I have a stored procedure that takes 5 parameters. Based on what parameters are passed i want to return a result set to the calling code. Not all of the parameters are required so there will be some combinations on the entered parameters.
Do i need to dynamic build the query with the IF statements to check if the input parameter is NULL or not ?
Thanks
I have a table tblFriends:UserCodeOwner FriendCode5 545 1235 4785 49054 5123 5478 5478 500490 5490 500500 478500 490500 600600 500As you can see I store each relation twice, i've done that because now I can create a clustered index on UserCodeOwner for faster searching.What I want is the following:I want to count how many steps it takes to get from one user to another via their relations and also via which usercode it goes.so: from 5 to 123 is one step.5-123from 5 to 500 is 2 steps via either 478 or 490I want to get a result like this:5-478-500and5-490-500from 5 to 600 is 3 steps:5-478-500-6005-490-500-600Does anyone have a good start for me on how im able to return such results and how I can search through the table most effecively?
View 3 Replies View RelatedHi everybody,
is it possible using SQL Server search for a word on each
table on each field?
Thanks
Fabio
Hello... I'm real new with SQL Server Express and I need to do the following.
I have two tables...
Table 1: Column EmailAddress
Table 2: Column Cust_ID, EmailAddress, FirstName, LastName
I want to search Table 2 EmailAddress, with Table 1 EmailAddress, and if any of the Email Addresses in Table 1 are found in Table 2, delete the rows in Table 2.
Thanks,
Car54
Hi,
I have 4 tables :
Code Block
Create Table #Request ( [requestid] int , [stateno] nvarchar(5) , [cityno] int , Callid int, UniqueNo int);
Create Table #RequestDetail(reqdetailid int, [customername] Varchar(20), [customerage] int, requestid int);
Create Table #Call(Callid int,Calltype int,callDetailid int )
Create Table #CallDetail(callDetailId int,empid int)
Insert into #CallDetail VALUES(12123,1)
Insert into #CallDetail VALUES(53423,1)
Insert into #CallDetail VALUES(6532,1)
Insert into #CallDetail VALUES(82323,1)
Insert into #CallDetail VALUES(124235,1)
Insert Into #Call VALUES(111,1,12123)
Insert Into #Call VALUES(112,1,53423)
Insert Into #Call VALUES(114,1,6532)
Insert Into #Call VALUES(123,2,6532)
Insert Into #Call VALUES(134,1,124235)
Insert Into #request Values('324234','SA023',12,111,0);
Insert Into #request Values('223452','SA023',12,112,0);
Insert Into #request Values('456456','SA024',12,114,0);
Insert Into #request Values('22322362','SA024',44,123,0);
Insert Into #request Values('22654392','SA023',12,134,0);
Insert into #requestdetail values(1, 'Bill',23,'324234')
Insert into #requestdetail values(2, 'Tom',25,'223452')
Insert into #requestdetail values(3, 'Bobby',27,'456456')
Insert into #requestdetail values(4, 'Guck',29,'22322362')
Insert into #requestdetail values(5, 'Bobby',33,'22654392')
1. My stored proc will take the CallDetailID.
2. I have to find out the requests made on this calldetail.
3. After getting the request, i want to take the Customername, cityno of the request/requestdetail and pass it again to #request table to search for any duplicates within the request.
4. If found return the details of the original record :
[A similar requirement was solved earlier, but the structure has changed. This is a seperate requirement with different table strucure. Hence a new post. ]
thanks
Relative SQL newbie here......this is probably easy, but....Lets say I have a table (MainTable) that stores a list of input table names,a primary key (PKey), and a field called "Configured" for each one. Each ofthese input tables also contain a field called "Configured", which is set totrue or false in another process based on an OrderNumber. (So an order'sinputs are stored in several input tables, and the MainTable is a summarytable that shows which input tables have been configured for any givenOrderNumber).What I need to do is open each input table, and look for a record containinga specific OrderNumber and where Configured=true. If a record is found, Ineed to update the Configured field for that table in the MainTable, andthen move on to the next sub-table.The way I'm doing it now is with simple SQL and loops. Here is the basiccode (ASP):*****************************************OrderNumber = "562613" ' the current order that is being processed' reset all configured flagssql = "UPDATE MainTable SET Configured = 0"conn.execute sql, , &H00000080' get list of all tablenamessql = "SELECT InputTableName, PKey FROM MainTable WHERE InputTableName <>'---'"set rsTableNames = conn.execute(sql)while not rsTableNames.eof' test each input table for configured flagsql = "SELECT Configured FROM " & rsTableNames("InputTableName")& _" WHERE Configured = 1 AND OrderNumber = '" & OrderNumber &"'"set rs = conn.execute(sql)If Not rs.EOF Then' update the main tablesql = "UPDATE MainTable SET Configured = 1 WHERE PKey='" &rsTableNames("PrimaryKey") & "'"conn.execute sql, , &H00000080end ifset rs = nothingrsTableNames.movenextwend*****************************************There has to be a faster way.. I think.... maybe something that could bewritten as a stored procedure? I use a similar technique in a couple ofother places and it's a bit of a performance hit, especially as the numberof input tables grows.TIA!Calan
View 6 Replies View RelatedI want to create a function that searches for allowed characters within a table range (that contains the allowed characters) and replace any characters outside this range with a space.
For example -
'Bill123?', 'Jones12.z-'
'John&12/', 'QWERT123&4'
Wanted results – the single quotes are there to show the space for the replaced characters.
'Bill123 '
'Jones12.z '
'John&12 '
'QWERT123 4'
Example SQL data
CREATE TABLE [Common].[AllowedCharacters] (
[Character] [varchar](1) NOT NULL,
[Replacement] [varchar](10) NULL,
[AlwaysInclude] [bit] NOT NULL)
GO
SET ANSI_PADDING OFF
[code]....
The function will wrap around the column names and I know it can be done without a table validate the characters but it must be done this way.
I am trying to query the SharePoint database to get a list of how many times a table name is being used in our SSRS reports.Here is my current query:
DECLARE @TEXTTOSEARCH AS VARCHAR(200)
SET @TEXTTOSEARCH = 'tablenamehere'
;WITH XMLNAMESPACES
(DEFAULT 'http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition',
'http://schemas.microsoft.com/SQLServer/reporting/reportdesigner' AS rd)
[code]...
This works for some tables since the names are unique and I can just do a search for that. However, some of the table names are simple and can also be used as aliases.if there was some way to get the list of table names easier.
I admit I am a novice to queries and stored procedures but understand stored procedures are more secure, so I am choosing to challenge myself with a stored procedure and have not been successful at all.
What I am looking for is a stored procedure which would query the single table named Hospital, which would search from a single textbox the end user would enter the text they are searching for on a Windows VB application but is dependant on a few end user selected items.
1. The end user can select a radio button either "Starts with" or "Contains"
2. The end user can select from 6 checkboxes (Hospitals, Address, City, State, Zip, Type) to limit or expand their search from the columns in the table.
The table has 17columns (CO, PARENTCO, ADDR, POBox, CITY, State, ZIP, TEL, FAX, WEBSITE, HOSP_TYPE, OWNERSHIP, BEDS, CONTACT, TITLE, Email) but I am only allowing the end user to search by the above 6 columns and need to display the above 6 columns plus the phone, fax and website columns.
After the user clicks the search button it displays the results in a listbox and the user will then select the one they want and it displays the information in another set of textboxes.
Hopefully someone can get me pointed in the right direction! Thanks for your help!
I am just a sql beginner. I wonder if it is possible to jump to table B to continue searching while I am still doing search on table A. Thanks
J
Can anyone tell me where I can learn more about DTS.
As I have to export data from a .CSV(comma separated file) into SQL Server.
I have MS SQL 2000 and 2005 Express install on my computer. I would like to know where I can get some good beginner's training and I also need to know how to run sql scripts and import database to both.
This is so easy to do in mysql.
Thanks
I have a SQL server that my web host has provided but I don't know who to set it up! I'm currently have an MS Access database on my web site and I want to change it to MSSQL using the Access upsizing wizards, can anyone talk me through it?
View 2 Replies View Relatedhi there. this is my first post on this forum. im new to SQLServer so please go easy on me. :)
i am trying desperately to call a stored procedure from within another stored procedure. if i post my code below could somebody tell me where i am going wrong. the SP i have written is executing OK but the OUTPUT parameter Id_User is coming back as null, whereas it should be giving my a value there. i have tried changing the line 'EXEC sp_User_I' for 'INSERT INTO @User_Id EXEC sp_User_I' but this wont compile.
CREATE PROCEDURE sp_Account_I]
@Username varchar(16),
@Password varchar(88),
@Surname varchar(32),
@DateBirth datetime,
@Email varchar(64),
@Id_Account int OUTPUT,
@Id_User int OUTPUT
AS
DECLARE @ErrorCode int;
BEGIN
SET NOCOUNT ON;
EXEC sp_User_I
@Username,
@Password,
@FirstName,
@Surname,
@DateBirth,
@Email,
@Id_Country,
@Id_User
...do some other stuff here for the account...
END
Hi all,
I've been banging my head against this issue, and I haven't managed to find a solution. I was hoping that maybe somebody here has done something similar.
I am trying to get the latest available pricing from a Rate table, which is based on the customer ID and the provided date from another table (Table1).
This is what the code looks like, essentially:
select
table1.*
,table2.*
,table3.Rate
from table1
left outer join table2 on table1.Id = table2.Id
left outer join (
Select Top 1 Rate from RateTable
Where RateTable.date < table1.date
order by RateTable.date desc
) as table3 on table3.custId = table1.custId
I understood that table1.date can't be explicitly passed into the nested join within table3, but does anybody know a work around that can achieve the above example (the environment is SQL server 2000 and inside a view not on in a stored proc)?
Thanks in advance for any tips or workaround.
Hi,I am completely new to the BCP utility and fairly new to SQL ServerI am learning from a book and I am trying the following example (the serverI'm learning on is called contractor and a password has not been give to thesa)bcp pubs..authors out authors.txt -C -r -t, -U sa -P -S contractorWhen I run this in Query Analyser i get the error message..Server: Msg 170, Level 15, State 1, Line 1Line 1: Incorrect syntax near '.'.I have tried puuting quotes around the database and the table name asfollows-bcp "pubs..authors" out authors.txt -C -r -t, -U sa -P -S contractorand get the errorServer: Msg 179, Level 15, State 1, Line 1Cannot use the OUTPUT option when passing a constant to a stored procedure.Please can anybody help me to get this first bit working?Thanks in anticipation.
View 2 Replies View RelatedWhat is the best way to go about learning SQL? Where should I start?
View 20 Replies View RelatedHow do i learn SQL server 2000...I'm new to development, and need to get my basics right before i proceed further.
Do give me your feedback / learning tips.
Hi
is there any SQL server book or online meterial for beginners?? i've checked msdn its seems not helpful at beginner level.like issues for installing and first time configuring SQL Server. and installing its clients etc.
hello all i'm new in dot net and as every one beginning in something i have some problems hope u guys can help me my first question is really easy i'm feeling silly to ask such a question i made database in sql server 2005 and i made a table and columns but i cant insert data into the table i dont know how to fill the table with data? my second question is can i convert sql server 2000 database to 2005 if i can how i cando that? that's all for now hope u can really help me thanks in advance
View 4 Replies View RelatedMy company needs a database. My first thought was to do it in Access, because it's available! But I wanted to check that that was smart, what its limitations are, when it's better to move to bigger / more expensive software, etc.
It's probably going to have several hundred thousand records in and will grow by more than a hundred thousand every year. Is there a size limit?
Not that many fields, though - it's not that complicated a database.
Many thanks in advance for any help :beer:
Hi!
I'm trying to make a dictionary.
WordEng(#id,word);
WordIta(#id, word);
tables with words in Italian and English.
Connect1(#id,id1,id2); connecting word form Eng with Ita translation.
Connect2(#id,id1,id2); same for Italian.
Is this correct? 3. normalisation? Will this work?
if i am creating an SP then i only specify output parameters if the SP is to return a single set of values. is that correct? if my SP is returning multiple rows from a SELECT statement then i would not specify any parameters on the SP. can somebody clarify this for me. thanks!
View 2 Replies View RelatedHi guys,
I am new to database programming... i know the answer is somewhere in the past forums and i unfortunately i can't locate it... I have this problem i hope you can help me.
I am trying to insert values into table hosp_wareitem and one of it is the itemid where in i would like to get the item id of an existing medicine... (i hope you can understand me guys) here is my query.. right now im puzzled and i know the answer is already there.. i just cant see it...
set xact_abort on
declare @id as integer
begin transaction
select @id (select medicines_id from
hosp_medicines where medicines_id = medicines_id)
insert into Hosp_WareItem
(ItemID,
Department_ID,
SalesGL_Code,
COSGL_Code,
InventoryGL_Code,
ExpenseGL_Code,
ReadersFeeGL_Code,
CreateBy,
UpdateBy,
DeleteBy,
CreateDate,
UpdateDate,
DeleteDate)
values
(@ID,
'1',
'AAA-111',
'AAA-000',
'AAA-112',
'',
'',
'0',
'',
'',
'1/1/1900 12:00:00 AM',
'1/1/1900 12:00:00 AM',
'')
Update Hosp_Counter set Counter_ID = @ID
where Table_Description = 'wareitem'
commit transaction
it returns an error
(1 row(s) affected)
(24 row(s) affected)
Server: Msg 515, Level 16, State 2, Line 6
Cannot insert the value NULL into column 'ItemID', table 'Medix_Hospital.dbo.Hosp_wareitem'; column does not allow nulls. INSERT fails.
it tries to insert a null value in itemid because it cant get the value of the medicine_id.
any help is much appreciated!
puzzled
joel
Hi all,
This looks like a great place for SQL Server support. I hope you don't mind a few n00b questions.
I'm a sysop whose main experience is with Windows XP and SBS 2003. I'm also reasonably familiar with Access 97/2000, having programmed a few small databases. I've recently acquired a client who is running the premium version of SBS, which includes SQL Server 2005. This means I have to manage this thing. This *huge* thing. So my first question is: Where can I find information to get me started, first from a sysop perspective, and later from a Access programmer perspective. What is your experience?
Then two current issues. One is that for some reason SQL Server 2005 is using about 2 gigabytes of memory out of the box. Is this normal? Second, I can't for the life of me find the backup system. I can see backups being made of the AdventureWorks database (at 3:00), but even after 2 hours of searching I can't change the schedule. I knew how to do this in SQL Server 2000, but this version is very different.
I'd much rather figure these things out on my own, but this product is just too complicated to learn in a few days, and the memory usage issue is critical.
I'd be much obliged for any help you can offer.
Please add me for real-time ask for help.
My MSN: ices_ailee@hotmail.com
My Yahoo: ices_ailee@yahoo.com.sg
Please add my msn or yahoo account, easy for me to enquiry straight forward ...thx yo. I am a junior and beginner with SQL Server.
thx yo!
chia ling
Hi,I'm finishing up a beginning SQL class where we learned on an Oracledatabase and the transition to working on SQL Server is easy. The next moreadvanced course will be in PL/SQL, but I know I will be working on SQLServer in the workplace, so my question is if I should take this course.Will I benefit from the basic philosophies that will be covered, or will itjust make a transition for me more difficult? Will it be partly a waste oftime and money and I'd be better served getting a book and self teachingmyself? I know that in a greater sense learning something isn't necessarilya waste, but I mean from the perspective of my goal of being able to use SqlServer, will this course be useful?thanks.
View 10 Replies View RelatedI just installed SQL Server 2005, Office 2007, and the add-in, but when I check services.msc, I don't see the SQL Server Analysis Services. Does anyone know how I can get this to load? Also, when I run the server configuration utility in the DM add-in folder, do you know what I should put in the server name to get it to run off my hard disk and not a server? local host doesn't seem to work. Thanks in advance!
View 11 Replies View RelatedHi! Everybody,
i am totally new to the environment of MS, (.Net, SQL Server...)
i was working previously with Oracle 9i. I have downloaded MS SQL Server Express 2005, MS SQL Mgmt Studio Express, ..
i want to build a database, and import my data to it. How to do so?
Hi all....
I'm not good t adatabases and never had to install one before, but I have an easy question....
I need to install a big application that needs a database server in the back end to run, I have a box with SQL2005 installed on it and I need to let the server be the database server for this application that will be installed on a seperate box....
How would I be able to point this application to the database server? do I need to install a SQL client on this server and point it to the SQL2005 server in the back?
Do I need to create a "new database" on the SQL sever and give it a name and credentials then point the application to that database? if that is the case, how would I do it?
Thanks.
I have created two reports. One links to the other with a drillthrough. The linking works fine, but no values show up in the fields besides the group titles and column titles. Why is this happening?
The user is given a list of Counties with values. The Counties(in a matrix) are clickable for a drillthrough of Ages and Genders in the Counties. Looks something like this:
Years
Counties Total Crashes Fatalities
Cook 85 98
Manchester 2850 258
Sagamon 987 526
So when a user clicks a county, such as "Cook", this is displayed
Years
Age Gender Total Crashes Fatalities
0-8 Female 25 8
Male 55 15
9-15 Female 850 258
Male 185 35
16-22 Female 87 526
Male 10 35
But I am getting this in :
Years
Age Gender Total Crashes Fatalities
0-8 Female
Male
9-15 Female
Male
16-22 Female
Male
Whats going on? Can anyone make any suggestions? Just to let you know its based off of an Analysis Services Cube and not relational tables.
Hello,
First off, I'm completly new to SQL.
I'm trying to create an insert command that uses a select command as a value.
INSERT INTO Activation.dbo.Selected (PID) SELECT PID FROM ElecDB.dbo.PTT WHERE Vendor = 'guy'
What I get from this is 5 rows updated which is what I wanted.
Although, I would like to insert a UserID from C# code or for now just 1151 for example.
I'm assuming that it would look something like this:
INSERT INTO Activation.dbo.Selected (PID,UserID) SELECT PID FROM ElecDB.dbo.PTT WHERE Vendor = 'guy' , 1151
but I am not even close.
Please help me with this.
Thanks,
Guy
I have a question that I am sure is an easy answer for the pros, but being a beginner I need a bit of help. My problem is I am trying to average multiple columns and return a single output. Here is an example of the data and layout that I am looking at, and what the intended results would need to be.
TradeAmt TradePrice
100 36.75
200 38.75
100 36.80
The desired results would be the average Trade Price (36.7625 in this case). The problem I am running into is taking into account both columns. I know in other programming languages you can create a loop to multiply the TradeAmt by TradePrice, add the value to the next set of TradeAmy x TradePrice, and ultimately average it out. Since I am new to SQL I am not sure of the best way to proceed, any advice would be greatly appreciated.