Best Practice For Data Size/Log Size Ratio
Jul 23, 2005
Just wanted to know what is a general rule of thumb when determining log file space against a database's data file.
We allow our data file for our database to grow 10%, unlimited. We do not allow our log file to autogrow due to a specific and poorly written process (which we are in a three month process of remove) that can balloon the log file size.
Should it be 10% of the Data file, i.e. if the Date file size is 800MB the log file should be 8MB?
I realize there are a myraid of factors that go against file size but a general starting point would be nice.
Thanks
Jeff
--
Message posted via http://www.sqlmonster.com
View 4 Replies
ADVERTISEMENT
Sep 4, 2007
I am trying to resize a database initial log file from 500M to 2M. I€™m using€?
ALTER DATABASE <DBNAME> MODIFY FILE ( NAME = <DBLOGFILENAME, SIZE = 2 ) "
And I'm getting "MODIFY FILE failed. Specified size is less than current size." I tried going into the database properties and setting the log file to 2M, but it doesn€™t keep the changes.
Any help with this process?
View 1 Replies
View Related
Jan 24, 2006
I want to know encrypted data's size for designing database field size.
For example, cardnumber varchar(20) Encrypted by Triple_DES and PassPhrase, How match size does need to encrypted data store field.
I think the size does not depend to PassPhrase char length.
Regards,
Yoshihiro Kawabata
View 3 Replies
View Related
Aug 23, 2006
Hi, I have a problem importing data from SQL Server 2000 'text' columns to SQL Server 2005 nvarchar(max) columns. I get the following error when encountering a transfer of any column that matches the above.
The error is copied below,
Any help on this greatly appreciated...
ERROR : errorCode=-1071636471 description=An OLE DB error has occurred. Error code: 0x80004005.An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Unicode data is odd byte size for column 3. Should be even byte size.". helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC} (Microsoft.SqlServer.DtsTransferProvider)
Many thanks
View 5 Replies
View Related
Jun 15, 2006
I installed sql 2005 a while back. Then I recently found out my file system was fat32 (I don't understand why the hardware people did this...) and I had to convert to NTFS. Naturally the sql service no longer worked so I uninstalled inorder to reinstall now I can't reinstall it I keep getting this message
native_error=5039, msg=[Microsoft][SQL Native Client][SQL Server]MODIFY FILE failed. Specified size is less than current size.
I'll try to post the full log in a new post.
View 11 Replies
View Related
Mar 16, 2007
Hi folks,Can anyone enlighten me here? I'm trying to use a SPROC which, when supplied with an int, looks up the table and returns certain columns from it. I'm using a SqlCommand, here's my codebehind: ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ SqlCommand dataSource = new SqlCommand("retrieveData", new SqlConnection(dbConnString)); dataSource .CommandType = CommandType.StoredProcedure; dataSource .Parameters.AddWithValue("id", poid); dataSource .Parameters.AddWithValue("title", title).Direction = ParameterDirection.Output; dataSource .Parameters.AddWithValue("creator", creator).Direction = ParameterDirection.Output; dataSource .Parameters.AddWithValue("assignee", assignee).Direction = ParameterDirection.Output; etc, etc... And the SPROC:------------------------------------------------------------------------------------------------------------------set ANSI_NULLS ONset QUOTED_IDENTIFIER ONGOALTER PROCEDURE [dbo].[retrieveData] @id int, @title varchar(50) OUTPUT, @creator varchar(50) OUTPUT, @assignee varchar(50) OUTPUT, @contact varchar(50) OUTPUT, @deliveryCost numeric(18,2) OUTPUT, @totalCost numeric(18,2) OUTPUT, @status tinyint OUTPUT, @project smallint OUTPUT, @supplier smallint OUTPUT, @creationDateTime datetime OUTPUT, @amendedDateTime datetime OUTPUT, @locked bit OUTPUT AS /**SET NOCOUNT ON; **/ SELECT [title] AS [@title], [datetime] AS [@creationDateTime], [creator] AS [@creator], [assignee] as [@assignee], [supplier] as [@supplier], [contact] AS [@contact], [delivery_cost] AS [@deliveryCost], [total_cost] AS [@totalCost], [amended_timestamp] AS [@amendedDateTime], [locked] AS [@locked] FROM purchase_orders WHERE [id] = @id; ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ The id being passed in is definately not null, and is set to a value of an item I know exists. The resulting error is:
Exception Details: System.InvalidOperationException: String[1]: the Size property has an invalid size of 0.Line 63: retrievePODetails.Connection.Open();Line 64: retrievePODetails.ExecuteNonQuery();[InvalidOperationException: String[1]: the Size property has an invalid size of 0.] System.Data.SqlClient.SqlParameter.Validate(Int32 index) +717091... ... Can anyone see anything I'm missing? Thanks,Ally
View 1 Replies
View Related
Nov 14, 2007
Using C#, SQL Server 2005, ASP.NET 2, in a web app, I've tried removing the size from parameters of type NCHAR, NVARCHAR, and VARCHAR. I'd rather just send a string and let the size of the parameter in the SP truncate any extra chars if need be. I began getting the error below, and eventually realized it happened only with output parameters, as in the code snippet below.String[3]: the Size property has an invalid size of 0. par = new SqlParameter("@BusinessEntity", SqlDbType.NVarChar); par.Direction = ParameterDirection.Output; cmd.Parameters.Add(par); cmd.ExecuteNonQuery();What's the logic behind this? Is there any way around it other than either finding out what the size should be, or assigning a size larger than would ever be needed? ThanksMike Thomas
View 6 Replies
View Related
Jul 25, 2007
I have one db test with one .mdf and .ldf file...mdf file size is 100mb and for some reson i removed all the tablesfrom that .mdf file and transfer it into new secondary file so all thetables moved into secondary file now i want to reduce the first .mdffile from 100 mb to 50mb is that possible,it's showing 90mb is free.Please reply
View 1 Replies
View Related
Dec 11, 2007
I am getting error to run stored procedure using executenonquery method. The Stored Procedure is having OUTPUT parameter.
ExecuteNonQuery statement is called using SqlHelper.
Error : String[18]: the Size property has an invalid size of 0
View 1 Replies
View Related
Apr 20, 2015
The Tabular model is showing 19 GB on disk, but it is acquiring around 40 GB in memory.
View 3 Replies
View Related
Feb 15, 2000
Hi,
An MSSQL DB running SAP indicates a smaller DB size (MMC & SAP) than the actual physical size. The difference is about 8 GB.
A lot of records were deleted before this. Did they remain in the DB as NULL values or something ?
Does anyone know what the reason for this could be ? And how to clean this up ?
Thanks in advance,
Paul
View 2 Replies
View Related
Mar 2, 2008
Hi,
i use this script that show me the size of each table and do the sum of all the table size.
SELECT
X.[name],
REPLACE(CONVERT(varchar, CONVERT(money, X.[rows]), 1), '.00', '') AS [rows],
REPLACE(CONVERT(varchar, CONVERT(money, X.[reserved]), 1), '.00', '') AS [reserved],
REPLACE(CONVERT(varchar, CONVERT(money, X.[data]), 1), '.00', '') AS [data],
REPLACE(CONVERT(varchar, CONVERT(money, X.[index_size]), 1), '.00', '') AS [index_size],
REPLACE(CONVERT(varchar, CONVERT(money, X.[unused]), 1), '.00', '') AS [unused]
FROM
(SELECT
CAST(object_name(id) AS varchar(50)) AS [name],
SUM(CASE WHEN indid < 2 THEN CONVERT(bigint, [rows]) END) AS [rows],
SUM(CONVERT(bigint, reserved)) * 8 AS reserved,
SUM(CONVERT(bigint, dpages)) * 8 AS data,
SUM(CONVERT(bigint, used) - CONVERT(bigint, dpages)) * 8 AS index_size,
SUM(CONVERT(bigint, reserved) - CONVERT(bigint, used)) * 8 AS unused
FROM sysindexes WITH (NOLOCK)
WHERE sysindexes.indid IN (0, 1, 255)
AND sysindexes.id > 100
AND object_name(sysindexes.id) <> 'dtproperties'
GROUP BY sysindexes.id WITH ROLLUP) AS X
ORDER BY X.[name]
the problem is that the sum of all tables is not the same size when i make a full database backup.
example of this is when i run this query against my database i see a sum of 111,899 KB that they are 111MB,but when
i do full backup to that database the size of this full backup is 1.5GB,why is that and where this size come from?
THX
View 5 Replies
View Related
Apr 14, 2015
Here are my scenarios:
We have an application with replicated environment setup on sql server 2012 . Users will have a replica on their machines and they will replicate to the master database. It has 3 subscriptions subscribed to the publications on the master db.
1) We set up a replica(which uses sql server 2012) on a machine with no sql server on it. After the initial synchronization(used replmerge tool) the mdf file has grown to 33gigs and ldf has grown to 41 gigs. I went to sql server management studion . Right click and checked the properties of the local database. over all size is around 84 gb with little empty free space available.
2) We set up a replica(which uses sql server 2012) on a machine with sql server 2008 on it. After the initial synchronization(used replmerge tool) the mdf file has grown to 49 gigs and ldf has grown to 41 gigs. I went to sql server management studio , Right click and checked the properties of the local database. over all size is around 90 gb with 16 gb free space available.
3) We set up a replica(which uses sql server 2012) on a machine with sql server 2012 on it. We have dropped the local database and recreated the local db and did the initial synchronization using replmerge tool. The mdf file has grown to 49 gigs and ldf has grown to 41 gigs. I went to sql server management studio , Right click and checked the properties of the local database. over all size is around 90 gb with 16 gb free space available.
Why it is allocating the space differently? This is effecting our initial replica set up times.
View 0 Replies
View Related
Sep 22, 2004
Hi!
I'm using SQL Server 2000!
How to know then Data files size and Log files size by Store Procedures or Sql query?
Thanks!
View 1 Replies
View Related
Jun 10, 2014
It is possible to find table size and in that table each row size.
View 4 Replies
View Related
Jun 20, 2007
hi
in sql server i set the datastype en size of the column messagetext to nvarchar and max
but how do i set max in the code below cause i only can set an int in the place where the datasize has to be
objCmd.Parameters.Add("@MessageText", SqlDbType.NVarChar, 50).Value = txtbericht.Text
tnx
View 1 Replies
View Related
Aug 11, 2000
Hi,
I am using
exec sp_helpdb
go
dbcc sqlperf(logspace) for
getting database size and log size. Is this gives the correct
database size and log size or Is there any other way to get the logsize and database size by means of query analyzer.
Thanks in Advance.
Seenu. S
View 4 Replies
View Related
Jul 20, 2005
I have a SQL Server database that is showing 2853.44 mb in size but when Iexport the data into MS Access the size is less than 1 mb. Can anyone tellme how to reduce the size of my SQL Server database so that it's less than15 mb?Thanks in advance! Rob
View 5 Replies
View Related
Oct 30, 2007
Why is it that lately our full backup (.bak) file size is more than 2x the size of the actual database file size (.mdb)?
View 9 Replies
View Related
Aug 14, 2006
hi
just wondering if any expert out there can answer my question.
i got a database separate into 3 datafiles in 3 different drives.
i will name it A, B, C.
A datafile size 30G, B datafile size 15G, C datafile size 15G.
and the drive for datafile A is about full. so is there anyway i can more some of data from A datafile to other data file? or since A+B+C =60G can i make it all 20G for each one of them by any command? thanks!!! :)
View 4 Replies
View Related
Sep 30, 2005
So which is the biggest database you have worked with ?
View 8 Replies
View Related
Apr 27, 2004
SELECT size_in_mb,used_size_in_mb,size_in_mb-used_size_in_mb as free_in_mb FROM (
SELECT cntr_value/1024 size_in_mb ,
(SELECT cntr_value/1024 FROM master..sysperfinfo WHERE counter_name='Log File(s) Used Size (KB)' AND instance_name='mydb') used_size_in_mb
FROM master..sysperfinfO WHERE counter_name='Log File(s) Size (KB)' AND INSTANCE_NAME='mydb'
) a
I need to store totalsize,usedsize,freesize of the datafiles in a table to get an average of how much my datafile has increased over a week.
The above query i am using is for logfile size. Can any one help me with datafile size plz.
I've checked sp_helpfile, sysfiles but couldn't find what i am lookin for(used and free space). EM in taskpad view for a database shows the statistics for the datafile. I've tried a trace to find out a stored procedure but couldn't!!!
May be i am unaware of a simple stored-procedure that can do this for me.
Howdy!
View 3 Replies
View Related
Sep 21, 2005
How can I find out the original size of the Data and Log files?TIARob
View 2 Replies
View Related
Jan 17, 2007
hi,
can anybody advice me how to find the size of the data replicated every minute. is there and procedure for getting the size of replicated data.
Thanks in advance
Jacx
View 1 Replies
View Related
Mar 28, 2007
Does SQL Server 2005 Enterprise 64bit can handle 250 - 300 terabyte of data considering my DBA is guru.
Thank you - Ashok
View 2 Replies
View Related
May 10, 2007
Hi
I'm trying to figure out how to retrieve the size of the data used per record, not the allocated size per row.
Any pointers would be helpfull.
Thanks in advance!
Rgds,
Worf
View 1 Replies
View Related
Jul 31, 2015
I have a report where in I have a combination of matrix ,table data regions.
The problem what I am facing is that the data tables don't remain fixed in their position and they tend to move down.
E.g. table 1 and table 2Â are on the same page in design time side by side (right and left)however during the runtime the table1 is pushed down and table2 is at its position .
Now how can I keep them all fixed in their same position. Most of the tables have fixed size rows and some who have high size of rows have been put at the end . What settings we can set?
View 6 Replies
View Related
Jun 30, 2007
how can i change the initial size of the data and log file size ??? in my database properties it shows that my data file size is 81 mb and log file size is 985 mb! but my database only contains some tables and stored procedures with few rows of data in each tableand i checked that the actual mdf and ldf files are really that big... i tried to change it but it didn't work...can someone please teach me how to change it thanks!
View 2 Replies
View Related
Jul 2, 2001
I am trying to find a way to look at the size of each table in a database and the last time each table was updated/accessed by a user. I was just given control over a DB that is VERY BADLY maintained and I want to look at what I can get rid of in it. I want to start deleating by size and last used. I can find creation dates for the tables and row counts but not total size and last update/access of the tables. Does anyone know how to get this information?
Thanks,
Nathan
View 4 Replies
View Related
Jul 30, 2007
Hello Guys,
Just wondering if someone can help me decrease the size of mdf and ldf files. In the past production database "NewUniverse" had been allocated space of 100 GB for mdf file and 8 GB of ldf file. However the data file has only used 30 GB of data. But now due to disk space related reason, I tried to decrease the datafile size from 100 GB to 40 GB. But I am not able to do it.
Any help in this regard would be appreciated.
View 4 Replies
View Related
Nov 12, 1998
I am trying to compute the actual size of data and indexes in my database.
I have used DBArtisan,Desktop DBA and SEM , they all gave me different results.
Does any body now a valide , correct way of determining the size and the utilization of the database.
-Also I am trying to come up with archive/purge procedures , is their publications,white papers or ideas about this issue.
Thanks in Advance
Elias Akouri
View 1 Replies
View Related
Jun 6, 2004
Hi
I installed " Web Wiz Forum ASP SQL 2000 DB "
it work fine but
when i added some data in the forum for example my db size is 1.45 MB
after i delete those data the db size will not decrease
is there any code that i must enter on the sql server setup file
Excuse me i asked this question in the web wix forum site but they don`t
answer me
if know what i must to do plz tell me
Thanks
View 6 Replies
View Related
Oct 5, 2005
I need to store images in MS SQL. I have the upload procedures and stuff but I'm missing the point about the image data type size.
It is supposed to be able to store up to 2Gb!!! but when I declare the data field image I can't specify the max size for the field and by default is 16 !!
16 bytes!! what can I do with that?
How can I insert a file?
Please help
View 2 Replies
View Related
