In profiler i see next error:
"The message could not be delivered because it could not be classified. Enable broker message classification trace to see the reason for the failure."
Where and what should I enable? I enabled all in "Broker event category" of the profiler.
Thanks
Hello,
Has anyone seen this in profiler? I have two brokers on different servers with one of them being the initiator. All messages end up sitting in the initiator's transmission queue. Profiler on the target broker's machine displays this for every attempt to send by the initiator:
A corrupt message has been received. The End of Conversation and Error flags may not be set in the first sequenced message. This occorred in the message with Conversation ID '...', Initiator: 1, and Message sequence number: 0
In case it's relevant encryption is disabled and endpoints on both servers use windows authentication.
Any hints are greatly appreciated.
Regards,
Svega
Hi,
I have a small problem with my two databases ( A and B ).
On database A I have a queue set up for receiving messages from a service broker which are sent via a stored procedure from database B ...
Each time a message hits the queue on database A I would like to run a stored procedure that takes the message and actions it.
I have my stored procedures in place but can't figure out how to trigger a procedure each time a message is received. I have read this ( http://technet.microsoft.com/en-us/library/ms171601.aspx ) but would really appreciate someone posting an example of setting up queue activation.
Many thanks
Chris
I have an app receiving messages from SQL Service Broker when data is updated. (Messages are located at http://msdn2.microsoft.com/en-us/library/system.data.sqlclient.sqlnotificationinfo.aspx )
When I run this app against a remote SQL Server, I receive the message "Updated" which I expect.
But when I run the same app against the local machine SQL Server, I receive the message "Options".
Does anyone know if there are SQL Server options that must be set to certain values?
I can't seem to find anything that troubleshoots this message... either from a SQLServer- or a .NET standpoint.
How do you set up the service broker to process an email message, and how do you format that message and send it to the que.
Can the service broker alos process an html form from a que.
Thanks
Hi All,
I want to send notification to SSRS on change in database for that I am using SSB to send message to SQL Server Reporting Services.
Can I use SSB and if yes, how? Please guide me I am new to this.
Thanks,
Omkar.
One of my customers' SQL Server 2005 databases, which was set up to receive messages from another SQL Server 2005 database on another server has been re-installed by the customer and now the message passing no longer works. After recreating the End Point and re-enabling the Service Broker on the target database, I am now getting messages in the SQL Server error log.
An error occurred in the service broker message dispatcher, Error: 15581 State: 3.
and
Error: 9644, Severity 16, State: 14.
The two errors repeat alternately ad nauseum.
Running a trace on the target database server, for the Broker:Message Undeliverable, gives an endless stream of these entries:
This message could not be delivered because an internal error (code 15581, state 3) was encountered while processing it. Check the error log for more information.
Any ideas on how to fix this system?
Hi,
I am using service broker in between two database servers. following is the way i am sending and receiving messages
Send
BEGIN TRAN
BEGIN DIALOG CONVERSATION @handle
FROM SERVICE @SendService
TO SERVICE @ReceiveService
ON CONTRACT @Contract
WITH LIFETIME = @lifetime;
SEND ON CONVERSATION @handle
MESSAGE TYPE @xmlMessageType(@xmlMessage);
COMMIT
Receive
BEGIN TRAN;
RECEIVE TOP(1) @xmlMessage = message_body,
@handle = conversation_handle,
@message_type = message_type_name
FROM TransactionQueue;
----------------------------------------------------------------------------------------------------
-- Check to make sure a message was returned to process. In theory this should never happen.
----------------------------------------------------------------------------------------------------
IF @@rowcount = 1
BEGIN
IF @message_type = 'http://schemas.microsoft.com/SQL/ServiceBroker/EndDialog'
BEGIN
END CONVERSATION @handle;
COMMIT
RETURN 0
END
IF @message_type = N'http://schemas.microsoft.com/SQL/ServiceBroker/Error'
BEGIN
RAISERROR(N'Received error %s from service [Target]', 10, 1)
END CONVERSATION @handle;
COMMIT
RETURN 0
END
SET @sql = 'EXEC '+@message_processor_name+' @xml'
BEGIN TRAN
EXEC sp_executesql @sql, N'@xml XML', @xml=@xmlMessage
COMMIT TRAN
END CONVERSATION @handle;
END
COMMIT
I see Messages are delivered to the target every thing working fine other than following errors which i am seeing in profiler.
1) "This message could not be delivered because the conversation endpoint has already been closed." I see this error on initiator end. Is it like ending conversation on initiator end when i get "EndDialog" send an acknowledgement, which cannot be recieved by target as it has already ended conversation.
2) "An error occurred while receiving data: '64(The specified network name is no longer available.)'." I don't have much idea about the reason for this error. But in profiler i see value for GUID is different for this error and the real message.
Let me know if you need any other information
I've got a situation where I want to put request message on a queue. Because starting a conversation is the only way to put messages on a queue I have to start a conversation with myself. So my Begin Dialog Statement looks something like this:
DECLARE @conversation_handle UNIQUEIDENTIFIER;
BEGIN DIALOG CONVERSATION @conversation_handle
FROM SERVICE [ServiceName1]
TO SERVICE 'ServiceName1'
ON CONTRACT [ContractName1]
WITH ENCRYPTION = OFF;
SELECT @conversation_handle AS ConversationHandle
I haven't noticed any problems with doing this but I wanted to know if there was anything wrong with it. Does someone know what problems this might cause?
I was trying to send a message on a different instance in the network using service broker. I have created the endpoint and route both the side. I could see that the messages are in the transmission_queue in the sender side with no error in the status.
What could be the reason.
I am doing the following:
CREATE ROUTE inst02
WITH
SERVICE_NAME = 'SERVICE2',
ADDRESS = 'tcp://10.14.43.149:2341'
in the send script i am using this:
BEGIN DIALOG CONVERSATION @dialog_handle
FROM SERVICE [SERVICE1]
TO SERVICE 'SERVICE2'
ON CONTRACT [MainContract] WITH ENCRYPTION = OFF ;
in the sending side if i change the endpoint's authentication as windows kerberos , then i get thefollowing error in the transmission queue:
"Connection handshake failed. An OS call failed: (8009030e) 0x8009030e(No credentials are available in the security package). State 66."
I also have given access to the remote user on this endpoint(on the recever side) using this :
GRANT CONNECT ON ENDPOINT::Endpoint_test to paras
I am executing the sending side send script using the same user wich has access to the remote endpoint.
Can some one resolve this issue.
Thanks
when ever I send my message thru Service Broker I am getting an error message like this "
"Dialog security is not available for this conversation because there is no remote service binding for the target service. Create a remote service binding, or specify ENCRYPTION = OFF in the BEGIN DIALOG statement."
This I found in sys.transmission_queue
Please reply with your comments
I am trying to send a message between to SQL Server 2005 instances on two different machines. I have checked all my routes and all my objects appear to be setup correctly. However, when running Profiler on the target machine, I receive the "This message has been dropped because the TO service could not be found. Service name: "[tcp://mydomain.com/TARGET/MyService]". Message origin: "Transport". This is my activated stored procedure that is sending the message to the target service. I am using certificate security. Any help appreciated....
CREATE PROCEDURE [usp_ProcessMessage]
AS
BEGIN
SET NOCOUNT ON;
DECLARE @conversation_handle uniqueidentifier
DECLARE @message_body AS VARBINARY(MAX)
WHILE (1=1)
BEGIN
BEGIN TRANSACTION;
WAITFOR(RECEIVE TOP (1)
@conversation_handle = conversation_handle,
@message_body = message_body
FROM [tcp://mydomain.com/INITIATE/MyQueue]
), TIMEOUT 1000;
IF (@@ROWCOUNT = 0)
BEGIN
COMMIT;
BREAK;
END
END CONVERSATION @conversation_handle
IF @message_body IS NOT NULL
BEGIN
BEGIN DIALOG CONVERSATION @conversation_handle
FROM SERVICE [tcp://mydomain.com/INITIATE/MyService]
TO SERVICE '[tcp://mydomain.com/TARGET/MyService]'
ON CONTRACT [tcp://mydomain.com/INITIATE/MyMessage/v1.0]
WITH ENCRYPTION = ON, LIFETIME = 600;
SEND ON CONVERSATION @conversation_handle
MESSAGE TYPE [tcp://mydomain.com/TARGET/VisitMessage]
(@message_body);
END
COMMIT;
END
END
GO
My endpoints are created like so:
CREATE ENDPOINT MyEndpoint
STATE = STARTED
AS TCP
(
LISTENER_PORT = 4022
)
FOR SERVICE_BROKER (AUTHENTICATION = CERTIFICATE MasterCertificate)
GO
GRANT CONNECT TO CertOwner
GRANT CONNECT ON ENDPOINT::MyEndpoint TO CertOwner
GO
And my routes like so:
GRANT SEND ON SERVICE::[tcp://mydomain.com/INITIATE/MyService] TO CertOwner
GO
CREATE REMOTE SERVICE BINDING [MyCertificateBinding]
TO SERVICE '[tcp://mydomain.com/TARGET/MyService]'
WITH USER = CertOwner,
ANONYMOUS=OFF
CREATE ROUTE [tcp://mydomain.com/INITIATE/MyRoute]
WITH SERVICE_NAME = '[tcp://mydomain.com/TARGET/MyService]',
BROKER_INSTANCE = N'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx',
ADDRESS = N'TCP://xxx.xx.xx.xx:4022'
GO
Is there a way to export the classification matrix in the mining accuracy tab?
View 3 Replies View RelatedHello --I think this is the term for what I want (something that could be generatedin ACCESS using a pivot table, or, maybe Yukon).We have data for sales by sales people in sales regions. More than oneperson sells in a region.We want to display data as follows:salesperson's names----------- ----------- ----------- ----------- ----------- -----------region 1region 2 row/column values are sales amounts for person inthat regionregion 3We will add a WHERE clause for the period of time covered.I don't want to have to change the query if a new salesperson or new regionis added.Can this be done in SQL Server 2000, Analysis Services, OLAP, anywhere?Can someone direct me to examples of how to do this?Thanks for any direction.Larry Mehl
View 2 Replies View RelatedAny ideas on why I get this message in the transmission status:
Classification has been delayed because the routing information is currently being updated.
I did create/drop some routes because I had pointed them to the wrong service, but that was some time ago.
I also just tried to restart the sql instance and it hung on stopping so I'm assuming something with the routing caused the issue.
Any ideas?
Thanks.
Hi,I am studying data mining features of SSAS and for a workshop I'vecreated 2 views derived from vTargetMail view of AdventureWorksDW.Train data consists every record except those in Pacific, and testview consists only records from Pacific area.1. I've created a mining structure based on Decision Tree and selectedBikeBuyer as predictable column.2. According to input column suggestions, I've selected Age,Eng.Education, NumberCarsOwned, YearlyIncome, CommuteDistance,NumberChildsatHome and TotalChildren as input columns,3. I've modified no other setting, and deployed project.I can get training results in decision tree browser and dependencynetwork (and both seem to give rather logical results) however, when Itry to browse lift chart or classification matrix I get an emptyclass.matr. and a lift chart of a single 45 degree line.Am I missing a step, or must I do some fine-tuning on (what)parameters?Thanks...
View 2 Replies View RelatedHi,
I am studying data mining features of SSAS and for a workshop I've
created 2 views derived from vTargetMail view of AdventureWorksDW.
Train data consists every record except those in Pacific, and test
view consists only records from Pacific area.
1. I've created a mining structure based on Decision Tree and selected
BikeBuyer as predictable column.
2. According to input column suggestions, I've selected Age,
Eng.Education, NumberCarsOwned, YearlyIncome, CommuteDistance,
NumberChildsatHome and TotalChildren as input columns,
3. I've modified no other setting, and deployed project.
I can get training results in decision tree browser and dependency
network (and both seem to give rather logical results) however, when I
try to browse lift chart or classification matrix I get an empty
class.matr. and a lift chart of a single 45 degree line.
Am I missing a step, or must I do some fine-tuning on (what)
parameters?
Hi,
I am struggling with the position SSB could take in an SOA. If I would want a broker in the general sense, meaning an intermediary sitting between applications which exchange information through messaging, would SSB be a good candidate? I know Biztalk is probably the primary candidate, but in my scenario I would end up with Biztalk apps with empty orchestrations. Also, I think Biztalk is more expensive to manage. So I am looking for a lightweight broker for a simple SOA targeted at application interoperability, no fancy business processes in sight.
I look forward to some responses.
Kind regards,
Neeva
managed plug-in framework that's available for download here: http://www.microsoft.com/downloads/details.aspx?familyid=DF0BA5AA-B4BD-4705-AA0A-B477BA72A9CB&displaylang=en#DMAPI.
This package includes the source code for a sample plug-in algorithm written in C#.
in this source code all .cs files are modified for clustering algorithm
if my plugin algorithm is of association or classification type then what modifications are requried in source code???
How to prevent the hang on the initator service broker if the target service broker is not started?
Our case has two service brokers (two databases), sometime, the target is need to turn off. But the sitation is the initator service broker (in fact, the message is sent from triggers) become hang, I want to prevent this case and continue to operation, and the messages should queue and will continue to send to target service broker when it startup. How should I do?
Hello, I receive this error "The SQL Server Service Broker for the current database is not enabled, and as a result query notifications are not supported. Please enable the Service Broker for this database if you wish to use notifications." I attach the database in Management Studio to query and enable the broker using the scrip below but to no avail. ALTER DATABASE DataName SET ENABLE_BROKER ‘''<<------successfulandSELECT is_broker_enabled FROM sys.databases WHERE name = 'Database name' ‘'''<<-------value is 1 Global.asax ... Sub Application_Start(ByVal sender As Object, ByVal e As EventArgs) System.Data.SqlClient.SqlDependency.Start(ConfigurationManager.ConnectionStrings("dataConnectionString1").ConnectionString) End Sub...Web.config ... <connectionStrings> <add name="dataConnectionString1" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|jbp_data.mdf;Integrated Security=True;User Instance=True" providerName="System.Data.SqlClient" /> <add name="ASPNETDBConnectionString" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|ASPNETDB.MDF;Integrated Security=True;User Instance=True" providerName="System.Data.SqlClient" /> </connectionStrings>... Hope you could help. cheers,imperialx
View 1 Replies View RelatedIn my SQL Server, I see the below message in the Application Event Viewer
"18265 :
Log backed up: Database: HSD, creation date(time): 2007/01/06(05:05:05), first LSN: 1439:495055:1, last LSN: 1439:496675:1, number of dump devices: 1, device information: (FILE=1, TYPE=DISK: {'D:MSSQLBACKUPHSDHSD_tlog_200707141300.TRN'})."
When I save the application event viewer and open it in another server, I do not see the above message, instead I get the following message:
" Can't find or load message DLL. Message DLL must be in path or in current directory."
Any thoughts to overcome this problem is appreciated.
Thanks
Santhosh
I run SB between 2 SQL servers. In profiler on an initiator side I see next error: 'This message could not be delivered because its message timestamp has expired or is invalid'. For the conversation we use best practice, i.e. target closes a conversation. Target side succeed to close conversation, but initiator still stay in DO (disconnect_outbound).
What is a reasone for the error? What to do?
I see in profiler this error: "This message could not be delivered because its message timestamp has expired or is invalid"
What is a reason for error?
Hello,
I am having trouble specifying a message body that is valid. I mean for the client to send. If I leave it as null then everything is ok but if I create a memorystream and add a line of text it reports back it did not pass validation. I do not understand this and am not sure what to do. I need to send a message based on a code and text but do not know the format of the body that is allowed. The code I am refering to comes out of HelloWord_CLR because that is what I am formating my sample after. I call it the same way it calls the return message done in ServiceProc. I need to know the message format including body since this does not seem to work. A sample of the call is bellow.
// Create an empty request message
string Msg = "Hello";
MemoryStream body = new MemoryStream(Encoding.ASCII.GetBytes(Msg));
Message request = new Message("Request", body);
Thanks,
Scott Allison...
I couldn't find a "sql trace" utility like in sql 6.5... Does anybody know how/if I can do this?
View 2 Replies View Relatedif i dont use the trace to record all the sql transaction. and someone execute the delete command to delete one of the table (ofcourse the person have high enough permissions to do that). is there anyway i can find out who that user's ID is to run the deleted ?? Thanks:D :p
View 2 Replies View RelatedHi,
I'm trying to debug a vendor package and would like to turn on JDBC trace (either client or server side). The only information I found is DBCC TRACE which seems not very useful (I even don't know where the trace result located). Any help is appreciated!
Env: Windows Server 2003 & SQL Server 2000 8.00.818.
Jeff Li
Guys,
How to trace/find out some one has dropped a database from my QA environment? Unfortunately we havent enabled the trace on this server.
We havent find any useful information from SQL Server logs also.
Can any one reply me how to find the details of who dropped the DB, when? is there any query/SP/command/tools avaialble?
Regards
BSR
With Regards
BSR
hi all..
i have 2 tbl..
-- Prepare sample data
DECLARE@tbl1 TABLE (box varchar(10), loc varchar(5) )
INSERT@tbl1
SELECT'P1', 'aa' UNION ALL
SELECT'P1', 'bb' UNION ALL
SELECT'P1', 'aa' UNION ALL
SELECT'P3', 'cc'
DECLARE@tbl2 TABLE (box varchar(10), loc varchar(5) )
INSERT@tbl2
SELECT'P1', 'aa' UNION ALL
SELECT'P3', 'cc'
--expected result
SELECT 'P1' as box, 'aa' as Location, 'aa' as HeaderLoc UNION ALL
SELECT 'P1' as box, 'bb' as Location, 'aa' as HeaderLoc
how do i trace from @tbl1, that has 1 Box with more than 1 Location?
in this case P1 has 2 distinct location (aa & bb).. and left join in the loc from @tbl2 just to retrieve the loc for that box..
~~~Focus on problem, not solution ¯(º_o)/¯ ~~~
How do you set up the trace in SQL?
thanks
sorry, I am an Oracle guy trying to learn SQL
Hello:I am working with SQL Server 2000. I have a stored procedure that creates 3temporary tables (#temp1, #temp2, #temp3). When I view the trace of thestored procedure I see entries that have Object Created #temp1, ObjectCreated #temp2, Object Created #temp3. How can I fix the trace so it doesnot report any objects that get created in the tempdb.Any help will be appreciated.Alee
View 1 Replies View RelatedWhen we enable tracing for a web application where exactly the file or content of the file "Trace.axd" saves?
View 4 Replies View Related