Best Practice: Use Values In WHERE Clause Or Create And Join Temp Table ?
Dec 28, 2006
Hi,
I am using a SQL back end to dynamically populate an asp.net report/page.
As the data I'm interrogating is created from a tree control, I'm having to use a recursive function to retrieve the data into a series of ID values. This all happens at the moment in a DataTable manipulated with c# code. So my ID values end up in this datatable.
My problem is that I am then performing a crosstab query in SQL Server 2000 and these ID are required as part of that query.
Should I create a temp table and join this into the query or should i feed in a series of ID values into a where clause?
Any help gratefully appreciated.
Thanks.
John
View 2 Replies
ADVERTISEMENT
Jul 20, 2005
I have a set of udf's dealing that return a one column table of valuesparsed from a comma delimeted string.For example:CREATE FUNCTION [dbo].[udf_filter_patient](@patient_list varchar(2000))RETURNS @patient TABLE(patient_id int)ASBEGINinsert into @patientselect patient_id from patient-- parse @patient_list stuff excludedRETURNENDI have come up with the following two schemes to use these udfs. Theseexamples are obviously simplified, and I have a handful of stored proceduresthat will use between 10 or more of these filters. If the two areequivalent, I prefer Method 2 because it makes for much neater SQL whenusing many filter criteria.So my question is, will one noticebly outperform the other? Or is there abetter way in which to filter on a list of criteria?Method 1 :CREATE PROC sp__filter_open_bills@patient_list varchar(2000)ASCREATE TABLE #patient(patient_id int)INSERT INTO #patientSELECTpatient_idFROMdbo.udf_filter_patient( @patient_list )SELECT*FROMopen_billsINNER JOIN #patient on #patient.patient_id = open_bills.patient_idGOMethod 2 :CREATE PROC sp__filter_open_bills@patient_list varchar(2000)ASSELECT*FROMopen_billsWHEREopen_bills.patient_id IN ( SELECT patient_id FROMdbo.udf_filter_patient( @patient_list ) )GOThanks for the help!Chris G
View 4 Replies
View Related
Apr 9, 2014
Below are my temp tables
--DROP TABLE #Base_Resource, #Resource, #Resource_Trans;
SELECT data.*
INTO #Base_Resource
FROM (
SELECT '11A','Samsung' UNION ALL
[Code] ....
I want to loop through the data from #Base_Resource and do the follwing logic.
1. get the Resourcekey from #Base_Resource and insert into #Resource table
2. Get the SCOPE_IDENTITY(),value and insert into to
#Resource_Trans table's column(StringId,value)
I am able to do this using while loop. Is there any way to avoid the while loop to make this work?
View 2 Replies
View Related
May 27, 2008
I am using web developer 2008, while connecting to I wanted to fetch data from Lotus notes database file, for this i used notesql connector, while connectiong to notes database i am fetting error
ERROR [42000] [Lotus][ODBC Lotus Notes]Table reference has to be a table name or an outer join escape clause in a FROM clause
I have already checked that database & table name are correct, please help me out
How i can fetch the lotus notes data in my asp.net pages.
View 1 Replies
View Related
May 27, 2008
I am using web developer 2008, while connecting to I wanted to fetch data from Lotus notes database file, for this i used notesql connector, while connectiong to notes database i am fetting error
ERROR [42000] [Lotus][ODBC Lotus Notes]Table reference has to be a table name or an outer join escape clause in a FROM clause
I have already checked that database & table name are correct, please help me out
How i can fetch the lotus notes data in my asp.net pages.
View 1 Replies
View Related
Jul 19, 2006
Hi all
My query has some inner joins to some tables. And problem is when any ON clause get null as value, the correspondent record is not displayed.
SELECTTableA.A, TableB.AFROM TableAINNER JOIN TableB ON TableA.A = TableB.A
What I did try:
SELECTTableA.A, TableB.AFROM TableAINNER JOIN TableB ON TableA.A = TableB.A OR TableA.A IS NULL
(but It generates redundant values from TableB)
I need to show all values even that value from Tablea is null
Thank a lot for any help
View 1 Replies
View Related
May 6, 2014
I have 2 identical tables one contains current settings, the other contains all historical settings.I could create a union view to display the current values from table A and all historical values from table B, butthat would also require a Variable to hold the tblid for both select statements.
Q. Can this be done with one joined or conditional select statement?
DECLARE @tblid int = 501
SELECT 1,2,3,4,'CurrentSetting'
FROM TableA ta
WHERE tblid = @tblid
UNION
SELECT 1,2,3,4,'PreviosSetting'
FROM Tableb tb
WHERE tblid = @tblid
View 9 Replies
View Related
Jun 6, 2005
Hello,
I am receiving the following error:
Column name or number of supplied values does not match table definition
I am trying to insert values into a temp table, using values from the table I copied the structure from, like this:
SELECT TOP 1 * INTO #tbl_User_Temp FROM tbl_User
TRUNCATE TABLE #tbl_User_Temp
INSERT INTO #tbl_User_Temp EXECUTE UserPersist_GetUserByCriteria @Gender = 'Male', @Culture = 'en-GB'
The SP UserPersist_GetByCriteria does a
"SELECT * FROM tbl_User WHERE gender = @Gender AND culture = @Culture",
so why am I receiving this error when both tables have the same
structure?
The error is being reported as coming from UserPersist_GetByCriteria on the "SELECT * FROM tbl_User" line.
Thanks,
Greg.
View 2 Replies
View Related
May 23, 2008
Hello,
I have created a temporary table that has an identity and default values that it creates and sets but also it needs to get values from a sub query for the final insert into the temp table. I have my create temp table, and my insert into set up but my select is confusing me since some of the values I need to select are determined as they are entered into the temp table. Is there a way to alias them or not put them in the select? If I leave them out it says there are more values in the insert than in the select.
Create Table #TempLabTestConfigImport
(temp_id int identity(1,1),system_id int default 2250, labtestkey nvarchar(10) null,
valuecode nvarchar(10)null, value_description nvarchar(50) null,
value_code_system varchar(10) default 'L',value_type char(2) null,
units nvarchar(5) null,sequence_number int null, table_name nvarchar(50) null,
field_name nvarchar(50) null,created_by int default 57,create_timestamp datetime default getdate(),
modified_by int default 57,modify_timestamp datetime default getdate(),
row_timestamp datetime default getdate())
/*CTE and sub query that combines the data for import and inserts it into temp table*/
With labtestcheck (labtestcode)
as
(
select a.labtestcode
from EMR_temp_labtest_configupdate a
Where Not Exists (Select * From lab_test_add_conf b where b.labtest_key = a.labtestcode)
)
Insert Into #TempLabTestConfigImport
(temp_id,system_id,labtestkey,valuecode,value_description,value_code_system,
value_type,units,sequence_number,table_name,field_name,created_by,create_timestamp,modified_by,
modify_timestamp, row_timestamp)
SELECT temp_id,system_id,
l.labtestcode,t.valuecode,t.valuedesc,value_code_system,
t.valuetype,t.units,t.SequenceCount,t.tablename,t.fieldname, created_by,
create_timestamp,modified_by,modify_timestamp, row_timestamp
FROM labtestcheck l
INNER JOIN
(
select t.labtestcode,b.valuecode,b.valuedesc,b.valuetype,b.units,
row_number() over (partition by t.labtestcode order by b.valuecode) as SequenceCount,
b.tablename,b.fieldname
from EMR_temp_labtest_configupdate a
inner join emr_zseg_code_descriptions b on a.zsegcode = b.zsegcode
inner join labtestcheck t on t.labtestcode = a.labtestcode)t
ON t.labtestcode=l.labtestcode
View 2 Replies
View Related
Feb 11, 2015
i am inserting something into the temp table even without creating it before. But this does not give any compilation error. Only when I want to execute the stored procedure I get the error message that there is an invalid temp table. Should this not result in a compilation error rather during the execution time.?
--create the procedure and insert into the temp table without creating it.
--no compilation error.
CREATE PROC testTemp
AS
BEGIN
INSERT INTO #tmp(dt)
SELECT GETDATE()
END
only on calling the proc does this give an execution error
View 3 Replies
View Related
Jul 25, 2004
Hello everyone :)
I have a temp table that looks like this (as a result of two seperate inserts into it):
RowNumber starttime endtime
----------- ----------- -----------
1 l 0 l NULL
2 l 360 l NULL
3 l 720 l NULL
4 l 1020 l NULL
5 l 1380 l NULL
6 l NULL l 180
7 l NULL l 540
8 l NULL l 900
9 l NULL l 1200
10 l NULL l 1440
I need some help getting it to look like this (with No NULL cell values)!
RowNumber starttime endtime
----------- ----------- -----------
1 l 0 l 180
2 l 360 l 540
3 l 720 l 900
4 l 1020 l 1200
5 l 1380 l 1440
PLEASE help I have been looking at this for the past 3 days and can't figure it out! :o
View 6 Replies
View Related
Jul 20, 2005
This one is interesting...Is there any way to pass a joined parameter into a UDF as I'm attempting below?I have a temp table that I'm trying to create:create table #t3(bmkPerson int primary key,LangCode nchar(5),SName varchar(1000))insert into #t3select t2.bmkPerson, t2.LangCode,select SName from SName_trans_udf(t2.LangCode)from #t2 t2Thanks in advance,RenaeJoin Bytes!
View 1 Replies
View Related
Jul 20, 2005
Hi all!I have a problem with a temp table.I start creating my table:bdsqlado.execute ("CREATE TABLE #MyTable ...")There is no error. The sql string has been tested and when it'sexecuted in the sql query analyzer it really creates the table.After creating the table, I execute an insert statement:bdsqlado.execute ("INSERT INTO #MyTable VALUES(...) "It returns an error like this: "Invalid Object Name #MyTable"I don't understand what's wrong. If I execute both sql sentences inthe SQL Query Analyzer it works perfectly.I use the same connection to execute both statements and I don't closeit before the INSERT is executed.I think it may be something related to dynamic properties of theconnection, but I'm not sure. It's just an idea.Please I need help.Thanks a lot,
View 1 Replies
View Related
Jul 10, 2015
DECLARE @Query varchar(8000)
Create Table
#tempCountRichard (Status varchar(50), Number Varchar(1000)
Set @Query = 'Insert Into #tempCountRichard
Select Count(Status),
[code]...
With the following SQL. When I select from the temp table I return the right count but my second column doesn't return anything.
Count Status
1010 2000
1111 2222
When I run the query that is being inserted into the the temp table I return the correct results
Count Status
1010 Pass
2000 Pass with Obs
1111 Fail
2222 None
how to select the data from the temp table exactly the same way it was inserted. As I need to select the exact same data from the insert.
View 23 Replies
View Related
Mar 3, 2003
Can someone send me an example of creating a variable to use instead of a temp table? I cannot find an example on books on line, but know it is possible in SQL2000.
Thanks,
Dianne
View 2 Replies
View Related
Jan 23, 2006
I need to create a dynamic temporary table in a SP. Basically, I am using the temp table to mimic a crosstab query result. So, in my SP, I have this:--------------------------------------------------------------------------------------- Get all SubquestionIDs for this concept-------------------------------------------------------------------------------------DECLARE curStudySubquestions CURSOR LOCAL STATIC READ_ONLY FOR SELECT QGDM.SubquestionID, QGDM.ShortName, QGDM.PosRespValuesFROM RotationMaster AS RM INNER JOIN RotationDetailMaster AS RDM ON RM.Rotation = RDM.Rotation INNER JOIN QuestionGroupMaster AS QGM ON RDM.QuestionGroupNumber = QGM.QuestionGroupNumber INNER JOIN QuestionGroupDetailMaster AS QGDM ON QGM.QuestionGroupNumber = QGDM.QuestionGroupNumberWHERE RM.Study = @StudyGROUP BY QGDM.SubquestionID, QGDM.ShortName, QGDM.PosRespValuesHAVING QGDM.SubquestionID <> 0--------------------------------------------------------------------------------------- Dynamically create a Temp Table to store the data, simulating a pivot table-------------------------------------------------------------------------------------SET @Count = 2SET @SQL = 'CREATE TABLE #AllSubquestions (Col1 VARCHAR(100)'OPEN curStudySubquestionsFETCH NEXT FROM curStudySubquestions INTO @SubquestionID, @ShortName, @PosRespValuesWHILE @@FETCH_STATUS = 0BEGIN SET @SQL = @SQL + ', Col' + CAST(@Count AS VARCHAR(5)) + ' VARCHAR(10)' SET @Count = @Count + 1 FETCH NEXT FROM curStudySubquestions INTO @SubquestionID, @ShortName, @PosRespValues ENDSET @SQL = @SQL + ', ShowOrder SMALLINT)'CLOSE curStudySubquestionsPRINT 'Create Table SQL:'PRINT @SQLEXEC (@SQL)SET @ErrNum = @@ERROR IF (@ErrNum <> 0) BEGIN PRINT 'ERROR!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!' RETURN ENDPRINT '*** Table Created ***'-- Test that the table was createdSELECT *, 'TEST' AS AnyField FROM #AllSubquestions The line PRINT @SQL produces this output in Query Analyzer (I added the line breaks for forum formatting):CREATE TABLE #AllSubquestions (Col1 VARCHAR(100), Col2 VARCHAR(10), Col3 VARCHAR(10), Col4 VARCHAR(10), Col5 VARCHAR(10), Col6 VARCHAR(10), Col7 VARCHAR(10), ShowOrder SMALLINT) However, the SELECT statement to test the creation of the table produces this error:*** Table Created ***Server: Msg 208, Level 16, State 1, Procedure sp_SLIDE_CONCEPT_AllSubquestions, Line 73Invalid object name '#AllSubquestions'. It appears that the statement to create the table works, but once I try to access it, it doesn't recognize its existance. Any ideas?
View 4 Replies
View Related
Aug 23, 2013
I have a view which works fine but I cannot display the data in the Report tool because its
CCSID is HEX. If I could create it to temp table
I think then there would be an easy way to get around this problem.
This is the code:
CREATE VIEW astlib.acbalmpk AS (
(SELECT LMLTPC, COALESCE(IRLOC1,'') as IRLOC1,
COALESCE(IRLOC2,'')
as IRLOC2, COALESCE(IRLOC3,'') as IRLOC3, IRPRT#, IRQOH#, IRWHS#,
'' as IEPRT#, '.00' as IEQOH#, '' as IELOC1, '' as IELOC2, '' as
IELOC3, '' as IERIDC, '' as IEWHS#
[Code] ....
View 2 Replies
View Related
Feb 22, 2007
I have to select several field values from a table and need to assign them to different variables in my SP.Here's what I do now:
declare @ReceiverEmail nvarchar(50)
SET @ReceiverEmail=(SELECT Email FROM Users WHERE UserCode=@UserCodeOwner)
declare @UsernameSender nvarchar(50)
SET @UsernameSender=(SELECT Username FROM Users WHERE UserCode=@UserCodeOwner)As you can see I have to search the Users table twice: once for the Email and a second time for the Username...and all that based on the SAME usercode...:SSo, is there an option where I only have to search the table once and return the Email and UserName fields and assign them to my variables (without using a temp table....)?
View 4 Replies
View Related
Jul 20, 2005
HiI need some help on achieving the following:I wrote a querie which collects Data out of three Tables, the Resultlooks like this:SET NOCOUNT ONDECLARE @ROWINTDECLARE @CURPTNO CURSORSET @CURPTNO = CURSORFORSELECT * FROM TEMPOPEN @CURPTNOFETCH NEXT FROM @CURPTNOINTO @ROWWHILE (@@FETCH_STATUS = 0)BEGINSELECT ONE.CYNO, ONE.ROLE, ONE.ROL_BEZ, ONE.PTNO, ONE.NOCY, TWO.TEXTAS NOCY_TEXTFROM(SELECT CY.CYNO,RE.CYNO AS RECYNO, RTRIM(RE.ROLE) AS ROLE, RTRIM(V_ROLE.TEXT) ASROL_BEZ,RE.PTNO AS PTNO, RTRIM(RE.NAME) AS SACHBEARBEITER, RE.NOCYFROM CYRIGHT OUTER JOINRE ON RE.CYNO = CY.CYNOINNER JOINV_ROLE ON RE.ROLE = V_ROLE.CODEWHERE (RE.PTNO IN(SELECT PT.PTNOFROM PTWHERE PT.PTNO IN(@ROW)AND V_ROLE.LANGUAGE = PT.CLANG))) AS ONELEFT JOIN(SELECT V_NOCY.CODE, V_NOCY.TEXTFROM V_NOCYINNER JOINPT ON PT.CLANG = V_NOCY.LANGUAGEAND PT.PTNO IN (SELECT PT.PTNOFROM PTWHERE PT.PTNO IN(@ROW))) AS TWOON ONE.NOCY = TWO.CODEFETCH NEXT FROM @CURPTNOINTO @ROWENDCLOSE @CURPTNODEALLOCATE @CURPTNOThe Result looks like this:RS1:6313,1300,Architekt,99737505,NULL,NULL2392762,100,Bauherr,99737505,NULL,NULLRS2:2693265,100,Bauherr,99756900,NULL,NULLNULL,1,Planer,99756900,2,Bauherr macht Pläne selberRS3:2691919,100,Bauherr,99755058,NULL,NULL2691962,6000,Kontakt,99755058,NULL,NULLMy Problem is, that I need to have all the Resultsets in one Table atthe end.So my further undertaking was to create a Temp Table with theexpectation to receive all the resultsets in one Step.The TSQL for this looks like that:SET NOCOUNT ONCREATE TABLE #CYRE_TEMP(CYNOINT NULL,ROLEINT NULL,ROL_BEZVARCHAR (60) NULL,PTNOINT NULL ,NOCYINT NULL,TEXTVARCHAR (60) NULL)GODECLARE @CYNOINT,@ROLEINT,@ROL_BEZVARCHAR (60),@PTNOINT,@NOCYINT,@TEXTVARCHAR (60),@ROWINT,@CURPTNOCURSORSET @CURPTNO = CURSOR FORSELECT PTNO FROM TEMPOPEN @CURPTNOFETCH NEXT FROM @CURPTNOINTO @ROWWHILE (@@FETCH_STATUS = 0)BEGININSERT INTO #CYRE_TEMP (CYNO, ROLE, ROL_BEZ, PTNO, NOCY, TEXT)VALUES(@CYNO,@ROLE ,@ROL_BEZ ,@PTNO ,@NOCY ,@TEXT)SELECT @CYNO = ONE.CYNO,@ROLE = ONE.ROLE,@ROL_BEZ = ONE.ROL_BEZ,@PTNO = ONE.PTNO,@NOCY = ONE.NOCY,@TEXT = TWO.TEXTFROM(SELECT CY.CYNO, RTRIM(RE.ROLE) AS ROLE, RTRIM(V_ROLE.TEXT) ASROL_BEZ,RE.PTNO AS PTNO, RTRIM(RE.NAME) AS SACHBEARBEITER, RE.NOCYFROM CYRIGHT OUTER JOINRE ON RE.CYNO = CY.CYNOINNER JOINV_ROLE ON RE.ROLE = V_ROLE.CODEWHERE (RE.PTNO IN(SELECT PT.PTNOFROM PTWHERE PT.PTNO =@ROWAND V_ROLE.LANGUAGE = PT.CLANG))) AS ONELEFT JOIN(SELECT V_NOCY.CODE, V_NOCY.TEXTFROM V_NOCYINNER JOINPT ON PT.CLANG = V_NOCY.LANGUAGEAND PT.PTNO IN (SELECT PT.PTNOFROM PTWHERE PT.PTNO =@ROW)) AS TWOON ONE.NOCY = TWO.CODEFETCH NEXT FROM @CURPTNOINTO @ROWENDCLOSE @CURPTNODEALLOCATE @CURPTNOSELECT * FROM #CYRE_TEMPDROP TABLE #CYRE_TEMPGOAnd the Output looks like this now:Q1:NULL,NULL,NULL,NULL,NULL,NULL2392762,100,Bauherr,99737505,NULL,NULLNULL,1,Planer,99756900,2,Bauherr macht Pläne selberCan someone help me getting all the 6 Rows into one Table as Output?I appreciate any available Help on this..Ssscha
View 1 Replies
View Related
May 8, 2006
Sorry guys I know this is easy but I've been looking for about an hour for a straight forward explanation.
I want to store a user's wish list while they browse the site, then they can send me an enquiry populated with their choices.
Basically, a shopping cart!
I thought of using session variables and string manipulations but I am more comfortable with DB queries.
a simple 4 column table would cover everything.
SQL server and VBScript
Thanks
M
View 4 Replies
View Related
Apr 11, 2007
Hello
I have a local SQL2005 server with a linked SQL2000 server. I would like to know how to create a temporary table in the remote server in such a way that I can make an inner join as follows; my idea is to optimized a distributed query by doing so:
create table #myRemoteTempTable
insert into #myRemoteTempTable
select * from myLocalTable
update myRemoteTable
set
Value=#myRemoteTempTable.Value
from myRemoteTable
inner join #myRemoteTempTable on #myRemoteTempTable.ID=myRemoteTable.ID
View 6 Replies
View Related
Feb 18, 2008
Is there a way to find out what the datatypes of a temp table are?
Example:
select cust_code, cust_name, cust_state
into #customers
where cust_state = 'TX'
I would like to know what datatypes SQL used when creating #customers.
Thank you for all the help.
View 2 Replies
View Related
Jun 19, 2008
Hi all
I'm new to sql and could do with some help resolving this issue.
My problem is as follows,
I have two tables a BomHeaders table and a BomComponents table which consists of all the components of the boms in the BomHeaders table.
The structure of BOMs means that BOMs reference BOMs within themselves and can potentially go down many levels:
In a simple form it would look like this:
LevelRef: BomA
1component A
1component B
1Bom D
1component C
What i would like to do is potentially create a temporary table which uses the BomReference as a parameter and will loop through the records and bring me back every component from every level
Which would in its simplest form look something like this
LevelRef: BomA
1......component A
1......component B
1......Bom D
2.........Component A
2.........Component C
2.........Bom C
3............Component F
3............Component Z
1......component C
I would like to report against this table on a regular basis for specific BomReferences and although I know some basic SQL this is a little more than at this point in time i'm capable of so any help or advice on the best method of tackling this problem would be greatly appreciated.
also i've created a bit of a diagram just in case my ideas weren't conveyed accurately.
Bill Shankley
View 4 Replies
View Related
Jan 4, 2008
I have 2 tables:
Customer Table: ID, OrderID (composite key)
100, 1
100, 2
200, 3
200, 1
Order Table: OrderID, Detail
1, Orange
2, Apple
3, Pineaple
Assuming each customer always orders 2 items. I need to create a SQL query that shows as following (a view or a temp table is OK). How do I do that?
CustomerID, Order Detail1, Order Detail2
100, Orange, Apple
200, Pineaple, Orange
View 10 Replies
View Related
May 8, 2014
I would like to know if the following sql can be used to obtain specific columns from calling a stored procedure with parameters:
/* Create TempTable */
CREATE TABLE #tempTable (MyDate SMALLDATETIME, IntValue INT)
GO
/* Run SP and Insert Value in TempTable */
INSERT INTO #tempTable (MyDate, IntValue)
EXEC TestSP @parm1, @parm2
If the above does not work or there is a better way to accomplish this goal, how to change the sql?
View 1 Replies
View Related
Dec 29, 2006
Hi
Folx,
I
am new to SQL Server and I am struggling.
Versions:
Microsoft
SQL Server Integration Services Designer Version
9.00.1399.00
Microsoft
SQL Server Management Studio 9.00.1399.00
I
would like to
01.
create a temp table
02.
load the temp table from a flat file
03.
insert into a destination table the rows from the temp table where NOT EXIST the
primary key of the destination table.
ISSUES:
Flat
File Source will not accept that a resource will be available that does not yet
exist (the temp table)
I
set the Flat File Source to €œIgnore Failure€? and ran the package. It ran with
warnings but did not insert the new rows.
The
€œIgnore Duplicates€? radio button is €œgrayed out€? because the index is clustered
Now
I could work around this thing by keeping a table just for purposes of this
process flow. I am opposed to that philosophically and would prefer to do this
in the way that I consider appropriate€¦is there a solution?
Thanks,
Bill
View 4 Replies
View Related
May 20, 2008
the subject pretty much says it all, I want to be able to do the following in in VB.net code):
{[If [table with this name] already exists [in this sql database] then [ don't create another one] else [create it and populate it with these values]}
How would I do this?
View 3 Replies
View Related
Jun 26, 2007
I am a starter of vb.net and trying to build a web application. Do anyone know how to create a temp table to store data from database? I need to extract data from 3 different tables (Profile,Family,Quali). Therefore, i need to use 3 different queries to extract from the 3 tables and then store it in the temp table. Then, i need to output the data from temp table to the screen. Do anyone can help me?
View 2 Replies
View Related
Jun 17, 2015
I pulled some examples of using a subquery pivot to build a temp table, but cannot get it to work.
IF OBJECT_ID('tempdb..#Pyr') IS NOT NULL
DROP TABLE #Pyr
GO
SELECT
vst_int_id,
[4981] AS Primary_Ins,
[4978] AS Secondary_Ins,
[code]....
The problems I am having are with the integer data being used to create temp table fields. The bracketed numbers on line 7-10 give me an invalid column name error each. In the 'FOR', I get another error "Incorrect syntax near 'FOR'. Expecting '(', or '.'.". Â The first integer in the "IN" gives me an "Incorrect syntax near '[4981]'. Expecting '(' or SELECT". Â I will post the definitions from another effort below.
CREATE TABLE #Pyr
(
vst_int_idINTEGERNOT NULL,
--ivo_int_idINTEGERNOT NULL,
--cur_pln_int_idINTEGERNULL,
--pyr_seq_noINTEGERNULL,
[code]....
SQL Server 2008 R2.
View 3 Replies
View Related
Sep 30, 2015
I have an Access app. that I am migrating the DB portion (queries, tables) to SQL server. I need to create a temp table that lasts as long as the user has the Access FE app. open. Idea is that the temp table stores the user's parameters (used for filtering data entry forms and report). The parameters allow the app. to only show the user his data (cannot view other users data). The SP shown below works OK, it creates a ##Temp table and updates it with the parameters sent by Access FE app. The issue I am having is that as soon as the SP finishes the ##Temp table is removed. I thought of using a regular table, but, I am currently testing this migration in my local SQL server instance, as soon as I move the database to production environment, then users will not be able to create tables as permissions are only read/write.
USE [Work_Allocation]
GO
/****** Object: StoredProcedure [dbo].[spUser_Parameters_update] Script Date: 9/30/2015 12:27:42 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[spUser_Parameters_update]
[code]...
View 10 Replies
View Related
Jun 9, 2014
I want to generate dynamic temp table so, from one strored procedure am getting an some feilds as shown below
CM_id,CM_Name,[Transaction_Month],[Transaction_Year],''[Invoice raised date],''[Payment Received date],''[Payout date],''[Payroll lock date]
for i want to generate table for the above feilds with datatype
View 5 Replies
View Related
Apr 29, 2015
I want to create index for hash table (#TEMPJOIN2) to reduce the update query run time. But I am getting "Warning!
The maximum key length is 900 bytes. The index 'R5IDX_TMP' has maximum length of 1013 bytes. For some combination of large values, the insert/update operation will fail". What is the right way to create index on temporary table.
Update query is running(without index) for 6 hours 30 minutes. My aim to reduce the run time by creating index.Â
And also I am not sure, whether creating index in more columns will create issue or not.
Attached the update query and index query.
CREATE NONCLUSTERED INDEX [R5IDX_TMP] ON #TEMPJOIN2
(
[PART] ASC,
[ORG] ASC,
[SPLRNAME] ASC,
[REPITEM] ASC,
[RFQ] ASC,Â
[Code] ....
View 7 Replies
View Related
May 13, 2008
Hi!
I need to expand resursion level for resursive CTE expression within CREATE FUNCTION statement for inline table function to a value greater than default. It turns out that OPTION clause for MAXRECURSION hint perfectly works if I use it outside CREATE FUNCTION (as well as CREATE VIEW for non-parametrized queries), but it does not within CREATE FUNCTION statement - I'm getting error:
Msg 156, Level 15, State 1, Procedure ExpandedCTE, Line 34
Incorrect syntax near the keyword 'option'.
Here is the function:
create FUNCTION [dbo].[ExpandedCTE]
(
@p_id int
)
RETURNS TABLE
AS
RETURN
(
with tbl_cte (id, tbl_id, lvl)
as
(
select
id, tbl_id, 0 lvl
from
tbl
where
id = @p_id
union all
select
t.id, t.tbl_id, lvl + 1
from
tbl_cte
inner join tbl t
on rnr.tbl_id = tbl_cte.id
)
select
id, tbl_id, lvl
from
tbl_cte
option (maxrecursion 0)
)
Please help!
Alexander.
P.S.
I'm really sorry if it is about syntax, but I could not find it in the documentation.
View 12 Replies
View Related
