When i want to debug the stored procedure in SQLServer2000 query analyzer
the stepInto button gets disabled so it executes sp rather than debug.
Exec sp_sdidebug 'legacy_on' is not working.
Thanx in advance
Hi 2 all,
How to create stored procedures using a Wizard in sqlserver 2005 (Like from "Run a Wizard" in sqlserver 2000)
Please Helpme.
Thanx in advance.
Hi,
This Might be a really simple thing, however we have just installed SQL server 2005 on a new server, and are having difficulties with the set up of the Store Procedures. Every time we try to modify an existing stored procedure it attempts to save it as an SQL file, unlike in 2000 where it saved it as part of the database itself.
Thank you in advance for any help on this matter
Hi!
I use sql 2005 express on my computer for testing. The server that hosts my site is a sql 2000 server. Therefore I tuned the one database I use down to sql 8.
When I create stored procedures from web developer express, to the local sql 8 database I have in my sql express, it works nice. But when I copy all my files and my stored procedure to the webhost, it doesn't work.
Do you guys have any suggestions?
Thanks in advance.
Is there any way to make MS SQL Server 2000 to perform some stored procedures, say 3 times a day? If so, how? Thanks.
View 2 Replies View Relatedsivanantham writes "How to create Stored Procedures in SQL Server 2000?
also give me samples with Cursors and all
Thanks
Sivanantham"
Hi gurus
i have a assignment on hands to transfer store procedures of 2005 to 2000. I have tryed by scripting SPs and then runing them in 2000 QA, but it gives me error every time ....... so please help me to resolve this problem.
thanks
shekhar
HiI'm running a Windows 2000 SP4 Server which has SQL Server 2000 SP4running.My problem is whenever i try to import a database over from one serverto the other the tables/data etc imports but the stored procedures andviews are not imported over and when i try to select these to importthey do not appear in the list. Any ideas on whats up?Many Thanks in advanceT
View 1 Replies View RelatedHello
I have restored a SQL 2000 backup of my database, ever since my web applications are unable to use any of the stored procedures.
I get the following error:
Could not find stored procedure 'xxx'.
If I use enterprise manager and go to the procedures tab the procedure appears there.
Any ideas what is up?
PS: The username has been changed, before the backup it was "user1" now its something else. For some reason it still shows that the procedure object is owned by "user1". Could this be the problem?
Thanks in advance.
What is the overhead of using extended stored procedures?I created a table with 500,000 rows.1) I ran a select on two columns and it runs in about 5 seconds.2) I ran a select on one column and called an UDF (it returns aconstant string) and it takes 10 seconds.3) I ran a select on one column and called a UDF that calls an extendedstored procedure that returns a string and it takes 65 seconds.I also tried running test 3 with 4 concurrent clients and each clienttakes about 120 seconds.
View 1 Replies View RelatedWhat system stored procedures have changed between SQL 2000 and SQL 2005?
View 4 Replies View RelatedHi allI am looking for the best method to automate a website's database management. Lets say I have a user registration database and the users register. This sends an automated email to the user with a link to activate the users registration. If the user does not register within 24 hours, his registration must be automatically deleted from the database using a stored procedure.I know how to do this using the global.aspx file, however there must be an alternative way of doing this, especially if the database is an SQL database. I do not know how much MSSQL server access is given to a developer by an as ISP who hosts the website.Can anyone tell me what would be the best method to use.ThxWarren
View 1 Replies View RelatedHi,Has any one ever compared the performance of calling a DataTable'sSelect method with a stored procedure doing the same thing?My point is:dataRows = DataTable.Select(filter) is better orPassing paramters to stored procedure?The datatable holds about 500-700 rows at any given time.If I select one of the approaches the business logic will go intorespective layers.With dotnet in picture what would be a good approach- Have the data in Datatable and do a filter on the data or callstored procedures which has been the convention.Can some one pl. suggest?
View 3 Replies View RelatedI've successfully carried out pull subscription using Wizard in SQL server 2000.
But NOW its the time to deploy the project & I've to do it programatically........
i tried to use the default stored procedures like "sp_addmergepullsubscription ", "sp_addmergepullsubscription_agent ", "sp_reinitmergepullsubscription ", with respective parameters.
Then using replmerge.exe i tried to execute the batch file But could not succeed......
Can anyone guide me from the Basics ??? (i knw the Replication Architecture its heirarchy....but have NO idea of performing it Programatically......!!!!!!!!)
by BASICS, i mean......how should i execute the resp. stored procedures with what parametes & the order i should follow in order to successfully pull a merge subscription in SQL server 2000.
if a Sample code is mentioned as example, would be better for me to understand....
Thanking all of you in anticipation...........
Mandar
Hi experts;
I have a problem with unicode character 0x2300
I created this table
create table testunicode (Bez nchar(128))
Insert Data
insert into testunicode (Bez)values('Œ€„¢')
with 2 Unicode characters
Œ€ = 0x2300
„¢ = 0x2122
Selecting the data
select Bez from testunicode
I see
"?„¢"
„¢ = 0x2122 is ok but instead of 0x2300 there is 0x3f
When I modify the insert statement like that ( 8960 = 0x2300 )
insert into testunicode (Bez)values(NCHAR(8960)+'„¢')
and select again voila i see
"Œ€„¢"
Does anyone have an idea?
Thanks
I am trying to 'load' a copy of a SQLServer 2000 database to SQLServer 2005 Express (on another host). The copy was provided by someone else - it came to me as a MDF file only, no LDF file.
I have tried to Attach the database and it fails with a failure to load the LDF. Is there any way to bypass this issue without the LDF or do I have to have that?
The provider of the database says I can create a new database and just point to the MDF as the data source but I can't seem to find a way to do that? I am using SQL Server Management Studio Express.
Thanks!!
I have an app that uses a sqlserver 2000 jdbc driver to connect to a sqlserver 2000.
Is it possible to do a direct replacement of sqlserver 2000 with sqlserver 2005 express just by reconfiguring the app to point to the express? The app would still be using the sqlserver 2000 jdbc driver to try and make the connection.
If that is a possibility, what can be some differences in the configuration? Previously with 2000 the config information I entered is:
server name: "machinename"( or ip). I've also tried "machiname/SQLEXPRESS"
DB name: name of db instance
port: 1433(default)
user and pass.
My attempts so far results in
"java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket."
and
"java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Unable to connect. Invalid URL."
I want to know the differences between SQL Server 2000 storedprocedures and oracle stored procedures? Do they have differentsyntax? The concept should be the same that the stored proceduresexecute in the database server with better performance?Please advise good references for Oracle stored procedures also.thanks!!
View 11 Replies View RelatedHi,
I didn't play around with breakpoints to much, yet. So today I created a package with 2 variables, which both raise their change event. I added a event handler for that just to show the name of the variable which initiated that event (system::variablename) in a messagebox. I added two scripts to the main workflow, one changes one variable, one the other.
To see what's happening I placed a breakpoint on the script in the event handler. I start the package, the first script is executed, the event is fired and the script is started. The breakpoint stops executing the package. So good so far. When I now click on "continue" the script task in the event handler changes to "yellow" and I hear a beep. That's all. I don't see any other action in the package, the second script is not started and the run seams to be locked.
What's wrong? Is the problem sitting in front of the monitor? Am I the 1000th person hitting that bug?
Thanks,
This is a solution for a very specific problem, and it's one that you'll hardly ever use, but it's important to know about that one scenario where it can save your neck. Ordinarily, stored procedures are only recompiled if they're no longer in the procedure cache. But if a stored procedure's execution plan is still in the cache, then SQL Server reuses the compiled storedprocedure and its existing execution plan. This is almost always the best course of action. Almost always, but not always.Sometimes, however, reusing an existing plan doesn't offer the most efficient performance. Imagine, for example, that your stored procedure accepts a parameter that determines the natureof a JOIN operation. The results can vary in a big way, so you wouldn't want your procedure to be locked into an execution plan that might be completely inappropriate for that JOIN. In a highlyspecialized case like this, you might want to force SQL Server to recompile the procedure every time the procedure runs. Doing so comes at a performance cost, but this might be offset by thesavings you gain in not executing the procedure with an awful compiled execution plan. Consider carefully whether to use this approach (or whether to re-engineer the over-design of yourapplication to avoid this situation in the first place). Should you need to instruct SQL Server to recompile each time, add the WITH RECOMPILE directive to the procedure, like this: CREATE PROCEDURE ProcName @Param int /* ... other parameters */ WITH RECOMPILE AS /* ... procedure code follows */
If we omit "WITH RECOMPILE", what will be the consequence? Thanks
I have successfully moved my data from a SQL Server 2000 hosting site to a SQL Server 2005 hosting site. I Made a backup of my database using Enterprise Manager (2000) and imported the database tables using SQL Server Management Studio (2005). I do not know how to move the 25 or so stored procedures that I have in SQL Server 2000. I have a very short amount of time to figure this out and am hoping that someone can give me a brief step by step answer on how to get this done. I would appreciate any information you can provide. Thank you!!
View 5 Replies View RelatedDoes anybody know if the breakpoints are supported in the script component?
I've got a script that I want to debug and make sure it's doing what it should be but everytime I set a breakpoint it loses them when I click ok on the script editor. I've tried setting precompile to false but thats not working. What do I need to do to be able to use breakpoints?
Saitham8
Hi Friends,
Can some please let me know the differences between sqlserver 2000 and sqlserver 7.0
I can not debug any of my scripts. They execute just fine, but if I have a breakpoint set in the script code (in VSA), I get the message:
SQL server integration services script task has encountered a problem and needs to close. We are sorry for the inconvenience.
If you were in the middle of something, the information you were working on might be lost.
Debug Close
When I choose "Close" I get this:
sMicrosoft Visual Studio for Applications has lost the link to .
Your work will be exported to <<my Local Settings My Documents path>> when you quit the application.
OK
When I click "OK" my package executes normally, but no breakpoints will fire from that point on.
In the code behind the Script Transformation component, neither the MsgBox nor any of the breakpoints seem to work. Am I missing to do something in order for these to get executed?
Thanks.
Andy.
Thanks in advance. What is maximum SQL Server database (*.mdf) file size with SQL Server 2000 as part of Microsoft Small Business Server 2000? (Database files were limited to 10 GB in SBS 4.5 with SQLServer 7.0... has this changed?).
View 1 Replies View RelatedHi, I wanted to see what are all the users in a windows nt group that has a group access to sql server 2000. I have a windows 2000 group access to sqlserver 2000 as "xxxsomegroup". How can I list all users that belongs to this windows 200 group? is there any stored procedure to find out this?
any information could be greatly appreciated.
thanks
I recently had to reinstall a new instance of SQLServer 2000, but was unable to use the previous server name. As a result, my Access2000 front end is not happy with it's linked tables. I can't seem to find anyplace within Access to universally change the address of the SQLServer used as the back-end for all linked tables.
When I do try to access the linked tables through Access, I get an error, and the option to change the server location. When I try to type-in the new SQLServer location, there is an attempt to reconnect to SQLServer, but a whole lot of errors are generated, and none of the data is transferred into the Access table.
I really don't want to have to re-do my Access front end, so it seems it would be easiest to somehow reinstall SQLServer to have the same server location it used to. Is there a good way to completely erase all traces of SQLServer so that I can have better luck reinstalling it to the same location it used to be in? Just using the uninstall program from SQLServer doesn't seem to be cutting it.
Thanks!
When I try to make a connection to an Access .mdb I get the following error:
"Unable to open application. The workgroup information file is missing or opened exclusively by another user"
Yet, I am able to open the file through Access and have necessary permissions and I know no one else has it opened. The mdb is password protected and I have provided the correct login information in the DTS connection.
Hi guys,
I have a performance related question about the DTS package in sqlserver 2000 which i have developed
We have developed a DTS package which will migrate a view 'ATTRITION' from Sqlserver 2000 to an Oracle database.The design of the package is as follows
First step: It checks for the existance of the table 'ATTRITION' in oracle database, if table 'ATTRITION' is not there it will create a table called 'ATTRITION' in the oracle db.If the table 'ATTRITION' is already present in the oracle db,then the table is truncated.
Second step: The view 'ATTRITION' is migrated to Oracle table 'ATTRITION'.
For the migration, i have used a connection object which connects to sqlserver 2000 and for oracle connection i have used another connection object 'Microsoft ODBC driver for oracle' and i have joined both the connection objects with 'Transform data task' task which maps one to one from sqlserver 2000 where view 'ATTRITION' exists with oracle database where Table 'ATTRITION' exists.
Roughly i have around 65000 rows in 'ATTRITION' view of sqlserver 2000 which needs to be migrated.When im running the package on my system it takes around 4 minutes to migrate all the rows but when im running it on the server it takes a lot lot of time more than 1 hour.
The view definition im using has more than 10 tables joined together.But if its a problem of query used in the view,and if i run the view seperately it quickly displays the data hardly takes 1 minute. and even if i run the package on my local pc it doenst take much time.Now my confusion is why its taking soo much time on server.If i create a indexed view then will it solve my problem.Please suggest...
Thanks in advance
REgards
Arvind L
Using SQL 2005, SP2. All of a sudden, whenever I create any stored procedures in the master database, they get created as system stored procedures. Doesn't matter what I name them, and what they do.
For example, even this simple little guy:
CREATE PROCEDURE BOB
AS
PRINT 'BOB'
GO
Gets created as a system stored procedure.
Any ideas what would cause that and/or how to fix it?
Thanks,
Jason
How do I search for and print all stored procedure names in a particular database? I can use the following query to search and print out all table names in a database. I just need to figure out how to modify the code below to search for stored procedure names. Can anyone help me out?
SELECT TABLE_SCHEMA + '.' + TABLE_NAME
FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_TYPE = 'BASE TABLE'
Seems like I'm stealing all the threads here, : But I need to learn :) I have a StoredProcedure that needs to return values that other StoredProcedures return.Rather than have my DataAccess layer access the DB multiple times, I would like to call One stored Procedure, and have that stored procedure call the others to get the information I need. I think this way would be more efficient than accessing the DB multiple times. One of my SP is:SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, S.Name AS 'StatusName', S.ItemDetailStatusID, S.InProgress as 'StatusInProgress', S.Color AS 'StatusColor',T.[Name] AS 'TypeName', T.Prefix, T.Name AS 'ItemDetailTypeName', T.ItemDetailTypeID FROM [Item].ItemDetails I INNER JOIN Item.ItemDetailStatus S ON I.ItemDetailStatusID = S.ItemDetailStatusID INNER JOIN [Item].ItemDetailTypes T ON I.ItemDetailTypeID = T.ItemDetailTypeID However, I already have StoredProcedures that return the exact same data from the ItemDetailStatus table and ItemDetailTypes table.Would it be better to do it above, and have more code to change when a new column/field is added, or more checks, or do something like:(This is not propper SQL) SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, EXEC [Item].ItemDetailStatusInfo I.ItemDetailStatusID, EXEC [Item].ItemDetailTypeInfo I.ItemDetailTypeID FROM [Item].ItemDetails IOr something like that... Any thoughts?
View 3 Replies View Related