I am having 'INSERT STATEMENT CONFLICTED' error since I try to configure sql server 2005 Full Text Search for my database. Before everything was going fine but after doing some changings I mess up my all DB's. None of my database is working. The error only occur while inserting the records using web form. But I can insert directly from Management Studio interface. here is part of my error:
ERROR:
System.Data.SqlClient.SqlException: The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Dept_LegalLaw_Dept_LegalMinistries1". The conflict occurred in database "LegalDB", table "dbo.Dept_LegalMinistries", column 'RegID'.
The statement has been terminated.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlDataReader.ConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
...............AND SO ON
I have been trying to get the ValueR column of the following query through the MDX but instead getting ValueW as output of the MDX
  select   exp(Log(sum(MTMROR)+ 1 ))-1 as ValueW,   exp(sum(Log(MTMROR + 1)))-1 as ValueR   from   Temp_Performance   where Rundate in ('2015-03-01','2015-03-02')
MDX written for the above query is
  With   Member [Measures].[LogValuePre]   as ([Measures].[MTMROR] + 1)   Member [Measures].[LogValuePre1]   as VBA
[Code] ...
[MTMROR] measure has the aggregate function Sum. What i can get from this behavior is MDX is first aggregating the result and default aggregation function is Sum. When i try to see the value with more granular data by having the date dimensions on the row (un-commenting the date dimension) i get the correct log and exp log values. Its showing the correct value as date dimension is most granular level in the fact table. While trying to get the data at less granular level(Fund level), getting the sum function applied automatically. Â Â
If i set AggregateFunction to none in the cube structure, i get null as the output.
How could i apply the log function before the sum function in the [MTMROR] measure?
if have a problem with a SELECT query that works very fine on SQL Server 2000 but not on 2005. I've transfered my db by creating a full backup and restoring the db on 2005. The db is working except this problem.
When i start executing it doesn't finish. I waited a couple of minutes. On 2000 it only takes about 6 seconds to run.
Here it is:
Code Snippet
SELECT * FROM PPS_TERMbesttmpwhere PPS_TermBestTmp.BestNr + CONVERT(varchar(30),CAST(REPLACE(PPS_TermBestTmp.Pos1, ',', '.') AS float),2)
NOT IN (SELECT PPS_TermBest.BestNr + CONVERT(varchar(30), PPS_TermBest.Pos1,2) FROM PPS_TermBest) Any ideas?
I am running the query below but I am getting the following results:-
Store Prod_no Quant_Sold Total Orders Total_Sale 115 M1015 4 4 4000 115 M1015 2 1 2000
For some reason on some of the products there is more than one entry for that day per store. As you can see above there is two entries for the product M1015. I need the results to look like the below:
Store Prod_no Quant_Sold Total Orders Total_Sale 115 M1015 6 5 6000
SELECT
store.branch_no AS store_no,
crea_date,
jobstock.prod_no,
((jobstock.quantity)*COUNT(jobstock.job_id)) AS quantity_sold,
COUNT(jobstock.job_id) AS total_orders,
SUM(jobstock.total*100) AS store_total,
cast (SUM(jobstock.total/1.25)*100 AS INTEGER) AS store_total_before_tax,
((((stock.curr_cost*jobstock.quantity)*100)*COUNT(jobstock.job_id))) AS cost
FROM store, pickup, jobstock, stock WHERE (store.store_id=pickup.store_id) AND (pickup.job_id=jobstock.job_id) AND (stock.prod_no=jobstock.prod_no) AND (stock.store_id=pickup.store_id) AND branch_no>0 and crea_date between '2008-02-25' and '2008-02-28' GROUP BY store.branch_no, jobstock.prod_no, jobstock.quantity, stock.curr_cost, crea_date ORDER BY crea_date
Hi all!I need your help to realize algorithm for stored proc or trigger.tool: MS SQL server 2000, T-SQLTABLE:[unique_id] [mynumber] [week][unique_id] - bigint,primary key, identity auto-increnment[week] - int, 1-53, week number[mynumber] - int, 1 - 7, for every week, daily record one per day, upto 7 per weekso, for every week we have a mynumber from 1 to 7or nothing (if no records for that day),we can insert or delete mynubers in any order, at willEXAMPLE:week 1, mynumber 1,2,3 - so if we insert a new record, mynumber value= 4week 2, mynumber 1,2,3,5,7 - so next mynumber = 4QUESTION:How to use _only_ T-SQL find a missed numbers for particular week whenI'm insert a records?Thanks.Chapai
Hi, I have problem running this query. It will time out for me...My database are small just about 200 members.I have a site for swaping appartments (rental). my query should lookfor matchin a triangle. Like this member A -> B->CA give his appartment to B. B gives his appartment to C and finallyC gives his appartment to ASoo my query looks for matching parameters like rooms, location, sizeandsoo on..I have one table for existing appartments and one for "whantedappartments"and 1 table called "intresse" where members can store "yes" or "no" ifthey are interessted in a appartment.I also have a table called "omrade" to store locations of interest.Hope you can helpe me with some tip soo i can run this query in a fewseconds instead of 20-30 secThanks MSELECTF.medlemsNr as medlemsNr, F.lfId AS lfId, F.ort AS ort, F.gatuadressAS gatuadress, F.gatuNr AS gatuNr, F.rum AS rum,F.storlek ASstorlek,F.hyra AS hyra, count(F.medlemsNr) As hitsFROMmedlem08 A, medlem08 B, medlem08 C, lagenhetF08 D,lagenhetO08 E, lagenhetF08 F, lagenhetO08 G, lagenhetF08 H,lagenhetO08 IWHERED.rum >= I.rumMin AND D.rum <= I.rumMax ANDD.storlek >= I.storlekMin AND D.storlek <= I.storlekMax ANDI.hyraMax = 0" & " OR D.hyra <= I.hyraMax) ANDI.balkong = '" & "" & "' OR D.balkong = I.balkong) AND(I.badkar = '" & "" & "' OR D.badkar = I.badkar) AND(I.bredband = '" & "" & "' OR D.bredband = I.bredband) AND(I.hiss = '" & "" & "' OR D.hiss = I.hiss) AND(I.spis = '" & "" & "' OR D.spis = I.spis) AND(I.brf = '" & "" & "' OR D.brf = I.brf) ANDD.postNr IN (select postNr from ONSKEMAL08 where loId=I.loId) ANDF.medlemsNr Not IN (select medlemsNr2 from INTRESSE08 wheremedlemsNr1=A.medlemsNr) ANDH.rum >= G.rumMin AND H.rum <= G.rumMax ANDH.storlek >= G.storlekMin AND H.storlek <= G.storlekMax AND(G.hyraMax = 0" & " OR H.hyra <= G.hyraMax) AND(G.balkong = '" & "" & "' OR H.balkong = G.balkong) AND(G.badkar = '" & "" & "' OR H.badkar = G.badkar) AND(G.bredband = '" & "" & "' OR H.bredband = G.bredband) AND(G.spis = '" & "" & "' OR H.spis = G.spis) AND(G.brf = '" & "" & "' OR H.brf = G.brf) ANDH.postNr IN (select postNr from ONSKEMAL08 where loId=G.loId) ANDF.rum >= E.rumMin AND F.rum <= E.rumMax ANDF.storlek >= E.storlekMin AND F.storlek <= E.storlekMax AND(E.hyraMax = 0" & " OR F.hyra <= E.hyraMax) AND(E.balkong = '" & "" & "' OR F.balkong = E.balkong) AND(E.badkar = '" & "" & "' OR F.badkar = E.badkar) AND(E.bredband = '" & "" & "' OR F.bredband = E.bredband) AND(E.hiss = '" & "" & "' OR F.hiss = E.hiss) AND(E.spis = '" & "" & "' OR F.spis = E.spis) AND(E.brf = '" & "" & "' OR F.brf = E.brf) ANDF.postNr IN (select postNr from ONSKEMAL08 where loId=E.loId) ANDA.medlemsNr=D.medlemsNr AND A.medlemsNr=E.medlemsNr ANDB.medlemsNr<>A.medlemsNr AND C.medlemsNr<>A.medlemsNr ANDB.medlemsNr<>C.medlemsNr ANDB.sparr<>1 AND C.sparr<>1 ANDA.typ=11 AND A.medlemsNr=" & session("medlemsNr") & " ANDB.medlemsNr=F.medlemsNr AND B.medlemsNr=G.medlemsNr ANDB.typ=11 AND A.triangel=1 AND B.triangel=1 AND C.triangel=1 AND " &_C.medlemsNr=H.medlemsNr AND C.medlemsNr=I.medlemsNr ANDC.typ=11 group by F.lfId, F.medlemsNr,F.ort,F.gatuadress,F.gatuNr,F.rum,F.storlek,F.hyra
I am stuck at a very awkward place. I have created one package which uses an oracle view as its source for data transfer the problem is when i run the package through dtexec it works fine but when i try to schedule it I get the following error
Error: 2008-03-24 13:52:40.22 Code: 0xC0202009 Source: pk_BMR_FEED_oracle Connection manager "Conn_BMR" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
Provider is unable to function until these components are installed.".
I am able to run the package outside the sql job and also connect to the oracle. I have oracle 9i client installed on the server and sql server is 2005.
hi,I was pulling up a report in SQL, and I wanted the records to be ordered by dates descending. However, I found this ordering was only fine enough to order records by dates (not hours or minutes) (within the same date, records were ordered so that the latest entered were at the bottom). I wonder if anyone else has encouted this problem before, or I am doing something wrong.Thanks very much.
I have created the view below, when I highlight the select statement in QA it works fine, but when I try to access the view I get back 0 records! ie: select * from Email_All
It believe its something to do with the last not in section: EmailsAddresses.Email not in ( if I comment it out everything works fine!
does not make any sense...anyone have any clues?
they are all views except the EmailSubscriptions table.
------------------------------------------- SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO
ALTER VIEW [dbo].[Email_All] AS
select * from ( --SHELBY select * from hcf..HM_EmailAddressShelby union all --KMS select * from hcf..HM_EmailAddressKmai union all --EMAIL SUBSCRIPTIONS select * from hcf..HM_EmailAddressWeb where id in (select distinct id from hcf.dbo.EmailSubscriptions where List = 'PeriodicEmailsFromGreg' and status = 1) ) as EmailsAddresses where ltrim(rtrim(isnull(EmailsAddresses.Email,''))) <> '' and EmailsAddresses.Email not in ( select Email from hcf..ShelbyIdEmailSkip --OFF list SHELBY union select Email from hcf..KmaiIdEmailSkip --OFF list KMAI union select Email from hcf..EmailSubscriptions where List = 'PeriodicEmailsFromGreg' and status = 0 --OFF list PERIODIC FROM GREG )
GO
SET ANSI_NULLS OFF GO SET QUOTED_IDENTIFIER OFF GO
I have a script that runs every night to pull some data from Delphi. For some strange reason the past month it has been failing on the inital running of the script but when I close off all of the error boxes and hit the script again it runs just fine.... Please find enclosed the script . Can anyone tell me whe it is wrong... thanks in advance
I created a couple of stored procedures. One of them (let's call it SP1) dumps information into a table and then calls another stored procedure (SP2) to put the info in a temp table in crosstab format. SP1 then displays the info from the temp table.
When I execute SP1 from Query Editor, everything works perfectly. No errors are returned and my data is displayed just as expected.
When I try to execute SP1 from MS Access's pass-through query, I get the following error:
[Microsoft][ODBC SQL Server Driver][SQL Server]Incorrect syntax near ','.(#102)[Microsoft][ODBC SQL Server Driver][SQL Server]Incorrect syntax near 'A'(#102)
I've found that the error occurs when the SP2 is called from within SP1. If it's working fine in Query Editor, shouldn't it work from MS Access? Any insights?
I converted an Access db to SQL Server 2005 Express using FullConvert Enterprise and the conversion went well. I ran a few queries. When I logged in today and run the same exact query (saved it) I get this error:
Msg 208, Level 16, State 1, Line 1
Invalid object name 'tblTXMup'.
I googled the error and someone in another forum said to check ownership, that it would throw that error if another user who was not dbo tried to run a query. I checked and the owner is sa. I logged in as sa and get the same error.
Herre is my connection string:<add name="PageEngine" connectionString="Data Source=MyServerSQLEXPRESS;Initial Catalog=PageEngine;Integrated Security=True;User ID=MyID;Password=MyPwd;" providerName="System.Data.SqlClient"/>When I run the app using WDE (Web Developer Express), Everything works fine. I can access and diplay data from the database with no problems. However, when I try to run it from a browser on the local machine or a remote machine it fails to create a datareader. I am using the Database factory from Enterprise Library. IDataReader dr = pe.DataReaderFromStoredProcedure("pe_GetApplicationInformation", null, "PageEngine");if (dr.Read() != false) (* this is the line it fails on every time){_ApplicationName = dr["ApplicationName"].ToString();_Version = dr["Version"].ToString();_Copyright = dr["Copyright"].ToString();_Owner = dr["Owner"].ToString();}dr.Close(); Here is the "DataReaderFromStoredProcedure" methodpublic IDataReader DataReaderFromStoredProcedure(string spName, peParameters parameters, string connection){Database db;if (connection != null)db = DatabaseFactory.CreateDatabase(connection);elsedb = DatabaseFactory.CreateDatabase();DbCommand dbCommand = db.GetStoredProcCommand(spName);dbCommand.CommandType = CommandType.StoredProcedure;Here is the error message I get:Object reference not set to an instance of an object. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.Source Error: Line 53: IDataReader dr = pe.DataReaderFromStoredProcedure("pe_GetApplicationInformation", null, "PageEngine"); Line 54: Line 55: if (dr.Read() != false) Line 56: { Line 57: _ApplicationName = dr["ApplicationName"].ToString();Source File: c:Public FoldersITWebSite ProjectsScotts_SandboxPageEngineWorkingApp_CodeBusiness LayerApplicationInformation.cs Line: 55 Stack Trace: [NullReferenceException: Object reference not set to an instance of an object.] PageEngine.ApplicationInformation..ctor(Page pg) in c:Public FoldersITWebSite ProjectsScotts_SandboxPageEngineWorkingApp_CodeBusiness LayerApplicationInformation.cs:55 login.GetTitle() in C:Public FoldersITWebSite ProjectsScotts_SandboxPageEngineWorkinglogin.aspx.vb:45 login.Page_Load(Object sender, EventArgs e) in C:Public FoldersITWebSite ProjectsScotts_SandboxPageEngineWorkinglogin.aspx.vb:13 System.Web.UI.Control.OnLoad(EventArgs e) +99 System.Web.UI.Control.LoadRecursive() +47 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1061 Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42 I have tried so many things found on the forums, I don't know what to do anymore![:'(]
I have an application that connects to an externally hosted SQL server. The first time i go to the web page, the application times out. I can then immediately refresh and everything works. After a period of about 20-30 minutes of inactivity, the issue repeats itself. This is very hard to trouble shoot. Anyone know what to do?
Hi, I am using Sql database in my asp.net application. the code runs fine on the machine where i m developing but when I try to run the code on other machine it gives following error-- error is related to access to database.(sql personal server is installed on local machine) I m giving the following connection string--- "Server=localhost;UID=sa;PWD=mypassword;Database=try1" I have reinstalled the sql server using mixed mode authentication and the same sa password but still problem continues.. THE ERROR IT GIVES IS--- Server Error in '/try1' Application.
SQL Server does not exist or access denied. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: SQL Server does not exist or access denied.Source Error:
Line 49: SqlCommand cmdSelect; Line 50: cmdSelect = new SqlCommand("select * FROM Departments", sqlConn); Line 51: sqlConn.Open(); Line 52: return cmdSelect.ExecuteReader(CommandBehavior.CloseConnection); Line 53: }Source File: c:inetpubwwwroot ry1DataAccessCode.cs Line: 51 Stack Trace:
[SqlException: SQL Server does not exist or access denied.] System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction) System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction) System.Data.SqlClient.SqlConnection.Open() try1.DataAccessCode.getDept() in c:inetpubwwwroot ry1DataAccessCode.cs:51 try1.WebForm1.Page_Load(Object sender, EventArgs e) in c:inetpubwwwroot ry1Login.aspx.cs:35 System.Web.UI.Control.OnLoad(EventArgs e) System.Web.UI.Control.LoadRecursive() System.Web.UI.Page.ProcessRequestMain()
Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
On my development machine (XP Pro), when I run several reports in a loop, my connection count (in performance monitor) climb up to around 25 then immediately drop back to 1 when the reports are done being generated. On our production server (WinServer 2003, IIS6) the SQL connection count climbs up to around the same number, then holds there for a few minutes. I know I am closing the connections properly in my code because they clean up fine on the development machine. I'm sure this is a timeout setting or an IIS 6 option I need to tweak. How can I make my production machine remove those connections faster?
I am getting intermittent connectivity issues while connecting to a remote SQL Server 2000 database through the Enterprise Manager. It gives a time-out error
Initially I guessed it must be the network but then I was able to term-serv successfully into the remote server and work without any connectivity issues.
Here's the situation. I've got a DB with several tables. Let's pick out two of those tables from the bunch.. they both have approx 2500 rows in them. I take one and duplicate it (right click, All Tasks->Export Data, copy tables, etc) and it duplicates just fine into another DB.
Now, the second table.. takes FOREVER. Yet it has the same amount of rows in it! And this is a flat table export.. I'm not including dependent objects or anything like that.
Not to mention this is slow, but when I use Red-Gate SQL Data Compare, it gets stuck when it hits this specific table.
I have many jobs on sql 05 and all work but one. This one writes to an Access DB on the same server as SQL. The package works fine. But when executed in the context of the SQL Agent job, it fails.
Jobs that write to a text file work fine. The Access DB has no password required. By the way, that job in sql 2000 worked fine.
I have an SSIS package created from a SQL 2000 DTS using the Migration Wizard. The package imports data from a MySQL database to a SQL 2005 64-bit database running on 64-bit windows server 2003. The package runs fine when executed from SQL Server Management Studio but when I schedule it as a job it fails with:
Executed as user: [the domain admin account]. The package execution failed. The step failed.
I've tried a lot of different ways to make this work including creating a new SSIS package. Again, the package ran fine except when it was scheduled as a job.
I have created a relatively simple SISS package for MS SQL server 2005 SP1, the package runs without issue when started from the development environment, but fails when ran via a SQL Job.
I have other SISS jobs which run without any problems, the difference with this one is that it doesn€™t just access data the the MS SQL server databases, but it also accesses an external MS Access 2003 database (emptys tables then repopulates based on data in MS SQL)
The database is held on a network share, so I would imagine the issue is that the SQL job is ran under a different security context. Originally it was ran under €œSERVERNAMESYSTEM€?, but I created a new credential on the server giving it my own username and password, I then added a proxy to the server which used the new credietial and was given access to all sub systems.
The SQL job step was setup to run under this proxy, but still failed even though the user name on the credentials had access to the MS Access database on the network share & also matched the package CreatureName, allowing the data to be read as EncryptSensitiveWithUserKey was set in the package.
The SISS package was created by using the wizard, no ODBC connection was setup on the server. The job history shows €œExecuted as user: ADMINusername. The package execution failed. The step failed.€? I have also tried this with a protection level of ServerStorage
I keep getting the following error message during the initial merge agent.
· €œThe merge process was unable to deliver the snapshot to the subscriber. If using Web synchronization, the merge process may have been unable to create or write the message file, when troubleshooting, restart the sychronzation with verbose history loggin and specify an output file to write.
· Cannot fine the object €œMSmerge_ctsv_B5ECD41086F24A64B8040A41A75B2DC4€?, Because it does not exists or you do not have permission. (source: MSSQLServer, Error number 15151)
I do see this view in the publication and if I run the following command on the publisher I get€¦
select * from Msmerge_ctsv_B5ECD41086F24A64B8040A41A75B2DC4
I have another publication working on this same server that is working, both are from a copy from a template database. Please advise to what this problem could be and what I can do to resolve this.
Hi, I am executing a SSIS package using dtexec. 64 bit version of dtexec works fine. But when i use 32 bit version of dtexec, it fails. i have local admin rights. Following is error description. Please help.
Microsoft (R) SQL Server Execute Package Utility Version 9.00.1399.06 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 9:24:30 AM Error: 2008-03-18 09:24:32.54 Code: 0xC0202009 Source: IMALCRM Connection manager "IMAL SRC" Description: An OLE DB error has occurred. Error code: 0x800703E6. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" H result: 0x800703E6 Description: "Invalid access to memory location.". End Error Error: 2008-03-18 09:24:32.54 Code: 0xC020801C Source: Load Fund Detail V_FUND_DETAIL [16] Description: The AcquireConnection method call to the connection manager "IMA L SRC" failed with error code 0xC0202009. End Error Error: 2008-03-18 09:24:32.54 Code: 0xC0047017 Source: Load Fund Detail DTS.Pipeline Description: component "V_FUND_DETAIL" (16) failed validation and returned er ror code 0xC020801C. End Error Error: 2008-03-18 09:24:32.54 Code: 0xC004700C Source: Load Fund Detail DTS.Pipeline Description: One or more component failed validation. End Error Error: 2008-03-18 09:24:32.54 Code: 0xC0024107 Source: Load Fund Detail Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 9:24:30 AM Finished: 9:24:32 AM Elapsed: 2.078 seconds
I am having 'INSERT STATEMENT CONFLICTED' error since I try to configure sql server 2005 Full Text Search for my database. Before everything was going fine but after doing some changings I mess up my all DB's. None of my database is working. The error only occur while inserting the records using web form. But I can insert directly from Management Studio interface. here is part of my error:
ERROR: System.Data.SqlClient.SqlException: The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Dept_LegalLaw_Dept_LegalMinistries1". The conflict occurred in database "LegalDB", table "dbo.Dept_LegalMinistries", column 'RegID'. The statement has been terminated. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlDataReader.ConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() ...............AND SO ON
I had a view in which I did something like this isnull(fld,val) as 'alias'
when I assign a value to this in the client (vb 6.0) it works ok in sql2000 but fails in 2005. When I change the query to fld as 'alias' then it works ok in sql 2005 . why ?? I still have sql 2000 (8.0) compatability.
Also some queries which are pretty badly written run on sql 2000 but dont run at all in sql 2005 ???
any clues or answers ?? it is some configuration issue ?
If this post belongs somewhere else I appologize. I have spent several days trying to solve this problem with no luck. My site is online. Hosted at NeikoHosting. I can connect to the database remotely when adding a datacontrol. It tests fine. But when running the page it won't connect. Even if I go in and change the Web.Config connection string to a local Data Source provided to me by Neiko, it still won't work. It just won't connect. Here are the two connection strings in the Web.Config, minus my login info: Only the remote string will pass testing. Neither works on the site. <add name="yourchurchmychurchDBConnectionString" connectionString="Data Source=MSSQL2K-A;Initial Catalog=yourchurchmychurchDB;Persist Security Info=True;User ID=me;Password=pwd" providerName="System.Data.SqlClient" /> <add name="yourchurchmychurchDBConnectionString2" connectionString="Data Source=66.103.238.206;Initial Catalog=yourchurchmychurchDB;Persist Security Info=True;User ID=me;Password=pwd" providerName="System.Data.SqlClient" /> Here is the stack trace, if that helps. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.OleDb.OleDbException: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
My DTS Package work fine if I Execute it manually, but I need to do it automatically just after midnight. I defined my schedule and made sure the job was present in the SQL Server Agent>Jobs, but it fails and the Job History shows the following error:
DTSRun: Loading... DTSRun: Executing... DTSRun OnStart: DTSStep_DTSDataPumpTask_1 DTSRun OnError: DTSStep_DTSDataPumpTask_1, Error = -2147467259 (80004005) Error string: [Microsoft][ODBC Microsoft Access Driver] Cannot start your application. The workgroup information file is missing or opened exclusively by another user. Error source: Microsoft OLE DB Provider for ODBC Drivers Help file: Help context: 0 Error Detail Records: Error: -2147467259 (80004005); Provider Error: 1901 (76D) Error string: [Microsoft][ODBC Microsoft Access Driver] Cannot start your application. The workgroup information file is missing or opened exclusively by another user. Error source: Microsoft OLE DB Provider for ODBC Drivers Help file: Help context: 0 DTSRun OnFinish: DTSStep_DTSDataPumpTask_1 DTSRun: Package execution complete. Process Exit Code 1. The step failed.
I have the following query which works fine when it's executed as a single query. but when i union the result of this query with other queries, it returns a different set of data.
any one know why that might be the case??
select top 100 max(contact._id) "_id", max(old_trans.date) "callback_date", 7 "priority", max(old_trans.date) "recency", count(*) "frequency" --contact._id, contact.callback_date from topcat.class_contact contact inner join topcat.MMTRANS$ old_trans on contact.phone_num = old_trans.phone where contact.phone_num is not null and contact.status = 'New Contact' group by contact._id order by "recency" desc, "frequency" desc
i've included the union query here for completeness of the question
begin declare @current_date datetime set @current_date = GETDATE()
select top 100 _id, callback_date, priority, recency, frequency from ( ( select top 10 _id, callback_date, 10 priority, @current_date recency, 1 frequency --, DATEPART(hour, callback_date) "hour", DATEPART(minute, callback_date) "min" from topcat.class_contact where status ='callback' and (DATEPART(year, callback_date) <= DATEPART(year, @current_date)) and (DATEPART(dayofyear, callback_date) <= DATEPART(dayofyear, @current_date)) -- all call backs within that hour will be returned and (DATEPART(hour, callback_date) <= DATEPART(hour, @current_date)) and (DATEPART(hour, callback_date) <> 0) order by callback_date asc --order by priority desc, DATEPART(hour, callback_date) asc, DATEPART(minute, callback_date) asc, callback_date asc ) union ( select top 10 _id, callback_date, 9 priority, @current_date recency, 1 frequency from topcat.class_contact where status = 'callback' and callback_date is not null and (DATEPART(year, callback_date) <= DATEPART(year, @current_date)) and (DATEPART(dayofyear, callback_date) <= DATEPART(dayofyear, @current_date)) and (DATEPART(hour, callback_date) <= DATEPART(hour, @current_date)) and (DATEPART(hour, callback_date) = 0) order by callback_date asc ) union ( select top 10 _id, callback_date, 8 priority, @current_date recency, 1 frequency from topcat.class_contact where status = 'No Connect' and callback_date is not null and (DATEPART(year, callback_date) <= DATEPART(year, @current_date)) and (DATEPART(dayofyear, callback_date) <= DATEPART(dayofyear, @current_date)) and (DATEPART(hour, callback_date) <= DATEPART(hour, @current_date)) order by callback_date asc ) union ( select top 100 max(contact._id) "_id", max(old_trans.date) "callback_date", 7 "priority", max(old_trans.date) "recency", count(*) "frequency" --contact._id, contact.callback_date from topcat.class_contact contact inner join topcat.MMTRANS$ old_trans on contact.phone_num = old_trans.phone where contact.phone_num is not null and contact.status = 'New Contact' group by contact._id order by "recency" desc, "frequency" desc ) ) contact_queue order by priority desc, recency desc, callback_date asc, frequency desc
I am able to select the average, max, etc of the variable in a simple select statement but when I do the following, it doesn't work. The reason I am doing the following is because I am calculating the average and such over a 5 min interval, then saving the output as one line. That is why I condense average, max, min, and stdev into one variable which I then output. why it won't run when I have it like this but will run when it is like this?
will run:
SELECT AVG(NacTemp), MAX(NacTemp),MIN(NacTemp), STDEV(NacTemp) FROM [DATABASE] WHERE [UTCDeviceTimeStamp] between DATEADD(minute, -5, GETUTCDATE()) and GETUTCDATE()
won't run but I need it to:
DECLARE @now datetime SET @now = GETUTCDATE() --Universal Time DECLARE @timeint int SET @timeint = '5' --time interval in minutes DECLARE @time datetimeSET @time = (SELECT MIN([UTCDeviceTimeStamp]) FROM [DATABASE] WHERE [UTCDeviceTimeStamp] BETWEEN DATEADD(minute, -@timeint,@now) AND @now) -- Timestamp data will be saved as DECLARE @comma varchar(4) SET @comma = ', '
I have a 7 step SSIS package that manipulates some data on a DB2 database. The package executes perfectly in Business Intelligence Development Studio. I save the package to my SSIS store and then point my scheduled task to it and it fails after about 9 seconds everytime. I have an identical job that works with a different DB2 database that works without any problem. The only difference is the database it's pointing to.
The package is executing as the same user who created it, which has sysadmin to both the SSIS store and the SQL instance the package is executing on. When I saved the package I selected "Rely on server storage roles for access control" for the protection level.
This one is driving me crazy, can't figure it out. Any idea's?
