Broken Link To Chart
Jun 28, 2007
Hi,
I have made a chart that displays data for my company. However, when I have the report.rdl on the "live" serverand use the "live" data source, I can't get the report manager to display the chart, only the famuos x of a broken image link. If I place the report.rdl on the test server and use the "live" data source the chart is displayed.
What is the difference between having the report on the test server versus the "live" server?
Report manager -> report on test server -> live data source = working
Report manager -> report on "live" server -> live data source = no image
I dont think the problem is sequrity related, but I dont know for sure...
Thanks in advance!
Niklas
View 4 Replies
ADVERTISEMENT
Sep 5, 2007
Hi,I am studying data mining features of SSAS and for a workshop I'vecreated 2 views derived from vTargetMail view of AdventureWorksDW.Train data consists every record except those in Pacific, and testview consists only records from Pacific area.1. I've created a mining structure based on Decision Tree and selectedBikeBuyer as predictable column.2. According to input column suggestions, I've selected Age,Eng.Education, NumberCarsOwned, YearlyIncome, CommuteDistance,NumberChildsatHome and TotalChildren as input columns,3. I've modified no other setting, and deployed project.I can get training results in decision tree browser and dependencynetwork (and both seem to give rather logical results) however, when Itry to browse lift chart or classification matrix I get an emptyclass.matr. and a lift chart of a single 45 degree line.Am I missing a step, or must I do some fine-tuning on (what)parameters?Thanks...
View 2 Replies
View Related
Sep 5, 2007
Hi,
I am studying data mining features of SSAS and for a workshop I've
created 2 views derived from vTargetMail view of AdventureWorksDW.
Train data consists every record except those in Pacific, and test
view consists only records from Pacific area.
1. I've created a mining structure based on Decision Tree and selected
BikeBuyer as predictable column.
2. According to input column suggestions, I've selected Age,
Eng.Education, NumberCarsOwned, YearlyIncome, CommuteDistance,
NumberChildsatHome and TotalChildren as input columns,
3. I've modified no other setting, and deployed project.
I can get training results in decision tree browser and dependency
network (and both seem to give rather logical results) however, when I
try to browse lift chart or classification matrix I get an empty
class.matr. and a lift chart of a single 45 degree line.
Am I missing a step, or must I do some fine-tuning on (what)
parameters?
View 3 Replies
View Related
Jan 31, 2007
I have one report "Incident Summary" which has a Report Parameter called DimPoolPool using ParameterValue for Value Field and ParameterCaptionIndented for Label field. The default value is [Dim Pool].[Pool].[All]
From another chart report I want to be able to click on a column to make open the Incident Summary report parameterized by "Pool". So I got to properties of the chart > Data > Values > Edit > Action > Jump to report > Parameter, and here I enter DimPoolPool = Fields!Pool.Value.
It seems to me that this should be picking up [Dim Pool].[Pool].&[poolname] and entering that into the parameters of Incident Summary report. However instead the Incident Summary opens with blank parameter waiting for user to enter.
How do you format parameters correctly between reports?
View 2 Replies
View Related
Mar 26, 2007
Hello All,
I have a reporting services report in the form of a chart. I have two datafields on the chart.
I need to be able to dynamically hide one datafield and view the chart for the other one and vice versa.
How do I do this ?
Any help would be appreciated..
Thanks!
View 4 Replies
View Related
Jul 17, 2014
When I export the report in excel format the chart is displayed as picture. I want it to be displayed as editable chart.Does Office Writer work in this situation and did anyone use Office Writer to accomplish same type of problem.Is there any other method or product we can use instead of the office writer.
View 2 Replies
View Related
Feb 13, 2012
I have a report designed in SSRS 2008 R2.My issue is that the data labels do not stay outside the bars for high values.
View 4 Replies
View Related
Feb 20, 2008
I have created an Access2003 project (existing data) that links to external data. First I connected to a SQL Server 2000 database. Success. Then I tried to set up a Transact SQL data connection to a legacy MDW-secured Access97 database. (A third-party VB6 application goes against it, and we don't have the source code, so we cannot upgrade it.)
The Transact SQL link tests OK but I cannot select any of the tables or queries from the list presented. However, with the same credentials, I can use these same objects in Excel 2003.
When setting up the link in Access2003, I specify JET 4.0 OLE DB Provider, I enter the MDW file on the All tab, a username and a password on the Connection tab where I browse to the MDB file, and specify Shared Deny None on the Advanced tab. When I test the connection, it tests OK ("Test connection succeeded"). Yet on the "Select the Database and Table/Cube which contains the data you want" dialog, "(Default)" appears in the grayed-out dropdown. Then, beneath that dropdown, there is a grid with Name and Description columns. The grid contains query names but the grid is not enabled. The list of queries is this table is grayed out. Neither of the scrollbars works.
BUT... if I use the SAME username and password in Excel2003, and specify the same MDW, there is no problem working with these same database objects in the legacy Access97 database. WHAT IS DIFFERENT ABOUT THE WIZARD IN EXCEL THAT ALLOWS IT TO SUCCEED AND THE WIZARD IN ACCESS THAT CAUSES IT TO FAIL HERE? In Excel, the list of available providers says Microsoft Access Driver, not JET 4.0 OLE DB Provider.
Thanks
TR
View 1 Replies
View Related
Feb 3, 2006
When trying to link to an SQL table in Access 2003, the software appears to be malfunctioning.
The sequence of events is File - Get External Data - Link Tables - Files of Type: ODBC Databases().
The Problem: On two of my computers, the select data source window does not pop up, preventing me from linking to any ODBC data source.
Observations: This function has worked normally in the recent past and works on other computers running Access 2003. One difference between the computers working and non-working computers is Norton Antivirus 2006 (recent upgrade).
Has anyone experienced anything like this? What's going on?
View 8 Replies
View Related
Oct 21, 2015
I need to create a chart with the following features
1) Bar chart that has data for 3 years (3 series)
2) Line chart that has the same data as per the above points on the bar chart but this is a running total. (3 series)
3) These data points are for the 12 months
4) there should be a secondary axis for the cumulative one
Can I create this using the same data set?
View 6 Replies
View Related
Mar 27, 2008
Hi Guys..
i don't know weather is it possible or not..but Can any One tell's me How can i refresh the Chart Values.. acutally what's happening..
i have two Chart in a reprot .. One is Main Category and other one is SubCategory... acutally what i want.. in Main Category chart sum of Quantities of Subcategory values comes in bar or any other format.. and when i click on Main chart any bar it's refresh the other chart and return the result of subcategory under that main category in details...
i don't know is this possible .. acutally i m very new in reproting.. infact that's my first report.. so i want to do this.. if any article or any help anyone can provide me..
Thanks
View 1 Replies
View Related
Sep 14, 2007
Hi,
I am not getting Mining Accuracy Chart and Min ing Model Prediction
Plz tel me how to do.And how to use the filter input data used to generate the lift chart and
select predictable mining model columns to show in the lift chart
View 1 Replies
View Related
Jul 17, 2001
Hi
I have a problem, when i do a select records from the production server which is situated in melbourne,around 20,000 records need to be fetched but sunddenly after 13,000 records the connection is broken
why is this heppening
what is the cause for this
how to overcome this
pls let me know asap with the evidence
thanks
venkat
View 1 Replies
View Related
Jul 23, 2001
Hi ,
I am running a process from from my client having TCP/IP sockets connected to WIN NT sql server 7.0. I get a error msg [MICROSOFT][ODBC SQL SERVER DRIVER][TCP/IP SOCKETS]ConnectionCheckForData (null())).
Connection Broken .
The same thing happened in other NT SQL server as well,but it is ran o.k if i run from the server itself. Checked Microsoft documents they advised me to use Named Pipes and to check the client and server network utility. Check every detail but still facing same errors. Can anyone provide an solution for this.
Thanks,
Venkat.
View 1 Replies
View Related
May 21, 2005
As we have just got SQL at work I had decided to play with SQL on my home computer to find out what made it tick.
I am using the 120 day demo enterprise version. While playing in the user accounts area (under security) I denied access to the database on the guest account (like you disable the guest account on domain logins) and (if you have not guessed already) I can't get access to the server anymore. I did try reinstalling but I guess that there are still some settings in the registry that don't get deleted. Any suggestions how I can get back in.
My PC at home is a XP home edition, no domain etc. SQL was installed onto the PC and I was accessing (playing with it on this PC). The setup I was playing with has no data (except what comes with the SQL) so I am not worried about losing anything.
Thanks in advance
Tim
View 1 Replies
View Related
Dec 6, 2007
Hi All,
When I run this statement it gives me an error.:
CREATE
INDEX [NC_DateAcctTotal] ON [dbo].[BilledPackages] ([pu_date], [acct_no], [delete_flag], [billing_weight_charge])
WITH
FILLFACTOR = 90
ON [PRIMARY]
::::: ERROR ::::
Server: Msg 823, Level 24, State 2, Line 1
I/O error (torn page) detected during read at offset 0x000006d5f2c000 in file 'E:MSSQLDataManagement_Data2_Data.NDF'.
Connection Broken
Thanks!
Aric
View 1 Replies
View Related
Jun 27, 2006
I am trying to set up a filtered paging ObjectDataSource for a gridvoew control.
My code works, my query doesn't...
This is OK: Get all rows of data:
"SELECT UCO, country_code, country_name, enabled, concurrency FROM CountryCodes "
Returns all records as expected
This is OK: Getting rows of data with no Filter:
"SELECT UCO, country_code, country_name, enabled, concurrency FROM (SELECT ROW_NUMBER() OVER (ORDER BY country_name ) As Row, UCO, country_code, country_name, enabled, concurrency FROM CountryCodes ) As TempRowTable WHERE Row >= 0 AND Row <= 10"
Returns expected data
This is OK: Making sure my WHERE filter works:
"SELECT UCO, country_code, country_name, enabled, concurrency FROM CountryCodes WHERE country_name LIKE '%u%' "
Returns 85 records
This is BROKEN!!!: I want to return 10 rows of filtered data:
"SELECT UCO, country_code, country_name, enabled, concurrency FROM (SELECT ROW_NUMBER() OVER (ORDER BY country_name ) As Row, UCO, country_code, country_name, enabled, concurrency FROM CountryCodes ) As TempRowTable WHERE ( Row >= 0 AND Row <= 10 ) AND ( country_name LIKE '%u%' ) "
It Returns 0 records!!!
What am I doing wrong in the last query?
Or even better how do I fix it?
Thanks,
Roger
View 6 Replies
View Related
Mar 8, 2007
Anyone having problems with this forum today?
I have had countless email alerts thru today alerting me to people replying to threads I have commented on. And I can see the person's comments.
1) WhenI click on the link it takes me to a page saying the post doesn't exist
2) When I try and browse to the thread manually I can't see the reply.
3) On one occasion I replied to one of these threads asking if someone had posted something and then deleted it. After I submitted the post I could see all the other posts in the thread which were supposedly missing before. The next time I browse to the thread (in a new browser window) I can't see any of the posts.
BROKEN!!!! I for one won't be coming back here until they fix it. Its pathetic.
I have posted something on the bug report forum by the way.
-Jamie
P.S. Its not just on this forum either.
View 8 Replies
View Related
May 19, 2008
I downloaded and registered Visual Studio Express Edition. I got this nice email back with links to demos, tutorials, and starter kits. Unfortunately, the links to most of the starter kits are broken. Can I still get these things?
View 1 Replies
View Related
Aug 26, 2002
Hi:
While performing a restore, one of the transaction logs was apparently corrupt. So the database gets partially restored with an error saying :
Backup or restore operation successfully processed 1 pages in 0.505 seconds Processed 6 pages for database 'royal', file 'royal_Log' on file 1.
Server: Msg 9004, Level 21, State 2, Line 1
The log for database ' ' is corrupt.
ODBC: Msg 0, Level 16, State 1
Communication link failure
Can anyone give me some tips how to restore? any help appreciated.
bye
Eva
View 1 Replies
View Related
Jul 3, 2007
Hi there, wasn't quite sure where to put this but I still regard myself as a bit of an SQL Server noob so thought it'd be ok here....hopefully?! lol
Right....I have a database called CDR and a Login set up for this on the server called CDMLogin. The CDR database is a non-live backup of another database stored elsewhere. In order to update this for testing purposes I needed to make a backup of the live database and then do a 'restore database' over the top of the old CDR one. This has worked fine before.....however, on this occasion, the link between the CDR database and the CDMLogin appears to have been broken. I have since read about how this can be an issue when restoring databases but I have still not found a fix. Any ideas?
Thanks v much
View 1 Replies
View Related
Dec 5, 2006
Version: Microsoft SQL Server 2000 - 8.00.2040 (Intel X86)
Problem:
Server: Msg 8964, Level 16, State 1, Line 1
Table error: Object ID 515532920. The text, ntext, or image node at page (1:377289), slot 1, text ID 897099563008 is not referenced.
Server: Msg 8964, Level 16, State 1, Line 1
Table error: Object ID 515532920. The text, ntext, or image node at page (1:377447), slot 1, text ID 897100939264 is not referenced.
<... and 4 same errors>
DBCC results for 'CC_Document'.
The repair level on the DBCC statement caused this repair to be bypassed.
<same messages>
The repair level on the DBCC statement caused this repair to be bypassed.
There are 192 rows in 6 pages for object 'CC_Document'.
CHECKTABLE found 0 allocation errors and 8 consistency errors in table 'CC_Document' (object ID 515532920).
repair_allow_data_loss is the minimum repair level for the errors found by DBCC CHECKTABLE (crmproded.dbo.CC_Document repair_fast).
I won't run checktable with 'repair_allow_data_loss' before all records aren't find out
I try run DBCC PAGE on this pages. It print info
PAGE: (1:377289)
----------------
BUFFER:
-------
BUF @0x01249540
---------------
bpage = 0x2928A000 bhash = 0x00000000 bpageno = (1:377289)
bdbid = 8 breferences = 0 bstat = 0x9
bspin = 0 bnext = 0x00000000
PAGE HEADER:
------------
Page @0x2928A000
----------------
m_pageId = (1:377289) m_headerVersion = 1 m_type = 3
m_typeFlagBits = 0x0 m_level = 0 m_flagBits = 0x8000
m_objId = 515532920 m_indexId = 255 m_prevPage = (0:0)
m_nextPage = (0:0) pminlen = 0 m_slotCnt = 2
m_freeCnt = 3742 m_freeData = 4446 m_reservedCnt = 0
m_lsn = (19116:290571:12) m_xactReserved = 0 m_xdesId = (0:0)
m_ghostRecCnt = 0 m_tornBits = 856438469
Allocation Status
-----------------
GAM (1:2) = ALLOCATED SGAM (1:3) = NOT ALLOCATED
PFS (1:372048) = 0x42 ALLOCATED 80_PCT_FULL DIFF (1:6) = NOT CHANGED
ML (1:7) = NOT MIN_LOGGED
Blob fragment at: Page (1:377289) Slot 0 Length: 4266 Type: 3 (DATA)
Blob Id:897099563008
2928A06E: 7fe8108f 64a115ed 245a1a1a b68e502c .......d..Z$,P..
<blob fragment ... >
2928B0FE: 00006278 00006e87 00007ad1 xb...n...z..
Blob fragment at: Page (1:377289) Slot 1 Length: 84 Type: 4 (LARGE_ROOT_2)
Blob Id: 897099563008 Level: 0 MaxLinks: 5 CurLinks: 5
Child fragment at Page (1:377237) Slot 0 Offset: 8080
Child fragment at Page (1:377238) Slot 0 Offset: 16160
Child fragment at Page (1:377239) Slot 0 Offset: 24240
Child fragment at Page (1:377288) Slot 0 Offset: 32320
Child fragment at Page (1:377289) Slot 0 Offset: 36572
There are 5 links at Slot 1 , that's generate error. But why? What does it mean - "The text, ntext, or image node at page (1:377289), slot 1, text ID 897099563008 is not referenced" ???
I saw other pages (not 'broken') - there is: Blob Fragment don't contains links - links are in other pages.
What are these 'broken' records in my example - they are chunks of lost information, that i can't recover?
Or not? May be exists a way, that i find all 'broken' records? Because, my table contains 192 records. But there is BLOB field - and i can't check consistency of every file, that uploaded in my table. In addition I will fully appreciate this problem.
At last, if i find record, i run checktable with repair_allow_data_loss, then upload file again.
p.s. These errors contained in backup too.
View 7 Replies
View Related
Feb 15, 2007
I have a SSIS which have a user string variable named connectionstring. In the package definition it has empty value. But in my package.dtsconfig file I set the value of this variable.
But I am not getting the value inside a script component. I tried debugging with a msgbox echoing the variable value ... but I see only empty value i.e. at runtime the value is not being read from config file
What can be wrong here?
next if I put the value ("Data Source=<Server>;Initial Catalog=<Database>;Integrated Security=True;") in the variable definition itself I get the following error
[Execute SQL Task] Error: Failed to acquire connection "<ADO Connection>". Connection may not be configured correctly or you may not have the right permissions on this connection.
The SSIS was running fine previously ... it broke after I updated by machine with the latest windows updates today.
I am working on a 64 bit Windows 2003 SP1 Server box with Visual Studio 2005 SP1, SQL Server 2005 SP1
View 3 Replies
View Related
Apr 12, 2008
Hi,
Our vertical market applicaiton uses connection strings to connect to SQL 2005.
.NET 2.0 SP1 was auto updated on one of our machines
Connection strings are now failing (doesn't return -1 but doesn't connect).
Can anyone help?
I'm really nervoust that on Monday 1200 angry customers are going to call.
View 7 Replies
View Related
Feb 5, 2003
Hi guys,
Running a clustered webserver, windows 2000, IIS v5, and a sql server, v2000. Using OLE Db as connection, running stored procedures, no sql created on the fly. The website handles about 5000 transaction a day.
Every now and again, we get a problem whereby an error 41 - Broken Pipe is reported. I can't find any info on this error on Technet, MSDN, etc. Google returns info, but only really affecting solaris, unix, linux, etc.
Anyone ever come across this error before? or know what might cause it? and possible resolutions?
View 2 Replies
View Related
May 18, 1999
see article: Article ID: Q216700 .
Within a trigger on SQL Server 6.5 Service Pack 5 or 5a, the IF UPDATE clause will evaluate to true for all columns when an INSERT is performed, even if there is no value specified and no default value exists for the column
http://support.microsoft.com/support/kb/articles/q216/7/00.asp
View 2 Replies
View Related
Dec 8, 2005
I'm using Crystal 9 with SQL Server database. I have a report that was working fine for the first 8 months. As soon as I add another month, the report fails. I've tried different setting in my indexes with different variations of periods. The minute I have over 8 periods included, the report fails. No errors, just no data. I don't even have a clue where to look for possible answers on the Internet.
Can any one help or direct me to some resources??
Thanks,
Debbie
View 4 Replies
View Related
Nov 28, 2013
Aim – Calculate the number of days between CreatedDate and [Date_Docs_In_Complete__c],count how many Ids, Fall within a specific month by year, and then work out the avg number of days it took for each month
My query so far
select
ID,
left(CreatedDate,10) as CreatedDate,
left([Date_Docs_In_Complete__c],10) as [Date_Docs_In_Complete__c],
DATEDIFF(day,CreatedDate,[Date_Docs_In_Complete__c]) as Days
from #build
Produces following results
IDCreatedDateDate_Docs_In_Complete__cDays
0063000000ausKGAAY2010-03-262013-07-161208
0063000000mC359AAC2011-06-302013-07-03734
0063000000oyaSPAAY2011-11-292013-07-18597
Desired outcome results would be
Year Month Date_Docs_In_Complete__c Total Days Avg_Days
2013 07 3 2539846.3
View 2 Replies
View Related
Nov 2, 2007
Hi everyone,
Is there somewhere that I can change the links that are included in subscription emails? The link that goes out is incorrect because the port number of the server is not included in the link, so I'd like to edit this. Does anyone know where this can be done? Thank you!
-Keith
View 1 Replies
View Related
Oct 6, 2006
Hi to all,
I'm having serious problem with SSIS on my development machine.
each time I try to add a new Connection manager i got this error :
TITLE: Microsoft Visual Studio
------------------------------
The new connection manager could not be created.
------------------------------
ADDITIONAL INFORMATION:
The connection manager 'OLEDB' is not properly installed on this computer. (Microsoft.DataTransformationServices.Design)
This happen for any type of Connection Manager, ADO.NET, FILE,SMTP. I've already tried to uninstall SSIS , but nothing change.
I've any chance to get this problem solved?
Thanks in advance
View 2 Replies
View Related
Feb 13, 2007
Hi,
I was trying to download SQL Server Management Studio Express from http://msdn.microsoft.com/vstudio/express/sql/download/default.aspx. The links on this page seem to be broken.
I tried to download the Mgmt Studio Express by clicking on a link that points to http://go.microsoft.com/fwlink/?LinkId=65110.
Anyone else facing this issue? Is there another place I can get SQL Server Management Studio Express from?
View 10 Replies
View Related
Jul 31, 2007
Hi,
I was wondering what the best way was to deal with subscriptions breaking due to an empty table. I have subscriptions that people have scheduled to go out daily, but on certain days the table may be empty, in this case the subscription doesn't read the parameters for the report and then the subscription breaks.
My original solution involved creating a #temp table with the same columns as the original table and inserting one row into it which I'd union with the original table, this row in the temp table had all its values set to 0. The solution worked when I ran it in SQL Server Management Studio but it seems SRS doesn't like the INSERT INTO statement, which is the error I get, but I've read on these forums that it doesn't like #temp tables either. I proceeded to use a stored procedure with all the code in it, but I might have trouble filtering on multi value parameters, because at times these parameter lists get real big, plus I have to do this for multiple reports and don't want to get into creating stored procedures for each report.
Following is what the code I used look something like that executes and does the job in Management Studio but not SRS. I'm mainly just looking for the easiest and cleanest way to do this, since it'll have to be done across multiple reports, so disregard the code if there's an easier way to do it. Thanks in advance.
create table #dummytable
(
name varchar(35),
country varchar(35),
idnumber (int)
)
GO
insert into #dummytable (name),values('0');
select name, country, idnumber
from originaltable
where name in (@name)
union
select name = 0, country = 0, idnumber = 0
from #dummytable
drop #dummytable
View 4 Replies
View Related
Oct 10, 2006
The execution instance guid appears to be broken in SSIS (post SP1 hotfix is the version for this test). The package itself reports a different value at runtime than management studio does via RunningPackages.
One package execution reports two guids depending on where look. The issue is not with the PackageID or VersionGUID, but the actual runtime guid, available in the package as the system variable "System::ExecutionInstanceGUID".
ExecutionGuid via System::ExecutionInstanceGUID as reported by package script task:
C825418B-E796-4EBF-BEB8-14CBEC257D81
ExecutionGuid reported by /CONSOLELOG command line parameter to dtexec
C825418B-E796-4EBF-BEB8-14CBEC257D81
ExecutionGuid reported by SSIS Log Provider for text files:
C825418B-E796-4EBF-BEB8-14CBEC257D81
ExecutionGuid Reported by Management Studio Running Packages Node:
4810b482-6a83-4564-8b3b-c5017a590506
ExecutionGuid reported in MsDtsSrvr.exe:
4810b482-6a83-4564-8b3b-c5017a590506
ExecutionGuid reported by GetRunningPackages():
4810b482-6a83-4564-8b3b-c5017a590506
All the gory details are below:
Text Log:
#Fields: event,computer,operator,source,sourceid,executionid,starttime,endtime,datacode,databytes,message
OnPreValidate,JAEGD,FPSjaegd,EventGuidTest,{435383C9-F9CA-463D-8A94-F654975B5D2D},{C825418B-E796-4EBF-BEB8-14CBEC257D81},10/9/2006 9:30:54 PM,10/9/2006 9:30:54 PM,0,0x,(null)
OnPostValidate,JAEGD,FPSjaegd,EventGuidTest,{435383C9-F9CA-463D-8A94-F654975B5D2D},{C825418B-E796-4EBF-BEB8-14CBEC257D81},10/9/2006 9:30:54 PM,10/9/2006 9:30:54 PM,0,0x,(null)
PackageStart,JAEGD,FPSjaegd,EventGuidTest,{435383C9-F9CA-463D-8A94-F654975B5D2D},{C825418B-E796-4EBF-BEB8-14CBEC257D81},10/9/2006 9:30:54 PM,10/9/2006 9:30:54 PM,0,0x,Beginning of package execution.
Diagnostic,JAEGD,FPSjaegd,EventGuidTest,{435383C9-F9CA-463D-8A94-F654975B5D2D},{C825418B-E796-4EBF-BEB8-14CBEC257D81},10/9/2006 9:30:54 PM,10/9/2006 9:30:54 PM,0,0x,Based on the system configuration, the maximum concurrent executables are set to 3.
OnPreExecute,JAEGD,FPSjaegd,EventGuidTest,{435383C9-F9CA-463D-8A94-F654975B5D2D},{C825418B-E796-4EBF-BEB8-14CBEC257D81},10/9/2006 9:30:54 PM,10/9/2006 9:30:54 PM,0,0x,(null)
OnInformation,JAEGD,FPSjaegd,EventGuidTest,{435383C9-F9CA-463D-8A94-F654975B5D2D},{C825418B-E796-4EBF-BEB8-14CBEC257D81},10/9/2006 9:30:54 PM,10/9/2006 9:30:54 PM,0,0x,LineageID: LineageId
OnInformation,JAEGD,FPSjaegd,EventGuidTest,{435383C9-F9CA-463D-8A94-F654975B5D2D},{C825418B-E796-4EBF-BEB8-14CBEC257D81},10/9/2006 9:30:54 PM,10/9/2006 9:30:54 PM,0,0x,Attempting to sleep ...
Console Log:
Log:
Source Name: Sleep
Source GUID: {A367974F-1C2F-4D8B-9F8B-79B1B9AD854E}
Execution GUID: {C825418B-E796-4EBF-BEB8-14CBEC257D81}
Message: ExecutionInstanceGUID => {C825418B-E796-4EBF-BEB8-14CBEC257D81}
Start Time: 2006-10-09 21:33:40
End Time: 2006-10-09 21:33:40
Output System::ExecutionInstanceGUID via Dts.Log()
C825418B-E796-4EBF-BEB8-14CBEC257D81
Management studio Integration Services Running Packages Node:
Package Name ExecGuidTest
Executed By FPSjaegd
Execution Instance ID 4810b482-6a83-4564-8b3b-c5017a590506
Execution Started 10/9/2006 9:30:54 PM
Execution Duration 213542
Package ID 435383c9-f9ca-463d-8a94-f654975b5d2d
Value logged by msdtssrvr.exe:
Registering package ExecGuidTest (435383c9-f9ca-463d-8a94-f654975b5d2d) for FPSjaegd, assigned ID 4810
b482-6a83-4564-8b3b-c5017a590506
Package ExecGuidTest (435383c9-f9ca-463d-8a94-f654975b5d2d) registered by FPSjaegd, assigned ID 4810b4
82-6a83-4564-8b3b-c5017a590506
Value available via GetRunningPackages()
GAC Version Location
--- ------- --------
True v2.0.50727 C:WINDOWSassemblyGAC_MSILMicrosoft.SqlServer.ManagedDTS9.0.242.0__89845dcd8080cc91Micros...
InstanceID : 4810b482-6a83-4564-8b3b-c5017a590506
UserName : FPSjaegd
PackageDescription :
PackageName : ExecGuidTest
PackageID : 435383c9-f9ca-463d-8a94-f654975b5d2d
ExecutionStartTime : 10/9/2006 9:30:54 PM
ExecutionDuration : 136388
Powershell script is as follows:
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.ManagedDTS")
$a = New-Object Microsoft.SqlServer.Dts.Runtime.Application
$a.GetRunningPackages("localhost")
View 6 Replies
View Related
