Bookmark In Code Not Working.
Feb 13, 2007
I have a report in reporting services that has a bookmark value asigned to each row. In the following Page_Load event for the page, I'm getting the following error on the ReportViewer1.JumpToBookmark("6") statement:
"An exception of type 'System.InvalidOperationException' occurred in Microsoft.ReportViewer.WebForms.dll but was not handled in user code
Additional information: Some parameters or credentials have not been specified"
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
If Not IsPostBack Then
Dim strReport1 As String = "/ReportDirectory/CurrentWeekSales"
ReportViewer1.ServerReport.ReportServerUrl = New System.Uri(CStr(Session.Item("ReportServer")))
ReportViewer1.ServerReport.ReportPath = strReport1
ReportViewer1.ServerReport.Timeout = 500000
Do While ReportViewer1.ServerReport.IsDrillthroughReport
ReportViewer1.PerformBack()
Loop
Dim RptParameters1 As ReportParameter() = New ReportParameter(0) {}
RptParameters1(0) = New ReportParameter("EBO_EmpKey", CStr(Session.Item("UserKey")))
ReportViewer1.ServerReport.SetParameters(RptParameters1)
ReportViewer1.ServerReport.Refresh()
ReportViewer1.JumpToBookmark("6")
End If
End Sub
What am I missing?
Thanks
View 1 Replies
ADVERTISEMENT
Oct 1, 2007
Hello Everyone,
I have a custom assembly which has a strong name, and I have deployed it in the GAC. I have also raised its trust level to Full Trust.
I have added a reference to this assembly from report properties.
when I try to use it, I get the error
[BC30451] name 'myUtil' is not declared.
Here myUtil is the instance name of the my class. (All methods are instance methods in my class and there are no static methods).
I found many people facing this issue, and the solution involved copying of the assembly in some privateassemblies folder. However that should not be the case with me as I have the assembly in the GAC.
View 5 Replies
View Related
Mar 7, 2007
Hi, The attached code gives the error "One or more errors occured during processing of command"
What I am trying to do is simply copy a table ("inventry") to a new table name ("bob"). Eventually I want to create a new table based on a filter (as i would using the SELECT INTO command in sql)
Note that this is for a foxpro table
OleDbConnection conn = new OleDbConnection();
conn.ConnectionString = "Provider=VFPOLEDB.1;Data Source=C:\test\Inventry.dbf;Password=''";
conn.Open();
OleDbCommand cmd = new OleDbCommand();
cmd.CommandText = "USE Inventry";
cmd.ExecuteNonQuery();
cmd.CommandText = "COPY TO bob";
cmd.ExecuteNonQuery(); // ERRORS HERE!!!!
ive tried a similar thing in VB and get the same error:
Dim cn As New ADODB.Connection
cn.ConnectionString = "Provider=VFPOLEDB.1;Collating Sequence=MACHINE;Data Source=C: est"
cn.Open
cn.Execute ("set null off")
cn.Execute ("USE C: estInventry.dbf")
cn.Execute ("COPY TO C: estBOB WITH CDX") // ERRORS HERE!!!
Any help would be greatley appreciated
Regards,
Shaun
View 5 Replies
View Related
Feb 23, 2007
Hi All,
Are there samples for working with Inegration Service ?
As I see in shipped samples are C# and VB only.
Particulary I need a C++ code for "Enumerating Available Packages Programmatically"
Thanks a lot.
Sergiy
View 3 Replies
View Related
Jan 26, 2008
Hello i constructed the following query in SQL management studio and it runs fine, exactly how i want it to. However when i run it in my code behind i get the error: 'Too many characters in character literal'
I desperatly need to use this query exactly how it displays in the mangement tool - why wont it work the same in my code behind?
(I am using c# in my code behind and binding the results of the query to a gridview)
Regards
"SELECT DISTINCT (dbo.AuthorList(publicationID))+ ';' + ISNULL(' Editor: '+Publication.editor, '')+ '' + ISNULL(' "'+Publication.title+'"', '')+ '' + ISNULL(' Book: "'+Publication.booktitle+'"', '')+ '' + ISNULL(' '+Publication.type, '')+ '' + ISNULL(' '+Publication.journal, '')+ '' + ISNULL(' Series: '+Publication.series+'.', '')+ '' + ISNULL(' '+Publication.school, '')+ '' + ISNULL(' '+Publication.institution, '')+ '' + ISNULL(' '+Publication.organisation, '')+ '' + ISNULL(' '+Publication.month, '')+ '' + ISNULL(' ('+convert(nvarchar, Publication.year)+')', '')+ '' + ISNULL(' '+Publication.publisher, '')+ '' + ISNULL(' '+Publication.address+'.', '')+ '' + ISNULL(' '+Publication.howpublished, '')+ '' + ISNULL(' Ed: '+convert(nvarchar, Publication.edition)+'.', '')+ '' + ISNULL(' '+Publication.note, '')+ '' + ISNULL(' Vol:'+Publication.volume+'.', '')+ '' + ISNULL(' No:'+Publication.number+'.', '')+ '' + ISNULL(' Pages:'+Publication.pages+'.', '')+ '' + ISNULL(' Chapter:'+Publication.chapter+'.', '') AS SingleColumn, Publication.publicationID FROM Publication;"
View 1 Replies
View Related
Apr 13, 2008
This is my first attempt at a loop in a stored procedure, and it is not working, but the rest of the sp works fine. Could anyone please provide me with some feedback. I am not sure if I need to execute the loop first or all the sp at once ? Thanks so much.CREATE PROCEDURE Table_1TT_1T (@PartNo varchar(20), @Wkorder varchar(10), @Setup datetime, @Line smallint, @TT integer, @Tester smallint, @LT1 integer, @LT2 integer, @LT3 integer, @LT4 integer, @LT5 integer, @LT6 integer, @LT7 integer, @LT8 integer, @LT9 integer, @LT10 integer, @LT11 integer, @LT12 integer, @LT13 integer, @LT14 integer, @LT15 integer, @LT16 integer, @LT17 integer, @LT18 integer, @LT19 integer, @LT20 integer, @LT21 integer, @LT22 integer, @LT23 integer, @LT24 integer, @LT25 integer, @LT26 integer, @LT27 integer, @LT28 integer, @LT29 integer, @LT30 integer, @LT31 integer, @LT32 integer, @LT33 integer, @LT34 integer, @LT35 integer, @LT36 integer, @UnitFound integer OUT, @parameters_LamType varchar(50) OUT, @parameters_Shunt real OUT, @parameters_ShuType varchar(50) OUT, @parameters_Stack real OUT, @parameters_Steel varchar(50) OUT, @Partno11 varchar(20) OUT, @Wkorder11 varchar(10) OUT, @Partno12 varchar(20) OUT, @Wkorder12 varchar(10) OUT, @Partno24 varchar(20) OUT, @Wkorder24 varchar(10) OUT, @Partno29 varchar(20) OUT, @Wkorder29 varchar(10) OUT, @Partno34 varchar(20) OUT, @Wkorder34 varchar(10) OUT, --@DL1 integer OUT, --@DL2 integer OUT, --@DL3 integer OUT, --@DL4 integer OUT, --@DL5 integer OUT, --@DL6 integer OUT, --@DL7 integer OUT, --@DL8 integer OUT, --@DL9 integer OUT, --@DL10 integer OUT, @DL11 integer OUT, @DL12 integer OUT, --@DL13 integer OUT, --@DL14 integer OUT, --@DL15 integer OUT, --@DL16 integer OUT, --@DL17 integer OUT, --@DL18 integer OUT, --@DL19 integer OUT, --@DL20 integer OUT, --@DL21 integer OUT, --@DL22 integer OUT, --@DL23 integer OUT, @DL24 integer OUT, --@DL25 integer OUT, --@DL26 integer OUT, --@DL27 integer OUT, --@DL28 integer OUT, @DL29 integer OUT, --@DL30 integer OUT, --@DL31 integer OUT, --@DL32 integer OUT, --@DL33 integer OUT, @DL34 integer OUT) --@DL35 integer OUT, --@DL36 integer OUT)ASSET @Tester = 1WHILE @Tester < 36 BEGIN Set @Line = (Select Line from dbo.location where Tester = @Tester) IF @Line = 453 BEGIN If @Tester = 1 BEGIN SET @LT1 = 453 END If @Tester = 2 BEGIN SET @LT2 = 453 END If @Tester = 3 BEGIN SET @LT3 = 453 END If @Tester = 4 BEGIN SET @LT4 = 453 END If @Tester = 5 BEGIN SET @LT5 = 453 END If @Tester = 6 BEGIN SET @LT6 = 453 END If @Tester = 7 BEGIN SET @LT7 = 453 END If @Tester = 8 BEGIN SET @LT8 = 453 END If @Tester = 9 BEGIN SET @LT9 = 453 END If @Tester = 10 BEGIN SET @LT10 = 453 END If @Tester = 11 BEGIN SET @LT11 = 453 END If @Tester = 12 BEGIN SET @LT12 = 453 END If @Tester = 13 BEGIN SET @LT13 = 453 END If @Tester = 14 BEGIN SET @LT14 = 453 END If @Tester = 15 BEGIN SET @LT15 = 453 END If @Tester = 16 BEGIN SET @LT16 = 453 END If @Tester = 17 BEGIN SET @LT17 = 453 END If @Tester = 18 BEGIN SET @LT18 = 453 END If @Tester = 19 BEGIN SET @LT19 = 453 END If @Tester = 20 BEGIN SET @LT20 = 453 END If @Tester = 21 BEGIN SET @LT21 = 453 END If @Tester = 22 BEGIN SET @LT22 = 453 END If @Tester = 23 BEGIN SET @LT23 = 453 END If @Tester = 24 BEGIN SET @LT24 = 453 END If @Tester = 25 BEGIN SET @LT25 = 453 END If @Tester = 26 BEGIN SET @LT26 = 453 END If @Tester = 27 BEGIN SET @LT27 = 453 END If @Tester = 28 BEGIN SET @LT28 = 453 END If @Tester = 29 BEGIN SET @LT29 = 453 END If @Tester = 30 BEGIN SET @LT30 = 453 END If @Tester = 31 BEGIN SET @LT31 = 453 END If @Tester = 32 BEGIN SET @LT32 = 453 END If @Tester = 33 BEGIN SET @LT33 = 453 END If @Tester = 34 BEGIN SET @LT34 = 453 END If @Tester = 35 BEGIN SET @LT35 = 453 END END SET @Tester = @Tester + 1 ENDSELECT @parameters_LAMTYPE = LAMTYPE, @parameters_SHUNT = SHUNT, @parameters_SHUTYPE = SHUTYPE, @parameters_STACK = STACK, @parameters_STEEL = STEEL FROM DBO.PARAMETERS A INNER JOIN .DBO.XREF B ON A.PARTNO = B.XREF WHERE B.PARTNO = @PARTNO SET @UnitFound = @@rowcountIF @UnitFound = 0 BEGIN SELECT @parameters_LAMTYPE = LAMTYPE, @parameters_SHUNT = SHUNT, @parameters_SHUTYPE = SHUTYPE, @parameters_STACK = STACK, @parameters_STEEL = STEEL FROM DBO.PARAMETERS WHERE PARTNO = @PARTNO SET @UnitFound = @@rowcount END --IF @LT1 = @Line BEGIN SET @DL1 = 1 END --IF @LT2 = @Line BEGIN SET @DL2 = 1 END --IF @LT3 = @Line BEGIN SET @DL3 = 1 END --IF @LT4 = @Line BEGIN SET @DL4 = 1 END --IF @LT5 = @Line BEGIN SET @DL5 = 1 END --IF @LT6 = @Line BEGIN SET @DL6 = 1 END --IF @LT7 = @Line BEGIN SET @DL7 = 1 END --IF @LT8 = @Line BEGIN SET @DL8 = 1 END --IF @LT9 = @Line BEGIN SET @DL9 = 1 END --IF @LT10 = @Line BEGIN SET @DL10 = 1 END IF @LT11 = 453 BEGIN SET @Partno11 = @Partno SET @Wkorder11 = @Wkorder SET @DL11 = 1 END --IF @LT11 = @Line BEGIN SET @DL11 = 1 END IF @LT12 = 453 BEGIN SET @Partno12 = @Partno SET @Wkorder12 = @Wkorder SET @DL12 = 1 END --IF @LT13 = @Line BEGIN SET @DL13 = 1 END --IF @LT14 = @Line BEGIN SET @DL14 = 1 END --IF @LT15 = @Line BEGIN SET @DL15 = 1 END --IF @LT16 = @Line BEGIN SET @DL16 = 1 END --IF @LT17 = @Line BEGIN SET @DL17 = 1 END --IF @LT18 = @Line BEGIN SET @DL18 = 1 END --IF @LT19 = @Line BEGIN SET @DL19 = 1 END --IF @LT20 = @Line BEGIN SET @DL20 = 1 END --IF @LT21 = @Line BEGIN SET @DL21 = 1 END --IF @LT22 = @Line BEGIN SET @DL22 = 1 END --IF @LT23 = @Line BEGIN SET @DL23 = 1 END IF @LT24 = 453 BEGIN SET @Partno24 = @Partno SET @Wkorder24 = @Wkorder SET @DL24 = 1 END --IF @LT25 = @Line BEGIN SET @DL25 = 1 END --IF @LT26 = @Line BEGIN SET @DL26 = 1 END --IF @LT27 = @Line BEGIN SET @DL27 = 1 END --IF @LT28 = @Line BEGIN SET @DL28 = 1 END IF @LT29 = 453 BEGIN SET @Partno29 = @Partno SET @Wkorder29 = @Wkorder SET @DL29 = 1 END --IF @LT30 = @Line BEGIN SET @DL30 = 1 END --IF @LT31 = @Line BEGIN SET @DL31 = 1 END --IF @LT32 = @Line BEGIN SET @DL32 = 1 END --IF @LT33 = @Line BEGIN SET @DL33 = 1 END IF @LT34 = 453 BEGIN SET @Partno34 = @Partno SET @Wkorder34 = @Wkorder SET @DL34 = 1 END --IF @LT35 = @Line BEGIN SET @DL35 = 1 END --IF @LT36 = @Line BEGIN SET @DL36 = 1 ENDGO
View 1 Replies
View Related
May 19, 2006
I am just trying to capture the return code from a stored proc as follows and if I get a 1 I want the SQL Task to follow a failure(red) constrainst workflow and send a SMTP mail task warning the customer. How do I achieve the Exec SQL Task portion of this, i get a strange error message [Execute SQL Task] Error: There is an invalid number of result bindings returned for the ResultSetType: "ResultSetType_SingleRow".
Using OLEDB connection, I utilize SQL: EXEC ? = dbo.CheckCatLog
EXEC SQL Task Editer settings:
RESULTSET: Single Row
PARAMETER MAPPING: User::giBatchID
DIRECTION: OUTPUT
DATATYPE: LONG
PARAMETER NAME: 0
PS-Not sure if I need my variable giBatchID which is an INT32 but I thought it is a good idea to feed the output into here just in case there is no way that the EXEC SQL TASK can chose the failure constrainst workflow if I get a 1 returned or success constraint workflow if I get a 0 returned from stored proceedure
CREATE PROCEDURE CheckCatLog
@OutSuccess INT
AS
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON
DECLARE @RowCountCAT INT
DECLARE @RowCountLOG INT
---these totals should match
SELECT @RowCountCAT = (SELECT Count(*) FROM mydb_Staging.dbo.S_CAT)
SELECT @RowCountLOG = (SELECT Count(*) FROM mydb_Staging.dbo.S_LOG)
--PRINT @RowCountCAT
--PRINT @RowCountLOG
BEGIN
IF @RowCountCAT <> @RowCountLOG
--PRINT 'Volume of jobs from the CAT file does not match volume of jobs from the LOG file'
--RETURN 1
SET @OutSuccess = 1
END
GO
Thanks in advance
Dave
View 6 Replies
View Related
Nov 7, 2003
execution plan of procedure shows
bookmark lookup cost : 46%
any way to reduce it ?
Thanks
alex
View 8 Replies
View Related
Apr 26, 2007
okay, so i've been slowly working on an application mostly VB/ASP.Net based that is basically i dummied down query builder. the user selects a bunch of controls off the website, then submits it for a query. the server then executes a dynamic stored procedure, and the website builds a count with the results. i have a couple of questions, i've come to the point where if the query isnt finished inside 30 seconds, the site times out, so i'm looking at a query here, and i have a "BookMark LOOKUP" that is costing me 32% of the query. what can i do to stop that?
how can i get my indexes to perform faster, and is it an issue with the procedure that causes some queries to time out, or is it just the way the data is organized?
View 20 Replies
View Related
Aug 17, 2007
Hi,
Please tell me how to implement the "Jump to Bookmark" in reports,
I mean to say, i have to move to another area or page in a report.
Please provide a sample for the same.
Thanks and Regards
Altaf Nizamuddin
View 1 Replies
View Related
Jul 23, 2005
When a nonunique nonclustered index is built on top of a clusteredindex, is it guaranteed that the bookmark in the nonclustered indexwill be kept in the same order as the clustered index?Here's an example to demonstrate my question:CREATE TABLE indextest (col1 int NOT NULL,col2 int NOT NULL,col3int,col4 int)ALTER TABLE indextest ADD PRIMARY KEY CLUSTERED (col1,col2)CREATE INDEX ix_indextest ON indextest (col1,col3)GOINSERT indextest VALUES (1,2,1,1)INSERT indextest VALUES (1,3,2,1)INSERT indextest VALUES (1,4,2,1)INSERT indextest VALUES (2,1,1,1)INSERT indextest VALUES (1,1,1,1)SELECT col1,col2 FROM indextest WHERE col1=1 AND col3=1DROP TABLE indextestThe select statement above is covered by the nonclustered index, sothat index is used. However, the nonclustered index is defined only toensure the ordering of col1 and col3 within the index; col1 and col2follow within the index as the bookmark to the clustered index. When Irun this query, my desired result is to have the records appear in theorder supported by the clustered index:1,11,2As it happens, the result I got was indeed in that order, but I don'tknow if it was mere coincidence, or if the bookmark in the nonclusteredindex is maintained in the same order as the clustered index. If Iwant to ensure the above order, is it sufficient to have thenonclustered index defined as above, or do I need to define it as:create index ix_indextest on indextest (col1,col3,col2)just to be sure that the results are returned in ascending order forcol1,col2? If the two-column index is sufficient, is it guaranteed tostill be sufficient in SQL2005 and future versions of SQL Server, or amI better off adding the third column just to be safe?Thank you,--Dennis Culley
View 4 Replies
View Related
Feb 4, 2006
I notice that SQL Server 2005 creates worktables where SQL 2000 does not. Often these work tables appear in STATISTICS IO, but they show a 0 scan count and 0 logical reads. These worktables often appear to be substituted for bookmark lookups.
Has the optimizer decided to use worktables instead of bookmark lookups (often resulting in a higher cost plan)?
Sharon
View 7 Replies
View Related
Nov 21, 2007
All,
Is there a way to combine the Bookmark and report link functionalities in reporting services. For example, I have two reports. When I click a link in first report, I would like to be able to navigate to second report but not at the top of the report but at a particular report item way down in the second report, sort of like an anchor on an HTML page. Can I do this?
Thanks.
View 1 Replies
View Related
Jun 7, 2006
Is there a way to jump from one report to a specific bookmark in the second report? I have a chart that jumps quite nicely to a filtered version of the report, but instead would like to be able to jump to the entire report at the specific location (e.g., Bookmark) related to the chart data item.
I know that it's quite easy to jump to a bookmark within the same report. What I can't quite determine is how to jump from one report to a specific section in a second report.
Thanks.
View 9 Replies
View Related
Aug 30, 2006
I know I can do to just show 1 entry
select * from table where no = @parameter_no
but is it possible to actually select ALL entries (I have 250 for now) in the list report, but jump to a particular # based on parameter?
Say I have ID 1 ~ 250 (select * from table) in DataSet, but when I enter 220 in parameter, the report still selects all 250 entries but jump to the 220 entry?
I have bookmark set up on each entry
Thanks for any help. I noticed in my search that jump to a report + bookmark isn't supported, does my situation fall under that?
View 1 Replies
View Related
Jun 5, 2015
I am using 2 charts in my SSRS Report. Requirement is to load the Right side chart based on the click event from left chart.
I can achieve it using go to report option. But the issue is total page getting refreshed while using this option. I feel bookmark option will be the best. But I don't think I can pass a value to Bookmarks.
View 2 Replies
View Related
Dec 10, 2006
If you display the execution plan and run the following:SET STATISTICS IO ONgoSELECT ProductID, SupplierIDFROM ProductsWHERE SupplierID = 1I don't understand how come there is noBookmark Lookup operation happening to get theProductID?I only see an Index Seek happening on SupplierID.There is no composite index SupplierID + ProductIDso what am I not understanding here?Thank you
View 3 Replies
View Related
Oct 7, 2011
I want to bookMark from one table to another in current report. Below are the 2 tables , when I select a
FromBrandName in the first table, it should take me to the second table row with the same
FromBrandName. Is this possible? Is there a function to access a specific running value other than First and Last?
View 3 Replies
View Related
Mar 3, 2006
hi
I had a view in which I did something like this
isnull(fld,val) as 'alias'
when I assign a value to this in the client (vb 6.0) it works ok in sql2000 but fails in 2005.
When I change the query to fld as 'alias' then it works ok in sql 2005 .
why ?? I still have sql 2000 (8.0) compatability.
Also some queries which are pretty badly written run on sql 2000 but dont run at all in sql 2005 ???
any clues or answers ?? it is some configuration issue ?
Thanks in advance.
View 5 Replies
View Related
Jul 27, 2006
Hi all--I'm trying to convert a function which I inherited from a SQL Server 2000 DTS package to something usable in an SSIS package in SQL Server 2005. Given the original code here:
Function Main()
on error resume next
dim cn, i, rs, sSQL
Set cn = CreateObject("ADODB.Connection")
cn.Open "Provider=sqloledb;Server=<server_name>;Database=<db_name>;User ID=<sysadmin_user>;Password=<password>"
set rs = CreateObject("ADODB.Recordset")
set rs = DTSGlobalVariables("SQLstring").value
for i = 1 to rs.RecordCount
sSQL = rs.Fields(0).value
cn.Execute sSQL, , 128 'adExecuteNoRecords option for faster execution
rs.MoveNext
Next
Main = DTSTaskExecResult_Success
End Function
This code was originally programmed in the SQL Server ActiveX Task type in a DTS package designed to take an open-ended number of SQL statements generated by another task as input, then execute each SQL statement sequentially. Upon this code's success, move on to the next step. (Of course, there was no additional documentation with this code. :-)
Based on other postings, I attempted to push this code into a Visual Studio BI 2005 Script Task with the following change:
public Sub Main()
...
Dts.TaskResult = Dts.Results.Success
End Class
I get the following error when I attempt to compile this:
Error 30209: Option Strict On requires all variable declarations to have an 'As' clause.
I am new to Visual Basic, so I'm on a learning curve here. From what I know of this script:
- The variables here violate the new Option Strict On requirement in VS 2005 to declare what type of object your variable is supposed to use.
- I need to explicitly declare each object, unless I turn off the Option Strict On (which didn't seem recommended, based on what I read).
Given this statement:
dim cn, i, rs, sSQL
I'm looking at "i" as type Integer; rs and sSQL are open-ended arrays, but can't quite figure out how to read the code here:
Set cn = CreateObject("ADODB.Connection")
cn.Open "Provider=sqloledb;Server=<server_name>;Database=<db_name>;User ID=<sysadmin_user>;Password=<password>"
set rs = CreateObject("ADODB.Recordset")
This code seems to create an instance of a COM component, then pass provider information and create the recordset being passed in by the previous task, but am not sure whether this syntax is correct for VS 2005 or what data type declaration to make here. Any ideas/help on how to rewrite this code would be greatly appreciated!
View 7 Replies
View Related
Mar 28, 2007
Dear Friends,
I am having 2 Tables.
Table 1: AddressBook
Fields --> User Name, Address, CountryCode
Table 2: Country
Fields --> Country Code, Country Name
Step 1 : I have created a Cube with these two tables using SSAS.
Step 2 : I have created a report in SSRS showing Address list.
The Column in the report are User Name, Address, Country Name
But I have no idea, how to convert this Country Code to Country name.
I am generating the report using the Layout tab. ( Data | Layout | Preview ) Report1.rdl [Design]
Anyone help me to solve this issue. Because, in our project most of the transaction tables have Code and Code description in master table. I need to convert all code into corresponding description in all my reports.
Thanks in advance.
Regards
Ramakrishnan
Singapore
28 March 2007
View 4 Replies
View Related
Feb 24, 2008
Hello,
I'm using ASP.Net to update a table which include a lot of fields may be around 30 fields, I used stored procedure to update these fields. Unfortunatily I had to use a FormView to handle some TextBoxes and RadioButtonLists which are about 30 web controls.
I 've built and tested my stored procedure, and it worked successfully thru the SQL Builder.The problem I faced that I have to define the variable in the stored procedure and define it again the code behind againALTER PROCEDURE dbo.UpdateItems
(
@eName nvarchar, @ePRN nvarchar, @cID nvarchar, @eCC nvarchar,@sDate nvarchar,@eLOC nvarchar, @eTEL nvarchar, @ePhone nvarchar,
@eMobile nvarchar, @q1 bit, @inMDDmn nvarchar, @inMDDyr nvarchar, @inMDDRetIns nvarchar,
@outMDDmn nvarchar, @outMDDyr nvarchar, @outMDDRetIns nvarchar, @insNo nvarchar,@q2 bit, @qper2 nvarchar, @qplc2 nvarchar, @q3 bit, @qper3 nvarchar, @qplc3 nvarchar,
@q4 bit, @qper4 nvarchar, @pic1 nvarchar, @pic2 nvarchar, @pic3 nvarchar, @esigdt nvarchar, @CCHName nvarchar, @CCHTitle nvarchar, @CCHsigdt nvarchar, @username nvarchar,
@levent nvarchar, @eventdate nvarchar, @eventtime nvarchar
)
AS
UPDATE iTrnsSET eName = @eName, cID = @cID, eCC = @eCC, sDate = @sDate, eLOC = @eLOC, eTel = @eTEL, ePhone = @ePhone, eMobile = @eMobile,
q1 = @q1, inMDDmn = @inMDDmn, inMDDyr = @inMDDyr, inMDDRetIns = @inMDDRetIns, outMDDmn = @outMDDmn,
outMDDyr = @outMDDyr, outMDDRetIns = @outMDDRetIns, insNo = @insNo, q2 = @q2, qper2 = @qper2, qplc2 = @qplc2, q3 = @q3, qper3 = @qper3,
qplc3 = @qplc3, q4 = @q4, qper4 = @qper4, pic1 = @pic1, pic2 = @pic2, pic3 = @pic3, esigdt = @esigdt, CCHName = @CCHName,
CCHTitle = @CCHTitle, CCHsigdt = @CCHsigdt, username = @username, levent = @levent, eventdate = @eventdate, eventtime = @eventtime
WHERE (ePRN = @ePRN)
and the code behind which i have to write will be something like thiscmd.CommandType = CommandType.StoredProcedure;
cmd.Parameters.AddWithValue("@eName", ((TextBox)FormView1.FindControl("TextBox1")).Text);cmd.Parameters.AddWithValue("@ePRN", ((TextBox)FormView1.FindControl("TextBox2")).Text);
cmd.Parameters.AddWithValue("@cID", ((TextBox)FormView1.FindControl("TextBox3")).Text);cmd.Parameters.AddWithValue("@eCC", ((TextBox)FormView1.FindControl("TextBox4")).Text);
((TextBox)FormView1.FindControl("TextBox7")).Text = ((TextBox)FormView1.FindControl("TextBox7")).Text + ((TextBox)FormView1.FindControl("TextBox6")).Text + ((TextBox)FormView1.FindControl("TextBox5")).Text;cmd.Parameters.AddWithValue("@sDate", ((TextBox)FormView1.FindControl("TextBox7")).Text);
cmd.Parameters.AddWithValue("@eLOC", ((TextBox)FormView1.FindControl("TextBox8")).Text);cmd.Parameters.AddWithValue("@eTel", ((TextBox)FormView1.FindControl("TextBox9")).Text);
cmd.Parameters.AddWithValue("@ePhone", ((TextBox)FormView1.FindControl("TextBox10")).Text);
cmd.Parameters.AddWithValue("@eMobile", ((TextBox)FormView1.FindControl("TextBox11")).Text);
So is there any way to do it better than this way ??
Thank you
View 2 Replies
View Related
Oct 16, 2007
Hi all,
Could someone tell me if custom code function can capture the event caused by a user? For example, onclick event on the rendered report?
Also, can custom code function alter the parameters of the report, or refresh the report?
Thanks.
View 2 Replies
View Related
Jan 7, 2004
I am writing a pgm that attaches to a SQL Server database. I have an Add stored procedure and an Update stored procedure. The two are almost identical, except for a couple parameters. However, the Add function works and the Update does not. Can anyone see why? I can't seem to find what the problem is...
This was my test:
Dim cmd As New SqlCommand("pContact_Update", cn)
'Dim cmd As New SqlCommand("pContact_Add", cn)
Try
cmd.CommandType = CommandType.StoredProcedure
cmd.Parameters.Add("@UserId", SqlDbType.VarChar).Value = UserId
cmd.Parameters.Add("@FirstName", SqlDbType.VarChar).Value = TextBox1.Text
[...etc more parameters...]
cmd.Parameters.Add("@Id", SqlDbType.VarChar).Value = ContactId
cn.Open()
cmd.ExecuteNonQuery()
Label1.Text = "done"
cn.Close()
Catch ex As Exception
Label1.Text = ex.Message
End Try
When I use the Add procedure, a record is added correctly and I receive the "done" message. When I use the Update procedure, the record is not updated, but I still receive the "done" message.
I have looked at the stored procedures and the syntax is correct according to SQL Server.
Please I would appreciate any advice...
View 2 Replies
View Related
Jan 25, 2007
Hi,I need some help here. I have a SELECT sql statement that will query the table. How do I get the return value from the sql statement to be assigned to a label. Any article talk about this? Thanks geniuses.
View 2 Replies
View Related
Apr 19, 2006
Hi:
My service broker is working with 2 different instances in local server.But could not able to get working on 2 different servers because of Conversation ID cannot be associated with an active conversation error which I have posted.
After I receive the message successfully...in the end I get this message sent...
<Error xmlns="http://schemas.microsoft.com/SQL/ServiceBroker/Error">
<Code>-8462</Code>
<Description>The remote conversation endpoint is either in a state where no more messages can be exchanged, or it has been dropped.</Description>
</Error>
Why am i gettting this error after the conversation.
Thanks,
Pramod
View 7 Replies
View Related
Jan 28, 2008
Hi All,
Recently in an SSIS package I am getting the following error for a particular Data flow task.
Error: 2008-01-25 12:01:48.58
Code: 0xC0202009
Source: Import Datasynapse Data User Events Source [3017]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.
End Error
Error: 2008-01-25 12:01:48.73
Code: 0xC004701A
Source: Import Datasynapse Data DTS.Pipeline
Description: component "User Events Source" (3017) failed the pre-execute phase and returned error code 0xC0202009.
End Error
Our guess is when the data size of User Events table is more it throws this error. If we try to transfer small subset of data it succeeds. What could be reason for this error?
Since this is very urgent, immediate response would be very much appreciated.
Thanks & Regards,
Prakash Srinivasan
View 4 Replies
View Related
Feb 23, 2008
Original suggestion for my problem was - Select * from TableA where ID not in ( Select ID from TableB)
When I run the query below using the IN operator I get 227 records returned but when I use NOT IN I get zero records when I expect well over 10,000. What am I missing?
using SQL 2000 server
SELECT LinksInfo.L_ID, LinksInfo.C_ID, Companies.C_CompanyName, Companies.C_Email, Companies.C_CompanyEmailFROM LinksInfo INNER JOIN Companies ON LinksInfo.C_ID = Companies.C_IDWHERE (LinksInfo.L_ID IN (SELECT ZL_ID FROM Location_Zip))
ZL_ID is not a primary key in Location_Zip
View 2 Replies
View Related
Mar 25, 2008
Hello again,
I think im missing something here, i just cant find out what it is.
I have a temp table:
CREATE TABLE #tempSearch(tempID BIGINT IDENTITY(1,1) PRIMARY KEY,username NVARCHAR(20) COLLATE Finnish_Swedish_CI_AS,lastlogin DATETIME,signupdate DATETIME)
Now i am trying to retrieve some data for each user that is inside this tempSearch list and have an id over xxx (xxx = the value of the parameter @first_id):
SELECT @sql = 'SELECT profile_publicinfo.username, profile_publicinfo.gender, profile_publicinfo.signupdate, profile_profilephoto.imageurl, profile_profilephoto.alttext, settings_username.color, profile_publicinfo.lastloginFROM #tempSearch INNER JOIN dbo.profile_publicinfo ON profile_publicinfo.username = #tempSearch.usernameINNER JOIN dbo.settings_privateinfo ON settings_privateinfo.username = profile_publicinfo.usernameFULL OUTER JOIN dbo.profile_coolfacts ON profile_coolfacts.username = profile_publicinfo.username FULL OUTER JOIN dbo.profile_profilephoto ON profile_profilephoto.username = profile_publicinfo.usernameFULL OUTER JOIN dbo.settings_username ON settings_username.username = profile_publicinfo.usernameWHERE (profile_publicinfo.username IN (SELECT username FROM #tempSearch))AND #tempSearch.tempID >= @first_id'
SELECT @paramlist = '@first_id int'EXEC sp_executesql @sql, @paramlist, @first_id
I need to get the tempID from the tempSearch table in order to compare it with @first_id
When i run this i get the same username repeated like 30 times then it moves over to the next, when i debug the #tempSearch it looks fine, just the users that are suppose to be there.
View 1 Replies
View Related
Jun 17, 2004
Hi
I think I have installed MSDE sucessfully. The new servie is running, but how can I test ifit is working? Can I place my files anywhere on the system?
All help appreciated
View 1 Replies
View Related
Apr 25, 2006
I am using the following C#...
SQLXMLBULKLOADLib.SQLXMLBulkLoad3Class loader = new SQLXMLBULKLOADLib.SQLXMLBulkLoad3Class();
loader.ConnectionString = "PROVIDER=SQLOLEDB; Server=(local); database=TestDB; user id=test; password=password";
loader.ErrorLogFile = "C:log.txt";
loader.SchemaGen = true;
loader.SGDropTables = true;
loader.CheckConstraints = true;
loader.Execute(
"C:xsd.xsd"/* this file below */,
"C:xml.xml"
);
To generate tables in the database using the following xml schema...
(file: xsd.xsd...)
My problems is that it doesn't generate the tables and I am following the SQLXML2.0 documentation as closely as possible.
Does anyone know what I have to do to get it to generate the tables? Running it doesn't even produce an error.
Cheers,
Matt.
View 1 Replies
View Related
May 3, 2002
OK so I'm using dynamic sql to enable me to have a variable for the order by, but now it's giving me the following error
Syntax error converting character string to smalldatetime data type.
Any help is very much appreciated
Code follows
CREATE PROCEDURE spBattingAve1
@cid datetime,
@cid1 datetime,
@sid nvarchar(10)
AS
DECLARE @query nvarchar(4000)
SET @query = 'SELECT MAX(t_batting.runs) AS BestRuns,
COUNT(t_batting.dnb) AS DidNotBat, t_player.surname, t_player.firstname,
t_batting.player_id,
Sum(t_batting.runs) as SumOfruns, COUNT (*) AS Games,
COUNT (t_batting.notout) as nout,
(Sum(runs)/(COUNT(*)-(COUNT(notout)+COUNT(dnb)))) as AverageRun,
(COUNT(*)-COUNT(dnb)) AS Innings,
(SELECT COUNT(*) FROM t_batting inner join t_game on t_batting.game_id = t_game.game_id WHERE (t_batting.player_id = t_player.player_id) AND runs >= 50 AND runs <100 and t_game.date >= '+@cid+' And t_game.date <= '+@cid1+' GROUP BY t_batting.player_id) AS Overfifty,
(SELECT COUNT(*) FROM t_batting inner join t_game on t_batting.game_id = t_game.game_id WHERE (t_batting.player_id = t_player.player_id) AND runs >= 100 and t_game.date >= '+@cid+' And t_game.date <= '+@cid1+' GROUP BY t_batting.player_id) AS Overton
FROM t_batting
INNER JOIN t_game ON t_batting.game_id = t_game.game_id
INNER JOIN t_player ON t_batting.player_id = t_player.player_id
WHERE t_batting.player_id = t_player.player_id
AND t_game.date >= '+@cid+' And t_game.date <= '+@cid1+'
GROUP BY t_batting.player_id, t_player.surname, t_player.firstname, t_player.player_id
HAVING (COUNT(*)-(COUNT(notout)+COUNT(dnb))) <> 0
order by '+@sid+'
DESC'
exec (@query)
View 1 Replies
View Related
Jun 21, 2001
In SQL 7.0, when i use the below query in query analyzer, I got an error message. why?
======================
Set Identity_insert on
UPDATE Table1
SET no = 3
WHERE no = 4
Set Identity_insert off
go
Error message
=============
Server: Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'on'.
Server: Msg 156, Level 15, State 1, Line 7
Incorrect syntax near the keyword 'off'.
View 2 Replies
View Related
