Bug In Management Studio : Cannot Add Procedure Article For Heterogeneous Transactional Replication
Jan 24, 2007
Hi,
I'm setting up a heterogeneous transactional push replication with Sybase ASE 12.5.3 as subscriber. With management studio I try to create an procedure article with following properties
Copy extended properties : false
Destination object name : pGS_RefuseRequest
Destination object ownere : dbo
Action if name is in use : keep existing object unchanged
Replicate : Execution of the stored procedure
Create schemas at Subscriber : false
When I save the article and then the publication I got following error message:
Can not add artice 'pGS_RefuseRequest'.
Object was not found on server. Check if this object exists on the server. (Microsoft.SqlServer.Rmo)
That's realy strange because the wizard offered the procedure pGS_RefuseRequest in the list of possible articles.
Fortunatly I can create the article with following TSQL statement :
There is a SQL Server 2008 R2 SP3 Clustered Instance that has Transactional Replication. It is by no means a large replication setup in terms of data/article count. SQL Server was recently patched to SP3 and is current on Windows 2008 R2 Patches.
When I added a new article to replication (via 2014 SSMS GUI) it seems to add everything correctly (replication tables/procs show the new article as part of the publication). The Publication is set to allow the snapshot to generate for just new articles (setting immediate_sync & allow_anonymous to false).
When the snapshot agent is run, it runs without error and claims to have generated a snapshot of 1 article. However the snapshot folder only contains a folder for the instance (that does have the modified time of the snapshot agent execution) and none of the regular bcp/schema files.
The tables never make it to the subscribers and replication continues on without error for the existing articles. No agents produce any errors and running the snapshot agent w/ verbose output provides no errors or insight into any possible issues.
I have tried:
- dropping/re-adding the article in question.
- Setting up a new Snapshot Folder
- Validated all the settings and configurations
I'm hesitant to reinitialize a subscriber since I am not confident a snapshot can be generated. Also wondering if this is related to the SP3 Upgrade, every few months new articles are added to the publication and this is the first time since the upgrade to SP3 that it has been done.
Replication Type: Transactional With Updateable Subscriptions SQL Server Version: SQL Server 2005 Enterprise Edition Publisher, Subscriber1 and Subscriber2 all on same SQL Server
Problem: I am trying to set up a transactional replication with two updateable subscriptions. All three databases are a carbon copy of each other. Every table to be replicated contains an identity key column. I've been asked to create the replication without assigning separate identity ranges for the publisher and the updateable subscriptions. In other words they want a continous ID range. Can this be done without managing identity ranges programatically outside of SQL Server itself?
Example:
Publisher inserts into table test1 in database1. This creates ID 100 for the record. ID 100 replicates to Subscriber1 (database2) and Subscriber2 (database3). Subscriber1 and 2 identity seeds are then incremented to ID 100. So far, all three databases have the same identity seed in table test1. Subscriber1 inserts into table test1 in database2. This creates ID 101 for the record. ID 101 is replicated to Subscriber2 (database3) and to the publisher (database1). Subscriber2 identity seed is then incremented to ID 101. However, the Publisher retains it's original identity seed of 100. Insert into Publisher table test1 will fail since it will try to insert the identity seed of 101 which is taken.
I have tried identity range management Automatic and Manual. Both seem to have some limitations in managing identity seeds unless different identity ranges are assigned for publisher and subscriber.
Can someone recommend a solution to this problem? Can this be done natively in SQL Server 2005 replication. Or can some recommend another approach to make this work?
Hi, i can make and save a stored procedure in Visual Web Developer (via Database Explorer). It appears then in the list op stored procedure in Management Sudio. But how to do the same in Management Studio? When i make a sp and i want to save it, Management Studio asks me a name, but put the file in a Projects directory in 'My documents'. It never appears in the list of sp. Thanks tartuffe
Hello to all, I have a stored procedure. If i give this command exce ShortestPath 3418, '4125', 5 in a script and excute it. It takes more 30 seconds time to be excuted. but i excute it with the same parameters direct in Microsoft SQL Server Management Studio , It takes only under 1 second time I don't know why? Maybe can somebody help me? thanks in million best Regards Pinsha My Procedure Codes are here:set ANSI_NULLS ON set QUOTED_IDENTIFIER ON GO -- ============================================= -- Author: <Author,,Name> -- Create date: <Create Date,,> -- Description: <Description,,> -- ============================================= ALTER PROCEDURE [dbo].[ShortestPath] (@IDMember int, @IDOther varchar(1000),@Level int, @Path varchar(100) = null output ) AS BEGIN
if ( @Level = 1) begin select @Path = convert(varchar(100),IDMember) from wtcomValidRelationships where wtcomValidRelationships.[IDMember]= @IDMember and PATINDEX('%'+@IDOther+'%',(select RelationshipIDs from wtcomValidRelationships where IDMember = @IDMember) ) > 0 end if (@Level = 2) begin select top 1 @Path = convert(varchar(100),A.IDMember)+'-'+convert(varchar(100),B.IDMember) from wtcomValidRelationships as A, wtcomValidRelationships as B where A.IDMember = @IDMember and charindex(convert(varchar(100),B.IDMember),A.RelationshipIDS) > 0 and PATINDEX('%'+@IDOther+'%',B.RelationshipIDs) > 0 end if (@Level = 3) begin select top 1 @Path = convert(varchar(100),A.IDMember)+ '-'+convert(varchar(100),B.IDMember)+'-'+convert(varchar(100),C.IDMember) from wtcomValidRelationships as A, wtcomValidRelationships as B, wtcomValidRelationships as C where A.IDMember = @IDMember and charindex(convert(varchar(100),B.IDMember),A.RelationshipIDS) > 0 and charindex(convert(varchar(100),C.IDMember),B.RelationshipIDs) > 0 and PATINDEX('%'+@IDOther+'%',C.RelationshipIDs) > 0 end if ( @Level = 4) begin select top 1 @Path = convert(varchar(100),A.IDMember)+ '-'+convert(varchar(100),B.IDMember)+'-'+convert(varchar(100),C.IDMember)+'-'+convert(varchar(100),D.IDMember) from wtcomValidRelationships as A, wtcomValidRelationships as B, wtcomValidRelationships as C, wtcomValidRelationships as D where A.IDMember = @IDMember and charindex(convert(varchar(100),B.IDMember),A.RelationshipIDS) > 0 and charindex(convert(varchar(100),C.IDMember),B.RelationshipIDs) > 0 and charindex(convert(varchar(100),D.IDMember), C.RelationshipIDs) > 0 and PATINDEX('%'+@IDOther+'%',D.RelationshipIDs) > 0 end if (@Level = 5) begin select top 1 @Path = convert(varchar(100),A.IDMember)+ '-'+convert(varchar(100),B.IDMember)+'-'+convert(varchar(100),C.IDMember)+'-'+convert(varchar(100),D.IDMember)+'-'+convert(varchar(100),E.IDMember) from wtcomValidRelationships as A, wtcomValidRelationships as B, wtcomValidRelationships as C, wtcomValidRelationships as D, wtcomValidRelationships as E where A.IDMember = @IDMember and charindex(convert(varchar(100),B.IDMember),A.RelationshipIDS) > 0 and charindex(convert(varchar(100),C.IDMember),B.RelationshipIDs) > 0 and charindex(convert(varchar(100),D.IDMember), C.RelationshipIDs) > 0 and charindex(convert(varchar(100),E.IDMember),D.RelationshipIDs) > 0 and PATINDEX('%'+@IDOther+'%',E.RelationshipIDs) > 0 end if (@Level = 6) begin select top 1 @Path = '' from wtcomValidRelationships end END
I have wrriten many stored procedures in the past without issue, but this is my first time using SQL Server Management Studio Express. I am having trouble creating a new stored procedure. Here is what's happening: I am opening my database, right clicking on "Stored Procedures" and selecting "New Stored Procedure". A new window opens with a template for creating a stored procedure. The window is called: "SQLEXPRESS.DBName - sqlquery1.sql". I then type up my stored procedure without an issue. However, when I go to save the stored procedure it wants to save it as a separate file in a projects folder. It does not become part of the DB (as far as I can tell). When I used to use Enterprise Manager (not an option anymore) this never happened. I'm sure I'm doing something dumb. Can someone enlighten me. Thanks,Chris
I'm updating a process that recreates a large table every night. The table is the result of a bunch of nightly batch processes and holds a couple million records. In the past, each night at the end of the batch jobs the table would be dropped and re-created with the new data. This process was embodied in dynamic sql statements from an MFC C++ program, and my task is to move it to a SQL Server 2000 stored procedure that will be called from a .Net app. Here's the relevant code from my procedure: sql Code:
Original - sql Code
-- recreate new empty BatchTable table print 'Dropping old BatchTable table...' exec DropBatchTable --stored procedure called from old code that does a little extra work when dropping the table
-- validate drop If exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[BatchTable]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) Begin RAISERROR( 'Unable to drop old BatchTable!',0,1) WITH NOWAIT End Else Begin print 'Old BatchTable dropped.' End
print 'Creating new BatchTable...' SELECT TOP 0 *, cast('' as char(3)) as Client, cast('' as char(12)) as ClientDB INTO dbo.BatchTable FROM differentDB.dbo.BatchArchives
--validate create If Not exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[BatchTable]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) Begin RAISERROR( 'Unable to create new BatchTable!',0,1) WITH NOWAIT End Else Begin print 'New BatchTable Created.' End
-- recreate new empty BatchTable table print 'Dropping old BatchTable table...' exec DropBatchTable --stored procedure called from old code that does a little extra work when dropping the table -- validate drop IF EXISTS (SELECT * FROM dbo.sysobjects WHERE id = object_id(N'[dbo].[BatchTable]') AND OBJECTPROPERTY(id, N'IsUserTable') = 1) BEGIN RAISERROR( 'Unable to drop old BatchTable!',0,1) WITH NOWAIT END ELSE BEGIN print 'Old BatchTable dropped.' END print 'Creating new BatchTable...' SELECT TOP 0 *, CAST('' AS CHAR(3)) AS Client, CAST('' AS CHAR(12)) AS ClientDB INTO dbo.BatchTable FROM differentDB.dbo.BatchArchives --validate create IF NOT EXISTS (SELECT * FROM dbo.sysobjects WHERE id = object_id(N'[dbo].[BatchTable]') AND OBJECTPROPERTY(id, N'IsUserTable') = 1) BEGIN RAISERROR( 'Unable to create new BatchTable!',0,1) WITH NOWAIT END ELSE BEGIN print 'New BatchTable Created.' END
The print statements are there because the .net app will read them in and then write them to a log file. Some of the other mechanics are there to mimic the old process. The idea is to duplicate the old process first and then work on other improvements.
This works in Management studio. The .Net App reports that the old table was dropped, but when it tries to create the new table it complains that "There is already an object named 'BatchTable' in the database." I have verified that the old table is removed.
Quick question... I've created my DB in MSSQLSMS, then attempted to created a stored procedure for it. The code itself is fine, I just need to know how to actually attach it so that it appears in the "Stored Procedures" section of my Database.
I have Right Clicked on Stored Procedures > New Stored Procedure... > Edited as required > Save
When I attempt to save it, it prompts me for a file. That's fine, did that - but I can't see ANY way to actually attach this to the DB.
I have a db based on the Tracking_Schema.sql / Tracking_Logic.sql (find in &windir%/Microsoft.NET/Framework/v3.0/Windows Workflow Foundation/SQL/EN), so after executing both of them I get several stored procedures, especially dbo.GetWorkflows. And I have a solution in VS05 which when executed is filling this stored procedure with Instance-Id´s. My question is: how is the working command (like exec, truncate,..) to empty my st.procedure, not to drop/delete it?
I created a simple procedure in SQL Server Management Studio 2014. When I run it I see my query results but not my return value. Do I have to change settings to see the return value?
CREATE PROCEDURE temp AS BEGIN SELECT GetDate() FROM mytable RETURN 1 END EXEC temp
I know that adding a column using ALTER TABLE to add a column automatically allows SQLSERVER 2005 to replicate the schema changes to the subscribers, however, I would like to add a new column to an existing article that is being used for merge replication, however, I don't want this column to be replicated. Re-initialising the subscriptions is not a option. Help would be appreciated.
I'm interested in combining the Peer-to-Peer Transactional Replication and Standard Transactional Replication to provide a scale out solution of SQL Server 2005. The condition is as follows:
We may have 10 SQL Server 2005 (1 Publisher + 9 Subscriber) running transactional replication in the production environment and allow updates in subscribers. To offload the loading of the publisher, we plan to have 2 Publisher (PubNode1 and PubNode2) using Peer-to-Peer Transaction Replication and the rest 8 subscribers will be divided into 2 groups. The subscribers 1-4 (SubNode1, SubNode2, SubNode3, and SubNode4) will be set to be standard transactional replication subscribers of PubNode1, and the rest 4 subscribers (SubNode5, ..., SubNode8) will be set to be standard transactional replication subscribers of PubNode2.
Is it possible to setup above 2 Publisher + 8 Subscriber topology? Also, could we set the 8 subscribers with updatable subscriptions to achieve each node is updatable?
We do not plan to set all the 10 nodes using Peer-to-Peer Transactional Replication as it is necessary to make sure n*(n-1)/2 (i.e. 45) peer-to-peer connections is reliable. It seems that the maintenance cost is high if the servers are not in a LAN and the topology is very high coupling. So we prefer to divide the 10 nodes into 2 groups and reduce the cost of each node to maintain the connections to all other sites.
EXEC sp_insertNewRecord 7, 'Peter', 'Wang', '678 Old St', 'Detroit',
'Michigon', '67899', 'PeterWang@yahoo.com'
GO
======================================================================= Now, I want to insert a new record into the dbo.Friends table of my shcDB by executing the following T-SQL and Visual Basic 2005 codes that are programmed in a VB2005 Express project "CallshcDBspWithAdoNet": --Form1.vb--
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes
Public Class Form1
Public Sub InsertNewFriend()
Dim connectionString As String = "Integrated Security-SSPI;Persist Security Info=False;" + _
"Initial Catalog=shcDB;Data Source=.SQLEXPRESS"
Dim connection As SqlConnection = New SqlConnection(connectionString)
connection.Open()
Try
Dim command As SqlCommand = New SqlCommand("sp_InsertNewRecord", connection)
=========================================================== I ran the above project in VB 2005 Express and I got the following 5 errors: 1. Name 'EXEC' is not declared (in Line 16 of Form1.vb) 2. Method arguments must be enclosed in parentheses (in Line 16 of Form1.vb) 3. Name 'sd-insertNewRecord' is not declared. (in Line 16 of Form1.vb) 4.Comma, ')', or a valid expression continuation expected (in Line 16 of Form1.vb) 5. Expression expected (in Line 16 of Form1.vb) ============================================================ I know that "EXEC sp_insertNewRecord 6, 'Craig', 'Utley', '5577 Baltimore Ave',
'Ellicott City', 'MD', '21045', 'CraigUtley@yahoo.com' "in Line 16 of Form1.vb is grossly in error. But I am new in doing the programming of T-SQL in VB 2005 Express and I am not able to change it.
Please help and advise me how to correct these problems.
I am having a server where replication is set up between 2 differnt databases. It is currently running. I want to add a couple of tables to the replication. I tried using sp_addArticle, but after executing it, in the properties of the publication it shows the new tables, but at the database level the tables are missing.
I tried with sp_addsubscription but I am getting strange error:
Server: Msg 14100, Level 16, State 1, Procedure sp_addsubscription, Line 240 Specify all articles when subscribing to a publication using concurrent snapshot processing.
What can I do to publish the tables into the target database?
Hi,I have transactional replication set up on on of our MS SQL 2000 (SP4)Std Edition database serverBecause of an unfortunate scenario, I had to restore one of thepublication databases. I scripted the replication module and droppedthe publication first. Then did a full restore.When I try to set up the replication thru the script, it created thepublication with the following error messageServer: Msg 2714, Level 16, State 5, Procedure SYNC_FCR ToGPRPTS_GL00100, Line 1There is already an object named 'SYNC_FCR To GPRPTS_GL00100' in thedatabase.It seems the previous replication has set up these system viewsSYNC_FCR To GPRPTS_GL00100. And I have tried dropping the replicationmodule again to see if it drops the views but it didn't.The replication fails with some wired error & complains about thisviews when I try to run the synch..I even tried running the sp_removedbreplication to drop thereplication module, but the views do not seem to disappear.My question is how do I remove these system views or how do I make thereplication work without using these views or create new views.. Whyis this creating those system views in the first place?I would appreciate if anyone can help me fix this issue. Please feelfree to let me know if any additional information or scripts needed.Thanks in advance..Regards,Aravin Rajendra.
I've created a merge replication a few days ago. it works correctly, but today when click synchronize publications, some of then encounter this error :
Data validation failed for one or more articles. When troubleshooting, check the output log files for any errors that may be preventing data from being synchronized properly. Note that when error compensation or delete tracking functionalities are disabled for an article, non-convergence can occur. (Source: MSSQL_REPL, Error number:
I have a web application using Stored Procedure (SP). I see that there's a SP taking long time to execute. I try to capture it by Profiler Tool, and find out that with the same SP on the same db with the same parameter. The duration of executing by my web app is far bigger than the duration of executing on SQl server management studio - query window
Please see the image through this url http://kyxao.net/127/ExecutionProblem.png
Hi,I have a web application using Stored Procedure (SP). I see that there's a SP taking long time to execute. I try to capture it by Profiler Tool, and find out that with the same SP on the same db with the same parameter. The duration of executing by my web app is far bigger than the duration of executing on SQl server management studio - query windowPlease see the image attached http://kyxao.net/127/ExecutionProblem.png Any ideas for this issue?Thanks a lot Jalijack
I have recently installed the SQL Server Management Studio Express but I do not find Management Tools in order to create scheduled backups and shrinking of the databases. I was under the impression that this should be included in the Management Studio. I use the SQL 2005 Express for smaller customers who run the SQL on a desktop unit. I need a way to backup the data to a server machine for backup purposes. I have uninstalled and reinstalled to no avail.
I have a database in my "App_Data" folder of my visual studio project. I can view it fine in Visual Studio's built-in tools for managing a database attached to a solution. However i recently started playing around with the SQL Server Management Studio Express program. When i attach my database to Management Studio, and try to run my program it crashes. I think it might be a permissions error?!? When i detatch it and reattach it in visual studio it runs fine again. Any suggestions? ThanksJason
I am new to visual studio and I am still not sure of all its components and features.
I installed visual studio 2005 standard edition but cannot find SQL Server Management Studio?
I guess this must be because it is not included with Visual studio 2005 standard. Is it included with VS 2005 professional?
I want to add pictures of products to my shopping site using an SQL database and I’ve been told that SQL Server Management studio is required as it is a graphical tool.
How would I go about obtaining the SQL server management studio. There seems to be different versions of SQL server that it is confusing to know which one to purchase.
Will the SQL server 2005 version that comes with Visual studio standard be sufficient for me now right? I want to create a shopping site with hundreds, perhaps even thousands of products. I want to use an SQL server 2005 database. The database will include ‘dynamically generated’ product images if that is the correct terminology.
My goodness, it seems I still have so much to learn.
I have created a database under management studio and i want it to be connected in visual studio but it failed the error msgs said that the database can't be connected coz the database with same name exits but that is not true
