Hello all expert databse administrator, i truly new to MS SQL server.
I have installed MS SQL Server 2005 and SQL Server Management Studio express edition.
An error occurred mentioned i cannot connect the sql server.
I wonder can i install Full edition of sql server and express edition of management studio.
TITLE: Connect to Server
------------------------------
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.) (Microsoft SQL Server, Error: 10061)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10061&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
Server Name = HOME-C5CCA7A162SQLEXPRESS
This is my error when i try connecting to the server.
Hello all expert databse administrator, i truly new to MS SQL server.
I have installed MS SQL Server 2005 and SQL Server Management Studio express edition.
An error occurred mentioned i cannot connect the sql server. I wonder can i install Full edition of sql server and express edition of management studio.
TITLE: Connect to Server ------------------------------
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.) (Microsoft SQL Server, Error: 10061)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10061&LinkId=20476
------------------------------ BUTTONS:
OK ------------------------------
Server Name = HOME-C5CCA7A162SQLEXPRESS
This is my error when i try connecting to the server.
After going through the Enterprise Manage mirroring setup, I get the error message ...
The server network address "TCP://MYMACH.mynet.net:5022" can not be reached or does not exist. Check the network address name and reissue the command. (Microsoft SQL Server, Error: 1418)
I have three instances of SQL Server 2005 Enterprise Edtion MSSQLSERVER (primary) endpoint 5022 MSSQLSERVER (partner) endpoint 5023 MSSQLSERVER (witness) endpoint 5024
I have enabled TCPIP and named pipes on all three protocols. In surface configuration I have enabled everything. Each instance has the -T1400 flag set. Each instance is running under mixed security. Each sql Server and sql agent instance runs exactly in the same domain account. The machine has been rebooted. The following tests all pass
I'm new to using SQL server and have a few setup questions. I'm setting up a database for the company I work for. Should I setup a different database for each division in our company (e.g. accounting, project management, estimating, etc.), or should I use just one database? It seems like it would be easier to use one database so I only have to use one connection, but is this ideal? I want all the info from the different divisions to be used together, but at this point I'm confused as to how to connect different databases together, if I were to go this way.
We have a small Ethernet LAN running SBS 2003 R2. I have installed SQL Server 2005 that came with that release on the server. I did not specify a named instance.
1) What is the name of the default instance?
2) When I go to a client computer I cannot see the SQL server instance.
For example on my PC I have VS2005. If I go to Server Explorer, all I see is the local copy of SQL Server 2005 Express I have installed on my PC. I see nothing for the server. Does the server need configuring within SQL Server to allow this. Do I need to change permisions on the folders where the SQL Server 2005 files are stored.
In short, what basic steps do I need to follow to get acces to SQL Server on my server from a client.
3) If I want to create a new named instance, do I have to do Run the whole setup again? There appears to be no managemnt tool for instances of SQL server.
I'm new to DB Mirroring, and I am trying to get it going in a test enviroment between two SQL 2005 Dev Servers. I have followed documentation that I have found but cannot get past a 1418 error when establishing a connection between the servers initially. Does anyone know of any good step by step guides that I could look at, in case I have missed something stupid.
I just installed SQL Server 2005 on Windows Vista Basic platform with just windows authentication, installation went pretty well, but when I tried to logon to the server, it gave me error "Logon failed with error code 18456".
I logged on as administrator, service for SQL server is started, but I can't logon. Can you please help.
I have XP Pro SP2 with MDAC 2.8.1022. It had a problem so I tried to reinstall MDAC and got a Fatal Setup Error. This setup does not support installing on this operating system. I downloaded MDAC 2.8 1177 and get the same error.
I thought of uninstalling/reinstalling SP2, but this is a 2 month old Dell Latitude 610 with factory installed XP. There is no Windows Service Pack 2 option listed in the Control Panel > Add/Remove Programs.
There's some other strange things, so I wonder if they are related.
1) I have Paul set up as an administrator account. Some folders like MSSQL show that account with no permissions. I grant all the permissions to Paul for that folder. I come back later and the permissions are gone.
2) I deleted 20 files in Explorer, but 7 of them did not go away. I deleted those 7 again and they instatnly reappeared. I deleted those 7 again and then they finally went away.
3) I get a slow reaction time for things like Windows Explorer and opening and closing programs. This is suprising since it has 2 gig of RAM and 2.3 Gig processor. Could it be a memory handling problem that's causing OS problems. Probably, the memory didn't handle the OS installation well and the whole system is compromised now.
We're doing upgrades from SQL 2008 R2 to SQL 2014. This is blocked due to RS is installed but not configured. Our desired action is to uninstall RS and proceed with the upgrade. But when setuparp.exe is raised, it does not list all the features on the 'Select Features' page. In fact, it only lists the last 2 shared features (SQ Client Connectivity SDK and Microsoft Sync Framework). However, all items appear to be listed on the 'Select Instance' page including RS. I've seen this issue on 2 of our SQL 2008 R2 Servers already.
I'm trying to install SQL Server Management studio 2012 on my Windows 7 (x64) standalone laptop. When I click "New SQL stand-alone installation..." it runs a Setup Support Rules check and always fails "Setup Account Privileges". I've looked into the error and I keep getting that I need to change security rules but I don't have that option in window 7. How do I get around this without having to resort to a computer running Windows Server?
I have Visual Studio 2013 premium installed along with Localdb v11. I just want to connect and manage my database engine through SSMS when developing any application.
This forum is intended for users who are new to SQL Server, and have basic usage questions. If you have setup or installation issues or questions, you should check out the Setup forum.
I am running a number of SQL instances on my PC. Within the network, I have think server with various System Center components. For compatibility reasons, some features of System Center 2012 R2 had to be delegated to different SQL databases. My question is, because there is now more than one IP address on my system, and each instance of SQL is assigned to its own IP, is there a way to setup DNS and SQL so the namespace points to the desired IP address? For Instance:
MSSQL2008 instance is set to run on = 11.12.13.1 MSSQL2012 is set to run on = 11.12.13.2 IN DNS: A Record: Mike-PC = 11.12.13.1 A Record: Mike-PC = 11.12.13.2
If I want to use MSSQL2008 by specifying Mike-PC as the DNS name, how would I do that with 100% accuracy? If there is another way to get the job done, I am more than willing to approach this differently.
This is probably a very silly question.I started learning ASP.net by following ASP.NET Unleashed. I am stuck where he wants me to open a connection to SQL Server database. I have just downloaded MSDE. But I dont know where to type this code and how to run it..so as to connect to the database.
<%@ Import Namespace="System.Data.SqlClient" %>
<Script Runat="Server">
Sub Page_Load Dim conPubs As SqlConnection
conPubs = New SqlConnection( "server=localhost;uid=webuser;pwd=secret;database=pubs" ) conPubs.Open() End Sub
</Script>
Connection Opened!
Now do i have to change the uid to SA ? (i had to assign one when i downloaded and installed MSDE?
am not very experienced in using DTS and really need your help. I have a dts package that i have scheduled to run every day. Here's what i want the package to do:
1. Check whether a value for a certain column in a certain row of a table in my database is 0 or 1. If it is 1, then 2. Run the dts task (which i have created and is working)
In other words, when the package is started, i want to execute a stored procedure or sql task or whatever, and if that returns 1 then i want to continue, if it returns 0 i want to finish the package without running the dts task. I'm sure there's a simple way to do this, but i could use your help...!
I downloaded SQLExpress and Visual Studio Express to my home computer. I built a simple database, adding data through theSQLexpress admin tool. I built a web page using MS Studio. I connected to the database and used the webpage for a few days. Then I restarted the computer. Now the web page won't open, and MS Studio won't open the MDF file in the App_Data folder. I can still see and work in the database through SQL server Express. The web page and the MSStudio attempt to connect to the mdf file both fail with this message: Cannot open user default database. Login failed.Login failed for user 'KAAAK/Administrator'. So it seems to be trying to connect as the Windows user. When I try to modify the connection to connect through a user/password I created in SQL manager, I get a message that the user is not a trusted SQL user. from web.config: <connectionStrings> <add name="ConnectionString" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|info.mdf;Integrated Security=True;User Instance=True;User ID=Admin;Password=12345" providerName="System.Data.SqlClient"/> </connectionStrings> That was changed from the original string created automatically by MS Studio <connectionStrings> <add name="stocksConnectionString" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|stocks.mdf;Integrated Security=True;User Instance=True;" providerName="System.Data.SqlClient"/> </connectionStrings> I am sure this is some simple problem, but why would the system refuse to access an mdf file it had already been accessing.? Thanks, Michael
Hi all, having trouble with my first sql communication. I've got hosted service with an SQL database i've populated with a row. When it gets to the third line the page crashes with an error. SqlConnection connection = new SqlConnection("Server=mydbserver.com;Database=db198704784;");// +"Integrated Security=True"); SqlCommand cmd = new SqlCommand("SELECT UserName FROM Users",connection); SqlDataReader reader = cmd.ExecuteReader();
is there somewhere i need to put in my username or password? or is this code just wrong
not sure why I am having trouble here but I am using the following WHERE clause expecting to find all rows where any one of the the three keywords are present. ....WHERE Company.L_Keywords LIKE '%metal%' AND Company.L_Keywords LIKE '%tile%' AND Company.L_Keywords LIKE '%ceramic%' however it appears to finding only the rows where all three words are present in the L_Keywords field
This is a very simple question. How would a select satement be formated in the following example. SELECT Grade, Student_ID, First_Name, Last_Name FROM Scores WHERE (This is where I'm stuck and I know this is not the right formatting although I wish it were because it would make my life a little bit easier.) Student_ID = 115485, 115856, 568547, 965864, etc... I may have up to 100 specific student ids to put in this one statement. I know I can use the "WHERE Student_ID = 115485 OR Student_ID = 115856, OR Student_ID = 568547" but that would be alot of waste. Seems like there should be an easier way than using the "OR Student_ID =" for every entry. Can someone explain another way I can do this. Thanks in advance.
Hey, I have a pretty simple question.My query is throwing an error saying "Invalid column name 'subject'."The problem is that subject is a custom column I've made, well just look at the sql:SELECT a.ArticleID, subject=ISNULL((select subject from subjects),'') where subject='some subject'
I have already created package which loads a text file to database using the dts wizard in Enterprise Manager.How do I execute that package using visual basic?Please provide the Code!!!Thanks
Hi there. I am trying to use MDX code to create a measure in ProClarity. Please help!!
A store can be one of a number of ‘Brands’. The MDX segment below gives me the Sales Value of a selected item, but for Store Brand 'Brand1' only. This works fine - but how do I add a brand? That is, how do I see the combined Sales Value for the selected item for 'Brand1' and 'Brand2'?
Hoping someone could me with an ongoing indexing question that I have.
On my site, we have over the past 5 years developed what is emerging as a fairly complicated dbase structure, as features have been added to my site and relations have increased between different database tables, there has been a need to index fields in different ways, and in some instances field indexing has overlapped. For example we may have a table that has 5 fields (field1,field2,field3,field4,field5). A need to index field1 is requried because of a query that reads:
SELECT * From Table1 where field1=XXXXX
Additionally there may be a need to for another query that reads:
SELECT * From Table1 where field2=XXXXX
In this instance an index is placed on field2.... But, for example when there is the following query:
SELECT * From Table1 where field1=XXXXX and field2 = XXXXX
Is it necessary to set a new index on: field1,field2 ???
We have made the choice that yes, in fact there is...but now over time some of our tables have instances of single fields being indexed along with combinations of two single fields that have already been indexed, being indexed together. As tables have grown to over 1,000,000 records and having up to 15 or so indexes, we realize that the number of indexes maybe degrading performance. Also, indexes vary in type, e.g INT,BIGINT,Varchar fields... In the above instance, can we eliminate the multi-indexes and improve performance over all...?
On a second related question:
In the event that two tables are joined on a common field.
e.g. Select * from Table1,Table2 where Table1.field1=Table2.field1
Is it necessary to index both of these fields in tables: Table1 and Table2 ?
Hope someone can help, as we are looking to improve the efficiency of our tables as they continue to grow.
I need help. 160821A network error was encountered while sending results to the front end. Check the SQL Server errorlog for more information. I need help. Our SQL Server is crashing. The Database is still recovering. I can not kill any Process when the Server crashed. I shoot down and restarted the server. Nothing to do. I can not access to the database. It is recovering. How long? I do not know. What can be the reason of the recovering? Nor the event log of Windows NT or the log files of the SQL SERVER can help me.
Here is a part of the log file
23216Arithmetic overflow error for type %s, value = %f.
10915There are more columns in the INSERT statement than values specified in the VALUES clause. The number of values in the VALUES clause must match the number of columns specified in the INSERT statement.
99/01/19 01:14:25.69 spid25 bufwait: timeout, BUF_IO, bp 0x1bba600, pg 0x11b50, stat 0x801000/0x6, obj 0x23494814, bpss 0x124a2a0 99/01/19 01:14:27.15 ods Error : 17824, Severity: 10, State: 0 99/01/19 01:14:27.15 ods Unable to write to ListenOn connection '.pipesqlquery', loginname 'sa', hostname 'myserver'. 99/01/19 01:14:27.15 ods OS Error : 232, The pipe is being closed.
I have many views and views on these views. Is there anyone out there who might have a suggestion as to how I can keep them straight so that I won't lose track of what I made them for? I am starting to not remember why I made some, so I have to go back and try and remember. Any suggestion would be appreciated.
I have a new pc with xp on it,I have been coping data,files,projects,etc from my old pc onto my new over the network.
If I open Query Analyzer my databasese are there and it is all fine,but if I open ODBC I have no databases under System DSN. How do I go about that,I have many databases and tables in it,is there a way I can refresh it or something,it would have to be something simple,right???
Hi, can somebody help me with some verification SQL commands that I need to run on an Oracle database?
In the Oracle table 'FEE', if the 'FEETYPE' column has a value of '3' for a record, then the 'PERCENTAMOUNT' column needs to be not null for that row - can somebody put this into a command for me so I can make lots like it?
another one I have is in the 'FEE' table, if the 'FEETYPE' column has a value of '1', the 'PERIOD' column needs to always have a value of '3' for that row - is there a command that can check the records that do/do not have this information?
I was just looking for opinions on the best place to pick up SQL skills. Community college course? Online courses? Grad school? I've finished undergrad, if that helps anyone have an idea of my current situation.
