Buffer Size Not Specified Error
Jul 13, 2006
Error: "The specified buffer size is not valid. [buffer size specified = 0]
Hello, im very new to SQL 2005 everywhere but looked like it could do the job for what i needed:
Im working on a c# (.net 2.0) project and loaded data
(one column from one table, 800 rows, text, no greater than 80characters in length)
from an access db into a data set, then lnserted the data in SQLce, great it works fab!
but as soon as I select another field(text, <=10) from the access db, and try to insert it into sql i get the error...
what have i missed???
View 3 Replies
ADVERTISEMENT
Apr 18, 2012
I encountered the following error while attempting to preview an RDL report I was developing in VS2010 using SSDT:"The size necessary to buffer the XML content exceeded the buffer quota"
View 3 Replies
View Related
Oct 7, 2015
We have a set of reports with same header section in all the reports. So while developing a new report i used to copy that header section to the new report with same dataset names (without any change) , but while rendering the report it is throwing error " The size necessary to buffer the XML content exceeded the buffer quota".
View 2 Replies
View Related
Oct 4, 2005
Hi,
I’m attempting to use DTS to import data from a Memo field in MS Access (Jet 4.0 OLE DB Provider) into a SQL Server nvarchar(4000) field. Unfortunately, I’m getting the following error message:
Error at Source for Row number 30. Errors encountered so far in this task: 1.
Data for source column 2 (‘Html’) is too large for the specified buffer size.
I also get this error message when attempting to import the same data from Excel.
Per the MS Knowledgebase article located at http://support.microsoft.com/?kbid=281517, I changed the registry property indicated to 0. This modification did not help.
Per suggestions in other SQL Server forums, I moved the offending row from row number 30 to row number 1. This change only resulted in the same error message, but with the row number indicated as “Row number 1�. (Incidentally, the data in this field is greater than 255 characters in every row, so the cause described in the Knowledgebase article doesn’t seem to be my problem).
You might also like to know that the data in the Access table was exported into this table from a SQL Server nvarchar(4000) field.
Does anybody know what might trigger this error message other than the data being less than 255 characters in the first eight rows (as described in the KB article)?
I’ve hit a brick wall, so I’d appreciate any insight.Thanks in advance!
View 9 Replies
View Related
Apr 28, 2006
Hi
I have a master package that executes a series of sub packages run from a SQL Agent job. One of those sub packages has been stable for a week, running at least once per day, but it just failed despite having been run once already today with the same set of input data.
There were a series of errors showing in the event log for the Execute Package Task starting with "Buffer Type 15 had a size of 0 bytes.", then "The buffer manager failed to create a new buffer type.", then "The Data Flow task cannot register a buffer type. The type had 32 columns and was for execution tree 3.", then "The layout failed validation." and finally "Error 0xC0012050 while loading package file "C:[Package].dtsx". Package failed validation from the ExecutePackage task. The package cannot run.".
SQLIS.com reports the constant for the error code as DTS_E_REMOTEPACKAGEVALIDATION ( http://wiki.sqlis.com/default.aspx/SQLISWiki/0xC0012050.html ).
I then ran the package on my dev machine in BIDS and it worked fine, so I re-ran the job on the server and this time that package executed ok, but another one fell over but did not put anything in the event log.
Does any one have any idea what happened?
TIA . . . Ed
View 2 Replies
View Related
Jul 20, 2005
Hi thereAnybody know how to increase the MS SQL server buffer size?I get an error when trying so insert some pictures as OLE objects. Whentransfering to the server i get an error, that the buffer sizes needs tobe increased.RegardsRudi W.
View 1 Replies
View Related
May 24, 2006
Hi
I've been searching this site and the Web for info on an error message I get when importing from Access 2003 into SQL Server 2000.
'Data for Source Column 3('Col3') is too large for the specified buffer size'
A memo field in Access is larger than 255.
I have followed advice about putting the field to the first column. This doesn't work - the error just returns the new column number. In fact, I've tried just importing the first column - no good.
I am wary about making Registry changes as comments on the Web say this doesn't work either.
Does anybody have the solution for this.
Paul
View 6 Replies
View Related
Feb 11, 2004
Is it possible to change the command buffer size??
I need to export data on demand to an excel spreadsheet via a stored procedure. The only way I know how to do this is through a bulk copy command; but my query is much to big for the buffer....
Thanks!!!
View 9 Replies
View Related
Oct 19, 2007
Hi,
I'd like to replicate an SQL Server Database to an SDF file. For Simplicity I want to use the SQL Server 2005 Management Console. The Console reports that the maximum buffer size were to small. In the comment (c# code) I can see it is set to 512. How can I increase the value in the replication assistant?
Miroslaw
View 3 Replies
View Related
Nov 6, 2015
I'm trying to query a table where in the data in a cell is 65KB and when i try to do a SELECT I am unable to get the entire data from the cell.
SELECT CAST(Xml_data as XML) from TableName where ID=100
Error Message: Msg 9448, Level 16, State 1, Line 1 XML parsing: line 241, character 76, well formed check: undeclared entity
View 4 Replies
View Related
Apr 11, 2008
Hi all
I am Importing data from CSV to Table using DTS package it showing error "exceeded Buffer size",
What is Buffer size of varchar in SQL Server2000
Appreciated your help
View 5 Replies
View Related
Jul 20, 2005
Hello there,I have and small excel file, which when I try to import into SQlServer will give an error "Data for source column 4 is too large forthe specified buffer size"I have four columns in the excel file, one of the column contains alarge chunk of data so I created a table in SQL Server and changed thetype of the field to text so I could accomodate this field but stillno luck.Any suggestions as to how to go about this.Thanks in advance,Srikanth pai
View 5 Replies
View Related
Jul 9, 2007
Hi,
SQLSERVER 2005 keeps throwing assertation error and generating crashdumps.
I want to isolate the cause, however, the query is too long (>2kb) to fit in a crash log.
Is it possible to increase the size allocated to showing the query in the crash dump, or get the full text of that query causing the crash?
View 1 Replies
View Related
May 22, 2014
I have a virtual server (VMware ESX) with 64GB RAM running a single instance of SQL 2012 SP1. The max memory config is set to 59392 (58GB).
The Page Life Expectancy for this server has been averaging well under 10 mins for the last few days, according to our monitoring.
I have been checking the amount of data in the buffer cache periodically during the day with the below query, which seems to show that there is never more than about 10GB of data at any one time, frequently dropping below 5GB:
SELECT COUNT(*) AS BufferPages,
CONVERT(decimal(10, 2), COUNT(*) / 128.0) AS BufferMB
FROM sys.dm_os_buffer_descriptorsWhy would the amount of cached data be so low (and cause so much churn)?
I am aware that other things will require some of that memory (plan cache etc.) but with Max Mem of 58GB, I would expect there to be a much higher amount of actual cached data at any one time. I did the same checks on another VM with the same amount of RAM/Max Mem setting, and there was 50GB of data in the cache, with PLE measured in hours.
View 9 Replies
View Related
Aug 24, 2007
Hi,
I have a problem to import xls file to sql table, using MS SQL 2000 server.
Actual main problem associated with it is xls file contain one colum having large amount of text which length is approximate 1500 characters.
I am trying to resolve it through like save xls to csv or text file then import but it also can not copy whole text of that column, like any column in xls having 995 characters then text or csv file contain 560 characater. So, it is also wrong.
thanks in advance, if any try to resolve
View 1 Replies
View Related
Oct 20, 2011
How do i check the size of the datacache allocated from the buffer pool by sql server?
DMV or anything to show me the pool allocation sizes for the various pools in sql server i think i may be able to work from there.
View 9 Replies
View Related
Oct 10, 2006
Hi
I am trying to make a custom task. The custom task has one input, which i map to externalmetadata column in the task and one output.
When i run the task it fails with this error ( I am putting the whole SSIS message)
SSIS package "Package.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x402090DC at Data Flow Task, Flat File Destination [1855]: The processing of file "C:ole db eft data.txt" has started.
Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Error: 0xC0047062 at Data Flow Task, Lib [2387]: System.ArgumentException: Value does not fall within the expected range.
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.IDTSBuffer90.DirectRow(Int32 hRow, Int32 lOutputID)
at Microsoft.SqlServer.Dts.Pipeline.PipelineBuffer.DirectRow(Int32 outputID)
at Lib1.LibPM.ProcessInput(Int32 inputID, PipelineBuffer buffer)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper90 wrapper, Int32 inputID, IDTSBuffer90 pDTSBuffer, IntPtr bufferWirePacket)
Error: 0xC0047022 at Data Flow Task, DTS.Pipeline: The ProcessInput method on component "Lib" (2387) failed with error code 0x80070057. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0x80070057.
Error: 0xC0047039 at Data Flow Task, DTS.Pipeline: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread1" has exited with error code 0xC0047039.
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DD at Data Flow Task, Flat File Destination [1855]: The processing of file "C:ole db eft data.txt" has ended.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "Flat File Destination" (1855)" wrote 0 rows.
Task failed: Data Flow Task
Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (5) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package.dtsx" finished: Failure.
----------------------------
This is my piece of code which is trying to put the data in the output buffer (ProcessInput function).
int GoodOutputId = -1;
IDTSInput90 inp = ComponentMetaData.InputCollection.GetObjectByID(inputID);
//GetErrorOutputInfo(ref errorOutputID, ref errorOutputIndex);
GoodOutputId = ComponentMetaData.OutputCollection[0].ID;
System.Console.Write("Here i am");
System.Console.Write(GoodOutputId);
if (!buffer.EndOfRowset)
{
while (buffer.NextRow())
{
if (_inputColumnInfos.Length == 0)
{
buffer.DirectRow(GoodOutputId);
}
else
{
buffer.DirectRow(GoodOutputId);
}
}
}
I have put any code in the else part as i am just trying to run the task as of now and later put the functionality in it.
Please let me know if i have missed something. Thanks in advance.
Vipul
View 1 Replies
View Related
Mar 6, 2008
Good day everyone,
I'm experiencing a completely random warning from any given row count component within any given data flow task. It occurs sporadically. Whilst distracting, I don't see any adverse effects to the data after the packages complete. Can someone weigh in on this warning and let me know if it is indeed benign or what I maybe able to do to fix it?
Here's the warning:
"A call to the ProcessInput method for input 75997 on component "CNT Rows sent for STG table" (75995) unexpectedly kept a reference to the buffer it was passed. The refcount on that buffer was 4 before the call, and 5 after the call returned."
Thanks,
Langston
View 4 Replies
View Related
Jun 15, 2006
I installed sql 2005 a while back. Then I recently found out my file system was fat32 (I don't understand why the hardware people did this...) and I had to convert to NTFS. Naturally the sql service no longer worked so I uninstalled inorder to reinstall now I can't reinstall it I keep getting this message
native_error=5039, msg=[Microsoft][SQL Native Client][SQL Server]MODIFY FILE failed. Specified size is less than current size.
I'll try to post the full log in a new post.
View 11 Replies
View Related
Nov 20, 2000
Upon running DTS manually to transfer data from Excel into SQL Server, I
get the error:
-----------------------------ERROR OUPTUT ------------------------------------
Error at Source for Row number 264. Errors encountered so far in this task: 1. General error -2147217887 (80040E21).
Data for source column 3 ('Value') is too large for the specified buffer size.
---------------------------END ERROR OUTPUT----------------------------------
*** 'Value' is varchar(4000); largest having length of 1000.
*** The network packet size is 4096.
?? AM I SUPPOSED TO CHANGE THE BUFFER SIZE??
Your kind help is greatly appreciated
Thanks
Ziggy
View 2 Replies
View Related
Nov 14, 2007
Using C#, SQL Server 2005, ASP.NET 2, in a web app, I've tried removing the size from parameters of type NCHAR, NVARCHAR, and VARCHAR. I'd rather just send a string and let the size of the parameter in the SP truncate any extra chars if need be. I began getting the error below, and eventually realized it happened only with output parameters, as in the code snippet below.String[3]: the Size property has an invalid size of 0. par = new SqlParameter("@BusinessEntity", SqlDbType.NVarChar); par.Direction = ParameterDirection.Output; cmd.Parameters.Add(par); cmd.ExecuteNonQuery();What's the logic behind this? Is there any way around it other than either finding out what the size should be, or assigning a size larger than would ever be needed? ThanksMike Thomas
View 6 Replies
View Related
Jul 20, 2005
Does anybody know what might cause the following message to show up inthe SQL Server Error Log?:Time out occurred while waiting for buffer latch type 2, bp0x12260f80, page (5:77914), stat 0x40d, object ID 7:421576540:0,waittime 500. Continuing to wait.I've read several articles about what to do about this situation onSQL Server 2000, but I'm running SQL Server 7.0. Specifically, I'mrunning version 7.00.842. Is there a way to resolve this problemwithout upgrading to some flavor of SQL Server 2000?
View 2 Replies
View Related
Feb 27, 2007
HI ,
Need some quick fix Help
I have been
trying to load data from AS400 to DB2 (windows) using ADO.NET connection in
Data reader source and OLEDB Destination (IBM Oledb provider )
The files, I€™m trying to load, have
number of rows more then 15 million.
On execution of the package I get
Out of Memory Error (see below)
My Destination Box is 4GB+ RAM and 4
CPU Box.
There seems to be some Buffer and
Swapping related issue which I€™m not able to figure out. It says that System is
unable to allocate memory
Please help me on the same.
Thanks in Advance
Amit S
SSIS package "ABCDE
1.dtsx" starting.
Information: 0x4004300A at ABCDE
2003 to 2004, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE
2003 to 2004, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at ABCDE
2003 to 2004, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at ABCDE
2003 to 2004, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at ABCDE
2003 to 2004, DTS.Pipeline: Execute phase is beginning.
Error: 0xC0202009 at ABCDE
2003 to 2004, OLE DB Destination [12]: An OLE DB error has occurred. Error
code: 0x8007000E.
An OLE DB record is available.
Source: "Microsoft Cursor Engine" Hresult: 0x8007000E Description:
"Out of memory.".
Error: 0xC0047022
at ABCDE 2003 to 2004, DTS.Pipeline: The ProcessInput method on component
"OLE DB Destination" (12) failed with error code 0xC0202009. The
identified component returned an error from the ProcessInput method. The error
is specific to the component, but the error is fatal and will cause the Data
Flow task to stop running.
Error: 0xC0047021 at ABCDE
2003 to 2004, DTS.Pipeline: Thread "WorkThread0" has exited with
error code 0xC0202009.
Error: 0xC02090F5
at ABCDE 2003 to 2004, DataReader Source [61]: The component "DataReader
Source" (61) was unable to process the data.
Error: 0xC0047038 at ABCDE
2003 to 2004, DTS.Pipeline: The PrimeOutput method on component
"DataReader Source" (61) returned error code 0xC02090F5. The
component returned a failure code when the pipeline engine called
PrimeOutput(). The meaning of the failure code is defined by the component, but
the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at ABCDE
2003 to 2004, DTS.Pipeline: Thread "SourceThread0" has exited with
error code 0xC0047038.
Information: 0x40043008 at ABCDE
2003 to 2004, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at ABCDE
2003 to 2004, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at ABCDE
2003 to 2004, DTS.Pipeline: "component "OLE DB Destination"
(12)" wrote 289188 rows.
Task failed: ABCDE 2003 to
2004
Warning: 0x80019002 at ABCDE
1: The Execution method succeeded, but the number of errors raised (6) reached
the maximum allowed (1); resulting in failure. This occurs when the number of
errors reaches the number specified in MaximumErrorCount. Change the
MaximumErrorCount or fix the errors.
Executing ExecutePackageTask:
C:Documents and SettingsAdministratorMy DocumentsVisual Studio
2005ProjectsIntegration Services Project1Integration Services Project1ABCDE
2.dtsx
Information: 0x4004300A at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Execute phase is beginning.
Information:
0x4004800D at ABCDE 2005_04 to 2005_11, DTS.Pipeline: The buffer manager failed
a memory allocation call for 10484320 bytes, but was unable to swap out any
buffers to relieve memory pressure. 3 buffers were considered and 3 were
locked. Either not enough memory is available to the pipeline because not
enough are installed, other processes were using it, or too many buffers are
locked.
Error: 0xC0047012
at ABCDE 2005_04 to 2005_11, DTS.Pipeline: A buffer failed while allocating
10484320 bytes.
Error: 0xC0047011
at ABCDE 2005_04 to 2005_11, DTS.Pipeline: The system reports 63 percent memory
load. There are 4294660096 bytes of physical memory with 1548783616 bytes free.
There are 2147352576 bytes of virtual memory with 227577856 bytes free. The
paging file has 6268805120 bytes with 3607072768 bytes free.
Error: 0xC02090F5 at ABCDE
2005_04 to 2005_11, DataReader Source [61]: The component "DataReader
Source" (61) was unable to process the data.
Error: 0xC0047038 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: The PrimeOutput method on component
"DataReader Source" (61) returned error code 0xC02090F5. The
component returned a failure code when the pipeline engine called
PrimeOutput(). The meaning of the failure code is defined by the component, but
the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Thread "SourceThread0" has exited
with error code 0xC0047038.
Error: 0xC0047039 at ABCDE 2005_04
to 2005_11, DTS.Pipeline: Thread "WorkThread0" received a shutdown
signal and is terminating. The user requested a shutdown, or an error in
another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Thread "WorkThread0" has exited
with error code 0xC0047039.
Information: 0x40043008 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at ABCDE
2005_04 to 2005_11, DTS.Pipeline: "component "OLE DB
Destination" (12)" wrote 0 rows.
Task failed: ABCDE 2005_04 to
2005_11
Warning: 0x80019002 at ABCDE:
The Execution method succeeded, but the number of errors raised (7) reached the
maximum allowed (1); resulting in failure. This occurs when the number of
errors reaches the number specified in MaximumErrorCount. Change the
MaximumErrorCount or fix the errors.
Executing ExecutePackageTask:
C:Documents and SettingsAdministratorMy DocumentsVisual Studio
2005ProjectsIntegration Services Project1Integration Services Project1ABCDE
3.dtsx
Information: 0x4004300A at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Pre-Execute phase is beginning.
€¦€¦.
€¦€¦€¦€¦
View 11 Replies
View Related
Jun 22, 2007
I have SSIS sp2 running on a Win2003 64bit Server with 4processors and 16GB of ram. I am trying to load 1 billion rows of data into 10 tables. The source data is found in 12 different 50GB fixed width flat files stored on 2 different files servers. The destination is 10 different tables in a single SQL Server 2000 database which has 1TB of space allocated to it. I use the MS SQL OLE DB connection for each destination table.
The SSIS package is pretty straight forward. Everything takes place in 1 data flow. The 12 sources each flow through 12 different Row Count Transformations into a single Union All Transformation. From the Union All transformation the data goes into another Row Count Transformation then into a Conditional Split Tranformation. The data is split into 10 streams base on the last digit of one of the ID fields in the data. The 10 streams are fed to the 10 destination tables.
Every time I run the package (Start without Debugging) the avaible physical memory goes from around 15GB to 0 in about 2 minutes. The % comitted bytes in use goes from 5% to 100% in about 5 minutes. Once at 100% it will stay there for around 5 minutes before it will finally give me the following error message:
The system reports 98 percent memory load. There are 17178939392 bytes of physical memory with 189382656 bytes free. There are 8796092891136 bytes of virtual memory with 8742748930048 bytes free. The paging file has 54388109312 bytes with 16056320 bytes free.
This message is followed by a bunch of other messages:
SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Union All" (2073) failed with error code 0x8007000E. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0x8007000E. There may be error messages posted before this with more information on why the thread has exited.
The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Dr 2" (663) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
...
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Dr 3" (898) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread2" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
I have tried adjusting the Engine threads down from 5 to 4 to 2. I have tried adjusting the FastLoadMaxInsertCommitSize from 1000000 to 100000 to 1000 (Destinations are tablocked and Check Constraints). I have tried moving the DefaultBufferMax up to 16500 and down to 2000.
Nothing works. The package fails everytime within 20 minutes of its start.
I would prefer not to have to rewrite the package and process each file sequentially as that would take forever.
Any ideas would be greatly appreciated.
Thanks.
-Scott
View 5 Replies
View Related
Jan 11, 2008
Hi Guys,
i've found many threds with SSIS buffer errors but non of them seems to work, or have a good solution. i'l explain the story short.
i've got a DB server running on Windows 2003 R2 Enterprise with 10GB RAM 20GB Virtual memory with same spec another machine for the web server.
both machines have "Lock Memory in memory" group policy enabled for
Network Service
System
DomainSQLServiceAccount (in DB server)
and in the DB memory "awe allocation" is also enabled.
both servers have /PAE /3GB switches enabled in boot.ini file
problem: i run all my SSIS packages in the web server through IIS. so the processes are devided between DB and web server. i.e SSIS service is also running in web server.
when i run packages under load (transforming - 200,000 records) i get buffer allocation errors.
A buffer failed while allocating 10485760 bytes.
Error Code = -1073450990
all packages i run i have set the default buffer temp to my web servers e: emp (got 260GB space left). and defaultbuffer size is 10mb with 10,000 defaultbuffermaxrows.
funny this is when it hit 8.33GB (approx 875 files) i get the above error message. it always seems to give me errors after 8.33GB.
Note: all packages run in IIS (w3wp.exe). i'm configuring my new production boxes. the old production with similar envirnment (less speed) work with the same data and packages fine under load.
new production machine got more memory than the old machine but i get memory error (buffer). it doesn't even use up all available physical memory, only about 3gb (max), then start buffering to disk.
any help would be greately appreciated.
i also got
The system reports 31 percent memory load. There are 10734981120 bytes of physical memory with 7326126080 bytes free. There are 3221094400 bytes of virtual memory with 283840512 bytes free. The paging file has 12661686272 bytes with 9633767424 bytes free.Error Code = -1073450991
this was before i increased virtual memory to 20gb(from 4gb).
Any ideas i can try out?
View 4 Replies
View Related
Sep 15, 2007
Hi,
I am having problem with the CRecorset::Update() function.
I have declared a CRecordset object in client Application in VC++6.0.
I open the recordset in dynamic mode.
Before opening the recordset , I have obtained the UPDLOCK on the base table.( Obviously this UPDLOCK is in transaction).
When I try to call CRecordset::Update() it gives me exception 16931(There are no rows in the current fetch buffer).
I have define a clustered index on this table.
But I still get the exception 16931 on calling CRecorset::Update().
Any help is much appreciated.
Thanks in advance.
View 2 Replies
View Related
Nov 1, 2007
Hi,
I get folllwing error while SSIS package is executing and uploading Data from Flat Files to SQL Server 2005. This Error goes away when I change my SSIS Package Connection Manager to read UNICODE data files.
Is there any smart way to figure out which flat files have UniCode Data in the and which is not a Unicode data file.
Thanks,
Vinod
Information: 0x402090DC at Upload EP Data, DAT File Reader [1]: The processing of file "C:Data2EP05PF2000002_070412_002921.dat" has started.
Information: 0x4004300C at Upload EP Data, DTS.Pipeline: Execute phase is beginning.
Error: 0xC020209C at Upload EP Data, DAT File Reader [1]: The column data for column "SYSTEM_LOCKED" overflowed the disk I/O buffer.
Error: 0xC0202091 at Upload EP Data, DAT File Reader [1]: An error occurred while skipping data rows.
Error: 0xC0047038 at Upload EP Data, DTS.Pipeline: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "DAT File Reader" (1) returned error code 0xC0202091. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at Upload EP Data, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047039 at Upload EP Data, DTS.Pipeline: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047021 at Upload EP Data, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Information: 0x40043008 at Upload EP Data, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DD at Upload EP Data, DAT File Reader [1]: The processing of file "C:Data2EP05PF2000002_070412_002921.dat" has ended.
View 13 Replies
View Related
Mar 15, 2006
Hello:
I tried to synchronize the SQL 2000 database with the SQL mobile server on PDA with SQL server management studio from SQL 2005. I got the error as €œThe buffer pool is too small or there are too many open cursors. HRESULT 0x80004005 (25101) €?. The SQL database file size is 120MB.
I create the .sdf file on PDA with the following C# code:
string connString = "Data Source='Test.sdf'; max database size = 400; max buffer size = 10000;";
SqlCeEngine engine = new SqlCeEngine(connString);
engine.CreateDatabase();
I think the 400MB max database size and 10000KB max buffer size are big enough to hold that SQL database data and I have already successfully synchronized my PDA with another smaller SQL server database file. I have been kept trying and searching this for couple of days and still can not figure it out.
Moreover, the synchronization always stops at the same table.
Please help and a lot of thanks in advance.
View 1 Replies
View Related
Oct 11, 2004
Howdy Folks,
Our site has been experiencing this issue for a couple of months now.. Hopefully someone else can assist, as I’ve got to a point where I think issue lies within the application or a Microsoft bug. Web searches have reveled a number installations that have also had this error but its has not revealed an actual fix.
I understand this error code basically means data being returned to the client is getting either corrupted or the data is too large to fit into the buffer on the client side. Client in our case is the terminal server, here after called a application server
As the user base has increased form 5 to 20, I have noticed that the issue is occurring more frequently in comparison to when the company first started using the application /database. Its just about daily now...
The db server also has 8 other db's residing on it - but they are all less than 300 meg.
The attached PowerPoint doc has the trace info & the surrounding code for each process that has suffered a buffer error over a period of a week.
DB Server Environment: Win2000 SP4, SQL2000 SP3a, MDAC 2.7 SP1 refresh.
Application Environment: Written In house in VB.NET Framework 1.1 – setup as a published app on a terminal server – running windows 2000 SP4
Common features of the issue, that have been omitted from trace output for visibility reasons are:
-Involves 1 particular DB (thats accessed by VB app) & its developement db
-All connections are coming from 1 application server
-Issue does not relate to any particular site connecting to the application server using this application
I have reviewed & fixed several potential server side causes but this error still is occuring with in the environment:
MDAC versions must be common on application & server:
- Removed from equation by updating MDAC version on App server to be the same as DB Server: 2.7 SP1 Refresh
Network related
- Considered unlikely; we are also not experiencing network card errors on either server; also all db's would be experiencing connectivity errors.
Which leaves us with Application related options to review:
- Compilation error of application
- App parameter definitions to stored procedures are the correct data type
- Ensure values being passed do not exceed 4000 characters as that has also been known to create this error message
- I've asked the developer to review MS KB 827366 article, as it may be a valid test
- In regard to MSKB 832977 - I am not using pssdiag & have a later version of the MS Analyzer. But what I thought was interesting, is the statement that this problem occurs more frequently when an application submits a large remote procedure call (RPC) input buffer, especially when the RPC input buffer is greater than or equal to 8 KB. However, this problem may occur even if the input buffer is less than 4 KB
- A is using datatypes varchar & char - not nvarchar & nhar
Any assistance with this issue would be appreicated as server performance is being effected - these processes hang around for 1 - 5 mins before terminating (refer duration times in the powerpoint traces)
Thanks In advance
Suze.
View 4 Replies
View Related
Oct 23, 2005
Hi,I've developed an ASP.NET application which uses MS-SQL Server 2000 as abackend. But as the site hits increase SQL server reponse becomes lower.At some stage after that SQL Server gets automativally stopped bringingcomplete web-application down to halt. i checked the Windows 2000 EventLogs and found several error logs indicating folloowing line."SQL Server 2000 Error 17805 Invalid buffer received from client.". Butno errors on UI side. What may be the actual problem.In storedproceduresor at some other place?Awaiting favourble reply.Regards,Amit*** Sent via Developersdex http://www.developersdex.com ***
View 1 Replies
View Related
Mar 5, 2008
Hi Everyone-
i am facing a memery problem error while i am running the SSIS package
while i am running the package it show the following Error
In Spend Dataload package: A buffer failed while allocating 70485760 bytes.
--------------------------------------------------------------------------------
In Spend Dataload package: The system reports 54 percent memory load. There are 3747647488 bytes of physical memory with 1694883840 bytes free. There are 2147352576 bytes of virtual memory with 1061253120 bytes free. The paging file has 7328251904 bytes with 5083856896 bytes free.
--------------------------------------------------------------------------------
In Spend Dataload package: The attempt to add a row to the Data Flow task buffer failed with error code 0x8007000E.
--------------------------------------------------------------------------------
In Spend Dataload package: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Flat File Source" (2718) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
--------------------------------------------------------------------------------
In Spend Dataload package: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
--------------------------------------------------------------------------------
In Spend Dataload package: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
--------------------------------------------------------------------------------
In Spend Dataload package: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
is there anyone know the solution of that problem and please dont tell me to use extra memery or a hardware solution as this option is not available.
thanx
Maylo
View 5 Replies
View Related
Feb 2, 2006
I am working with merge replication. The db server is running Windows 2003 Server Std x64 with SQL 2005 Std x64. The IIS server is running Windows 2003 Server Stx x86. The clients are Windows Mobile 5.0 running SQL 2005 Mobile.
I have previously been able to get the test client to initialize a subscription to the publication. I made some changes recently and added about 7 tables, bringing the total articles to 104. Some of the articles have unpublished columns, which means they are using vertical filtering as well. This publication is also using parameterized filters. During publication creation, there are several warnings that "Warning: column 'rowguid' already exists in the vertical partition".
The snapshot agent runs without any errors. When the client attempts to initialize, I get the error "The buffer pool is too small or there are too many open cursors."
My question is 2 part. First, what is causing this error, and second, how can it be resolved?
View 1 Replies
View Related
Apr 6, 2007
The scenario is as follows: I have a source with many rows. Each row has a column called max_qty_value. I need to perform a calculation using another column called qty. This calculation is something similar to dividing qty/(ceiling) max_qty_value. Once I have that number I need to write an additional duplicate row for each value from the prior calculation performed. For example, 15/4 = 4. I need to write 4 rows to the same target table as in line information for a purchase order.
The multicast transform appears to only support fixed and/or predetermined outputs. How do I design this logic in SSIS to write out dynamic number of rows to a target table.
Any ideas would be greatly appreciated.
thanks
John
View 18 Replies
View Related
