I am hoping someone can guide me through this error. It appears SQL Server 2005 Management Studio might have a bug. What I am accomplishing deleting several rows from several tables inside SSMS. However, after about 4 or five deletions, I get the BLUE SCREEN of DEATH.
I can repeat this pattern.
Thanks for taking the time to read my post.
Technical information:
***STOP: 0X0000008E (0XC0000005, 0X8062C26B, 0XA84E5A58, 0X00000000)
Beginning dump of physical memory
Physical memory dump complete.
Contact your system administrator or technical support goup for further assistance.
What can i do to fix this problemHelp please, don't want to reinstall XP because i am running AutoCad on my PC.
This Blue screen of death is the worst!!!
Keron
if you encountera problem of blue screen and then you reinstall NT server, what is the quickest way to restore sql back. after installation of windows nt sql will not start, please advice anyone who knows
View 1 Replies View RelatedJust trying to find out what this error code is, and how to solve this. I have the infamous "blue screen of death" but I cannot get XP to load or even to load in "safe mode". I am hoping to save my files on this laptop.
Here is the error:
A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to be sure you have adequate disk space. If a driver is identified in the Stop message, disable the driver or check with the manufacurer for driver updates. Try changing the video adapters.
Check with your harware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
Technical information:
***STOP: 0X0000008E (0XC0000005, 0X8062C26B, 0XA84E5A58, 0X00000000)
Beginning dump of physical memory
Physical memory dump complete.
Contact your system administrator or technical support goup for further assistance.
I have tried to change my memory but that didn't seem to help. Any ideas?
Thanks for a reply,
Shan
Hi,
I have a MS Reporting Services Report which I display in a ASPX page inside a iFrame (i.e. an other ASPX page displayed inside the main ASPX page).
The report is rendered to the screen using the normal ReportViewer control.
Everything works fine, except when I click on the Print Button on the ReportViewer control, I get a Blue Screen of Death (BSOD) and my computer restarts.
This is something that happens every single time I click on that Print button
Has this happenend to anyone else?
Regards,
Thysie
I'm pretty sure this problem started after applying Windows 2000 SP2 on machines running SQL 7 SP3. It may be that I only started manipulating these particular DTS jobs since that upgrade.
Problem: In EM I open a DTS package and it causes the server machine to crash to a blue screen. This has happened from a Windows 98 workstation running against a Windows 2000 Server SP2 running SQL7 SP3 and on a standalone laptop running Windows 2000 SP2 running SQL7 desktop edition SP3
Can anyone point me to more information on why this is happening?
Thanks
Doug
When I try to print a report ( report viewer control from ASP.NET application). The print dialog box opens, once I select the printer and click ok. It show €œprinting 1 page€? for 3-4 seconds and the System(computer)crashes and displays a blue screen error. This is happening for only two of my reports. And currently we have disabled the print button for these.
View 7 Replies View Relatedget the following error when I click on prview.
Build complete -- 0 errors, 0 warnings
[rsWarningFetchingExternalImages] Images with external URL references will not display if the report is published to a report server without an UnattendedExecutionAccount or the target image(s) are not enabled for anonymous access.
[rsInvalidMIMEType] The value of the MIMEType property for the image €˜image1€™ is €œtext/html; charset=utf-8€?, which is not a valid MIMEType.
Preview complete -- 0 errors, 2 warnings
This is the URL:
http://air101/airmaps/amsexpress.aspx?sym=bigdot&mlat=42.2446&mlon=-71.1649&lat=42.2446&lon=-71.1649&wid=0.012500&ht=0.012500&mpanv=0&mpanh=0
I've been told that image is a gif how should I set the mimeType?Or is this a security issue of some sort?
I receive the Red X of death when I'm working with SQL Server 2005 community edition. Microsoft Money is causing this to happen. Whenever I move my mouse over an entry in Microsoft Money, I get an OutOfMemoryException and then all the windows in SQL Server 2005 community edition get a big red X. SQL Server 2005 community edition at that point is either not usable or it bombs on it's own.
I wrote a budgeting application for my family's use and I was using Access with no problems, but then I upgraded. It's important for me to run queries while using Microsoft Money.
Anyway, I'm looking for suggestions to keep this from happening. Here are the details.
OS: Windows XP with Service Pack II (all patches installed)
Microsoft Money 2005
My computer has 1 GB of RAM. While duplicating the issue I had three applications open: SQL Server, Money, Task Manager. As the exception occurred, CPU: 2% Memory: 300MB of 1GB in use. Why an OutOfMemoryException, I'm only at 1/3?
Exception details below, but any help would be wonderful,
Todd
Exception details (only a little bit):
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.OutOfMemoryException: Out of memory.
at System.Drawing.Graphics.FromHdcInternal(IntPtr hdc)
at System.Windows.Forms.PaintEventArgs.get_Graphics()
at System.Windows.Forms.Control.PaintBackColor(PaintEventArgs e, Rectangle rectangle, Color backColor)
at System.Windows.Forms.Control.PaintBackground(PaintEventArgs e, Rectangle rectangle, Color backColor, Point scrollOffset)
at System.Windows.Forms.Control.PaintBackground(PaintEventArgs e, Rectangle rectangle)
at System.Windows.Forms.Control.OnPaintBackground(PaintEventArgs pevent)
at System.Windows.Forms.ScrollableControl.OnPaintBackground(PaintEventArgs e)
at System.Windows.Forms.Control.PaintWithErrorHandling(PaintEventArgs e, Int16 layer, Boolean disposeEventArgs)
at System.Windows.Forms.Control.OnPrint(PaintEventArgs e)
at System.Windows.Forms.Control.WmPrintClient(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.UserControl.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
Microsoft.SqlServer.Express.AppIDPackage
Assembly Version: 9.0.242.0
Win32 Version: 9.00.2040.00
CodeBase: file:///C:/Program%20Files/Microsoft%20SQL%20Server/90/Tools/Binn/VSShell/Common7/IDE/Microsoft.SqlServer.Express.AppIDPackage.DLL
----------------------------------------
Microsoft.SqlServer.Express.VSIntegration
Assembly Version: 9.0.242.0
Win32 Version: 9.00.2040.00
CodeBase: file:///C:/Program%20Files/Microsoft%20SQL%20Server/90/Tools/Binn/VSShell/Common7/IDE/Microsoft.SqlServer.Express.VSIntegration.DLL
----------------------------------------
Microsoft.VisualStudio.Shell.Interop
Assembly Version: 7.1.40304.0
Win32 Version: 7.0.4054
CodeBase: file:///C:/WINDOWS/assembly/GAC/Microsoft.VisualStudio.Shell.Interop/7.1.40304.0__b03f5f7f11d50a3a/Microsoft.VisualStudio.Shell.Interop.dll
----------------------------------------
Microsoft.VisualStudio.OLE.Interop
Assembly Version: 7.1.40304.0
Win32 Version: 7.0.4054
CodeBase: file:///C:/WINDOWS/assembly/GAC/Microsoft.VisualStudio.OLE.Interop/7.1.40304.0__b03f5f7f11d50a3a/Microsoft.VisualStudio.OLE.Interop.dll
----------------------------------------
ODBC is not supported as a data source in SQL Analysis Services 2005.
View 11 Replies View RelatedHello! Please show me how to calculate how many year of death?
I have tb1: fname, lname, date_of_death. Was not sure I can use the below statement. Thanks,
Select DATEDIFF(year, date_of_death, getdate()) AS no_of_days
FROM tb1
Hi guys,
I recently installed SQL 2005 SP2 on my Vista x64 system. However, when I launch the SQL Server Management Studio, I don't see any server names available, even though I have one called SQL2005 listed as running in the Configuration Manager.
Any idea what I did wrong?
When I type in the correct SQL Server name "SQL2005" and click connect I get this error:
TITLE: Connect to Server
------------------------------
Cannot connect to SQL2005.
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
Thanks in advance guys!!!
Hey guys, i finally connected to the db fine however for some reason i cannot pull the data. I was hoping somebody here might be able to help me. The code is below
Function MyQueryMethod() As System.Data.DataSet Dim connectionString As String = "server='xxxx'; user id='xxxx'; password='xxxxxx'; database='wel"& _ "sh_indiv'" Dim dbConnection As System.Data.IDbConnection = New System.Data.SqlClient.SqlConnection(connectionString)
Dim queryString As String = "SELECT [test12].[name], [test12].[grade] FROM [test12]" Dim dbCommand As System.Data.IDbCommand = New System.Data.SqlClient.SqlCommand dbCommand.CommandText = queryString dbCommand.Connection = dbConnection
Dim dataAdapter As System.Data.IDbDataAdapter = New System.Data.SqlClient.SqlDataAdapter dataAdapter.SelectCommand = dbCommand Dim dataSet As System.Data.DataSet = New System.Data.DataSet dataAdapter.Fill(dataSet)
Return dataSet End Function
im kinda new to programming with vb for asp.net pages so please bare with me.
Hi AllI am getting an access denied message when I launch the Virtual Serveradministration screen, however I can connect through the Virtual Machineremote connectivity without any problems. Please help, I upgraded my memoryand need to change setting though Virtual Server Adminitration screen.Is there a way around this issue!Thank you in advance,James--Message posted via http://www.sqlmonster.com
View 3 Replies View Relatedsql 7.0 is installed on an nt server machine and after that i installed a new hardware, rebooted the machine the i got the blue screen of death. what should i do, should i install sql server again or can i rebuild sql from the registry
thanks
thanveer
Is there an expression syntax that will do this? Does it have something to do with ROWNUMBER().
Any help is greatly appreciated! Thanks in advance! Probably an easy one for you gurus out there!
SQL Server 2014 BI edition.
select * from sys.dm_os_performance_counters returns the object names prefixed with "SQLServer:" (e.g. SQLServer:Databases)
It was expected as in other editions also. Issue is that when we try to crate "SQLServer Performance Condition alert", object names in "Object" list comes without the prefix "SQLServer:" (e.g. Databases). Please see the attached snapshots.
When starting SQL and also (not in addition to) another program the monitor flashes between a black and also a blue screen. On several occurances, I noticed the words "extracting file to ..." run donw the screen. However, after ten or twelve times of this flashing, the programs appear to run normally. Can anyone speak to a possible cause for this flashing?
V/r
Scott
Hi all,
View 5 Replies View RelatedWe have a 64-bit VM server running SQL Server 2005. The SQL Server on this particular VM server has 6 local instances installed. On the Management Studio logon screen I can type the full name of the local instance and connect to it, however if I press the drop down in the Server name field, choose Browse and select the Local Servers tab there is nothing listed under Database Engines.
Any idea why the 6 local instances don't show up under Database Engines? This is preventing me from installing a vendor application because their installer looks for local SQL Server instances on this server, but if SQL Server won't even show the local instances then the installer doesn't see them either.
Any help is greatly appreciated.
Thanks,
Craig
I have developed a custom report item that works fine in design and preview mode while in Visual Studio. I cannot get it to show up on my deployed reports. Here's what I have done so far:
1. Deployed the report using Visual Studio
2. updated the rsreportserver.config file with the following entry:
<ReportItems>
<ReportItem Name="PedigreeChart" Type="Uabr.Rap.PedigreeChart.PedigreeChartRenderer, Uabr.Rap.PedigreeChart" />
</ReportItems>
3. Updated the rssrvpolicy.config file with the following entry.
<CodeGroup
class="UnionCodeGroup"
version="1"
PermissionSetName="FullTrust"
Description="This code group grants Uabr.Rap.PedigreeChart.dll FUllTrust permission. ">
<IMembershipCondition
class="UrlMembershipCondition"
version="1"
Url="C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesReportServerinUabr.Rap.PedigreeChart.dll" />
</CodeGroup>
I've also tried using the StrongNameMembershipCondition with no better results.
4. The dll and its dependencies are copied to the bin directory of the report server.
5. When I load a report with this custom report item on it, the report loads fine with no errors or warnings in the log file (even with verbose tracing). The area where the custom item should be is just white. It's almost like Reporting Services isn't registering the item correctly.
This is particularly frustrating because the report works fine in Visual Studio - apparently I configured that correctly. Any suggestions would be greatly appreciated. I'm stumped.
Hello,I am looking for help with the following situation.I have created a simple call tracking system that is integratedwith our accounting / warehousing program in the company. The calltracking system uses ASP 3.0 and MSSQL 2000 sitting on an Intranet webserver. All appears to be working well with the software. I amtrying to create a search screen to search through the calls based ondifferent criteria.I have an ASP script that generates a SELECT statement based onthe selected criteria but this is sent off to the SQL server as thestatement. I want to use a stored procedure to speed up the process.Is it possible to create a stored procedure for this search even whenthe WHERE clause and criteria keeps changing?TIA
View 3 Replies View RelatedHi all,
I have a simple question about RS.
I need to show all my reports in full screen mode but I don't find any properties in report.
I read in some threads to use ToolBar options but toolbar show or hide print, refresh, etc. but I want to hide the top bar because I don't want show search box or navigation bar!!!
Thanks for all your help.
Well im trying to install some software on someone's cpu. I dont know his password, and he has forgotten. How do I get pass the login screen? and assign a new name and password. :confused:
View 2 Replies View RelatedHaiIs it possiable to close the current connection screen in the queryanalyser , not to close the query analyser.With ThanksRaghu
View 3 Replies View RelatedI have created a report, and want to now deploy it to the Report Server. Each time I try to do that, I get a Reporting Services Log In screen. I have no idea what to input, having tried my windows authentication and sa account without sucess. Is there something else that I need to set up so I can deploy my reports? Thanks in advance!
View 1 Replies View RelatedI have had this issue just pop up. I have local users who can connect fine, but my users that require connection by VPN cannot connect. I get the server not available or access denied error. I did confirm that the VPN'ers are connected to the network correctly and can see that their shares and mappings are correct. Any ideas? Thanking you all in advance!!
View 6 Replies View Relatedeverything is ok.. the connection is on..the page can be loaded... no error....
BUT the data from the database cannot be retrieved... as in.. it just didnt load on screen...
i dont know whats wrong... i have follow all the steps show on a book.. can anyone pls help me?? thks
does anyone know of easy to use tools to design input screens to access sql version 7 databases
View 1 Replies View RelatedI have a screen set up in another software package which accepts
2 values on a form -
'Number1' and 'Number2'
I need to check that at least a value is entered in one or both ...
If both values are 0 (set on dispaly of the form )then I need
to throw an error message to that effect on screen ....
(The Sql script is triggered after the form data has been entered)
Can anyone help me with the SQL script please to check the values ???
SQL 2000 SP3================================================In reviewing this screen, I have SPIDS > 100 that have a status ofsleeping, command = AWAITING COMMAND and login/batch dates that areweeks old ... Shouldn't this list be more recent activity only ?Thanks,Craig
View 1 Replies View RelatedSo in order for print preview to work, one has to change the background of all items on the page to white?
Is that a bug that is going to be fixed soon (along with running out of memory when you print a big report)?
The "View Report" button is relatively positioned so when the report content is wider than the screen size, it pushes it to the right such that the users have to scrool right to click on it again. Is there a way of setting the "View Report" button to a fixed position to eliminate this?