Body Values In Header And Header Values In Body
May 23, 2007
Hi,
I want to display a value from db in the header section. I have read a couple of information that I should place the value in a in-visible text field an reference it in the header with the ReportItems. This works great with the first page but on the second page the header information are empty (I think because the Textfield is on Page 1 not Page 2)... So is there a way to accomplish that for all pages? Not only the first page....
My second one, hope you don't mind that I post it in the same thread, is:
My Report needs to display the total size of pages in the body. I did not realy found anything useful where I can retrieve from the total size of pages of my reports....
thanks for any help
f.
View 3 Replies
ADVERTISEMENT
Jul 17, 2007
Hello every body,
I am facing a smal formatting issue. the issue i have 7 text boxes attached with each other in the header to show the week days ,i.e Sunday,Monday,Tuesday,Wednesday,Thursay,Friday and Saturday
In Body,i have a matrix which will extend to have 7 columns for the weekdays.
Every thing is fine,Except a small gap between header and footer where i want the 7 text boxes to act as column header names.
I tried with various options like removing the header and placing the text boxes in Body followed by the matrix. 2) placing the seven column headers in a dummy table and attaching that with matrix,
But i am unable to remove the gap between them. if any one of you had experienced the same problem or knows how to solve.it's really a great help
Thank you,
View 3 Replies
View Related
Mar 7, 2007
Is it possible to retrieve the value of a subreport's field or control from the parent report? I'm doing some grouping in the subreport and need to retrieve the group by's data value from the subreport.
Also, is there a way to repeat the main page's body when subreport has a page break? ie you page break on some thing in the subreport and need the body and head of the parent report to repeat on subsequent pages.
Thanks,
Garick
View 3 Replies
View Related
Jun 21, 2007
Here's my table so far in RS:
Facility Name | Claim | Fee | Value | Payment | Table Header
Wisconsin West | | | | | Group1 Header
| 2356 | $45 | $23 | | Group2 Header
| | | | $21 | Details
| | | | $7 | Details
| | | | $16 | Details
| 2357 | $85 | $47 | | Group2 Header
| | | | $21 | Details
| | | | $9 | Details
| | | | $13 | Details
| 2358 | $105 | $65 | | Group2 Header
| | | | $35 | Details
| | | | $12 | Details
| | | | $20 | Details
Facility Totals | 3 | $705 | $405 | $154 | Group1 Footer
*Notes = Table and Group2 footers are hidden and contains nothing. The last column is detailing what level each line is and not actually part of the table.
I believe my issue is with the SUM function and how or where to place it. In the Payment field, the SUM function is adding correctly, but for the Fee and Value field, the SUM fuction is adding as if every line item in the payment field had the fee and value amount, hence the huge amount.
How can make the Fee field total to $235 (45+85+105) instead of $705 (45+45+45+85+85+85+105+105+105); the same goes for the Value field of $135 (23+47+65) instead of $405 (23+23+23+47+47+47+65+65+65).
Below are the expressions I have in place at the Group1 Footer for the Claim, Fee, Value, and Payment fields respectively:
=CountDistinct(Fields!ClaimNumber.Value
=Sum(Fields!dAmount.Value)
=Sum(Fields!Value.Value)
=Sum(Fields!cAmount.Value)
I've tried playing with the scope, but to no avail. Any ideas or maybe I'm doing it all wrong? It's almost as if I need a SumDistinct if such a thing exist.
In the meantime, I'm doing some serious researching. Thanks!
View 1 Replies
View Related
Mar 13, 2008
Is it possible to get the reportdataset field values into parameters. dynamically when the report is generated.
Thanks.
View 1 Replies
View Related
Apr 25, 2008
I am using RDLC report with Microsoft visual studio 2005. In the first page of rdlc i have two text boxes and one table in body section. In the second and subsequent pages i want to repeat the data from textbox1 and textbox2 along with table data continuation of page1.
Currently the continuation of table data from page1 to page2 is working properly. But the textbox1 and textbox2 data also needs to be repeated in every pages.
I tried the following steps, but fails to work.
1. added two text boxes in header section and another two text boxes in Body section.
2. Assigns the dataset value to textboxes in body section.
(Ex: =first(Fields!Address.Value)
3. Assigns the textboxes value from Body section to the corresponding text boxes in header section.
(Ex : =first(ReportItems!textbox1.Value))
Result:
The header text box value displayed in the first page only and not repeated in the subsequent pages.
Expected:
Whatever assigned to the header section should be repeated in the subsequent pages. But only page number, date... is reflecting in other pages and not the text box values in header section.
Kindly give me the solution.
Thanks in advance.
View 7 Replies
View Related
Dec 26, 2006
Hi,
I have dropdown parameter with multi-values allowed.
In my report headed I want to show all the dropdown values that were checked by the user to run the report. But since there could be a couple of hundred values I want to show ALL when all the values are selected instead of listing them one by one.
How can I do that?
Thanks,
Igor
View 4 Replies
View Related
Dec 10, 2007
Hi ,
I am working on Sql server Reporting Services(Sql Server 2005),
i have designed a Report and deployed that report on Report Server, on this report i need to show the user selected values
in page header by using Parameters which i have already created in the Report.
There are 35 to 40 fields in the Front End(Asp.net2.0)
on passing all these values from front end Report is prompting for parameters which is not desired for my case even though i have made ShowParameterPrompts to false.
Thanks in advance
Srinivas Govada
View 1 Replies
View Related
Jul 18, 2007
I have code
Function GetDealCount(reportItems)
return iif(IsNothing(reportItems!txtDetailCountRows.Value), 0, reportItems!txtDetailCountRows.Value)
End Function
Function GetSumNotionalAmount(reportItems)
return iif(IsNothing(reportItems!txtDealSumNotionalAmount.Value), 0, reportItems!txtDealSumNotionalAmount.Value)
End Function
That I am calling from a textboxes in the page header
= Code.GetDealCount(ReportItems) & " Deal(s)"
also
= Parameters!BaseCurrency.Value + " " + Format(Code.GetSumNotionalAmount(ReportItems),"N2").ToString().Replace(",","'")
When I preview the report in VS.NET I get values showing.
When I deploy the report I just get #Error showing.
Also this report used to work fine in RS2000
Does anyone know the cause of this issue?
View 6 Replies
View Related
Mar 13, 2008
I need some help. I am writing a report in SSRS 2005 that I then need to export to Excel. When I put a report header I would expect the header to not display in the Excel spreadsheet until the Print Preview or the Print. The report footer works just fine I put some text in the footer, and it shows up in the footer. The header though, shows up as a row in the Excel spreadsheet that then causes columns to merge. How do I get the report header to act like a page header?
View 1 Replies
View Related
May 13, 2015
I am making a book-like report, I am using a report that has a header and calling a sub-report that has it's own header. However the sub-report header is not showing on the parent report. Parent report header is prevailing over the sub-report. Is it possible to have both headers displaying?
View 3 Replies
View Related
Nov 6, 2007
I have a report that I created and the report was working until I added some fields to a group footer row in a table.
My table has 5 group levels. I had information displaying in the 5th level header group and detail. It was working fine. Then I added some fields to the 4th level group footer. Now it displays only the Page header, Table header, and the 4th level group footer data.
What happened to the rest of the data?
All the cells and rows I want to display have the Visibility Hidden set to false. I tried removing the objects I added (to the 4th level group footer) and it still does not work. Is this a bug or did I set something that is hiding the data.
Thanks,
Fred
View 1 Replies
View Related
Nov 6, 2007
Hi Friends,
There is a one header in the report, when I publish and hit the report in IE(internet explor) the header appears fine on first page when I go to next page this header does not appear.
But in mozilla the header is visible on every page of the report. so it is working fine in mozilla.
I donot why it is happening?
Your help is highly appreciated.
Thanks
Novin
View 1 Replies
View Related
Oct 28, 1998
Anyone else get no body to msgs after 10/28?
Why admin peoples?
View 1 Replies
View Related
Feb 22, 2007
Hi,
can any body tell me what is wrong in my sql statement
SELECT title, price,
Budget = CASE price
WHEN price > 20.00 THEN 'Expensive'
WHEN price BETWEEN 10.00 AND 19.99 THEN 'Moderate'
WHEN price < 10.00 THEN 'Inexpensive'
ELSE 'Unknown'
END
FROM titles
it gives me this error
Msg 170, Level 15, State 1, Line 3
Line 3: Incorrect syntax near '>'.
but when i use somthing like that i will works fine
SELECT
Budget
i am using sql server 2000
View 2 Replies
View Related
May 31, 2004
can any body tell my why this page does´t uppdate into my sql
i get no error but it does´t uppdate the records :(
<%@ Import Namespace="System.Data" %>
<%@ Import Namespace="System.Data.SqlClient" %>
<html>
<head>
<title>Updating a Row of Data with Validation</title>
<style type="text/css">
#editPanel {
width:90%; padding:10; background:khaki;
border:thin outset}
#posted {
background:lightgreen; border:thin inset}
</style>
<script language="C#" runat="server">
/* *********** Data base config ************ */
string ServerName = "xxx"; // SQL server name
string Database = "xxx"; // SQL Database Name
string user = "xxx"; // SQL User name
string Pass = "xxx"; // SQL Password
/* *********** define DataBase Sql/Access data ************ */
string TheID;
protected void Page_Load ( object src, EventArgs e )
{
string ServerName = "xxx"; // SQL server name
string Database = "xxx"; // SQL Database Name
string user = "xxx"; // SQL User name
string Pass = "xxx"; // SQL Password
SqlConnection myConn = new SqlConnection("server=" + ServerName + ";database=" + Database + ";UID=" + user + ";PWD=" + Pass + ";");
SqlCommand myCmd = new SqlCommand ("SELECT * FROM cars ORDER BY MessageDate desc",myConn);
myCmd.Connection = myConn;
TheID = Request.QueryString [ "TheID" ] ;
if ( !IsPostBack )
{
if ( TheID == null )
{
bindGrid ( );
loadPanel.Visible = true;
editPanel.Visible = false;
postPanel.Visible = false;
}
else
{
getMessage ( Request.QueryString [ "TheID" ] );
loadPanel.Visible = false;
editPanel.Visible = true;
postPanel.Visible = false;
}
}
else
{
loadPanel.Visible = false;
editPanel.Visible = false;
postPanel.Visible = true;
}
}
public void bindGrid ( )
{
string ServerName = "xxx"; // SQL server name
string Database = "xxx"; // SQL Database Name
string user = "xxx"; // SQL User name
string Pass = "xxx"; // SQL Password
SqlConnection myConn = new SqlConnection("server=" + ServerName + ";database=" + Database + ";UID=" + user + ";PWD=" + Pass + ";");
SqlCommand myCmd = new SqlCommand ("SELECT TOP 10 * FROM cars",myConn);
SqlDataReader rdr;
myCmd.CommandText = "SELECT TOP 10 * FROM cars";
myConn.Open();
rdr = myCmd.ExecuteReader ( );
myGrid.DataSource = rdr;
myGrid.DataBind ( );
rdr.Close();
myConn.Close();
/*
myCmd.CommandText = "SELECT * FROM cars";
myConn.Open();
myGrid.DataSource=myCmd.ExecuteReader ( );
myGrid.DataSource = myCmd.ExecuteReader ( CommandBehavior.CloseConnection );
myGrid.DataBind ( );
*/
}
public void getMessage ( String TheID )
{
string ServerName = "xxx"; // SQL server name
string Database = "xxx"; // SQL Database Name
string user = "xxx"; // SQL User name
string Pass = "xxx"; // SQL Password
SqlConnection myConn = new SqlConnection("server=" + ServerName + ";database=" + Database + ";UID=" + user + ";PWD=" + Pass + ";");
SqlCommand myCmd = new SqlCommand ( );
SqlDataAdapter myAdapter = new SqlDataAdapter ("select * from cars where ID=" + TheID, myConn );
DataTable msgDetails = new DataTable ( );
myAdapter.Fill ( msgDetails );
DataRowView myRow = msgDetails.DefaultView [ 0 ] ;
msgFastnumer.Value = myRow [ "Fastnumer" ].ToString ( );
msgTegund.Value = myRow [ "Tegund" ].ToString ( );
editPanel.DataBind ( );
}
public void updateMessage ( object src, EventArgs e )
{
string ServerName = "xxx"; // SQL server name
string Database = "xxx"; // SQL Database Name
string user = "xxx"; // SQL User name
string Pass = "xxx"; // SQL Password
SqlConnection myConn = new SqlConnection("server=" + ServerName + ";database=" + Database + ";UID=" + user + ";PWD=" + Pass + ";");
SqlCommand myCmd = new SqlCommand ( );
myCmd.Connection = myConn;
SqlDataAdapter myAdapter = new SqlDataAdapter ("select * from cars where ID=" + TheID, myConn );
DataTable msgDetails = new DataTable ( );
myAdapter.Fill ( msgDetails );
DataRowView myRow = msgDetails.DefaultView [ 0 ] ;
SqlDataReader rdr;
if ( Page.IsValid )
{
myCmd.CommandText = "UPDATE cars SET Fastnumer=@Fastnumer, Tegund=@Tegund where id=" + TheID;
msgFastnumer.Value = myRow [ "Fastnumer" ].ToString ( );
msgTegund.Value = myRow [ "Tegund" ].ToString ( );
myCmd.Parameters.Add ( "@Fastnumer", SqlDbType.NVarChar ).Value = msgFastnumer.Value;
myCmd.Parameters.Add ( "@Tegund", SqlDbType.NVarChar ).Value = msgTegund.Value;
myConn.Open ( );
rdr = myCmd.ExecuteReader ( );
myGrid.DataSource = rdr;
myGrid.DataBind ( );
rdr.Close();
myConn.Close ( );
}
bindPostPanel ( TheID );
}
public void bindPostPanel ( String TheID )
{
string ServerName = "xxx"; // SQL server name
string Database = "xxx"; // SQL Database Name
string user = "xxx"; // SQL User name
string Pass = "xxx"; // SQL Password
SqlConnection myConn = new SqlConnection("server=" + ServerName + ";database=" + Database + ";UID=" + user + ";PWD=" + Pass + ";");
SqlCommand myCmd = new SqlCommand ( );
SqlDataReader rdr;
myCmd.CommandText = "SELECT * FROM cars WHERE Id='" + TheID + "'";
myCmd.Connection = myConn;
myConn.Open();
rdr = myCmd.ExecuteReader ( CommandBehavior.SingleRow );
listDetails.DataSource = rdr;
listDetails.DataBind ( );
rdr.Close();
myConn.Close();
/*
myConn.Open ( );
listDetails.DataSource = myCmd.ExecuteReader ( CommandBehavior.SingleRow );
listDetails.DataBind ( );
myConn.Dispose ( );
*/
}
</script>
</head>
<body>
<div class="header"><h3>ADO.NET Primer:
<span class="hilite">Editing an Existing Record</span></h3>
</div>
<hr size="1" width="90%">
<br>
<center>
<asp:panel id="loadPanel" runat="server">
<h5>Select a Record to Edit</h5>
<asp:datagrid id="myGrid" runat="server" width="90%" cellpadding="5" gridlines="vertical" bordercolor="black"
borderwidth="1" font-size="8pt" backcolor="ghostwhite" alternatingitemstyle-backcolor="lightgray"
autogeneratecolumns="false">
<headerstyle backcolor="darkslategray" forecolor="khaki" height="25" font-bold />
<columns>
<asp:boundcolumn headertext="Date" datafield="Innsett" dataformatstring="{0:d}" />
<asp:hyperlinkcolumn headertext="Fastnumer" datanavigateurlfield="id" datanavigateurlformatstring="aspxtest.aspx?TheID={0}"
datatextfield="Fastnumer" />
<asp:boundcolumn headertext="Tegund" datafield="Tegund" />
</columns>
</asp:datagrid>
<p align="center">Back to top</p>
</asp:panel>
<asp:panel id="editPanel" runat="server">
<h5>To save changes to the database, press Update.</h5>
<form runat="server">
<input type="hidden" id='msgDate' runat="server">
<table width="85%" cellspacing="1" cellpadding="3" border="0">
<col width="40%" align="right">
<col width="60%">
<tr>
<td>Fastnumer:</td>
<td><input id="msgFastnumer" runat="server">
<asp:requiredfieldvalidator runat="server" controltovalidate="msgFastnumer" errormessage="Sender's name cannot be blank. "
display="none" /></td>
</tr>
<tr>
<td>Your email address:</td>
<td><input id="msgEmail" runat="server">
<asp:regularexpressionvalidator runat="server" controltovalidate="msgEmail" validationexpression="^[w-]+@[w-]+.(com|net|org|edu|mil)$"
errormessage="Please enter a valid e-mail address. " display="none" /></td>
</tr>
<tr>
<td>Tegund:</td>
<td><input id="msgTegund" runat="server"></td>
</tr>
<tr>
<td>Your message:</td>
<td><textarea id="msgBody" rows="5" cols="35" runat="server"></textarea></td>
</tr>
</table>
<p>
<input type="submit" value="Update" runat="server" onServerClick="updateMessage">
<input type="reset" value="Cancel" onClick="self.location.replace ( 'aspxtest.aspx' ) "></p>
<asp:validationsummary runat="server" displaymode="SingleParagraph" showmessagebox="true" showsummary="false" />
</form>
</asp:panel>
<asp:panel id="postPanel" runat="server">
<h5>Thank you for editing your comments. This record has been updated.</h5>
<asp:datalist id="listDetails" width="85%" runat="server">
<itemtemplate>
<table id="posted" width="100%" cellspacing="1" cellpadding="5" border="0">
<col width="35%" align="right">
<tr>
<td>Date:</td>
<td><%# DataBinder.Eval ( Container.DataItem, "Innsett", "{0:d}" ) %></td>
</tr>
<tr>
<td>Name:</td>
<td><%# ( ( IDataRecord ) Container.DataItem ) [ "Fastnumer" ] %></td>
</tr>
<tr>
<td>Tegund:</td>
<td><%# ( ( IDataRecord ) Container.DataItem ) [ "Tegund" ] %></td>
</tr>
</table>
</itemtemplate>
</asp:datalist>
<p>
Back to Edit View
Select Another Record
</p>
</asp:panel>
</center>
<br>
<hr size="1" width="90%">
</body>
</html>
View 6 Replies
View Related
Feb 6, 2008
Hello,
I was modifying some standard reports of one planning program, by downloading .rdl file from report server and creating a new report project. I have done so many times.
Last weak in one of those new reports only header of the report was seen in the report server as I thought I had made some kind of mistake tried to look for it, and after some time the problem fixed itself and I blamed everything on one mixed up connection between the tables in the report, because after removing it the problem fixed itself, but now I think that was just a coincidence.
This weak after working fine for about a weak, 6 reports appeared as only headers and footers, they worked fine yesterday and no changes were made to the reports, but in the morning only the header is seen.
The reports that are affected are the 4 new ones, and 2 original ones, they are all dealing with the same date just different grouping and sorting.
Does anyone know how to fix this problem?
Darius
View 1 Replies
View Related
Aug 2, 2007
how to get page number in body of report
View 9 Replies
View Related
Oct 7, 2015
I have a sql query
create table temp
(
date1 datetime,
category varchar(3),
amount money
[code]....
In above format:15-10 means Oct 15, 15-09 means Sept 15I am getting issues while formatting this in SSRS.I need SSRS table headers to be dynamic. I need that it should be according to the sql table header...The table header should change according to the sql query
View 2 Replies
View Related
Nov 12, 2004
My @subject in an xp_sendmail job is appearing in the email subject where it's supposed to, but also as the first line of the body. Does anyone know of a way to disable this behavior?
View 3 Replies
View Related
Oct 18, 2013
I have created a .bat file for my sqlcmd
my sqlcmd includes a .sql file that builds up my email with a HTML body.
Is it possible to insert a variable (@customername) into the HTML body?
I am already using @maillist and select statement to create my customer email address's.
View 5 Replies
View Related
Nov 28, 2007
I'm generating emails using sp_send_dbmail. Everything works perfectly except for one thing. In the body of the email I need to show a link to a web page (eg http://myweb/login.aspx).
The problem is that the received email shows the "link" as plain text, ie it is not a clickable link. I've tried adding char(13) (and char(10) and both) after the link text but that doesn't help.
Is there a way to make the link text a real link when received by Outlook? (All recipients will be using Outlook if that helps).
Thanks,
John
View 6 Replies
View Related
Oct 5, 2006
I have been trying to set up reports with a background image. The background displays correctly on the preview tab in Visual Studio, but is not visible when deployed to the report server and rendered in Internet Explorer.
However, if the report is printed, or exported to PDF or Excel, the background displays correctly.
It does not seem to make any difference if the image is external or embedded. Also, the problem only seems to affect the Body properties; a background image attached to a table, for example, seems to display correctly.
Has anybody else seen this behavior? I have not done extensive testing, but every report that I have tried seems to have the same problem. Is there a setting someplace that I am missing, or is this perhaps a bug in IE?
View 3 Replies
View Related
May 3, 2007
Hi, all experts here,
Thanks a lot for your kind attention.
I am on the layout page, and click on the body, going to the body property dialogue, there is a size property there, I changed its width and height, but it is not changed at all? I mean once I save it, it is back to its orginal size? Why is that? Any advices for that?
Hope my question is clear.
Thanks a lot in advance for your help.
And I am looking forward to hearing from you shortly.
With best regards,
Yours sincerely,
View 1 Replies
View Related
Oct 10, 2007
I have a lengthy report and a summary viewof this report. I'dlike for the summary view to be sent out in a subscription as the message body and have the detailed report be sent out as a PDF attachment. I know you can't do this in the default subscription UI, but I was wondering if there was a programmatic way to make this happen?
Thanks,
-p
View 1 Replies
View Related
Nov 20, 2007
The gap between my report heading and the body seems unusually large, is there a way to shrink this down from what appears to be a default of over an inch? I dont see a way to slide the body upward in layout mode.
View 1 Replies
View Related
Sep 30, 2007
Hi,
I have requirement to generate a Report of having more than 30 pages. I am getting an error when I am adding an object to the body. The maximum height of the body is 160 in but my requirement is more than 160in.
I do not want to use Linked Reports, because my requirement is Report should be print on the single click.
Any help?
Regards,
Subhash
View 1 Replies
View Related
Jan 16, 2008
Tried to customize footer content by setting variable in code using VB setter/getter methods in the body of the report. Successfully able to change footer content by changing variable value via setter method in the header, but not from the body. I have report content in two table in the body of the report. I would like to change the footer when second table is displayed. Is this even possible?
View 4 Replies
View Related
Oct 18, 2007
hello,
need help with a simple trigger i have been working on. the trigger automatically sends me an email out when a record is inserted, how ever i can't seem to get the row column data into the email. The part i do not understand is that I get the row column data information in the email if I update the row.
This is for 2005 SQL
Any direction would be greatly appreaciated
OneIDesigned
View 5 Replies
View Related
Apr 4, 2008
Hi, I need help please.
I want to send an HTML Email
I have an Htm file that i want to use as my email body on Send Mail Task
MessageSourceType: File Connection
MessageSource: Email.htm
It sends the email with the file in the body but not in HTML format
it outputs the HTML tags + data
eg: <span style="font-size:9.0pt;">Period: 2008.04</span>
I used the same file in a DTS package & that works fine.
Please Assist!
Regards
View 2 Replies
View Related
Oct 27, 2013
I need to set a trigger so that an email is generated when a row is inserted into the ABC_DB_OnlineFormsConfirm table. The message will include data not only from that table, but from a related table called ABC_DB_OnlineForms. The common field between the two is FormID. This is related to an online account application process where the user has the option of completing it in one session, or saving it and coming back at a later time. Once the user has completed the first screen and clicks continue, a record is written to ABC_DB_OnlineForms. At the very end, when he clicks “Save and Complete”, a row is written to the ABC_DB_OnlineForms table. I would like the body of the email to include three separate lines, as follows. The first two pieces of data come from the OnlineForms table and the third from OnlineFormsConfirm. The field names are userid, IRSBackup and ConfirmationCode.
UserID:
Subject to IRS Backup Withholding?:
Confirmation Code:
What I have below results in an email body that contains the confirmation code all by itself. If I switch @body=@MessageBody to @body=@UserID or @body=@Backup, it will report the correct single piece of data, but I have no idea how to get all three pieces at once as separate lines including the leading descriptor (UserID:, Confirmation Code, etc.).
CREATE TRIGGER SendEmail
ON [ABC].[dbo].[ABC_DB_OnlineFormsConfirm]
AFTER INSERT
AS
Begin
Declare @MessageBody varchar(100)
[code]...
View 7 Replies
View Related
Jul 23, 2005
I currently have a web form posting back to a SQL table using a StoredProcedure. Part of this SP is that it pulls data from another tableand inserts a new row into the registration table.I want to have a trigger on the registration table that will fire whenthe row is inserted which will use the sp_send_cdosysmail sproc to sendan e-mail to the user.However, I want to be able to include the value of one of the fieldswithin the BODY of the message. I can't find a way to includeparameters/variables within the Body of a message usingsp_send_cdosysmail and it's driving me nuts.Here's what I have in a sproc (not a trigger) that executessp_send_cdosysmail...I currently pass a parameter for the "To" e-mailaddress and that works fine._________________________________________________EXEC sp_send_cdosysmail'fromemailaddress@testcompany.com',@stremail, <--This is the Parameter passed for the "To" e-mail addy-->'Test Subject','Test Body,Additional TextAdditional Text<--THIS IS WHERE I WANT TO PUT THE PARAMETER-->Additional TextAdditional Text'__________________________________________________ _Is there any way to do this?The sp_send_cdosysmail I used is the standard MS one..Here it is forreference:Thanks for any help offered!ElliotCREATE PROCEDURE [dbo].[sp_send_cdosysmail]@From varchar(100) ,@To varchar(100) ,@Subject varchar(100)=" ",@Body varchar(4000)/************************************************** *******************This stored procedure takes the parameters and sends an e-mail.All the mail configurations are hard-coded in the stored procedure.Comments are added to the stored procedure where necessary.References to the CDOSYS objects are at the following MSDN Web site:http://msdn.microsoft.com/library/d...s_messaging.asp************************************************** *********************/ASDeclare @iMsg intDeclare @hr intDeclare @source varchar(255)Declare @description varchar(500)Declare @output varchar(1000)--************* Create the CDO.Message Object ************************EXEC @hr = sp_OACreate 'CDO.Message', @iMsg OUT--***************Configuring the Message Object ******************-- This is to configure a remote SMTP server.--http://msdn.microsoft.com/library/d...n_sendusing.aspEXEC @hr = sp_OASetProperty @iMsg,'Configuration.fields("http://schemas.microsoft.com/cdo/configuration/sendusing").Value','1'-- This is to configure the Server Name or IP address.-- Replace MailServerName by the name or IP of your SMTP Server.EXEC @hr = sp_OASetProperty @iMsg,'Configuration.fields("http://schemas.microsoft.com/cdo/configuration/smtpserver").Value','SMTPServer'-- Save the configurations to the message object.EXEC @hr = sp_OAMethod @iMsg, 'Configuration.Fields.Update', null-- Set the e-mail parameters.EXEC @hr = sp_OASetProperty @iMsg, 'To', @ToEXEC @hr = sp_OASetProperty @iMsg, 'From', @FromEXEC @hr = sp_OASetProperty @iMsg, 'Subject', @Subject-- If you are using HTML e-mail, use 'HTMLBody' instead of 'TextBody'.EXEC @hr = sp_OASetProperty @iMsg, 'TextBody', @BodyEXEC @hr = sp_OAMethod @iMsg, 'Send', NULL-- Sample error handling.IF @hr <>0select @hrBEGINEXEC @hr = sp_OAGetErrorInfo NULL, @source OUT, @description OUTIF @hr = 0BEGINSELECT @output = ' Source: ' + @sourcePRINT @outputSELECT @output = ' Description: ' + @descriptionPRINT @outputENDELSEBEGINPRINT ' sp_OAGetErrorInfo failed.'RETURNENDEND-- Do some error handling after each step if you have to.-- Clean up the objects created.EXEC @hr = sp_OADestroy @iMsgGO
View 2 Replies
View Related
Feb 2, 2006
Hi
I have a report of 8.5"(W) by 11"(H).The header and footer size are fixed.
The header size is 4.75 in and footer size is 2.375in.
In the report body I have a table where the data is dynamic.
The problem is when the data is small i mean like 2 or 3 columns it doesnt touch the footer .
If we have more than 10 columns or so it goes to the next page and even then it doesnt touch the footer beacuse the data stops there.
If we have like 4 columns or so in the table then it touches the footer.
I tried to replace the table with the list but I got the same problem there also.
I tried to place the table in a rectangle and it has the same problem.
I want the table to touch the footer no matter how much the data is .
Is there any work around for this problem?
I really appreciate your help and time
Thanks
Hobbs
View 3 Replies
View Related
