Blank Page When Printing/Exporting Prior To Every Report Page
Jan 23, 2008
I'm hoping that someone can shed some light on this for me... I'm using SSRS SP2 and I have a basic report using a single list object which, at the moment, should print only two pages based on the results of the underlying query. When previewing the report, it shows the two pages. But when the report is printed or exported, there is a blank page before each report page.
What I've done so far:
1) Verified the properties of the list object and made sure that 'Insert a page break before this list' is not checked
2) Ensured that there are no hidden objects that could be causing this behavior
3) Ensured that the report size + margins are within the boudaries of an standard 8.5x11 paper size
Any suggestions on something that would solve this issue?
Sam
View 6 Replies
ADVERTISEMENT
May 16, 2008
Hi All,
In my SSRS report. I have a report which has only one page. In preview it is showing as only 1 page but when I am printing the report. I am getting two printouts with the second page as a blank.. Please help me in printing the page that contains report. Intially I used a Page header, at that it used to print the blank page with a header only. Now as I removed the header it is printing the page without header i.e Blank Page.. So please help me in prinitng a single page that has the report. It is urgent,..
Thanks
dotnetdev1
View 5 Replies
View Related
Feb 20, 2008
Hi,
I have report with a list and a table inside it.
I want each item of the list in a new page.
So I checked the "Insert page break after this table" of the table properties to make sure that the next table is rendered on the next page.
But printing or exporting the report, a blank page with just the header and the footer is printing.
Is there a way to remove this last extra blank page?
Thanks for your time.
Navya.
View 5 Replies
View Related
Apr 15, 2008
In SRSS 2005 (SP2) my page header seems to take up the same amount of space on the
1st page it would take if it were to print; I have PRINT ON FIRST PAGE set to
false - the header doesn't print - it just leaves the same amount of space.
How do you get the report to ignore that. I do have a report header built
into the body of my report. I have tested this by increasing the size of my
page header and it does move the report up or down on the 1st page by that
amount.
View 8 Replies
View Related
May 3, 2007
I have deployed a report that is configured for landscape printing. It does print in landscape, however, only the first seven columns appear on the first page and the other five columns appear on the next page. Is there a method, like in print preview setup in MS Excel, where we can scale down the print (like to 80%) so all columns appear on each page?
Thanks!
View 3 Replies
View Related
Jan 11, 2008
Hi,
My report page settings are as follows
page width 28cm
page height 21cm
all margins 1cm
My report when rendered to the screen outputs the correct number off pages...HOWEVER when i export it to adobe i get a trailing blank page which accompanies each page break.
Can anyone please help ?
My report has a table which is bounded to a list with separate fields at the top of the list specifying the username in a text field and the table displays the user details, For each user there is a page break.
I have notice when i got rid off the list everything is ok, however the list seems to be within the boundaries of the report
View 5 Replies
View Related
Sep 26, 2007
hello there,
i have created a report now i want to have the report print on one page instead of two pages which is doing now.how can i do that.i am using SSRS 2005.
please help
cheers
zolf
View 1 Replies
View Related
Sep 26, 2007
hello there,
i have created a report now i want to have the report print on one page instead of two pages which is doing now.how can i do that.i am using SSRS 2005.
please help
cheers
zolf
View 3 Replies
View Related
Jan 10, 2008
I have report with a table, that generates rows to more than 1 page. When the user prints the report, each page should show the table header.
Presently or by default , the table header is shown(printed) only on the first page.
Please let me know, how can I achieve this.
View 4 Replies
View Related
Mar 31, 2007
hi i am very concerned about this problem in my report.
to solve this problem i increased the height of page footer,blank page vanishes but the page footer is not printing on every page,it is only printing on 1 st page .
i am having probelm because the records from the dataset are more than the page limit , page break is there but no footer is printing on the second page only blank space is there.
can u please help me out from this problem??
View 1 Replies
View Related
Mar 9, 2007
Hi all. My name is Guilherme and I'm a Braziliam software developer.
I've installed on my computer all the software required to work with MS SQL RS. I log on this computer using my domain user. and a few days ago i needed to change my password (network policy)
Now, when I open the adress http://localhost/reports on my computer, I can't see the installed reports, neither the configuration page.
What should I do?
Thanks in advance.
View 1 Replies
View Related
Oct 18, 2007
All I see is:
SQL Server Reporting Services
Home
Home | My Subscriptions | Help
Anyone any ideas on how I get the rest of the page back?
If I go to the reports home page, I get:
Reporting Services Error
The permissions granted to user 'NT AUTHORITYIUSR' are insufficient for performing this operation. (rsAccessDenied) Get Online Help
SQL Server Reporting Services
I'm using Vista Ultimate and SQL Server 9.0.3159.
View 6 Replies
View Related
May 21, 2006
Hi,
I'm getting blank page when I open the Report Manager: I've got a header - "...Reporting... HOME", and then just empty space.
I had it working fine a week ago. Any ideas?
The RS runs on Win2003 Std, SQL 2005 Std.
Thanks
View 26 Replies
View Related
Apr 18, 2008
I build a long report in sql reporting(5 pages)
It has many lists.
on the 3rd page it is inserting a blank page with just the report header
I check the list before and after the page
Insert Page break before and after is "unchecked" on both the list and its grouping.
Is there anything else I can verify to find a solution to print no blank pages. The client will have my head if it is there.
Nick
View 4 Replies
View Related
Sep 22, 2015
I have a set of SSRS reports published on the server. It can be accessed through a web application or through SharePoint. Most of the reports work fine through both - web app and SharePoint. However, one of the report, which returns large amount of data has some problem:
1. It generates fine from web app
2. It generates fine from SharePoint; only if one or two values selected from Filter dropdown
3. However, if all items (about 20 items) selected from Filter dropdown... and click on View Report, it processes for a while and then shows nothing. The page remains blank.
Did some research and felt the problem is with Distributed Cache Service.
Tried restarting it; tried changing SPDistributedCacheClientSetting settings - requestTimeout, channelOpenTimeout... but didn't work.
I checked Event Viewer logs, SharePoint logs and SSRS logs but couldn't find any relevant error messages.
View 5 Replies
View Related
Apr 2, 2007
Hi All,
I am having a main report having two subreports, say M1,S1 and S2 respectively.
The issue is S2 normally tend to go beyond one page, for all pages except first page of the of the subreport I am getting the page header and footer blank,
Actually this is not loading the ReportItems that are used in main report but it shows text boxes containing strings for eg . "My Name" and date functions eg Today()
Any Solution?
Thanks and Regards
Pragash
View 1 Replies
View Related
Nov 22, 2007
What we've found is that when you have two reports where one navigates to the other, if you click on the second page of the second report, it takes you to the second page of the original report. If you navigate over to the subreport again and click for the second page, it works appropriately. This is definitely a no-go for production code and this may delay our ship date because I would think this is definitely undesirable.
Conditions:
ASP.NET Report Viewer using Remote Reports
Report that links to another report
Both reports return more than one page
Reporting Services installed
Steps to Reproduce:
Download the source code here.
Follow the directions (near the bottom of the post) to get the project set up.
Run it and click on a link in the first report to go to the second report.
Click the arrow for page 2 of the second report.
Notice how it takes you back to page 2 of the first report (this doesn't happen when you are in preview mode in the Reporting Services project and I don't believe it does this in a smart client application).
Click on a link in the first report to go back to the second report.
Click the arrow for page 2.
Notice how it takes you to page 2 of the second report.
Here is a link with source code and a more detailed explanation: http://geekswithblogs.net/robz/archive/2007/11/21/Reporting-Services-2005-BUG-Report-Linking-and-Paging---ASP.NET.aspx
So what I am looking for is both a workaround for now and if this is determined to be a bug, to be fixed in the next service pack.
View 6 Replies
View Related
Nov 11, 2015
How do I add a hard page break in the middle of a two page report? I use Microsoft reports for windows.
View 5 Replies
View Related
Jan 23, 2008
Hi:
I made a report that is 10 pages long. I like to show all the data in one page (after deployment). Any idea if this is possible?
View 8 Replies
View Related
Feb 27, 2008
Hi - I am pretty new to Reporting Services. I need to create a report where a single result row from the Select Statement populates an entire page of data. The regular grid or Matrix reports don't fit this need. Is there a simple way to do this?
Thanks - Dave
View 4 Replies
View Related
Dec 10, 2007
I have a report which is multiple pages in the report viewer. Now I want to make it shown in the webpage report viewer just in one page. Is there any ways to realize it?
Thanks
View 1 Replies
View Related
Apr 10, 2008
How can I get only one page of data each time when I call the render menthod from the SSRS webservice
View 3 Replies
View Related
Nov 11, 2015
I have created one reports but all the records are displaying on one page.find a solution to display the records page by page. I created the same report without group so the records are displaying in page by page.
View 3 Replies
View Related
Jul 25, 2007
Hi again! Now that I have fix with your help, my layout problem, I got a new one. LOL!!!!
Now my problem is when data in a report need to go on two page. The printer's give me a header on one page and a body on a second page instead of a header with a part of the body and the rest on a second page with a repeating of the header.
Following me?
Now can you help me?
Thanks in advance.
Daniel
View 9 Replies
View Related
Dec 26, 2006
I am using vb.net. and sql server 2005 reporting services. But the report in question uses the local report functionality.
I am writing a credit card processor that prints a slip at the end of the transaction. There is an annoying message form that pops up on the screen stating that it is "Printing Page 1 of Document" . It seems to be beyond my reach. Its position is the typical windows auto positioning (ala cascade). I dont want the user to see it.
How do i surpress this printing message? Is it embedded in the printer driver or spooler services? Is it surpressable from the reporting services local report configuration?
Thanx
View 1 Replies
View Related
Nov 21, 2007
Good Morning friends. I am using MS SQL Server Reporting Services version 9.00.2047.00 and I have a problem and i would like your help:
I have one report (Cuadro de Mando) and 4 subreports (subquadro, subquadro2, subquadro3, subquadro4):
Note: Nome of the subreports above, have a page break after showing the records and neither the report. The subreports are perfectly designed in the main report (Cuadro de Mando).
There is no space free between the desgin of the 4 subreports.
Each subreport are designed in only one page. I tested each one of the subreports individually and the preview of each is ok in olnly one page.
But when i test the report (€śCuadro de Mando€?) with contains the 4 subreports, one page in blank always appears between the previous page and the next page of the 4 subreports.
What can we do to solve this problem?
Thank you very much.
View 4 Replies
View Related
Mar 19, 2008
Hi,
Can some reporting expert suggest me how to acheive following scenerio?
I have simple long running Table reports having usually more then 500 rows.I want that in excel I should have 100 rows in each page.I can create a group having =Int((RowNumber(Nothing)-1)/100) and enabling page break at the end
But I also want that header to be repeated across all sheets in excel,Can I do that?
-Thanks,
Digs
View 3 Replies
View Related
Mar 24, 2008
Hi there,
Could you please fill me in on some possible reasons and solutions as to why the report server home page appears blank?
Thanks!
View 5 Replies
View Related
Oct 25, 2007
is it possible for me to force a blank page after a group break?
thks
View 1 Replies
View Related
Mar 10, 2008
Hi,I am facing a problem with page breaking, I have PDF Reports,there i need to show particular data under one group ,when ever new group starts i need to show in new page,for this i took LIst Box Control, there i kept a Table.here the problem is In list Box Properties,i selected EDIT DETAILS GROUP, there i selected Page Break at End.Finally it is fine ;But giving page break when new group starts,at last it is giving Blank Page,any one can help me.......
View 5 Replies
View Related
Dec 13, 2007
Hello:
I am running into an issue with RS2k PDF export.
Case: Exporting Report to PDF/Printing/TIFF
Report: Contains 1 table with 19 Columns. 1 column is static, the other 18 are visible at the users descretion. Report when printed/exported to pdf spans 2 pages naturally, 16 on the first page, 3 on the second, and the column widths have been adjusted to provide a perfect page span .
User A elects to hide two of the columns, and show the rest. The report complies and the viewable version is perfect, the excel export is perfect.. the PDF export on the first page causes every fith column, starting with the last column that was hidden to be expanded to take up additional width. On the spanned page, it renders the first column on that page correctly, then there is a white space gap equal to the width of the hidden columns and then the rest of the cells show with the last column expanded to take up the same width that the original 2 columns were going to take up, plus its width.
We have tried several different settings to see if it helps this issue or makes it worse. So far cangrow/canshrink/keep together have made no impact. It is not possible to increase the page size due to limited page size selection availablility for the client. There are far too many combinations of what the user can elect to show or hide to put together different tables to show and hide on the same report to remove this effect.
Any help or suggestion on this issue would be appreciated
View 1 Replies
View Related
Sep 13, 2007
Hello,
I am using the SQL Reporting services with SQL Server 2005. I am able to view my reports in the report manager however, when the report generates on my device it shows blank of 0 pages. I created a simple test report with just a header, company's logo and contact info and still no luck. I am using anoynomous user access and have given IUSR datareader access in SQL Server. Not sure where I am going wrong. I feel like I am so close...If someone out there had any success viewing reports on mobile device (WM5.0) and would be so kind to share their experience or knowledge, I would greatly appreciate it!
Thanks.
View 1 Replies
View Related
Jul 11, 2006
I have been trying for some time to create a columnar report where certain columns can be hidden as requested by the user. I have tried placing the complete column set in the report, and then hiding a subset of columns, but blank pages are produced when rendered to PDF since the report body does not appear to shrink as columns are hidden and justify themselves to the left. I have tried a table, list, and matrix to no avail...
Does anyone know of a workaround, a trick, or even a hack that may accomplish what I am after?
Thanks.
View 3 Replies
View Related
