Best Practice? SQL 2000 And 2005 On Same Server
Aug 28, 2006
(I tried to search for answers before posting, but had difficulty)
I have read in Microsoft forums that you "can" install SQL 2005 as an instance on a SQL 2000 server (not clustered.)
My decade+ of experience tells me it would be a bad idea, I'd expect the next service pack to fail or some other un-expected result. This is for a high availability application where the vendor requires SQL2000, and our custom coders want to use some SQL2005 featuers.
Does anyone have experience with two instances of different versions in a high visibility production system?
Does anyone have some points I could use to argue against this other than me sounding paranoid.
Thanks!
View 2 Replies
ADVERTISEMENT
May 3, 2007
Hi There,
I need to pull data using input from one table in sql server 2005. I have to query against the sql server 2000 database and pull data into sql server 2005. I have a list of ids that I have to pass to a query to get the desired data. What is the best practice for this. Can I use SSIS or do I need to build an app in C#? Can somebody please reply back?
Thanks a lot!!
View 4 Replies
View Related
Jul 26, 2007
Hi,
I have downloaed microsoft's Best Practice Analyser for SQL Server 2000. I would like to recomend this tool in our organisation. Before that i want to confirm that is there any restrictions to use this tool or it is an free ware tool.
View 1 Replies
View Related
Sep 1, 2006
Hi ,all here,
Would please anyone here give me any guidance and advices for best practice of data dictionary in SQL Server 2005?
I have restored a large insurance claims database with up to more than 300 tables, massively, most of them are empty tables, many of them dont have any keys, contrains, indexes, and more difficult, there is no any data dictionary for the database which gets me stuck in the understanding of the data at the moment. Thus I think data dictionary is very important for a database.
Will anyone gives me advices for that? Really need help.
Thank you very much in advance for any help.
With best regards,
Yours sincerely,
View 11 Replies
View Related
Aug 18, 2006
Hi
We would like to install Sql 2005 Enterprise Edition (including database engine, reporting service, integration service and analysis service) as a sepearte instance on a server which already has Sql 2000 with reporting services and analysis services. We do not want to disturb the existing sql 2000 setup.
If we do that then what will happen to my earlier sql 2000 reporting service? Will it be upgraded to sql 2005 reporting service? I heard that reporting services are instance unaware application. Where will be the default reporting service database available?
Please help us.
Regards,
Sankar N
View 1 Replies
View Related
May 19, 2008
Hi, I am trying to edit some data from a SQL2000-datasource in ASP.NET 2.0 and have a problem with a column that has bit-data and is used for selection. SQL2005 works fine when declaring <SelectParameters> <asp:Parameter DefaultValue="TRUE" Name="APL" Type="boolean" /> </SelectParameters>When running this code with SQL2000, there are no error-msgs, but after editing a record the "APL"-column looses its value of 1 and is set to 0. Looks like an issue with type-conversion, we've hit incompatibilities between SQL200 and 2005 with bit/boolean several times before. So, how is this done correctly with SQL2000? (I've tried setting the Type to "int16" -> err. Also setting Defval="1" gave an err) ThanksMichael
View 2 Replies
View Related
Jun 15, 2006
I have several SQL 2000 servers I need to setup transactional (non updatable) replication with. The structure is:
SQL Server 2000 as Publisher/Distributor
SQL Server 2005 Standard as Subscriber
The connection is via the Internet with snapshots using FTP.
I setup the first set (2 databases at location A). They work wonderfully. I created the publication and then subscribed using MGMT Studio for 2K5.
II am setting up the same scenario for location B. Here is my problem:
In MGMT Studio I connect to the publisher (SANDRA). I right-click a publication and choose New Subscriptions..., the publication is already selected. I click next - Run each agent at its Subscriber is selected and the only option (this is desired), I click Next
HERE IS THE PROBLEM:
On the Subscriber's screen there are no Subscribers listed. When setting up location A the subscribing server was listed and I could choose a database. The Next button is greyed out and there is no way to create/add one.
I tried setting up the subscription by right-clicking the subcribing server's Replication folder in MGMT Studio but I get the same result (except that I have to authenticate with the publishing server which works fine).
WHAT'S DIFFERENT:
Location A is SQL Server Standard (SP3) running on SBS2K3. It is obviously on a domain and so SQL Server and the SQL Agent are running under domain accounts. Location B is a Windows XP SP2 machine running SQL Server Personal Edition (it actually says Development Edition in the properties window).
The databases are the same strucutre, different data. At location A the firewall is set to allow 1433->*any* and *any*->1433 where *any* is 1024 or higher. On the XP machine the firewall is set to allow port 1433. I don't think this is the issue because I've turned the firewall off on the XP machine and I get the same result.
ANY IDEAS?
View 5 Replies
View Related
Aug 10, 2007
Hello Everyone,
I'm trying to connect to Desktop SQL Server 2000 from Windows mobile PC Emulator (VS 2005). I need a direct connection using connection string to SQL Server 2000 through local wireless network without IIS.
Bellow is the code that I use. After executing this code I get an error on line Conn.Open(). Error says SQL Server does not exist or access denied.
SQL is un and running, and I can log in using SA username from the desktop. Even if I chance IP for another SQL server in my connection string I still get the same error. There is no firewall of any kind running.
Dim connectionSTR As String = "Persist Security Info=False;Integrated Security=False;Server=192.168.0.202,1433;initial catalog=MyDB;user id=sa;password=;"
Dim Conn As SqlConnection
Conn = New SqlConnection(connectionSTR)
Conn.Open()
If Conn.State = ConnectionState.Open Then
MessageBox.Show("Open")
End If
About my environment: SQL Server 2000 is running on Desktop PC with Windows XP SP2. Application which I need to connect to SQL Server is in Visual Studio 2005. I execute the application in Windows Mobile PC Emulator and try to connect to SQL Server from emulator.
Your advice and help is very appreciated
Thank you
Ika
View 3 Replies
View Related
Aug 9, 2006
Hi Everyone
We are building a new site using ASP and SQL as the backend.
Any idea where I can find some information about best practices to coonect the 2.
I was thinking about IIS on a DMZ with port 80 only open and the SQL inside the internal network and open port 1443 between them.
Any ideas will be welcomed.
Thank you
Oren Levy
View 2 Replies
View Related
Feb 10, 2004
Hi everyone,
Is there a version of MS SQL Server 2000 upon which one can practice writing code? I want to do so on my personal PC at home. Thanks.
ddave
View 6 Replies
View Related
Feb 15, 2008
An IT dept. I have been consulting with has started to reboot SQL server every night. They are saying that this is the best practices. I would like to know if anyone has any other ideas on this subject. What is the best practices for how often a SQL server should be rebooted, daily, weekly, monthly ... ?
Thanks
View 9 Replies
View Related
Aug 8, 2007
Hello,
I have been working on SQL Server Capacity Planning for a few weeks now and have gathered a lot of materials, but non of thes materials contain recommended best practices on SQL Server capacity planning and also they do not contain operational guidelines.
I would be glad if anyone can recommend a website or book that contain information on SQL Server Capacity Planning Best Practices.
Thanks,
Jide
View 3 Replies
View Related
Aug 13, 2007
What is the usual way to develop ASP.NET websites locally using a database and then migrate everything to the real webserver?
Here's what I'm doing now -- tell me what I should be doing instead (I'm a newbie developer).
I'm using Visual Studio 2005 Standard with a SQL Server 2005 database, to develop a small C# ASP.NET website. I'm the only developer.
View 3 Replies
View Related
Jul 23, 2005
Does anyone know much about this tool? Also, if anyone can point me toa TSQL coding standard, please let me know.-- Dave
View 2 Replies
View Related
Feb 13, 2008
When I proposed start to use SQL Server 2005 for new VS 2005 web sites, one of my co-workers responded that
we will update the old SQL Server 2000 databases to SQL Server 2005 when we are ready to use 2005 SQL Server.
Questions:
1. Any expected problems to upgrade old 2000 databases to new 2005 SQL Server?
2. I have installed both 2005/Management Studio Express and 2000/Enterprise Manager in my PC. Any expected
problems when running both 2000 and 2005 SQL Server at the same database server?
3. What is the best configuration for running SQL Server 2005 when we have old 2000 databases? Upgade or not upgrade?
TIA,
Jeffrey
View 4 Replies
View Related
Sep 20, 2006
When I try to migrate a database on a SQL Server 2000 server to a SQL Server 2005 server with the Copy Database Wizard of the SQL Server Management Studio, I'm confronted with the following problem;
Performing operation...
- Add log for package (Success)
- Add task for transferring database objects (Success)
- Create package (Success)
- Start SQL Server Agent Job (Success)
- Execute SQL Server Agent Job (Error)
Messages
* The job failed. Check the event log on the destination server for details. (Copy Database Wizard)
When I take a look at 'Event viewer' on the SQL 2005 server, the following error is displayed;
InnerException-->An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005,
this failure may be caused by the fact
that under the default settings SQL Server does not allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I already enabled the MSSQLSERVER network configuration protocols (TCP/IP and Named Pipes ).
How do I solve this problem?
View 9 Replies
View Related
Jul 27, 2007
With regards to time zones, daylight savings, and web users, is there a best practice for storing date & time information in a database?
For example, my databases are hosted in Time Zone A, but the web users are in Time Zone B. Then, when I create a rss feed (which is displayed in GMT), I add a third time zone into the mix for the same data. To date (no pun intended), I have been entering the date/time data in the time zone of the database server (Time Zone A), and then converting it using an application setting in the web.config file (i.e. TimeZoneBOffset = -1, GMTOffSet = -5). In other words, each time I display a date I calculate what it should be using the time-zone offset in the web.config. This also enables me to account for changes in day light savings, etc.
My concerns are three fold: 1. What if I move the database to another server and the time zone changes? 2. Right now the users are in only 1 time zone. If I expand it to several then the offset will have to be by users, which is do-able, but something I haven't had experience with in the past. 3. It is likely more efficient to calculate the time zone once on input into the DB, rather than in each use like I'm doing now. What time zone baseline for insert into the db should I use?
Thanks in advance for your help!
PS My application is primarily looking at 'smalldatetime' data - down to the 'minute' level.
View 6 Replies
View Related
Nov 30, 2005
Hi all,
This is a bit of a general question regarding SQL Server link tables that i hope someone can find the time to answer.
I am looking for the best practice. If I have 3 tables
1) tblCompetition
2) tblTeams
3) tblTeamsInCompetition (this is the link table)
I know the link table should have a related CompetitionID and TeamID,
but should the link table also have a primary key that is an identity
autoincrement by 1 just as you would with the other two tables. In
Access I have never done this, however in SQL Server I have read that
you should do this (but now I can't find the documentation again which
prompts me to ask the question here).
Thanks for taking the time to answer this question.
View 7 Replies
View Related
Apr 20, 2007
My server is a dual AMD x64 2.19 GHz with 8 GB RAM running under Windows Server 2003 Enterprise Edition with service pack 1 installed. We have SQL 2000 32-bit Enterprise installed in the default instance. AWE is enabled using Dynamically configured SQL Server memory with 6215 MB minimum memory and 6656 maximum memory settings.
I have now installed, side-by-side, SQL Server 2005 Enterprise Edition in a separate named instance. Everything is running fine but I believe SQL Server2005 could run faster and need to ensure I am giving it plenty of resources. I realize AWE is not needed with SQL Server 2005 and I have seen suggestions to grant the SQL Server account the 'lock pages in memory' rights. This box only runs the SQL 2000 and SQL 2005 server databases and I would like to ensure, if possible, that each is splitting the available memory equally, at least until we can retire SQL Server 2000 next year. Any suggestions?
View 8 Replies
View Related
May 30, 2008
We have a new database server for SQL Server 2005. To use our old VS 2005 websites, which were connected toanother database server with SQL Server 2000, what should I do? Just change the server name of the connection stringin the Source code and/or Web.config? My preliminary testing seemed to be not effective.TIA,Jeffrey
View 2 Replies
View Related
May 31, 2006
Hi Guys,
I have had SQL Server Express and Sql Server Management Studio Express installed on my machine for some time and recently tried to install a trial of SQL Server 2005 as well. (Yes, I'm migrating from Visual Studio Express to Visual Studio Professional, just as in tended!)
Everything went fine except that nothing seemed to be installed. I searched in all the obvious places - both on the Start/Programs menu and on the hard-drive: nothing.
A check under Add/Remove Programs showed that Sql Server 2005 Express was installed, but called SQL Server 2005.
So after a number of retries in which the install program kept saying that there was nothing to install, I selected every option under Advanced in the intall process. This resulted in stuff being installed and I now have SQL Server 2005 running on my machine, but no SQL Server Manager icon.
My questions are:
Where can I find the SQL Server Manager executeable?
Has anyone installed SQL Server Express, SQL Server Mangement Studio Express, SQL Server 2005 and SQL Server Management Studio on a single machine successfully? If so, what order did you install them in? (I'm planning on uninstalling everything SXQL Server related and starting again.)
Thanks very much for your help.
Regards
Gary
View 5 Replies
View Related
May 4, 2007
Hi
I have created a linked server from SQL Server 2005 (SP 1) to SQL Service 2000 (SP 4) with a sql server login that is available on both servers but with different passwords and permissions.
I am getting the following error while accessing the linked server in management studio based on the scenario given below ;
------ Error Message Starts
OLE DB provider "SQLNCLI" for linked server "(SQL Server 2000 instance name)" returned message "Communication link failure".
Msg 10054, Level 16, State 1, Line 0
TCP Provider: An existing connection was forcibly closed by the remote host.
Msg 18456, Level 14, State 1, Line 0
Login failed for user 'abc'.
------ Error Message Ends
Consider login name is abc.
Now this login abc has sysadmin rights on sql server 2005.
The same login abc has only db_datareader rights on sql server 2000 on just one database and is not associated with any fixed server role.
I have configured the linked server using the following options;
1. I have tried impersonating login from SQL Server 2005 to SQL Server 2000 .
2. I have also tried specifying remote login / password option.
Anyone having any idea, would be of great help.
Regards,
Salman Shehbaz.
View 3 Replies
View Related
Apr 18, 2007
Can I connect from a SQL Server 2005 database to a SQL Server 2000 database, without establishing a linked server connection.
I need to fire a SELECT query on a SQL Server 2000 database, but don't want to add it as a linked server. Is there any way I can do this or its not possible??
View 1 Replies
View Related
Aug 24, 2006
We have a project already developed iusing VS 2003 Enterprise architect edition using sql server 2000(have lots of table and stored procs etc.)
Now planning to switch to Sql server 2005 are there any issues associated with the switch.
I mean front end programming wise asp.net and vb.net front end codes do they work straight away or need to make any changes to all the front end codes, we are using datasets, data readers calling stored procs and also using lot of hash tables and XML object to make bulk loads to sql server via sqlxml3.0 sp3.
Please help thank you very much for the information.
View 1 Replies
View Related
Nov 20, 2006
Hi all,I just asked some people to help me out and phone microsoft with thefollowing information, kindly they refused unless we setup a supportcontract with them first, for pre-sales information. (That really doesnot sound like good business sense to me - anyway here is our problem,if anyone could help thanks)."To tell and ask microsoft:We will be setting up a microsoft sql server 2000 instance running on awindows 2003 server.1) We need to check this can run alongside a microsoft 2003 sql server(either workgroup or standard edition), on the same machine. Are thereany .dll clashes if we do this? If there are can we run SQL Server2000, in a virtual machine running windows 2000 professional. (I have alicenced copy we can use for this).2) If we run one instance of 2000, and one of 2003 of the sql servers,can one use the processor licence model, and one use the CAL licencemodel."Thanks for any help, and any idea why they actually force you to usenews groups for pre-sales information?David
View 4 Replies
View Related
Jan 8, 2008
Hi,
I have an interesting situation here. I have a SQL Server 2000 database which is attached to SQL Server 2005. The database (SQL 2000) however only has service pack 3 applied. I need to apply SP4 before I can move forward with SQL 2000->2005 upgrade. The question: can I somehow apply this support package with my current configuration or should I install full SQL 2000 front-end anew (which I don't have at the moment)? Whenever I try to run SQL 2000 SP4 it complains "SQL Server 2000 is not installed on this machine."
The server I try to install the update is Windows Server 2003 R2 Standard Edition x64. SQL Server 2000 database itself is x86 (obviously).
Thanks.
View 4 Replies
View Related
Aug 30, 2006
I'm trying to link SQL Server 2000 sp3 to SQL 2005 64 bit. I keep getting Error 17 sql server does not exist or access denined. I tried adding remote user mapping and chaning the linked server properties to "Be made using this security context" without any success.
Any help is appreciated.
View 4 Replies
View Related
Mar 12, 2007
I don't know why my application on the internet try to access the SQL Server 2005, when the host still having the 2000 edition. I put the following connection string:
Data Source=##DBSERVER##;Initial Catalog=##DBNAME##;User ID=##DBUSER##;Password=##DBPASSWORD##;
Isn’t everything fine with that? I created the table by host but dosen’t work. I’m wondering if can I conect straight with Data Base, without register in the server, like with mdb?
This is the error that I’m getting.
When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
View 1 Replies
View Related
Jun 23, 2007
I have a database called 'DB1' in SQL Server 2000. I want to create the same database in SQL Server 2005 Express including the original data in tables.
How would I do that? I cannot find any option to do this upgrade in SQL Server Management Studio.
View 4 Replies
View Related
Dec 27, 2007
Hi All
I have Computer is setuped SQL Server 2000 and SQL server 2005 when I restore SQL Server 2005 it's OK but when it's not OK when I restore in SQL Server 2000. The Error as follows:
Please help me to solve this problem. Thanks
View 1 Replies
View Related
Feb 13, 2006
I'm working towards MCAD and as elective I want to do the SQL Server course. The exam is on SQL Server 2000. I was just wondering whether the online course that Microsoft currently have a available for free at https://www.microsoftelearning.com/sqlserver2005/default.aspx would be useful and applicable to SQL Server 2000, or whether it is sufficiently different product to make it confusing to use this as a learning resource.
Also if anyone can point me toward any webcasts for SQL Server that would be great. I listened to Fritz Onion's 15 part series when I studied for my ASP.NET exam and would like to do something similar for SQL Server 2000 if any are available.
View 3 Replies
View Related
Jun 22, 2007
Hi Friends,I have installed SQL server 2005 Express Edition and SQL Server managementI have a SQL server 2000 db backup file. I try create a new database in my SQL server 2005 express Edition and try restore that backup file from device, it only searching for file with *.bak and *.tm extension! I tried generate backup file with .bak extension and tried restore into SQl server 2005 express edition but still it is not allowing to do so! I also tried copy my database's data file and log file and paste it under SQL server 2005 express edition Data folder and still not able to read the tables.Is that any ways to do restoring for this SQL server 2000 backup file into SQL server 2005 express edition! Anybody can help me on this please...:eek:
View 2 Replies
View Related
Jan 12, 2006
We have experienced an issue with back backup / restore of a database originating from SQL Server 2000 to SQL Server 2003.
We have the following setup:
SQL Server 2000
- DatabaseA
- asdfUser (SQL User)
- asdfUser is (dbowner) of DatabaseA
- DatabaseB
- asdfUser (SQL User)
- asdfUser is (dbowner) of DatabaseB
SQL Server 2005 Standard
-asdfUser is NOT Setup as a user yet.
-We restore DatabaseA and DatabaseB to the SQL Server 2005 Standard. The databases are restored with the security permissions of asdfUser being the DB Owner of DatabaseA and DatabaseB.
-We create a new SQL user named asdfUser on the SQL Server 2005 box. We then try to add the UserMapping of DBOWNER for the DatabaseA and DatabaseB. We receive an error message stating that the asdfUser already have permissions to the databases. We proceed with the user creation without those permissions.
-We proceed to the login properties of the asdfuser and view their UserMappings. The asdfUser does not have access to DatabaseA or DatabaseB. We then add the UserMapping of DBOWNER to both DatabaseA and DatabaseB. We Try to select OK and we receive an error message that states that the user already has those permissions.
-When we query the UserID's of the asdfUser that is in the database and the UserID of the asdfUser that is created, they are two different values.
I assume this is a bug... any word on a fix?
View 1 Replies
View Related
