Blank Pages While Rendering Matrix In PDF Format
Jun 1, 2007
I am using a matrix control in a report containing 2 subreports. The matrix control is present in one of the subreports. When I export the full report into the PDF,if the matrix are rendered in a single page, the report is fine and there are no blank pages. But when the number of columns exceeds the first page and moves into the second page then there are 3 blank pages in the report for every page with content. The number of blank pages after each page with content is equal to the number of times the matrix would scroll into a new page.
This problem occurs only when I try to generate the whole report in PDF. No blank pages appear when I render subreports into PDFs individually.
Please help!!
View 1 Replies
ADVERTISEMENT
Jul 23, 2007
Hello,
I have a fairly large report with multiple matrix tables. They grow to a fixed width horizontally and may grow to various heights vertically. I have the interactive height set to zero so that it displays on the web page on one screen. When I go to print this report, I am getting a blank page between each page with data. Here are my dimensions:
Report:
height: 15 in
width: 8.5 in
interactive height: 0 in
interactive width: 8.5 in
left margin: .5 in
right margin: .5 in
top margin: .5 in
bottom margin: .5 in
Body:
height: 13.3875 in
width: 6.9 in
Would this problem be due to the fact that my matrix tables span an area greater than a normal page height in design mode even before they grow dynamically? Any suggestions would be appreciated.
Thanks.
View 1 Replies
View Related
Mar 4, 2008
Hi,
I have a master report that contains 4 sub reports. The first two subreports contains matrix controls that can (and will) spill over to a second page. With 5 columns of data the matrix subreports fit nicely onto one page, 6 or more columns and they will spill into a second page. The second two subreports will always fit onto one single page. All four subreports are inside a list control which will repeat for each structure. e.g. Each subreport will be rendered once per structure.
The master report renders perfectly (with no blank pages) whenever the two subreports with the matrix controls fit on one page each. However, whenever the matrix control subreports spill into a second page it causes the master report to insert a blank page after subreport 3 and 4, bare in mind subreport 3 and 4 both fit perfectly on a single page. I've check all margins and page widths etc.
The blank page problem only occurs whenever the matrix needs to span two pages.
Anybody encountered this problem or have any ideas how to fix it? I'm beginning to think it is a bug with reporting services.
Regards,
Adrian.
View 3 Replies
View Related
Oct 22, 2007
HI All,
When I view my reports in PDF format, I can not view the whole report on a single page. Thats fine with me. But the problem is report is appear on every other page. not on continuous pages. How can I avoid blank pages?
Thanks
View 7 Replies
View Related
Oct 12, 2007
Hi,
can anyone tell me, how does Reporting Services work in the following scenario:
There is a report with multiple pages (eg. 50 pages). The user runs the report.
Question: What is transferred from the Reporting Services server to the client desktop ? all pages or just the first one ?
Background> I don't want to let the user wait until all pages are received (because he may be interested only in the first one and the jump to the last one and that is all he wants to see)
Any ideas are appreciated.
View 1 Replies
View Related
Apr 19, 2007
Hello all,
I have developed a report that when displayed in page layout view is giving me blank pages with only heaer & footer information even though none of my groups have page breaks designated. This also occurs when exported to PDF.
Can anyone provide some information on why this is occurring and how to remedy it ?
Thanks.
View 1 Replies
View Related
Apr 1, 2008
when I open report on report service it consist two pages, it's correct
but if I export report to pdf file I get two additional blank pages
it looks like - first correct page with data - blank page with header - second correct page with data -blank page with header
why I get two blank pages with data ?
View 7 Replies
View Related
Mar 20, 2008
Hi,
I've created a simple .rdl report and seems to show the preview under my visual studio. But, when I add the .rdl file into the server and export them to be a .PDF, The pdf is created with two blank pages for every single page with data.
Please comment me to fix this.
Thanks.
View 5 Replies
View Related
Feb 5, 2008
Hai,
I'm currently working in SSRS 2000. While exporting a report to PDF format, some blank pages are being added in the PDF file. Can you suggest me how to take them off. It is an urgent requirement and any feedbacks are appreciated.
Thanks in advance.
Krishna Chaitanya
View 8 Replies
View Related
Nov 13, 2007
I created a report with multiy pages and in between every page of data is a blank page. If the Report is Sixteen pages long i get eight blank pages. The Body size of the report is 8.5in, 25.475in. The Report porperities or 8.5 x 11in. Each page has a table with a page break at start set to true. But I still get blank pages in between the report.
View 4 Replies
View Related
Jul 24, 2007
Hi,
I am very new to SSRS. I developed a report which has two subreports in it. Blank page is generated at the end of each Page. Can any one help me how to avoid this.
View 1 Replies
View Related
Jul 18, 2007
I ahve a report, that has 24 fields in the layout. When I tried to print the reprot, it prints BLANK pages, in between and at the start. I have confirmed that the width BODY of the report, < width of the report properties. It still prints blank pages.Pl advise.
View 1 Replies
View Related
Jul 3, 2007
I have designed a fairly simple report in report designer that uses an analysis services cube as its input, and a basic matrix object as the primary design component. Cube performance either via object browser in Analysis Services or via connection from Excel is great. It does exactly what you build a cube for, i.e. it builds aggregations you can get to quickly. However rendering from a report designer report within Report Manager is a different story.
Even though this report is being rendered from an execution snapshot, it is painfully slow at opening and closing different levels of drill down. The report does have six levels of drill down, which I am sure is a factor. If I use a smaller dataset, performance does become more acceptable. However, I don't consider the requirements of my report to be all that extraordinary.
My conclusion thus far is that larger data sets with many possible page renderings are not the best candidates for HTML rendered reports. In this case Microsoft's cube analysis add-in to Excel might be a better choice. Thoughts and feedback on either how to improve the rendering speed or other presentation alternatives that would perform better would all be welcome.
View 5 Replies
View Related
Nov 12, 2007
I am very new to Reporting Services. When I set the report to landscape, either by setting width and height at 11 X 8.5 when in layout, or by setting landscape in page setup when I am in preview, a blank page prints in between each report page. I've checked the forum, and tried setting margins to 0, but have not had any success. I saw this response:
the body width plus margins should be less than the defined page width. but I'm not sure what settings are being referred to
Has anyone been able to solve this problem?
Thanks very much.
Sue
View 3 Replies
View Related
Mar 26, 2008
Hello,
I printed Browser Report,but it is getting Blank pages in middle,
that is header part only visible for 2 pages and then data getting printed,
any ideas??
View 2 Replies
View Related
Aug 1, 2005
I wrote a report today containing one grouping. Everything appears all right in the report preview, except that every other page is "blank", i.e., shows only the page header and page footer; all grouping and detail information is missing.
The data on the page following the blank page seems to pick up where the previous non-blank page left off, so all information seems to be present within the report.The report width and height properties are typical portrait-style -- 8.5 x 11 inches. The columns do not "run off the edge" of the report page boundary. I haven't selected any page break for the grouping, as the grouping detail is typically only a few rows long, and would otherwise result in a very large number of pages.
View 21 Replies
View Related
Oct 11, 2007
Hi there.
We have a report that has been working fine for almost a year and just recently we found a bug that when we print, the 1st 3 pages each have a single line from the table header and then the details of the table print.
The report table does have 2 subreports in detail rows. We have diligently checked to make sure that the sizes fit in both the main report and the subreports and we know that the report version did not change.
After a little digging we discovered that we recently patched RS to be version 9.2.3042. When we run the report on another RS server that is running 9.00.1406.00, it works fine. Do you know if this could be the cause? If so, is there another patch that addresses the issue?
Any help would be appreciated.
Thanks, Mike
View 3 Replies
View Related
Sep 14, 2007
Hi All
I have a report that looks and works fine in the native 'screen layout' but when I select the Print Layout option, a blank page is inserted after each page. These blank pages contain the header and footer, but not the body section of the report. Has anyone else seen this sort of thing? Is there something in my report layout causing this, or is it a bug in the Print Layout rendering?
Thanks much
View 3 Replies
View Related
May 24, 2007
All,
I am able to display the data in matrix, however I need to place it next to a table report item, so that the rows in table and matrix together would represent the data for same entity. In order to accomplish that, the Matrix rows need to be properly aligned with Table rows. But thats not happening. For some reason, in the Layout view they align properly, but when I Preview the report, the rows are not aligned. I have checked the cell sizes of both in the properties, they are both identical. So, I am very surprised why the Matrix row size is growing less than Table row size when the report is generated. Any ideas how to fix this?
Thanks.
View 1 Replies
View Related
Apr 16, 2008
Hi every one,
I am facing problem in printing the reports from browser and also when i export it to pdf,the problem i am facing is blank pages are coming when report column getting the large amount of text around 2500 characters into column value.
can any one help me in this issue?. if the report is getting acceptable amout of data it is printing in proper way i.e no balnk pages at all.i maintained all properties like margins+body size < page size.
View 4 Replies
View Related
Nov 21, 2007
Hii Everybody
i have a report which has two matrix placed in the table group header rows.
so when the matrix gives lots of data ,its coming proper in IE but its not rendering properly in firefox.
anyone can help me please.
Thanks in advance
Mahasweta
View 6 Replies
View Related
Apr 24, 2008
This must be a first, something that works in pdf, but not in html view....
I have 3 interactive sorts on 3 row groupings in a Matrix
When sorting the data in the 'preview' tab of report designer, all works well. On deploying the reports and trying to sort, I find that the report contains huge areas of white space (1 very wide empty column) and no data whatsoever, although the row grouping labels are present. Upon exporting to PDF all is ok.
Is this a known bug?
RS version = 9.00.3042.00
IE = 7.0.5730.11
View 1 Replies
View Related
Apr 16, 2008
Because i get no answers i will try it again:
Hi,
i have the following problem:
I have a matrix with a right subtotal column and this matrix was in a list (because in the end i will have more than one matrix). The list fits perfectly the matrix in design mode. But if i render the report in the viewer or to pdf, an additional blank area (like a blank copy of the subtotal column) was inserted after the right subtotal column of the matrix and increases the list too. You can see this easy by set the backgroundcolor of a list to a color. Without the subtotal column the list fits perfect after rendering. The problem is that this additional blank "column" creates empty pages in .pdf rendering, if the width of the matrix is near the page width. The same behaviour happens if i put the matrix with subtotal in a rectangle.
I must use a list in the end because the the final report contains some matrixes and a subreport.
So is this a bug?
Someone must have this problem too?
Thanks for any help.
View 5 Replies
View Related
Feb 8, 2007
Hello folks,
A while back I wrote a .NET assembly with a COM wrapper to provide an interface between Report Services and legacy MS Access applications. Basically, it returns the byte arrays from the .render method (output format emf) to be written into an Access image control.
This worked flawlessly on any 8.5"x11" RS report we threw at it on the first two Report Services I tried it against. When we set up a third Report Service at another facility, the same reports were coming out with the physical dimension metrics on the emf as10"x13", so the Access version of the report is clipped significantly on the edges.
I trapped the output into a System.Drawing.Image object in the .NET assembly and put a watch on it. The two servers that work as I expected show HorizontalResolution and VerticalResolution as 96.0946, while the one that doesn't has these values as 81.2799. The PhysicalDimension property shows 21542.3672 x 27939.4316 on the working servers and 25531.25 x 33031.25 Otherwise, the properties of the images seem to be identical. The PhysicalDimension values I see are completely consistent with the size units of 0.01 mm, as the the emf documentation indicates. The resolution of 96 is consistent with the "Windows default" values of 96 dpi. The ratio of the resolutions is correct for an 85% scaling factor for the "misbehaving" Report Service.
I have not been able to find any reason for the differences between the Report Services, and I have not been able to figure out how to control it. I tried setting DpiX and DpiY as 96 in the DeviceInfo for the render call with no change in the behavior of either server.
Can anybody enlighten me on what is happening and what I need to do to get consistent behavior between the servers? Or why the DpiX and DpiY settings for the emf rendering extension don't seem to work?
Thanks,
Tim Bailey
Energy Laboratories, Inc.
View 4 Replies
View Related
Jul 25, 2007
I have been combing the Internet trying to find a way to use the SOAP API
(ReportExecution2005) web service to render a report to HTML4.0 format with
toggle items. From what I have read, the new web services should provide
ASP.NET server-side postbacks from the toggle item images, but so far I have
seen only the same behavior as was in RS 2000, which was that the toggle item
images pointed back to the ReportServer address. The following is the device
info settings that i have used to get the images to show up on the aspx page:
<DeviceInfo><StreamRoot></StreamRoot><Toolbar>False</Toolbar>
<Parameters>False</Parameters>
<HTMLFragment>False</HTMLFragment>
StyleStream>False</StyleStream>
<Section>0</Section>
DeviceInfo>
If I switch the HTMFragment to True I don't get any toggle item images to
render on the page but the report still shows up, and when I actually set the
StreamRoot paramter to something like this
"http://[server]/[virtualdirectory]/GetImage.aspx?reportpath=[path]&streamid=" to render the toggle item images, I get a http 400 : Bad Request error page.
Can someone please provide some information or sample code on how to render
an HTML4.0 report using the SQL 2005 Reporting Services web service and
getting the toggle item images to render as well as work correctly.
Thanks,
Brian
View 3 Replies
View Related
Nov 4, 2015
I have a image in SSRS which is of PNG in format. when I preview the image it is coming as expected but if I export that to PDF the image is having the black color back ground. One more point to be noted here is my actual image file is having a small shading in it which is not visible properly, but the same back ground is coming with full black color line in the PDF form.
Another issue is : I have 3 sub reports in my SSRS report. In the preview I can see the data is coming in order of sub reports but if I export it to PDF the second sub-report data is coming at the end of the report and first and 3rd sub reports are fine. But If I have only one record for 2nd sub-report the order is same in both the Preview page as well as in the PDF format.
View 4 Replies
View Related
May 13, 2015
We are facing an issue where the report rendering for specific report parameters is failing with an exception
Throwing Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException: , Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException: An error occurred during rendering of the report. ---> Microsoft.ReportingServices.OnDemandReportRendering.ReportRenderingException: An error occurred during rendering of the report. ---> System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.ReportingServices.Rendering.SPBProcessing.Tablix.TablixContext.CalculateDetailCell(PageItem topItem, Int32 colIndex, Boolean collect, PageContext pageContext)
[code]....
The server is running in Native mode. We tried restarting the services and also verified the disk space. Neither of them worked. The ExecutionLog3 table in the "ReportServer" database shows a rrenderingError as the report execution status. Report rendering with Excel format works fine.We enabled verbose logs and they are shared here. URL....
View 7 Replies
View Related
Jun 3, 2015
I'm trying to add a custom report format to ssrs 2005 as per this [URL] I've added the code snippets in the example to three different ssrs 2005 server RSReportServer.config files but it does not work i.e do not show up in the export drop down when rendering report.
I've tried starting and stopping reporting services and it still does not works.
I've also modified the existing csv extension with different options to see if it works but to no avail.However it works with SSRS2008 R2 . In fact it works right after I saved the config file, no restart needed.For SSRS2005 the file is in C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesReportServer. I checked the registry setting just to make sure I'm looking at the correct installation 'HKEY_LOCAL_MACHINE', 'SOFTWAREMicrosoftMicrosoft SQL Server90ToolsClientSetup', 'SQLPath' The three ssrs2005 instances are in three different physical servers and the problem is with all of them so it is not an isolated incident. I've dbowner rights to all three servers. The server versions are 9.0.4060, 9.0.4035 and 9.0.4053
View 11 Replies
View Related
Sep 18, 2015
In an asp.net app I'm creating email attachments from ssrs reports and am rendering them In Word and Excel using the WORDOPENXML and EXCELOPENXML format extensions. When I render the report in excel, the image is sized correctly, however, when I render the same report in word, its very small. I will attach a screenshot of each, and in the word screenshot, I will select the image so you can see the image control's outline (the control's actual size). Notice the image inside of the border is very small. How can I resolve this?
first, excel:
and now in word:
View 3 Replies
View Related
Nov 6, 2007
Hi,
When I Preview my report then it's fine only 2 pages with no blank page with header in between.
I then deploy it & open via web.
But when i export to PDF & print it pints 3 pages with the first being a blank page with header.
Any Idea what I'm doing wrong?
Regards,
View 2 Replies
View Related
Feb 12, 2007
Jamie writes "I trying to write a SQL solution using embedded and/or dynamic SQL to convert a matrix file to a normalized format."
View 1 Replies
View Related
Feb 25, 2008
Hi,I have following data,India 91USA 01UK 44Like this, I have 100 Records (Rows) with 2 Column DataNow I want to have report like belowIndia 91 USA 01 UK 44Pakistan 92 .....How can I do this?Nilesh
View 4 Replies
View Related
Apr 24, 2007
Hi,
It looks like by default the subtotal number inherits the number format from the main column. Is there a way to override it?
In my case I am displaying percents with a decimal point in a column and sometimes the total comes out to 99.9% instead of 100%. I just want to round of the total to alway show 100%.
Is there a way to do it?
Thanks,
Igor
View 3 Replies
View Related
