Breakout Records Based On UNIT Total Without Cursor
Jan 30, 2008
I have a set of revenue records where there is a UNIT column and a REVCHARGE column. What I need to do is breakout the records into single records where the unit count is > 1 and calc the actual charge:
Ex:
Units REVCHG FIELD_A FIELD_B .....
3 3.00 ABCD EFGH
Needs to be converted to:
Units REVCHG FIELD_A FIELD_B .....
1 1.00 ABCD EFGH
1 1.00 ABCD EFGH
1 1.00 ABCD EFGH
The calc is obvious but how can I do this with a cursor but would like to do it without a cursor if possible? Anybody got an idea?
Thanks.
View 6 Replies
ADVERTISEMENT
Aug 21, 2007
The following query returns a value of 0 for the unit percent when I do a count/subquery count. Is there a way to get the percent count using a subquery? Another section of the query using the sum() works.
Here is a test code snippet:
--Test Count/Count subquery
declare @Date datetime
set @date = '8/15/2007'
select
-- count returns unit data
Count(substring(m.PTNumber,3,3)) as PTCnt,
-- count returns total for all units
(select Count(substring(m1.PTNumber,3,3))
from tblVGD1_Master m1
left join tblVGD1_ClassIII v1 on m1.SlotNum_ID = v1.SlotNum_ID
Where left(m1.PTNumber,2) = 'PT' and m1.Denom_ID <> 9
and v1.Act = 1 and m1.Active = 1 and v1.MnyPlyd <> 0
and not (v1.MnyPlyd = v1.MnyWon and v1.ActWin = 0)
and v1.[Date] between DateAdd(dd,-90,@Date) and @Date) as TotalCnt,
-- attempting to calculate the percent by PTCnt/TotalCnt returns 0
(Count(substring(m.PTNumber,3,3)) /
(select Count(substring(m1.PTNumber,3,3))
from tblVGD1_Master m1
left join tblVGD1_ClassIII v1 on m1.SlotNum_ID = v1.SlotNum_ID
Where left(m1.PTNumber,2) = 'PT' and m1.Denom_ID <> 9
and v1.Act = 1 and m1.Active = 1 and v1.MnyPlyd <> 0
and not (v1.MnyPlyd = v1.MnyWon and v1.ActWin = 0)
and v1.[Date] between DateAdd(dd,-90,@Date) and @Date)) as AUPct
-- main select
from tblVGD1_Master m
left join tblVGD1_ClassIII v on m.SlotNum_ID = v.SlotNum_ID
Where left(m.PTNumber,2) = 'PT' and m.Denom_ID <> 9
and v.Act = 1 and m.Active = 1 and v.MnyPlyd <> 0
and not (v.MnyPlyd = v.MnyWon and v.ActWin = 0)
and v.[Date] between DateAdd(dd,-90,@Date) and @Date
group by substring(m.PTNumber, 3,3)
order by AUPct Desc
Thanks. Dan
View 1 Replies
View Related
Apr 30, 2015
We were asked to create an SQL function to return a unit price based on various criteria. The function works fine except for the tiered pricing (use of BillingPriceTable) calculation. What we need to do is break up the total quantity passed to the function and return the total of prices found. In our example, we passed a quantity of 9,721 units and need to return a total price of 231.92 using the table below.
Low Qty High Qty Fee Actual Qty Price
0 7500 0.025 7500 187.50
7501 15000 0.020 2221 44.42
Below is the table definition that we have to work with (ugghh).
CREATE TABLE [dbo].[BillingPriceTable](
[PriceTableID] [int] IDENTITY(1,1) NOT NULL,
[entity] [varchar](4) NULL,
[PriceTableCode] [varchar](10) NULL,
[PriceTableName] [varchar](40) NULL,
[Code] ....
What we have so far is shown below. The columns that start with bdxx are the "High Qty" values and the columns that start with prxx are the price for that quantity range. So, the current SELECT is shown below and it returns the price based on the entire qty of 9,721 and returns a unit price of 0.020 and should return 0.023857628
The current SELECT is shown below and is returning 0.020 which is the fee for the total rather than calculating the fee twice, once for the 0-7500 and again for the 7501-15000 (actually 7501-9721). Two things came to mind, one was a WHILE loop and the other was possibly a ranking function of some sort.
ALTER FUNCTION [dbo].[fn_GetPrice]
(
@plincdvarchar(3),
@pgrpcodevarchar(4),
@pitmcodevarchar(4),
@qtydecimal(10,1) = 1,
@corpnbrvarchar(9)
)
[Code] ....
View 9 Replies
View Related
Mar 20, 2014
writing the query for the following, I need to collapse the continuity. If the termdate for an ID is one day less than the effdate of the next id (for the same ID) i need to collapse the records. See below example .....how should i write the query which will give me the desired output. i.e., get min(effdate) and max(termdate) if termdate is one day less than the effdate of next record.
ID effdate termdate
556868 1999-01-01 1999-06-30
556868 1999-07-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-01-31
556872 2004-02-01 2004-02-29
output should be ......
ID effdate termdate
556868 1999-01-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-02-29
View 0 Replies
View Related
Apr 16, 2006
I have two tables. ID table that has these fields
Code_id,YearPeriod, ReachedDate fields. And table
Amount that has Code_id,Amount,Date fields. What I
need to do is write a cursor that when the
amount.Amount adds up to $100.00 it Updates the
ReachedDate in the ID table to the amount.date fields
value of that record. Any help would be greatly appreciated.
View 1 Replies
View Related
Apr 16, 2006
I have two tables. ID table that has these fields
Code_id,YearPeriod, ReachedDate fields. And table
Amount that has Code_id,Amount,Date fields. What I
need to do is write a cursor that when the
amount.Amount adds up to $100.00 it Updates the
ReachedDate in the ID table to the amount.date fields
value of that record. Any help would be greatly appreciated.
View 6 Replies
View Related
Oct 17, 2014
I have an procedure that uses a cursor to decrement a total in one table based on value in another. I am trying to rewrite this to be set based but having some issues getting the correct values.
one table will have a total amount available and the other table will have line items for the amount to decrement (think amount left on gift card). If the total amount remaining is less than the line item amount then line item amount should be set to total amount available with total amount set to zero.
this last part is where I am having trouble.
Here is example table
CREATE TABLE qamt(id INT, amt INT);
CREATE TABLE qtot(id INT, tot INT);
INSERT INTO qamt
VALUES(1,10),
(1,20),
(1,30),
(2,90),
[Code] ....
In the end I would want to update the qamt and qtot tables. I basically want to accomplish a quirky update across multiple tables.
View 4 Replies
View Related
Sep 19, 2007
I want to create a report which should be looked like this.
Members Joined
Members
Borrower
Depositor
Members Joined Yesterday
8
4
4
Members Joined Last 7 days
39
20
19
Members Joined Last 30 Days
243
120
122
Members
Borrower
Depositor
2007 Members Joined to Date
1,052
510
542
Q1-07
415
200
215
Q2-07
445
210
235
Q3-07 (To date)
192
100
92
All Members Joined
1,052
510
542
In the data base, there are some tables called members, loans and deposits containing members names, joined date , etc.
Example:
MembersTable
MemberName MemberID etc
LoansTable
MemberName CommencedDate
DepositorTable
MemberName CommencedDate
I assume that I should be able to create a report using matix format. But I want to clarify few things before I start. How do I calculate nu members? Data base tables contains only names of the members but not numbers. Other thing is how can I group members by perticular time periods as shown above? Do I need to use parameters? Also In the table, members can be borrowers or a depositors? How can clarify this one?
Please Can anyone give an idea? How to start and which direction I should go etc?
Thanks
View 20 Replies
View Related
Jul 20, 2005
Does anyone have any good references they could recommend on Cursorbased SQL writing? I have to create SQL that can loop though recordssimular to VB loops and I have been told that this is the way to go.Any recommendations would be helpful.
View 7 Replies
View Related
Mar 21, 2014
What I need to do it select the top 80 percent of records per group based on the group total. To be clear I am not trying to just grab the top x percent of rows.
Table 1:
DealerID RepairID
1 1
1 2
1 3
1 4
1 5
1 6
1 7
1 8
1 9
1 10
2 11
2 12
2 13
Table 2:
RepairID Tire
1 225/65R17 102T
2 225/65R17 102T
3 225/65R17 102T
4 235/60R18 102V
5 235/60R18 102V
6 235/60R18 102V
7 235/60R18 102V
8 205/55R16 89H
9 205/70R15 89H
13 225/65R17 102T
Table 1 has the total number of repair orders per dealer. This can be obtained by simply grouping on DealerID and counting the number of RepairIDs.
Table 2 has information on some of the repair orders and it is needed to select the top 80% of tire sizes. This table will be joined to Table 1 and grouped by DealerID and Tire.
Desired Output:
DealerIDTire RepairsOfThisTireRepairCount PercentOfTotalRepairOrders
1 235/60R18 102V4 10 40
1 225/65R17 102T3 10 30
1 205/55R16 89H1 10 10
2 225/65R17 102T1 3 33
The equation I am given to calculate the top tires per dealer is as follows: Total # of tires for the size / Total # of repair orders per dealer.
Here is what I have so far though I think I might have to rewrite all of it.
SELECT
DealerID ,
COUNT(RepairID)
INTO #TotalDealerRepairOrders
FROM
dbo.Table1
GROUP BY
DealerID
SELECT
[code].....
View 9 Replies
View Related
Nov 9, 2015
I am trying to calculate the the running total but also tried to reset to reset to zero based on a value of a column.
here I am trying to calculate the value of CalcVal column based on column Flag value...actually it is running total but it reset to zero if Flag value is 0.
Here is the example of data along with required column
MonthId Flag CalcVal
201401 1 1
201402 1 2
201403 1 3
201404 1 4
201405 1 5
and so on .........
View 8 Replies
View Related
Feb 14, 2008
Hi,
I would like to get some advises on how creating some kind of reports with Report builder
Lets say i have these two tables with these columns
Table Product
ProductName
Table ProductInstance
Product ID
CreationDate
CompletedDate
I would like to be able to create with report builder a report that looks this
Start Date : 2008/10/01 - End Date : 2008/10/30
Total Total Total
In Out OutStanding
ProductName1 10 0 3
ProductName2 5 5 2
ProductName3 8 8 5
ProductName4 12 5 6
Total In : total number of product created between StartDate and EndDate
Total Out : Total number of product completed between Start Date and End Date
Total OutStanding : Total number of product that have not yet been completed.
Any suggestion and advise on how to achieve this ?
View 2 Replies
View Related
Nov 9, 2005
Guys
Here's the scenario
create table data1 (dealid varchar(6) , datex smalldatetime , Tn INT)
insert data1 (dealid , datex , Tn )
values ('12345' , '31-12-2005' , 9999)
insert data1 (dealid , datex , Tn )
values ('12345' , '30-11-2005' , 9999)
insert data1 (dealid , datex , Tn )
values ('12345' , '31-10-2005' , 9999)
insert data1 (dealid , datex , Tn )
values ('98765' , '31-12-2005' , 2)
insert data1 (dealid , datex , Tn )
values ('98765' , '30-11-2005' , 1)
insert data1 (dealid , datex , Tn )
values ('98765' , '30-11-2005' , 0)
select * from data1
I need to update the Tn column from the default 9999 for the 3 rows in this table where the dealid is 12345 based on the value in the datex column so the row with the 'highest ie most recent date' gets a 0. I then need to assign the value 1 to the next highest and so on until all rows (in this case 3) get incrementing integer values. It's easy with a cursor but can't get my head round doing it in a set-based way
Any ideas
View 3 Replies
View Related
Sep 7, 2007
I am replacing cursor logic in a SP to a setbased approach to scale better. My setbased approach seems to be better but it runs very fractionaly faster (execution time) than the cursor approach for a single run in test environment. I think resource cost wise, my set based approach should be better. Number of rows iterated thru this cursor is small (0-150). This particular SP is called over 2000 times in production everyday. Is it worth the trouble changing this if we get only marginally benefits, will my set-based approach work better on a server that has lot of activity (lot of connections etc). Our db server runs at about 75-85% cpu usage daily and this particular SP accounts to 13% CPU usage for 2000+ executions.
If the data set involved in cursors is small, is it worth the trouble changing them to set based approaches?
Am I doing right to change this SP to setbased approach.
View 3 Replies
View Related
Mar 13, 2008
I have a SQL data source and i would like to present the total number of different records based on a "status" field.
I have done total records in the past by doing this:
protected void SqlDataSource1_Selected(object sender, SqlDataSourceStatusEventArgs e) { int RecordCount = e.AffectedRows; if (RecordCount == 1) { litRecordCount.Text = "1 record found"; } else { litRecordCount.Text = RecordCount.ToString() + " records found"; } }
This would work, howerver, my SQLdatasource choose * records, and not based on a WHERE condition. Is there any way to total just those with a status of "Initialized" ?
I tried to do it on the Gridview, but then I realized if I have paging on, it will only be on that front page.
thoughts?
View 3 Replies
View Related
Feb 13, 2002
Hi there!
Here is my situation:
table 'ReceiptHeader'
IDCustomerIDDateCreated
1225102/06/2002
1332102/09/2002
1444002/15/2002
table 'ReceiptDiscount'
IDDiscountIDReceiptHeaderIDAmount
111210.00
241250.00
311325.00
**a receipt can have multiple discounts**
Table 'ReceiptDetail'
ReceiptHeaderID LineItemIDTotal
121155.33
131145.33
141241.66
**for this example there is only one line item per receipt**
Without using a cursor, i would like to return a result set
like this one below using a set based solution...
ReceiptIDCustomerIDDiscountTotal
1225160.00155.33
1332125.00145.33
144400.00241.66
Thanks,
SF
View 1 Replies
View Related
Jun 2, 2008
Hey All,
I am trying to convert cursor based stored proc in to set based simple statements stored proc. As this stored proc has created alot of performance issues. I am confuse now as I spent my most of time creating this stored proc. Please advise how can I convert this stored proc into set base simple statment.
Thanks in advance.
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER Procedure [SampleStoredProc]
@Var1varchar(20),
@Var2varchar(3),
@Var3 varchar(2) = 'Dummy'
As
declare @selectlist varchar(5000)
declare @tableBuild varchar(1000)
declare @FieldName varchar(50)
declare @FieldSelect varchar(500)
declare @FieldTitle varchar(50)
declare @TableName varchar(50)
declare @holdTable varchar(50)
declare @title varchar(50)
declare @holdTitle varchar(50)
declare @PageName varchar(50)
declare @sequence varchar(100)
declare @extraCriteria varchar(200)
declare @holdCriteria varchar(200)
declare @insertSQL varchar(5000)
declare @ConvertRoutine varchar(500)
declare @loopCtrl1 bit
declare @loopCtrl2 bit
declare @ConvertSQL varchar(5000)
declare @PrevValue varchar(50)
declare @NewValue varchar(50)
declare @ActionTxtvarchar(1)
declare @Descriptionvarchar(20)
declare @effDatevarchar(10)
declare @transEffDatevarchar(10)
declare @expDatevarchar(10)
declare @lastTransDatevarchar(10)
declare @policyStatusvarchar(2)
declare @reasAmendDescvarchar(50)
declare @policyNumbervarchar(20)
declare @riskStatevarchar(20)
declare @PriorPremmoney
declare @AmendPremmoney
declare @PremDiffmoney
declare mtcursor cursor for
select TableName, FieldName, FieldSelectTxt, FieldTitleTxt, SequenceFieldName, ExtraCriteriaTxt, PageTitleTxt, ConversionRoutineTxt from MyTable1
where Column1 = @Var2
order by PageDisplaySequenceNbr, TableName, ExtraCriteriaTxt, SequenceFieldName
open mtcursor
fetch next from mtcursor into @TableName, @FieldName, @FieldSelect, @FieldTitle, @sequence, @extraCriteria, @title, @ConvertRoutine
set @selectlist = 'Val1, Val2,' + @sequence + ' as UnitNbr'
set @tableBuild = 'Create table #tempTable (Val1 varchar, Val2 int, UnitNbr varchar(20)'
set @loopCtrl1 = 0
set @loopCtrl2 = 0
WHILE (@loopCtrl1 = 0)
begin
set @holdTable = @TableName
set @holdCriteria = @extraCriteria
set @holdTitle = @title
if @FieldSelect = ''
set @selectlist = @selectlist + ',' + @FieldName
else
set @selectlist = @selectlist + ',' + @FieldSelect
set @tableBuild = @tableBuild + ',' + @FieldName + ' varchar(50)'
fetch next from mtcursor into @TableName, @FieldName, @FieldSelect, @FieldTitle, @sequence, @extraCriteria, @title, @ConvertRoutine
if @@fetch_status <> 0
set @loopCtrl2 = 1
if (@TableName <> @holdTable) or (@extraCriteria <> @holdCriteria) or (@title <> @holdTitle) or (@loopCtrl2 = 1)
begin
set @tableBuild = @tableBuild + ')'
set @insertSQL = '
declare mtcursor2 cursor for
select FieldName, FieldTitleTxt, ExtraUpdateMatchTxt, PullForUpdateInd, PullForAddInd, PullForDeleteInd, PullForAnyUpdateInd from MyTable1
where TableName = ''' + @holdTable + '''
and ExtraCriteriaTxt = ''' + @holdCriteria + '''
and PageTitleTxt = ''' + @holdTitle + '''
and Column1 = ''' + @Var2 + '''
order by FieldDisplaySequenceNbr
declare @FieldName varchar(50)
declare @FieldTitle varchar(50)
declare @ExtraUpdateMatch varchar(500)
declare @PullUpdate bit
declare @PullAdd bit
declare @PullDelete bit
declare @PullAnyUpdate bit
open mtcursor2
fetch next from mtcursor2 into @FieldName, @FieldTitle, @ExtraUpdateMatch, @PullUpdate, @PullAdd, @PullDelete, @PullAnyUpdate
WHILE (@@fetch_status = 0)
begin
if substring(@FieldTitle,1,1) = ''#''
set @FieldTitle = substring(@FieldTitle,2,len(@FieldTitle) - 1)
else
set @FieldTitle = '''''''' + @FieldTitle + ''''''''
if @PullAnyUpdate = 1
begin
exec (''INSERT MyTable2 SELECT ''''' + @Var1 + ''''', A.UnitNbr, ''''' + @holdTitle + ''''', '' + @FieldTitle + '', A.'' + @FieldName + '', B.'' + @FieldName + '', ''''U''''
from #tempTable A left join #tempTable B on B.UnitNbr = A.UnitNbr and B.Val1 = ''''U'''' '' + @ExtraUpdateMatch + ''
where A.Val1 = ''''O'''' and B.Val1 = ''''U'''''')
end
else
begin
if @PullUpdate = 1
exec (''INSERT MyTable2 SELECT ''''' + @Var1 + ''''', A.UnitNbr, ''''' + @holdTitle + ''''', '' + @FieldTitle + '', A.'' + @FieldName + '', B.'' + @FieldName + '', ''''U''''
from #tempTable A left join #tempTable B on B.UnitNbr = A.UnitNbr and B.Val1 = ''''U'''' '' + @ExtraUpdateMatch + ''
where A.Val1 = ''''O'''' and B.Val1 = ''''U'''' and ((A.'' + @FieldName + '' <> B.'' + @FieldName + '') or (A.'' + @FieldName + '' is null and B.'' + @FieldName + '' is not null)
or (A.'' + @FieldName + '' is not null and B.'' + @FieldName + '' is null)) '')
end
if @PullAdd = 1
exec(''INSERT MyTable2 SELECT ''''' + @Var1 + ''''', UnitNbr, ''''' + @holdTitle + ''''','' + @FieldTitle + '', ''''n/a'''', '' + @FieldName + '', ''''A'''' from #tempTable A where Val1 = ''''A'''''')
if @PullDelete = 1
exec(''INSERT MyTable2 SELECT ''''' + @Var1 + ''''', UnitNbr, ''''' + @holdTitle + ''''','' + @FieldTitle + '', '' + @FieldName + '', ''''n/a'''', ''''D''''
from #tempTable A where Val1 = ''''D'''''')
fetch next from mtcursor2 into @FieldName, @FieldTitle, @ExtraUpdateMatch, @PullUpdate, @PullAdd, @PullDelete, @PullAnyUpdate
end
close mtcursor2
deallocate mtcursor2'
exec (@tableBuild + ' insert into #tempTable select ' + @selectlist + ' from ' + @holdTable + ' where Id = ' + '''' + @Var1 + '''' + @holdCriteria + @insertSQL)
set @selectlist = 'Val1, Val2,' + @sequence + ' as UnitNbr'
set @tableBuild = 'Create table #tempTable (Val1 varchar, Val2 int, UnitNbr varchar(20)'
end
if @loopCtrl2 = 1
set @loopCtrl1 = 1
end
close mtcursor
deallocate mtcursor
Delete from MyTable2 where ltrim(rtrim(PreviousValueTxt)) = ltrim(rtrim(EndorsedValueTxt)) and ActionTxt='U' and ID=@Var1
declare deletecursor cursor for
select distinct PageNm from MyTable2 where Id = @Var1 and ActionTxt = 'U'
open deletecursor
fetch next from deletecursor into @PageName
while @@fetch_status = 0
begin
if (SELECT count(*) from MyTable2 where Id = @Var1 and PageNm = @PageName and ActionTxt = 'U' and PreviousValueTxt <> EndorsedValueTxt ) = 0
DELETE FROM MyTable2 where Id = @Var1 and PageNm = @PageName and ActionTxt = 'U'
fetch next from deletecursor into @PageName
end
close deletecursor
deallocate deletecursor
declare convertcursor cursor for
select a.PreviousValueTxt, a.EndorsedValueTxt, A.EntrySequenceNbr, A.ActionTxt, b.ConversionRoutineTxt from MyTable2 a
inner join MyTable1 b
on a.PageNm = b.PageTitleTxt and a.FieldNm = b.FieldTitleTxt and b.ConversionRoutineTxt <> ''
where a.Id = @Var1
open convertcursor
fetch next from convertcursor into @PrevValue, @NewValue, @Sequence, @ActionTxt, @ConvertRoutine
while @@fetch_status = 0
begin
set @ConvertSQL = 'declare @PrevConverted varchar(50) declare @NewConverted varchar(50)'
set @ConvertSQL = @ConvertSQL + ' declare @ConvertInput varchar(50) '
set @ConvertSQL = @ConvertSQL + ' declare @Var3 varchar(2) '
set @ConvertSQL = @ConvertSQL + ' set @Var3 = ''' + @Var3 + ''''
if @ActionTxt = 'A'
set @ConvertSQL = @ConvertSQL + ' set @PrevConverted = ''' + @PrevValue + ''''
else
begin
set @ConvertSQL = @ConvertSQL + ' set @ConvertInput = ''' + @PrevValue + ''''
set @ConvertSQL = @ConvertSQL + ' set @PrevConverted = (' + @ConvertRoutine + ')'
end
if @ActionTxt = 'D'
set @ConvertSQL = @ConvertSQL + ' set @NewConverted = ''' + @NewValue + ''''
else
begin
set @ConvertSQL = @ConvertSQL + ' set @ConvertInput = ''' + @NewValue + ''''
set @ConvertSQL = @ConvertSQL + ' set @NewConverted = (' + @ConvertRoutine + ')'
end
set @ConvertSQL = @ConvertSQL + ' update MyTable2 set PreviousValueTxt = @PrevConverted, EndorsedValueTxt = @NewConverted
where EntrySequenceNbr = ''' + @Sequence + ''''
exec (@ConvertSQL)
fetch next from convertcursor into @PrevValue, @NewValue, @Sequence, @ActionTxt, @ConvertRoutine
end
close convertcursor
deallocate convertcursor
if @Var2 = 'PA '
--exec PAConfirmCovConversions @Var1 = @Var1
exec PAConfirmCovConversions @Var1 = @Var1, @Var3 = @Var3
Create table #pageSeqTable (PageTitle varchar(50), PageSeq int)
insert into #pageSeqTable
select distinct PageTitleTxt, PageDisplaySequenceNbr
from MyTable1
where Column1 = @Var2
select PageNm, RowNumber, FieldNm, PreviousValueTxt, EndorsedValueTxt, ActionTxt
from MyTable2, #pageSeqTable b
where Id = @Var1 and PageNm = b.PageTitle
order by b.PageSeq, RowNumber, ActionTxt desc, EntrySequenceNbr
select @effDate = convert(char,EffectiveDate,101), @transEffDate = convert(char,TransactionEffectiveDt,101), @expDate = convert(char,LastTransactionEffectiveDt,101),
@policyStatus = PolicyStatusCd, @reasAmendDesc = ReasonAmendedDes,
@policyNumber = PolicyNumber,
@riskState = StateName,
@AmendPrem = convert(money,PremiumAmount)
from SHPlaninfo A, SHSeleReasonAmended B, SHSeleStateCode C
where Id = @Var1
AND Val2 = (select max(Val2)
from SHPlanInfo
where Id = @Var1)
AND B.ReasonAmendedCd = A.ReasonAmendedCd
AND C.StateCode = A.RiskState
Select @PriorPrem = convert(money,PremiumAmount) FROM SHPlanInfo WHERE Id = @Var1 and Val2 = '0'
Set @PremDiff = @AmendPrem - @PriorPrem
select EffectiveDate = @effDate
select TransactionEffectiveDt = @transEffDate, ExpirationDate = @expDate, LastTransactionEffectiveDt = @lastTransDate
select AmendXPolStat = @policyStatus
select ReasonAmendedDes = @reasAmendDesc
select PolicyNumber = @policyNumber
select RiskState = @riskState
select PriorPremium = @PriorPrem select AmendPremium = @AmendPrem select PremiumDifference = @PremDiffSelect ClientNumber from SHClient with (nolock) where Id=@Var1 and ApplicantRecordInd = 1
delete from MyTable2 where Id = @Var1
return
View 1 Replies
View Related
Feb 14, 2008
Hello, I am having problems with this query below:
1 SELECT Table1.Email AS Email,
2 Table2.UserName AS Username,
3 Table3.Members_Paid AS Paid,
4 (SELECT DISTINCT COUNT(*)
5 FROM Table3 AS e JOIN Table3 AS m
6 ON e.Members_Sponsor = m.Members_ID
7 WHERE (e.Members_Sponsor = m.Members_ID)) AS TotalRecords
8 FROM Table1 INNER JOIN
9 Table2 ON Table1.UserId = Table2.UserId INNER JOIN
10 Table3 ON Table2.UserId = Table3.UserID
11 WHERE (Table3.Members_Sponsor = @UserId)Basicly what I am trying to do is get all members that belong to a certain manager along with those members count total of members they have below them.The code above is giving me the count of the first member only, not different counts for each member.Hope you understand what I am trying to say and do here. Hope someone can help me out cause this hase been driving me crazy for a few days now.
View 1 Replies
View Related
Sep 27, 2001
Hi everbody,
I want find out Total number records in one table without using select statment.
Some body as told to me there is system table you can find total number of records. Any body give me systable name.
Thanks
Jack
View 2 Replies
View Related
Sep 27, 2001
Hi everbody,
I want find out Total number records in one table without using select statment.
Some body as told to me there is system table you can find total number of records. Any body give me systable name.
Thanks
Jack
View 1 Replies
View Related
Sep 25, 2015
In report builder 3.0 I have row groups. I want a total at the end of each row but I want the total to be broken down by 3 columns based on 3 possible values of a field in the dataset. The report expands as the date range entered is increased. I want the total of clinic id + service id + program id + protocol id + appointment date but I want the total column to be broken down by appts that have shown or not shown or canceled.
See screenshots below for seeing how I have it configured. Is this possible? I have tried every combination of possibilities but I keep getting the row total in each of the 3 columns comprised of the total column.
and
The results look like:
The last Total column displays the entire row count NOT separated by the show, no show, and cancel status'. I have tried filters and different expressions but keep getting the same output. Is this even possible?
View 9 Replies
View Related
Mar 28, 2006
I know this question has been asked. And the usual answer is don't usecursors or any other looping method. Instead, try to find a solutionthat uses set-based queries.But this brings up several questions / senarios:* I created several stored procedures that take parameters and insertsthe data into the appropriate tables. This was done for easy access/usefrom client side apps (i.e. web-based).Proper development tactics says to try and do "code reuse". So, if Ialready have stored procs that do my logic, should I be writing asecond way of handling the data? If I ever need to change the way thedata is handled, I now have to make the same change in two (or more)places.* Different data from the same row needs to be inserted into multipletables. "Common sense" (maybe "gut instinct" is better) says to handleeach row as a "unit". Seems weird to process the entire set for onetable, then to process the entire set AGAIN for another table, and thenYET AGAIN for a third table, and so on.* Exception handling. Set based processing means that if one row failsthe entire set fails. Looping through allows you to fail a row butallow everything else to be processed properly. It also allows you togather statistics. (How many failed, how many worked, how many wereskipped, etc.)?? Good idea ?? The alternative is to create a temporary table (sandboxor workspace type thing), copy the data to there along with "status" or"valdation" columns, run through the set many times over looking forany rows that may fail, marking them as such, and then at the end onlydealing with those rows which "passed" the testing. Of course, in orderfor this to work you must know (and duplicate) all constraints so youknow what to look for in your testing.
View 13 Replies
View Related
Sep 18, 2006
Hi,
I am declaring the cursor based on a query which is generated dynamically. but it is not working
Declare @tempSQL varchar(1000)
--- This query will be generated based on my other conditon and will be stored in a variable
set @tempsql = 'select * from orders'
declare cursor test for @tempsql
open test
This code is not working.
please suggest
Nitin
View 12 Replies
View Related
Oct 29, 2007
I've got the following query:
WITH OrderedResults AS (SELECT some_table.*, ROW_NUMBER() OVER (ORDER BY some_field) as RowNumber FROM some_table)
SELECT TOP 10 *
FROM OrderedResults
WHERE RowNumber > 10;
which works well for returning "paginated" recordsets. But when it comes to displaying "page" links and next and previous links, I need a total count of records found... something along the lines of the MySQL CALC_FOUND_ROWS feature...
Is there some built-in MSSQL feature I can use for this, or do I have to do a SELECT count(*) FROM some_table to get this data?
Any advice is appreciated
View 1 Replies
View Related
Apr 4, 2008
Hi,
I've got this
SELECT vehicleref, capID, make, model, derivative, COUNT(vehicleref) total, SUM(case when inStock=1 then 1 else 0 end) AS stock, (SELECT dealer FROM tblMatrixDealers WHERE id=dealerid) As Dealer FROM tblMatrixStock WHERE inStock = 1 GROUP BY vehicleref, capID, make, model, derivative, dealerid
I need to get the number in stock, i.e. when instock=1 and the total i.e. when instock=1 or 0
But the problem is i'm only showing records where instock=1 so my SUM(case when inStock=1 then 1 else 0 end) AS stock statement is useless.
Whats the best way to do this
Thanks
View 3 Replies
View Related
Jun 7, 2015
I am creating a query that shows the consumption of stock against Manf Orders (M/O) and struggling on the last hurdle. I am having difficulties calculating a running total based on an Opening Balance. The first line returns the correct results but the following lines do not. I have tried other variants of the "Over Partition" but still no joy?
SELECT CASE WHEN ROWNUMBER > 1 THEN ''
ELSE A.Component
END AS Component ,
CASE WHEN ROWNUMBER > 1 THEN ''
ELSE A.SKU
[Code] ....
Please see attachment to view output.
View 7 Replies
View Related
Jul 30, 2007
ID DATE(dd/mm/yy) TYPE QTYIN COST_IN_AMT COST_OUT_AMT(MOVING AVERAGE)
1 01/01/2007 PURCHASE 10 1000
2 01/01/2007 PURCHAES 5 1100
3 01/01/2007 SALES -5 *TobeCalculated
4 02/01/2007 Purchase 20 9000
5 02/01/2007 SALES -10 *TobeCalculated
5 02/01/2007 purchase 50 8000
6 03/01/2007 Sales -10 *TobeCalculate
7 01/01/2007 Purchase 20 12000
I have a table when user add new sales or puchase will be added to this table ITEM_TXNS. The above date is part of the table for a ProductID . (The field is removed here)
In order to calculate the balance amount using moving average, I must calculated the cost_out_amt first on the fly.
When user add new sales I also need to determine the cost/unit for a product id using moving average. The problem is I can not just use sum, because i need to determine cost_out_amt for each sales first which will be calculated on the fly.
The reason i dont store the cost_out_amt (instead calculate on the fly) because User could Edit the previous sales/purchase txn or Insert new sales for a previous date. Example THe record with ID 9. By Adding this txn with ID 9, would cause all the cost_out_amt will be incorrect (Using moving Average) if i store the cost_amout_out on entrying txn and need to be recalculated.
Instead I just want to calculate on the fly and able to determine the cost avr for a specific point of time.
Should I just use Cursor and loop all the record and calculate the cost or maybe I can just use on Select Statement?
View 20 Replies
View Related
Apr 15, 2008
Hi guysI'm mulling over the best way to do something and would like your input. Forgive me if this is a bit 101 - I haven't ever had to do this in SQL before!Fairly standard set up - Hierarchy table modelling the structure of an organisation.Related table associating members of staff to the hierarchy.I want to return all levels of the hierarchy and for each level I would like to know the total number of people in the level (so for a division it would be the sum of all people in the child teams).Parameters - This table will be modelling many organisations' structures - I cannot guarentee anything like "there will never be more than n levels". As such - I would strongly prefer to have something that is iterative recursive. I can change the schema to suit the method I use if necessary. Database is not transactional - I am not concerned about updating speed. SQL Server 2K5.I've tried CTE but it turns out you cannot use group by in CTEs (even in derived tables). I have not yet tried feeding it a view or similar.I have not tried nested sets, materialised paths, accumulator table - I thought I would see if there is something obvious before I start piddling around with those.Ta!
View 11 Replies
View Related
Jun 7, 2012
I have a Select TOP 1 statement which works fine, but i also want to count the total records at the same time. This is my SQL
Code:
SELECT TOP (1) dbo.ClientOffers.ProductID, dbo.ClientOffers.ClientID, dbo.Offers.Offertext, dbo.Offers.Offerlink, dbo.Offers.Image, dbo.Offers.Cost
FROM dbo.ClientOffers INNER JOIN
dbo.Offers ON dbo.ClientOffers.OfferID = dbo.Offers.OfferID
WHERE (dbo.ClientOffers.ProductID = 1284) AND (dbo.ClientOffers.ClientID = 0)
How do i also count the total records?
View 7 Replies
View Related
Feb 5, 2004
We have an helpdesk sytem on SQL 2000. I am trying to show how much calls have been assigned to each parent category plus it's child categories in a single row. The thing is when I run my query it display parent and child categories and each on it's own rows. I do get the call totals for each row, but I would like to add the totals of the rows together and display it on row. The new table must have then 6 rows (because there is 6 parent categories) with the total of all calls for that parent category, as well as it's childs. Example:
parameter # Calls
------------ --------
desktoppp 5
desktopqq 6 {This is what I am getting at this stage}
desktop t 4
network
r 9
networkgg 10
softwarevv 3
This is what I would like to have:
parameter # Calls
------------ -------
desktop 15
network 19
software 3
Please Help!
View 2 Replies
View Related
Apr 30, 2008
SQL Server 2005.
Schema is not fixed at this stage - small project, schema can be adapted if neccessary.
This needs to be produced in SQL Server - there is no client application.
Hi
I am really struggling to write the SQL for the following requirement and have got to the stage where I think I need someone to give me some pointers. I can't believe this is a novel requirement but I haven't had to do this before nor can find anything similar when googling.
I have a hierarchy detailing an organisation structure. Eventually the table will store many structures and these may one day be "pseudo structures" to enable really granular reporting. As such I cannot really say "there will never be more than N levels to this hierarchy". Currently I'm using a standard adjacency design. From now on I'll call the items in the table "business units".
There is a further table with a related FK declared which associates people with business units.
Requirement: Return all business units and cumulative total total of employees for each of these units (i.e. the total for each business unit will be the number of people in that unit plus the sum of the people in all the child units).
I've asked this question on dbforums but ended up a blind alley despite Peter's attempt to help. I'm starting again from scratch but feel free to review the (now dead) thread here:
http://www.dbforums.com/showthread.php?t=1629366
To summarise - I tried the CTE route but of course this evaluates the hierarchy from the top down. To fulfill the requirement, the bottom of the structure needs to be the starting point. I also tried reversing the hierarchy so that children, rather than the parent, are stored but my query fails if there are 3+ levels.
Code to reproduce problem (note - I expect that I will need to get the employee count per business unit prior to working with the hierarchy so I have flattened the schema to reflect this - I think I can handle the SQL to get the non-cumulative count per business unit ):
DECLARE @table TABLE
(
unit_codeTINYINT
, parent_codeTINYINT
, headcountINT
, PRIMARY KEY CLUSTERED (unit_code)
)
INSERT INTO @table (unit_code, parent_code, headcount)
SELECT 1, 4, 10 UNION ALL
SELECT 2, 4, 130 UNION ALL
SELECT 3, 10, 93 UNION ALL
SELECT 4, 10, 7 UNION ALL
SELECT 10, NULL, 1
Required output:
unit_codecumulative_headcount
------------------------------------
110
2130
393
4147
10241
Many thanks
View 5 Replies
View Related
Feb 15, 2007
HiI'm migrating from Access til MySQL.Works fine so far - but one thing is nearly killing me:I got the count of total records in a variabel - (antalRecords)I got the count for the Field Q1 where the value value is = 'nej'Now I just need to calculate how many % of my records have the value 'nej'I access this worked very fine - but with MySQL ( and ASP) I just cant getit right!!! I go crazy ....My code looks like this :strSQL="SELECT COUNT(Q1) AS Q1_nej FROM Tbl_evaluering " &_"WHERE Q1 = 'NEJ' "set RS = connection.Execute(strSQL)antal_nej = RS("Q1_nej")procent_nej = formatNumber((antal_nej),2)/antalrecords * 100Hope ...praying for help ...Please ;-)best wishes -Otto - Copenhagen
View 3 Replies
View Related
Nov 5, 2015
I want to split the data every employeid wise based on fromdate and todate if totaldays>1.
sample output specified below ....but same output required for allthe empid's
create table attendence(EmployeeID nvarchar(20),[From] datetime,[To] datetime,TotalDays float)
insert into attendence values('1417','2015-11-02 22:48:49.450','2015-11-04 22:48:49.450',3)
insert into attendence values('1418','2015-11-04 22:48:49.450','2015-11-04 22:48:49.450',1)
insert into attendence values('1419','2015-11-03 22:48:49.450','2015-11-04 22:48:49.450',2)
insert into attendence values('1420','2015-11-04 22:48:49.450','2015-11-05 22:48:49.450',2)
insert into attendence values('1421','2015-11-01 22:48:49.450','2015-11-04 22:48:49.450',4)
OP
-------------------------
EmployeeID [From] [To] TotalDays
1417 2015-11-02 22:48:49.450 2015-11-02 22:48:49.450 3
1417 2015-11-03 22:48:49.450 2015-11-03 22:48:49.450 3
1417 2015-11-04 22:48:49.450 2015-11-04 22:48:49.450 3
View 3 Replies
View Related
