statement?
View 6 Replies
View Related
Jan 9, 2008
Hi,
I have written a basic UPDATE statement to update two fields in one table using a where clause to identify the record i wish to update. i.e.
UPDATE TableName SET field1=1234, field2='' WHERE primary_key=N'1234';
When i run the statement, in the results window i get a value returned that is equal to the total number of records in that table!! i.e.
(No column name)
--------------------------
588061
but when i check the table, indeed only one record has been updated as expected (and i have confirmed this by using SELECT @@ROWCOUNT straight after)
My question is, why does it do this?? i paniced at first as i thought i had updated ALL rows, but luckily this seems not to be the case.
And can i turn this off??
Many thanks,
Martin
View 5 Replies
View Related
Sep 3, 2007
Hello... im having a problem with my query optimization....
I have a query that looks like this:
SELECT * FROM table1
WHERE location_id IN (SELECT location_id from location_table WHERE account_id = 998)
it produces my desired data but it takes 3 minutes to run the query... is there any way to make this faster?... thank you so much...
View 3 Replies
View Related
Aug 1, 2001
Hi,
I'm new to SQL and learning, so please forgive my question....
I have two tables; Authors and Books with the fields as shown below. Each author will have 1 or more books listed in the Books table.
I need a SELECT statement that will GROUP all authors and return 1 record per author with the LAST published book fields for each author (most recent PubDate) from the Books table. All fields on both tables should be returned:
AuthorID, FullName, Country, BookID, BookName, PubDate
Can anybody help me w/ this?
Thanks in advance!!!!!!!!!
George.
Authors
=======
AuthorID
FullName
Country
Books
=======
BookID
AuthorID
BookName
PubDate
View 7 Replies
View Related
May 26, 2008
Hello All,
I have what i believe to be a pretty basic SQL question. I have 2 tables, One called participant, and another called cnAvailableParticipant_List they are related with a field called userid I would like to select the firstname, lastname, userid, fields from the participant table and the dnnuserid field from the cnAvailableParticipant_List table where the users have a record in the participant table but do NOT have a record in the other table. Basicially i want to select all the users who are essentially not checked in. So far i have:
SELECT p.ParticipantID as ID, p.FName as FName, p.LName as LName, ap.DNNID FROM Participant p, cnAvailableParticipant_List ap
WHERE
ORDER BY LName, FName
can someone explain to me what i need in the where clause and why. I don't just want the answer, i would like to know why it works the way it does as well. Sorry for the basic question but im new to SQL
Thanks all help is appreciated,
John
View 7 Replies
View Related
May 1, 2007
Basically, im being asked Which is the maximal budget of projects in which employee 'John Smith' is involved?
I got a nested query done kinda right, like this
Select max(Budget)
From aProject
Where (aProject.Pid = (
Select Pid
From aWorks_For
Where aWorks_For.Eid = (
Select Eid
From aEmployee
Where Ename = 'John Smith')))
But when an employee is working on more then one project I get this error
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
Heres my Create Table Statements
Any help would be appreciated
CREATE TABLE EMPLOYEE ( EId INT, EName VARCHAR(20), Salary INT, PRIMARY KEY (EId) )
CREATE TABLE WORKS_FOR ( EId INT, PId INT, PRIMARY KEY (PId, EId) )
CREATE TABLE PROJECT ( PId INT, PName VARCHAR(20), Supervisor VARCHAR(20), Budget INT, PRIMARY KEY (PId) )
View 11 Replies
View Related
Apr 27, 2015
Make a few simple pages to enter data into multiple tables in my SQL DB.
I have the DB designed and IIS setup but I am trying to wrap my head around the php connection to the DB and then relating the tables/columns in the "Input" page.
After this is done I will use SRS to use these entries to show reports hourly.
View 4 Replies
View Related
Aug 19, 2015
I need to insert a sparkline based on values in columns. I cannot insert a image - seems my account must be verified (whatever that means).Basically what I need is a sparkline that is created based on columns for each row. Like in Excel.I have seen a similiar question here URL.. forum=sqlreportingservices).
View 12 Replies
View Related
Jul 17, 2007
Hi! I am trying to do something that I would think should be rather simple.I have a SQLDataSource that has a simple select statement.I have a String Variable st_tempI know my SQLDataSource returns only one value, and it's a string.HOW DO I DO somehitng like st_temp=SQLDataSource.Select;I am getting nothing but errorrs Thanks in advance Dan
View 4 Replies
View Related
Aug 19, 2005
Hi,I feel stupid for posting this question but I cannot find out how to create an SQL statement to return records that have been added today.My database table has a field called calldate which hold the date and time of the record added to the database i.e. "02/08/2005 16:55:41".Please can someone let me know how I can search to find all records added today. I thought it would be something like it, but I assume I need to format the calldate so it's just 02/08/2005.Select *From TableWhere CallDate = GetDate()ThanksBrett
View 9 Replies
View Related
Nov 5, 2007
I am learing VWD as I build a site and while I can use the various controls (GridView, FormView) to set up operations and retrieve/display database information, I need to be able to codebehind to do SQL operations for retrieving data to fill paper forms and to modify the database. After I retrieve data from the database, I need to do a lot of computation befor I build a paper quote that is emailed to a customer. I have written a subroutine to which I pass my sql query statement and I can add a new entry and edit an existing entry. The problem is a simple query to read an existing database entry.
If I write a simple command : Cmd = SELECT PartNumber, PartName, PartsAvailable FROM Inventory WHERE PartNumber = "P7226" , the command is executed but the return data falls on the floor somewhere as I dont know how to code to put the results in an array or in fact, have any idea on how to find the returned data. Can anyone help with this simple(?) problem? My sub that handles the sql command is shown below.
I have also been looking for the way to code in VB to cause existing controls like GridViews to access, edit, and insert but I havent been able to find a paper or tutorial. If anyone has seen this information, it would be helpful also.Protected Sub CallSQL(ByVal Cmd As String)
Dim conn As New SqlConnection("Data Source=.SQLExpress;AttachDbFileName=C:Documents and SettingsaMy DocumentsVisual Studio 2005WebSitesWebSite5App_DataPINEMgt.mdf; Integrated Security=True;Connect Timeout=30;User Instance=True") 'Data Source=.SQLEXPRESS;AttachDbFilename="C:Documents and SettingsaMy DocumentsVisual Studio 2005WebSitesWebSite5App_DataPINEMgt.mdf";Integrated Security=True;Connect Timeout=30;User Instance=True)Dim sql As String = String.Empty
sql = Cmd
'Open the connection to the database and execute he SQL
conn.Open()Dim command As New SqlCommand(sql, conn)
command.ExecuteNonQuery()
conn.Close()
End Sub
View 6 Replies
View Related
Jan 9, 2015
Ok I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.
View 4 Replies
View Related
Jul 20, 2005
hiI need to write a stored procedure that takes input parameters,andaccording to these parameters the retrieved fields in a selectstatement are chosen.what i need to know is how to make the fields of the select statementconditional,taking in consideration that it is more than one fieldaddedfor exampleSQLStmt="select"if param1 thenSQLStmt=SQLStmt+ field1end ifif param2 thenSQLStmt=SQLStmt+ field2end if
View 2 Replies
View Related
Oct 29, 2007
Hi guys,
I have the query below (running okay):
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
FROM myTables
WHERE Conditions are true
ORDER BY Field01
The results are just as I need:
Field01 Field02
------------- ----------------------
192473 8461760
192474 22810
Because other reasons. I need to modify that query to:
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
INTO AuxiliaryTable
FROM myTables
WHERE Conditions are true
ORDER BY Field01
SELECT DISTINCT [Field02] FROM AuxTable
The the results are:
Field02
----------------------
22810
8461760
And what I need is (without showing any other field):
Field02
----------------------
8461760
22810
Is there any good suggestion?
Thanks in advance for any help,
Aldo.
View 3 Replies
View Related
Jul 4, 2006
Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E
can any one help me in this?
please give me a sample query.
Thanks and Regards,
Kiran Suthar
View 7 Replies
View Related
May 5, 2015
I am attempting to run update statements within a SELECT CASE statement.
Select case x.field
WHEN 'XXX' THEN
 UPDATE TABLE1
  SET TABLE1.FIELD2 = 1
 ELSE
  UPDATE TABLE2
  SET TABLE2.FIELD1 = 2
END
FROM OuterTable x
I get incorrect syntax near the keyword 'update'.
View 7 Replies
View Related
Jul 24, 2012
Write a CREATE VIEW statement that defines a view named Invoice Basic that returns three columns: VendorName, InvoiceNumber, and InvoiceTotal. Then, write a SELECT statement that returns all of the columns in the view, sorted by VendorName, where the first letter of the vendor name is N, O, or P.
This is what I have so far,
CREATE VIEW InvoiceBasic AS
SELECT VendorName, InvoiceNumber, InvoiceTotal
From Vendors JOIN Invoices
ON Vendors.VendorID = Invoices.VendorID
[code]...
View 2 Replies
View Related
Oct 20, 2014
In the below code i want to use select statement for getting customer
address1,customeraddress2,customerphone,customercity,customerstate,customercountry,customerfirstname,customerlastname
from customer table.Rest of the things will be as it is in the following code.How do i do this?
INSERT INTO EMImportListing ("
sql += " CustId,Title,Description,JobCity,JobState,JobPostalCode,JobCountry,URL,Requirements, "
sql += " IsDraft,IsFeatured,IsApproved,"
sql += " Email,OrgName,customerAddress1,customerAddress2,customerCity,customerState,customerPostalCode,
[code]....
View 1 Replies
View Related
