Best Way To Search For All Records (Using A Case Statement In A SP)
Jul 20, 2005
I have a form with a dropdown or combo box, the user can select <All>
or pick a user name. If they pick a user name my where clause works
fine, buts what's the best way to write "Select All" if they choose
the <All>
This is what I have so far, but I don't think I should be using the
LIKE operator.
WHERE tblCase.qarep LIKE CASE @myqarep WHEN '<All>' THEN '%' ELSE
@myqarep END
and tblOffice.officecode LIKE CASE @myoffice WHEN -1 THEN '%' ELSE
@myoffice END
thanks for your help!!
View 4 Replies
ADVERTISEMENT
Feb 28, 2008
Hi ALL,
How could you make the SQL Select statement query case sensitive, what i mean is i have this select statement below ...
Select * From Staff WHERE Staff.Staff_ID = 'KabirJ' AND Staff.Password = 'KaBir1!'
and a data row in the staff table that is the following information
Staff_ID Password
Kabirj kabir1!
Since the cases in database is different then in the string provided, i want sql to return me nothing, How do i go about and achieve that???????????
Thanks
Kabir
View 2 Replies
View Related
Feb 20, 2008
i want to display records as per if else condition in ms sql query,for this i have used tables ,queries as follows
as per data in MS Sql
my tables are as follows
1)material
fields are -- material_id,project_type,project_id,qty, --
2)AB_Corporate_project
fields are-- ab_crp_id,custname,contract_no,field_no
3)Other_project
fields are -- other_proj_id,other_custname,po
for ex :
vales in table's are
AB_Corporate_project
=====================
ab_crp_id custname contract_no field_no
1 abc 234 66
2 xyz 33 20
Other_project
============
other_proj_id other_custname po
1 xxcx 111
2 dsd 222
material
=========
material_id project_type project_id qty
1 AB Corporate 1 3
2 Other Project 2 7
i have taken AB Corporate for AB_Corporate_project ,Other Project for Other_project
sample query i write :--
select m.material_id ,m.project_type,m.project_id,m.qty,ab.ab_crp_id,
ab.custname ,op.other_proj_id,op.other_custname,op. po
case if m.project_type = 'AB Corporate' then
select * from AB_Corporate_project where ab.ab_crp_id = m.project_id
else if m.project_type = 'Other Project' then
select * from Other_project where op.other_proj_id=m.project_id
end
from material m,AB_Corporate_project ab,Other_project op
but this query not work,also it gives errors
i want sql query to show data as follows
material_id project_type project_id custname other_custname qty
1 AB Corporate 1 abc -- 3
2 Other Project 2 -- dsd 7
so plz help me how can i write sql query for to show the output
plz send a sql query
View 8 Replies
View Related
Aug 28, 2015
I have a a Group By query which is working fine aggregating records by city. Now I have a requirement to focus on one city and then group the other cities to 'Other'. Here is the query which works:
Select [City]= CASE WHEN [City] = 'St. Louis' THEN 'St. Louis' ELSE 'Other Missouri City' END, SUM([Cars]) AS 'Total Cars'
From [Output-MarketAnalysis]
Where [City] IN ('St. Louis','Kansas City','Columbia', 'Jefferson City','Joplin') AND [Status] = 'Active'
Group by [City]
Here is the result:
St. Louis 1000
Kansas City 800
Columbia 700
Jefferson City 650
Joplin 300
When I add this Case When statement to roll up the city information it changes the name of the city to 'Other Missouri City' however it does not aggregate all Cities with the value 'Other Missouri City':
Select [City]= CASE WHEN [City] = 'St. Louis' THEN 'St. Louis' ELSE 'Other Missouri City' END, SUM([Cars]) AS 'Total Cars'
From [Output-MarketAnalysis]
Where [City] IN ('St. Louis','Kansas City','Columbia', 'Jefferson City','Joplin') AND [Status] = 'Active'
Group by [City]
Here is the result:
St. Louis 1000
Other Missouri City 800
Other Missouri City 700
Other Missouri City 650
Other Missouri City 300
What I would like to see is a result like:
St. Louis 1000
Other Missouri City 2450
View 5 Replies
View Related
Nov 5, 2007
I have a view where I'm using a series of conditions within a CASE statement to determine a numeric shipment status for a given row. In addition, I need to bring back the corresponding status text for that shipment status code.
Previously, I had been duplicating the CASE logic for both columns, like so:
Code Block...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE
[logic for condition 1]
THEN 'Condition 1 text'
WHEN [logic for condition 2]
THEN 'Condition 2 text'
WHEN [logic for condition 3]
THEN 'Condition 3 text'
WHEN [logic for condition 4]
THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This works, but the logic for each of the case conditions is rather long. I'd like to move away from this for easier code management, plus I imagine that this isn't the best performance-wise.
This is what I'd like to do:
Code Block
...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE shipment_status
WHEN 1 THEN 'Condition 1 text'
WHEN 2 THEN 'Condition 2 text'
WHEN 3 THEN 'Condition 3 text'
WHEN 4 THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This runs as a query, however all of the rows now should "Error" as the value for shipment_status_text.
Is what I'm trying to do even currently possible in T-SQL? If not, do you have any other suggestions for how I can accomplish the same result?
Thanks,
Jason
View 1 Replies
View Related
Aug 13, 2014
i was tasked to created an UPDATE statement for 6 tables , i would like to update 4 columns within the 6 tables , they all contains the same column names. the table gets its information from the source table, however the data that is transferd to the 6 tables are sometimes incorrect , i need to write a UPDATE statement that will automatically correct the data. the Update statement should also contact a where clause
the columns are [No] , [Salesperson Code], [Country Code] and [Country Name]
i was thinking of doing
Update [tablename]
SET [No] =
CASE
WHEN [No] ='AF01' THEN 'Country Code' = 'ZA7' AND 'Country Name' = 'South Africa'
ELSE 'Null'
END
What is the best way to script this
View 1 Replies
View Related
Jul 4, 2006
Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E
can any one help me in this?
please give me a sample query.
Thanks and Regards,
Kiran Suthar
View 7 Replies
View Related
May 5, 2015
I am attempting to run update statements within a SELECT CASE statement.
Select case x.field
WHEN 'XXX' THEN
UPDATE TABLE1
SET TABLE1.FIELD2 = 1
ELSE
UPDATE TABLE2
SET TABLE2.FIELD1 = 2
END
FROM OuterTable x
I get incorrect syntax near the keyword 'update'.
View 7 Replies
View Related
Aug 21, 2001
Hi all,
There is a requirement to perform a case-sensitive search
on a column in table. The installation of SQL Server is
case-insensitive...
Eg.: select * from t1 where c1 = 'abcd'
should return only rows where c1 = 'abcd' and not 'ABCD'
or 'Abcd' or any other.
I understand that this can be done using the CONTAINS
predicate using Full-text indexing.
select * from t1 where CONTAINS(c1,'abcd')
Is this the right solution to the problem? Has someone
had experience implementing this?
Thanks in advance.
-Praveena
View 1 Replies
View Related
Nov 21, 2001
I'm using a 'searched case' however I don't care which method I use.
I'm open to using anything....
I just want to correct a problem in my pivot table where I need to create a ficticous eventdate for 'S' records, those that do not have an event date in the past 7 days.
-- eventdate is a datetime column
select User
,res =
case res --event result
when 'S' then '0' --S generic non-event
when 'SUC' then '1' --successfull event
end
,eventdate =
case eventdate
when enventdate < getdate()-8 then getdate()-8
end
from eventlog_1 --my view of events
Server: Msg 170, Level 15, State 1, Line 8
Line 8: Incorrect syntax near '<'.
TIA
JeffP...
View 2 Replies
View Related
Jul 20, 2005
Hi,I have yet to find an answer for this:I want to do a case-sensitive query using "like" on a table in sql 7.Currently, "like" performs case-insensitive query.I understand that you can use the following query in sql 2000:SELECT *FROM table_xWHERE col1 collate SQL_Latin1_General_CP1_CS_AS LIKE '% AVE %'However, is there a similar method for sql 7?Any answer would be appreciated.Thanks,Jay
View 1 Replies
View Related
Mar 28, 2006
say, in my database there're two rows,
name age career
------------------------
dave 20 student
Dave 20 student
if i use select * from db where name='dave'
both will come out, how to do a case-sensitive that i got only the 1st row ?
View 8 Replies
View Related
May 26, 2006
Hi All,
I've looked through the forum hoping I'm not the only one with this issue but alas, I have found nothing so I'm hoping someone out there will give me some assistance.
My problem is the case statement in my Insert Statement. My overall goal is to insert records from one table to another. But I need to be able to assign a specific value to the incoming data and thought the case statement would be the best way of doing it. I must be doing something wrong but I can't seem to see it.
Here is my code:
Insert into myTblA
(TblA_ID,
mycasefield =
case
when mycasefield = 1 then 99861
when mycasefield = 2 then 99862
when mycasefield = 3 then 99863
when mycasefield = 4 then 99864
when mycasefield = 5 then 99865
when mycasefield = 6 then 99866
when mycasefield = 7 then 99867
when mycasefield = 8 then 99868
when mycasefield = 9 then 99855
when mycasefield = 10 then 99839
end,
alt_min,
alt_max,
longitude,
latitude
(
Select MTB.LocationID
MTB.model_ID
MTB.elevation, --alt min
null, --alt max
MTB.longitude, --longitude
MTB.latitude --latitude
from MyTblB MTB
);
The error I'm getting is:
Incorrect syntax near '='.
I have tried various versions of the case statement based on examples I have found but nothing works.
I would greatly appreciate any assistance with this one. I've been smacking my head against the wall for awhile trying to find a solution.
View 10 Replies
View Related
May 12, 2008
We have an in-house set of databases created by a member of staff who left the organisation in circumstances that mean he will not respond to queries relating to his work here. The programs he produced whilst in our employ are compiled and we have no access to the code, or the tools that he used (don't ask).
The programs allow the user to limit views based on various fields, but not the most useful field, a "memo" type field containing a textual description of work requests.
I only have Delphi 7 to use for the program development and have been using ADO, but my problem is I need to perform a case-insensitive search of a varchar(max) column based on text entered by user, but have been unsuccessful using LIKE and UPPER (which it appears you cannot use with a varchar).
Can anyone provide suggestions for what I am sure is a rather mundane and easy task for all of you.
Please note that I have only the Delphi, and no direct access to the SQL management tools.
Many thanks
Rob
View 5 Replies
View Related
Aug 17, 2007
Hi,
I have to search the records after the records populated.
I mean to say, i have displayed records in report, if i enter some strings in the textbox and clicked find, then it will highlight the particular records, instead of highlighting the values, is it possible to display only those particular records.
For example, say i have 50 records in a page,i entered some strings in the textbox and clicked find, then it will highlight the particular 5 records one by one which match the criteria i have entered in the texbox, instead of that i have to display only those 5 records.
Please tell me how to implement in this report,
Thanks and Regards
Altaf Nizamuddin
View 4 Replies
View Related
Jun 15, 2015
Select * FROM TAB1 wher AI_TEXT_VALUE like '%PE%'
The unfortunate thing is i get entries like <Perennial allergic rhinitis>
I am looking specifically for the term PE ( All upper case ) But keep in mind, I would need to use the LIKE operator in my where clause.
( just like in the example above )
View 7 Replies
View Related
Apr 25, 2006
Does anyone know how to how to performance case-insensitive search onXML data type in SQLServer 2005? Or I have to convert all the xml datato lower case before I store it?Thanks in advance.John
View 2 Replies
View Related
Feb 6, 2008
Hi everyone,
I am a newbie to SSIS and looking for answer to a simple search/replace style question.
I am building a derived column and looking for some expression syntax that can search for several strings in one column and set a value in a new column.
A bit like a case statement:
CASE ProductLine
WHEN 'R1' THEN 'Road'
WHEN 'M1' THEN 'Mountain'
WHEN 'T1' THEN 'Touring'
WHEN 'S1' THEN 'Other sale items'
ELSE 'Not for sale'
END,
The twist is that 'R1','M1','T1','S1' could feature anywhere in the string that is ProductLine.
Thanks for all your help,
regards,
Chris
View 12 Replies
View Related
Apr 6, 2005
Hi !!
We are doing a project where we have a table with 800,000 records. We need to implement a search on this 800,000 records. How do we do that?
Assue State = NJ
Criteria: Select County, Select City, Enter Zip Code, First Name and Last Name
This should bring up Information about the person.
How can we implement it efficiently ?
Thanks
View 26 Replies
View Related
Dec 11, 2007
Hello I am trying to create a stored procedure where the users can either type in the last name, or a wild card in order to get the values they are looking for. Sometimes they are not sure how to spell the last name and they will type in the first 2 letters or an * for all to see if they can find it that way. How can I do this??
Here is what I have so far
Code Block
ALTER PROCEDURE [dbo].[AdvSearchRevocations]
(@Enter_LastName nvarchar(25))
AS
SET @Enter_LastName = REPLACE(@Enter_Lastname, '*', '%')
SELECT LastName, FirstName, ReasonOfRevocation, TM#, [I/R #], Date
FROM dbo.Revocations_Tbl
View 8 Replies
View Related
Feb 6, 2008
Hi guys,
I am looking for some syntax to help me with a traditional search/replace style requirement. I am wanting to examine the contents of one column and populate another.
similar to this SQL case statement
CASE ProductLine
WHEN 'R1' THEN 'Road'
WHEN 'M1' THEN 'Mountain'
WHEN 'T1' THEN 'Touring'
WHEN 'S2' THEN 'Other sale items'
ELSE 'Not for sale'
END,
the twist is that R1, M1 etc. can appear anywhere in the ProductLine column.
thanks for any assistance you can provide.
regards,
Chris
View 1 Replies
View Related
Apr 6, 2004
I have to create a search textbox where if i key in the word "dog",it will search against a field called "Name" in a table.Then it will return all records where the text/data in the "Name" field contains the word "dog".For example,it will return the records where the text/data in the "Name" field has words such as "hotdog","doggie","dog barking","big dog" etc etc.
Can i use simple SQL for this or do i need to configure the full text search service on SQL server 2000 and use the FREETEXT predicate?Thank you in advance for any replies.
View 1 Replies
View Related
Dec 4, 2000
Just like Unique/Distinct command, is these some way I could list just the duplicate records from a table . The field is numeric.
Thanks a lot for you help.
View 3 Replies
View Related
Mar 21, 2006
I'm just learning to join tables and I'm trying to construct a query to tell me the following:
Table names and related columns:
Table1.HdrSys
Table2.HdrSysNum and HdrSys
Table3.HdrSysNum
Table3 contains the detail info for Table2. Table1 is the header table for Table2. So.. If I want all records in Table3 that don't have a related record in Table1, is this even possible?
I started with:
select * from Table3 a
join Table2 b on a.HdrSysNum = b.HdrSysNum
join Table1 c on b.HdrSys= c.HdrSys
-- Now.. how do I qualify the statement.. or can I with just this. Thx! Hope I wasn't too confusing.. because I tend to get that way when I'm confused!
View 4 Replies
View Related
Jul 20, 2005
Hey folks...So I have a table that looks like this:CREATE TABLE [tblStation] ([CAMPAIGN] [varchar] (8),[LISTNUM] [varchar] (10),[PHONE] [varchar] (10),[EVENTTIME] [datetime] ,[STATION] [int],[OPERATOR] [varchar] (16),[EVENTCODE] [varchar],[CALLSPAN] [decimal](18, 0),[FDISP] [int],[RECORDNUM] [varchar],[STC] [varchar],[PROMOC] [varchar],[EXP_CAMP] [varchar],[PROMO3] [varchar],[MAXATT] [char],[LISTNAME] [varchar],[SITENAME] [char],[Row_id] [int] IDENTITYIt's taking nine seconds to run the following command:SELECT count([fdisp])FROM [TrunkFiles_new].[dbo].[tblStation] WITH (NOLOCK)WHERE fdisp IS NULLAnyone familiar with a table of this size having performance likethis? The [fdisp] column has a non clustered index on it.Thanks in advance...
View 1 Replies
View Related
May 4, 2015
having some issues trying to create a query in excel 2013. I can get the data I want from sql, but I get individual transactions and I want to sum them by plu number. here is my query, I tried using group by but every time I add the field, I get an error that some other field is invalid because it's not contained in an aggregate or group by clause. btw, I didn't name these fields.
SELECT RPT_ITM_D.F254 as [Date], RPT_ITM_D.F01 As [PLU], RPT_ITM_D.F64 As [Qty Sold], RPT_ITM_D.F65 As [SOLD], OBJ_TAB.F17 As [RCode], OBJ_TAB.F29 As [Description], PRICE_TAB.F30 As [EL Price], PRICE_TAB.F31 As [Qty]
FROM STORESQL.dbo.OBJ_TAB OBJ_TAB, STORESQL.dbo.PRICE_TAB PRICE_TAB, STORESQL.dbo.RPT_ITM_D RPT_ITM_D
WHERE OBJ_TAB.F01 = RPT_ITM_D.F01 AND OBJ_TAB.F01 = PRICE_TAB.F01 AND PRICE_TAB.F01 = RPT_ITM_D.F01 AND ((RPT_ITM_D.F254>=? And RPT_ITM_D.F254<=? )AND (OBJ_TAB.F17=25))
View 8 Replies
View Related
Jan 18, 2008
I am trying to use a case statement in one of my stored proc but I am stuck a little bit.Here is a example, something like:declare @id int set @id =1case @id When 1 then select * from contactsend case but this keeps on giving me error: Incorrect syntax near the keyword 'case'. Any help is appreciated!
View 7 Replies
View Related
Apr 22, 2008
Hi I have some question regarding the sql case statment.Can i use the case statement with the where clause.Example: SELECT FirstName, IDFROM myTablewhere case when ID= '123' then id = '123' and id='124' endorder by idBut the above code does not work.
View 9 Replies
View Related
Jun 2, 2005
Hi all,
I was wondering if there is any way in an sql statement to check whether the data your trying to get out of the DB is of a particular type, ie. Int, char etc. I was thinking about a case statement such as
<code>
CASE WHEN (MyNum <> INT) then 0 end AS MyNum
</code>
This has to be included in the sql statement cause I need this field to get other data.
Any thoughts on how to achieve this would be greatly appreciated.
If I’m in the wrong thread section please advise of best one to get help in.
View 1 Replies
View Related
Sep 17, 2005
Hi !!!i hope one of the sql specialists answer me about the best and most effeceint way to acheive what i am looking for Scenario:-------------i have a 3 tables related to each other Addresses, Groups and GroupAddressthe relation is for both addresses and groups is one to many in the GroupAddress.the behaviour in the application : user can add addresses to his address list and from the address list a user can add an address to many groups like if you have Group name "Freinds" and you add me in it and you have Football team group and you add me to it like that !!!not i have another function called "copy group"in the GroupAddress i have this data as example GroupID AddressID1 41 61 21 441 72 82 62 93 133 73 10and the group ID called "Freinds"i want to copy the group so i can have another group that has the same addresses by one click rather than collectiong them again one by one ...by the way the new copy will have a new group name ( as this is thebusiness logic so user can not have dupicate group name )so what is the best SQL statement that i need to copy the group ???i hope that clear enough!
View 2 Replies
View Related
Jan 23, 2002
I am trying determine if I can do something like the code below. I have done a left join on a table. In the select statement there are three possible values. Yes, No, or NULL. I could like to use a Case statement to determine if there is Null. If so, then output N/A in place of the Null. So then my possible valus are Yes, No, and N/A.
Any clues?
Thanks,
John
SELECT TOP 100
OfferDressRoomYN.yesno as OfferDressRoom
= CASE
WHEN offerDressRoomYN.yesno IS NULL THEN 'N/A'
END,
FROM dataquestionnaire dq
LEFT OUTER JOIN yesno OfferDressRoomYN ON dq.c3_1 = OfferDressRoomYN.yesnoid
View 2 Replies
View Related
Aug 27, 2001
Hi
Can anybody tell me how to execute store procedure in the case statement.
Thanks
View 1 Replies
View Related
Sep 23, 2002
How do l use the case statement to cater for these updates.
BEGIN TRANSACTION
UPDATE TBL_DEV_OL_NEW1
SET Entity = ('AB')
WHERE AB_CLIENT = 1
COMMIT
GO
BEGIN TRANSACTION
UPDATE TBL_DEV_OL_NEW1
SET Entity = Entity + '' + ' | SB'
WHERE SB_CLIENT = 1
COMMIT
GO
BEGIN TRANSACTION
UPDATE TBL_DEV_OL_NEW1
SET Entity = 'SB'
WHERE SB_CLIENT = 1 And entity is null
COMMIT
go
BEGIN TRANSACTION
UPDATE TBL_DEV_OL_NEW1
SET Entity = Entity + '' + (' | CI')
WHERE CI_CLIENT = 1
COMMIT
GO
BEGIN TRANSACTION
UPDATE TBL_DEV_OL_NEW1
SET Entity = 'CI'
WHERE CI_CLIENT = 1 And entity is null
COMMIT
GO
BEGIN TRANSACTION
UPDATE TBL_DEV_OL_NEW1
SET Entity = Entity + '' + (' | GEMS')
WHERE GEMS_CLIENT = 1
COMMIT
GO
BEGIN TRANSACTION
UPDATE TBL_DEV_OL_NEW1
SET Entity = 'GEMS'
WHERE GEMS_CLIENT = 1 And entity is null
COMMIT
GO
View 1 Replies
View Related
