Is there any tool that will allow me to create a script for creating a database with all its objects like triggers, indexes, relationships etc. and also populating the tables with data ? So far I haven't found any.
View 1 RepliesI'm setting up a simple SSRS implementation for a non-profit organization, using two servers hosted at a data center. The first server has SQL Server Standard Edition and Reporting Services installed. I've designed and deployed a number of useful reports on this server.
I was hoping to isolate this first server by installing IIS and SSRS on the second server, have users browse from the Internet to that second server (over SSL, of course), and have all reports served up from databases (and, presumably, the report server database) on the first server.
During the installation of SSRS on the second server, however, I'm being prompted to specify the service account. According to the help text:
"Reporting Services. Service accounts are used to configure a report server database connection. Choose a domain user account if you want to connect to a report server database on a remote SQL Server instance. If you are using a local report server database, you can use a domain user account or Local System to run the service."
I believe I want to configure SSRS to connect to a report server database on a remote SQL Server instance; therefore, it appears that I need to enter a domain user account. The only problem is, neither server belongs to a domain; they are members of a simple two-server workgroup.
Does SSRS, configured to connect to a report server database on a remote SQL Server instance, require a domain? Does what I'm hoping to accomplish require a domain? Creating a two-server domain seems like overkill for this implementation, doesn't it?
I appreciate any comments and suggestions. Thanks!
Hi there.
Here is my problem: I'm trying to copy a few tables from an ODBC database located on a PC on my LAN to a SQL Server on a remote server.
To do this I have created a DTS package on the SQL Server which runs smoothly, copying the data as it should, but only as long as it copies the data from the ODBC database on my own computer where I have Enterprise Manager installed. The moment I try to copy data from another PC in the network where Enterprise Manager is not used to execute the DTS package the task fails to run.
I'm quite at a loss here and would very much appreciate a notch in the right direction. Perhabs some source or book which I may read to solve the problem.
/Bakkegaard
hello everyone,
i am developing a application using C#and .NEt compact framework.
for that i need to sync pda data (in xml format) with the remote database server(SQL) and vice versa.
please help me out
thanks in advance.
We have a SQL database that uses Active Directory with Windows Authentication. Can users that are members of the Active Directory group that has read/write access to the SQL database create ODBC connections to access the database directly and update the data? They dont have individual logins on the server. They are only members of the Active Directory group that has a login?
View 1 Replies View Relatedhi,i have an sql database on my server on the world wide web.i can make a connection to the database in visual web developer and all the tables etc are shown in the 'database explorer' of visual web developerwhen i make the query in visual web developer it does retrieve the data froom the remote server database when i 'test query'.... so looking great!the connection string in the webconfig file is left as the default when i run the prgram on my LOCAL HOST with the inbult server that comes with visual web developer it runs fine......so.....running on my local pc it will connect to the database on my www host server and does display the data from that database.i need to change the webconfig files path to the connection by default it is |DataDirectory|if i change this to the path i suspect is correct as this is the connection i use to the database C:Inetpubvhostsarcvillage.comhttpdocsApp_DataTestdatabase.mdfwhen i change the path in webconfig then it stops working on my localhost and the error when i ftp it to my host is:Failed to generate a user instance of SQL Server due to failure in retrieving the user's local application data path. Please make sure the user has a local user profile on the computer. The connection will be closed. any ideas?
View 2 Replies View RelatedWhen copying data to a remote SQL2K5 destination from a SQL2K5 source database, both using mixed sql server security mode, my job generates the following error:
[Transfer SQL Server Objects Task] Error: Execution failed with the following error: "Cannot apply value null to property Login: Value cannot be null..".
This occurs after the destination database tables have been truncated and replacement data from the source would begin to copy.
The same process can be successfully completed from the Management studio with a simple data export process. However, when I run the saved package again from the BI interface, I get this error.
My search engine searches have yielded numerous hits of others having the same problem with one microsoft rep indicating it was a bug and would be resolved in sp1. I am working with sp1. Oddly, there is only mention of this in the forums. No KB article from MS addresses the problem and I do not see it addressed elsewhere at sqlservercentral.
It appears that others have switched to Integrated Security and resolved the problem. However, I do not have that option with a remotely hosted database.
Does anyone have any information concerning this problem?
Is it possible for retriving data from a remote Sql server database and storing it in a local sqlserver database.
View 1 Replies View RelatedI am using C# in Visual Studio 2008 and remote database as sql server 2008 R2. I want to read remote database table's field value and i have to move that read value to string variable. how to do it.
And my code is :
string sql = "Select fldinput from tmessage_temp where fldTo=IDENT_CURRENT('tmessage_temp')";
SqlCommand exesql = new SqlCommand(sql, cn);
exesql.CommandType = CommandType.Text;
SqlDataReader rd1 = default(SqlDataReader);
rd1 = exesql.ExecuteReader();
I am using SQL express and Visual web developer on windows Vista.
When I try to create a new database the following message appears.
CREATE DATABASE permission denied in database master (error 262)
I log on to my computer as an administrator.
Help appreciated
Prontonet
hello all.., i want to make procedure can decrease totalcost from order table(database:games.dbo) with balance in bill table(database:bank.dbo). my 2 database in same server is name "boy"
i have 2 database like: bank.dbo and games.dbo
in games.dbo, have a table name is order(user_id,no_order,date,totalcost)
in bank.dbo, have a table name like is bill(no_bill,balance)
this is a list of bill table
no_bill balance
111222 200$
222444 10$
this is a list of order table
user_id no_order date totalcost
a 1 1/1/07 50$
when customer insert no_bill(111222) in page and click a button, then bill table became
no_bill balance
111222 150$
222444 10$
when customer insert no_bill(222444) in page and click a button, then message "sorry, your balance is not enough"
is procedure can take data from 2 database?mystore procedure like:ALTER PROCEDURE [dbo].[pay]( @no_bill AS INT, @no_order AS int, @totalcost AS money)ASBEGIN BEGIN TRANSACTION DECLARE @balanc AS money SET @balanc= (SELECT [balance] FROM [boysqlexpress.Bank.dbo.bill] WHERE [no_bill] = @no_bill) UPDATE [bill] SET [balance] = @balanc - @totalcost WHERE [no_bill] = @no_bill COMMIT TRANSACTIONEND it's output message "Invalid object name '<boysqlexpress>.Bank.dbo.bill'.Transaction
count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION
statement is missing. Previous count = 0, current count = 1.No rows affected.(0 row(s) returned)@RETURN_VALUE = Finished running [dbo].[pay]." plss.. help...
I am a starter of vb.net and trying to build a web application. Do anyone know how to create a temp table to store data from database? I need to extract data from 3 different tables (Profile,Family,Quali). Therefore, i need to use 3 different queries to extract from the 3 tables and then store it in the temp table. Then, i need to output the data from temp table to the screen. Do anyone can help me?
View 2 Replies View Relatedhi
my domain is hosted on a remote server
related databases are stored on a seperated DataServer
I have the name of that DataServer
and i need to create new DBs programmatically
I use this statement on my local machine
sqlstat= "CREATE DATABASE dbc_" + dbid + " ON PRIMARY" + "(Name=db_" + dbid + ", filename = '" & Server.MapPath("~/app_data") & "" + dbfilename + "')"
but it will not work , because i dont know the physical path
i cant use Server.MapPath()
How could i do?
thanks
I'm using SQL Express with Advance Services & I get this error when I try to deploy my reports. Why do I get this error
An error has occurred during report processing. (rsProcessingAborted)
Cannot create a connection to data source 'EDPSYS'. (rsErrorOpeningConnection)
The feature: "Remote access to report data sources and/or the report server database" is not supported in this edition of Reporting Services. (rsOperationNotSupported)
Justin Song
We are using SQL Server 2014 and SSDT-BI 2013. We have a reporting environment where business users create objects which need to be persisted for fiscal year reporting. Let's say for instance SQLSERVER1SRVR1 they create table objects like below in the reporting environment.
Accounting2014, Accounting2015 in AccountingDB;
Sales2014, Sales2015 in SalesDB;
Products2014, Products2015 in ProductsDB;
Inventory2014, Inventory2015 in InventoryDB etc....
These tables are persisted for auditing in a different environment SQLSERVER2SRVR2 for finance & audit folks.We would want to automate this process using SSIS to create tables in corresponding database and load data. I tried using For Each Loop container but the catch is I could loop the source or destination but how do we loop on Source & Destination at the same time (i.e when source is in AccountingDB destination to be AccountingDB, source SalesDB then destination SalesDB so on etc....
where can check for SQL Server service account write access permissions ??????
and if it don't has permission How can i set the write access permissin.
Thanks & Best Regards
Madhu
Hi,
In the new flat file connection dialog box, can i create a flat file on a remote server? thanks.
Hi,
Actaully i want to install SQL SERVER 2005 Enterprise edition in the silent mode and I was tyring to create a response file (setup.iss), but from the document provided i saw that SQL SERVER 2005 Enterprise edition doesnt create response file, and doesnt support setup.iss. So please provide me some solution where i can generate response file or some thing which is similar to that.
I'm using SQL Server 2008R2. I am developing a database which requires access to data from other servers. So far I have been creating views using OPENQUERY (where there's a performance benefit) to select specifically the columns I want. Generally, for my purposes, I find these OPENQUERY based views to perform better (some times significantly so) to simple SELECT <COLUMNS> FROM <SERVER>.<DATABASE>.<SCHEMA>.<TABLE> WHERE <Where clause Statements> format views. My understanding is that this is because an OPENQUERY "pushes" the query processing to the remote server and simply returns the final result set to the local server i.e. there's no cross-server join/synchronization going on.
My question is, if I were to create a Synonym for a table object on the remote server, where does the processing happen if I query from this Synonym or create a join with this synonym to a table in my local database?Essentially, I am trying to understand if there are any "hidden gotcha's" primarily from a performance perspective, to using synonyms.
I'm trying to write a function that will retrieve the last backup date/time of a particular database on a remote server (i.e. by querying msdb.dbo.backupset). Unfortunately, you can't use sp_executesql in a function, so I can't figure out a way to pass the server name to the query and still be able to return the datetime value back to the calling TSQL code (so that rules out using EXEC().
View 3 Replies View RelatedSQL server 2005 express reporting problem.
error message:
This feature "remote access to report data sources and/or the report server database" is not supported in this edition of reporting service
I got this error message when I try to connect to database hosted in another PC running SQL server 2000.
Is it true that SQlL server Express can only use Local Database Engine to host the database?
I have a website I'm ready to test on the server it will call home. I just got connected to the remote SQL server that it will be using. As I've been creating the site, I've been using the default SQL Express set-up in Visual Studio. Is there a way to have Visual Studio create all those default tables, procedures, etc. OR is there a way to copy all of that stuff from the SQL Express running on my machine to the remote SQL Server 2005?
-Mathminded
Hello all,
Please help....
I have a text file which needs to be created into a table (let's call it DataFile table). For now I'm just doing the manual DTS to import the txt into SQL server to create the table, which works. But here's my problem....
I need to extract data from DataFile table, here's my query:
select * from dbo.DataFile
where DF_SC_Case_Nbr not like '0000%';
Then I need to create a new table for the extracted data, let's call it ExtractedDataFile. But I don't know how to create a new table and insert the data I selected above into the new one.
Also, can the extraction and the creation of new table be done in just one stored procedure? or is there any other way of doing all this (including the importation of the text file)?
Any help would be highly appreciated.
Thanks in advance.
the subject pretty much says it all, I want to be able to do the following in in VB.net code):
{[If [table with this name] already exists [in this sql database] then [ don't create another one] else [create it and populate it with these values]}
How would I do this?
Can I dynamically (from a stored procedure) generatea create table script of all tables in a given database (with defaults etc)a create view script of all viewsa create function script of all functionsa create index script of all indexes.(The result will be 4 scripts)Arno de Jong,The Netherlands.
View 1 Replies View RelatedI have some code that dynamically creates a database (name is @FullName) andthen creates a table within that database. Is it possible to wrap thesethings into a transaction such that if any one of the following fails, thedatabase "creation" is rolledback. Otherwise, I would try deleting on errordetection, but it could get messy.IF @Error = 0BEGINSET @ExecString = 'CREATE DATABASE ' + @FullNameEXEC sp_executesql @ExecStringSET @Error = @@ErrorENDIF @Error = 0BEGINSET @ExecString = 'CREATE TABLE ' + @FullName + '.[dbo].[Image] ( [ID][int] IDENTITY (1, 1) NOT NULL, [Blob] [image] NULL , [DateAdded] [datetime]NULL ) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]'EXEC sp_executesql @ExecStringSET @Error = @@ErrorENDIF @Error = 0BEGINSET @ExecString = 'ALTER TABLE ' + @FullName + '.[dbo].[Image] WITHNOCHECK ADD CONSTRAINT [PK_Image] PRIMARY KEY CLUSTERED ( [ID] ) ON[PRIMARY]'EXEC sp_executesql @ExecStringSET @Error = @@ErrorEND
View 2 Replies View Related
I'm new to using SSIS and have been reading and learning slowly how to use it. I'm trying to create an identical copy of our database for reporting. I've used the Import/Export wizard, but have had some issues with foreign keys and with sql_variant columns.
I've tried searching for anything but haven't had any luck as of yet. I guess I don't even know where to start or what to look for.
Any help would be appreciated. Thanks!
Hello:
I have an old database created in SQL Server 2000,
now I can open, access it in SQL Server 2005 Management Studio, but I can't create Data Diagrams.
Please advise on how to make it work....
Thank you
I am trying to use the Import Wizard to setup a daily job to import new records based on an ID field (PK). The source database is remote and a replica. I am inserting new records to update my table called the same thing. Both are SQL Native Client
Code Snippet
select *
from [CommWireless].[dbo].[iQclerk_SaleInvoicesAndProducts] as S1
join [IQ_REPLICA].[dbo].[iQclerk_SaleInvoicesAndProducts] as S2
on S1.SaleInvoiceID = S2.SaleInvoiceID
where S1.SaleInvoiceID > S2.SaleInvoiceID
When I parse the query, I keep getting an error message.
Deferred prepare could not be completed.
Statement(s) could not be prepared.
Invalid object name 'IQ_REPLICA.dbo.iQ_SaleInvoicesAndProducts'. (Microsoft SQL Native Client)
Anyone know an easy why to get this to work? Or should I add a create table to verify new records?
I've used the ADS sample program and it works well. I looked at the code and changed it to VB (sorry, I'm not biligual yet), and have tried to 'adjust' it so I can connect to a remote PC (XP running IIS) instead of the local PC using the workgroup information database (system.mdw). Any ideas of the connection string that could make the connection?..my intention is to RDA once a week between a mobile device (3g/gsm) and a 'poor man's' IIS web server.
I've tried everything I can think of, and I'm sure its possible since all I'm doing is changing the connection path.
I'm using a legacy application built using VB5 and SQL Server 7. After recompiling it, and putting the database in SQL Server 2012. I want to access the current login user using the SQL function SUSER_SNAME().
This is the code.
Set rdoRes = goDatabase.Connection.OpenResultset("select suser_sname()")
But I'm unable to get the current user login in the application. If I write any other SQL statement instead of this, then it runs. But only this statement is not running. Is there any security reasons for this?
How can I connect to a remote database, based on Microsoft sql server? Is there any article that can help? I have read few over the net, but not working for me yet
View 3 Replies View RelatedI am setting up SQL audit on sql servers in my environment based on requirement. I want to create database specifications ASAP database created. I tried DDL trigger but Audit doesn't support triggers. So I created audit specifications on model database. the only problem with this is every specification created on new database with same name.database specification name includes newly created database name or other methods to create database specifications on newly created databases.
View 6 Replies View Related