Every time I try to remove 'condensed type' from the custom table view (working in database diagrams) the MSE crashes on me, as soon as I push the < button to remove it from the list of columns.
Is there a forum or place to post such a bug, or someone to send full details to? When it dies, it doesn't give me an option to send the information to MS.
Cheers,
-jc
Hi all,
For the first time, I want to set up the configuration of my SQL Server Management Studio Express (SSMSE) to allow me in doing the non-User-Instance/ADO.NET 2.0 programming from my VB 2005 Express. The SSMSE and VB 2005 Express are in my Windows XP Pro PC that is part of our NT 4 LAN System in our office. I read the article "How to configure SQL Server 2005 to allow remotre connections" in http://support.microsoft.com/kb/914277/ about (i) "Enable remote connections for SQL Server 2005 Express", (ii) Enable the SQL Server Browser service", (iii) Create exception in Windows Firewall, and (iv) Create an exception for the SQL Server Browser service in Windows Firewall. I entered the SQL Server Surface Area Configuration and I could not decide what options I should take for doing the non-User-Instance/ADO.NET 2.0 programming from my VB 2005 Express. I have the following questions on the page of "Minimize SQL Server 2005 Surface Area":
(1) I saw "Configure Surface Area for localhost [change computer]". I clicked on [change computer] and I saw the
following: Select Computer
The Surface Area Configuration of this surface area of this computer or a remote computer.
Specify a computer to configure: O Local computer
O Remote computer
Should I choose the "Local computer" or the "Remote computer" option?
(2) Below the "Configure Surface Area for localhost [change computer]",
I clicked on "Surface Area Configuration for Service and Connections", Select a component and then configure its services and connections: |-| SQLEXPRESS
|-| Database Engine
Service
I picked => Remote Connection
On the right-hand side, there are: O Local connections only
O Local and remorte connections
O Using TCP/IP
O Using named pipes only
O Using both TCP/IP and named pipes
Should I choose O Local and remorte connections and O Using named pipes only?
Please help and tell me what options I should choose in (1) and (2).
Thanks in advance,
Scott Chang
As I said in the subject I've a problem trying to restore a backup of a previous db created in sql 2000 server
When I try to do it I recive the following message:
____________________________________________________________________________________
System.Data.SqlClient.SqlError: Il set di backup include il backup di un database diverso dal database 'musica2007' esistente. (Microsoft.SqlServer.Express.Smo)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&LinkId=20476
------------------------------
Program Location:
in Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQueryWithMessage(StringCollection queries, ServerMessageEventHandler dbccMessageHandler, Boolean errorsAsMessages)
in Microsoft.SqlServer.Management.Smo.BackupRestoreBase.ExecuteSql(Server server, StringCollection queries)
in Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
____________________________________________________________________________________
What should I do? What's the probem? I've already tried to look for the solution in other messages but I didn't find anything..... Thanks for help,,, by Luke
I've seen the following error posted when people try to connect to their server via their applications but didn't see anyone having problems when trying to connect with SQL Server Management Studio Express. Am I missing something here? This is the error:<<An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)>>The server is not remote so I don't see why I need to enable remote connection. I am also using the default connection settings.
View 3 Replies View RelatedHello,
I am trying to "import" a .dbf into SQL Server Compact Edition, but I cannot find a way to do so. Can someone tell me how this is done?
On my home machine without permanent network connections enabled, I cannot get the Management Studio connect to the database server. Always get this error:
Cannot connect ot MPLIAMSQLEXPRESS
Additional Information:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, erro: 26 - Error Locating Server/Instance Specified)(Microsoft SQL Server)
I have used the SQL Surface Area Configuration Tool to reset the defaults to allow remote connections, stopped and restarted the server, but still get the same message.
Please help.
Hi all,
In the last one and half years, I used the Northwind Database in SQL Server Management Studio Express (SSMSE) to learn the programming of SqlConnections, Data sources, Database Exploere, ADO.NET 2.0, etc. via VB 2005 Express.
The Northwind Database in my SSMSE got lost very often, but I was not aware of it. How can I know where the Northwind Database is used or processed by my VB 2005 Express projects that were the examples of some tutorial books or my trial projects? How can I release the Northwind Database back to my SSMSE from the VB 2005 Express projects? Please help and advise.
Thanks in advance,
Scott Chang
hi
guide me how to work and design backend in sql server 2005 management studio express
Hello,
I have installed SQL 2005 Express Management Studio several times and It fails to completely install. I get a message that SQL Server Express 2005 x84 did not install properly. I tried to uninstall it and reinstall it but I get the same problem. My Visual Web 2005 Express Edition and Visual Basic 2005 Express gives an error when I try to add a new database. The error is: "Failed to generate instance of SQL server due to a failure copying database files. The connection will be closed. Does anyone know what I can do to resolve this? My computer system meets the hardware requirements.
Sincerely,
Pam
I am trying to install SQL Server Management Studio Express(SSMSE) on Windows XP SP2.
But installtion does not get completed. It goes unto last step in the installation and then rollback itself. At the lat screen it displayes the message that "SQL Server Management Studio Express installation could not be completed as it was intreupted". Though I did not do any thing? I tried at least 20 times but it ends up here.
I followed all the steps as defined in SQL Server Express setup on Microsoft site?
Any help would be appreciated.
ADK
Hello,I've installed SQL Server Managment Studio Express 2005 in my laptop and I already have Visual Studio 2005 Express in my system. The problem I m facing is that when I open the SQL Management Studio so it is not logging in using both the Windows Authentication method nor the SQL Authentication, I've Windows XP Professional in my system and I've set No Password on Windows. Please tell me, what's the Login and Password of SQL and secondly what's the solution to this problem.Thanking You.SAAD.
View 3 Replies View RelatedI'm trying to open a SQL Express database (MDF) with SQL Server 2005 management Studio. Is that possible? I'm getting the following error:
The specified file is either not a SQL Server Compact Edition file or is corrupt.
It opens fine in Visual Studio 2005.
Also, is it possible to run a script in Visual Studio 2005? If so, how?
Thanks, Alex
Can I use SQL 2005 Management Studio Express to manage my SQL Server 2000 dbs? Currently I have SQL Enterprise Manager Version 8.0 installed and was thinking I'd like to install and use SQL 2005 Management Studio Express instead. This doable?
View 4 Replies View RelatedHi all,
I have installed SQL server 2005 express edition with SQL server Management studio express (SSMSE).
I have installed also SQLce and I would know how I can manage sql compact edition databases (.ldf) with sql SSMSE, if it is possible!
I would be grateful if you could explain it trought a detailed guide (I am a beginner user of sql server tools) or trought a link to useful sites.
I'm Looking forward for your reply and still trying...
Alessandro
I have two databases in sql server management studio and I want to move tables from one into another. Is this possible? and how? Thanks
Andrew
I am unable to connect to my database on a VPS server using server management studio express. I am able to ping the server. can connect to a local database but i have the same issue as others
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server
have set the server so that it will allow remote connections and reset the server just to make sure that it has been implemented.
when i use osql in command prompt to make a test connection it tells me this
[SQL Native Client]Named Pipes Provider: Could not open a connection to SQL Server
[SQL Native Client]Login timeout expired
[SQL Native Client]An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
on this forum it says to perform a ping and and an a ping a- to my server which does work.
Have been working on this for 3 days and can't figure it out.
Even had a guy in New Zealand who is usually my messiah of SQL and he can't figure it out so I'll be impressed if someone knows the answer.
I will buy a crate of beer for the person who solves this for me as this problem is costing me money! Maybe even 2 if done by end of tomorrow 6pm GMT!
If you don't want the beers, i will be more than happy to give a virtual pat on the back. :-)
If you need any more info, i will be watching this thread like a hawk so i'll happily answer any questions that you may have if i can.
Thanks in advance
I installed SQL Server Express 2005 and was able to install the sample databases. I have been working through the on-line tutorial. In Lesson 4 of the tutorial it instructs you to select File, New, Project. However, when I select File, New there is no Project choice listed. Have I failed to install something correctly?
Thanks for any assistance.
I am still a bit of a noob with SQL, but, when I use Enterprise Manager with my SQL 2000 server at the office, it is pretty simple to import data from pretty much any data source. I have not been able to locate the Transform facility in the 2005 express software that I downloaded onto my home pc (to help me learn SQL). Did I not install something that I need? or am I just missing what I am looking for? The net question is, how do I import data?
Thanks,
Tom
Ok so here's what happened:
Installed Server 2008 (64bit)
Installed VS2008 (+SQL 2005 Express, by default)
I've always installed SQL 2005 Dev (including the SQL Management Studio) before installing VS. Now I am trying to install just the management studio on this machine without success.
I tried installing the SQL workstation tools package from the SQL 2005 DVD but the installer detects the tools installed by SQL express (osql, etc.., but no management studio GUI) and the installer refuses to install anything else. I also tried downloading the separate installer for SQL management studio but it doesn't like something also: first thing the installer does is display this mesage:
"Installation of this product failed because it is not supported on this operating system For more information on supported configurations, see the product documentation."
Any way to do this without having to reinstall VS?
Thanks.
Can I connect to remote SQL 2005 server through SQL Server Management Studio Express? I always get a error code 18456 when I try to connect to SQL 2005 server through SQL Server Management Studio Express. I'm sure I enter correct username and password!
View 3 Replies View RelatedHi,
I am very new to SQL Compact. I am trying to create one database which can work on the desktop application and also on a pda application. I want to create the database but I am unable to start without Management Studio. Can you guide me to the right tools so that I can create database, view it and manage it use something like Management Studio Express.
Also one more question is if my database needs to be at both places on the desktop and on pda how can i synchronise them. PDA will take using c# application data from RFID scans and then i need to sync that database on the desktop so that reports and other info can be generated from the desktop c# application. How to do this?
Please can you guide me to any webcasts or labs so i can clarify my doubts about the design.
Regards
Trushar
Can I use SQL Server 2005 Everywhere Edition with Sql Server Management Studio Express?
If not, what do I need to access sdf file?
Thanks
What is the difference between MS SQL Server Management Studio Express and MS SQL Server 2005 Express Edition? i download SQLEXPR.EXE, do i also need to download the other?
thank you.
Hi all,
I want to do SQLCLR by Connecting to SQL Express User Instances in Management Studio via VB 2005 Express and I have read the following articles and books:
(i) Connecting to SQL Express User Instances in Management Studio in http://blogs.msdn.com/sqlexpress/archive/2006/11/22/connecting-to-sql-express-user-insta...
(ii) Managing SQL Server Express with SQL Server 2005 Management Studio Express Edition in http://www.microsoft.com/technet/sql/2005/mgsqlexpwssmse.mspx
(iii) Chapter 16 - Going Beyand Transact-SQL: Using the SQL Common Language Rutime (SQLCLR) in Microsoft SQL Server 2005 Express Edition for Dummies
(iv) Chapter 21 - Working with the Common Language Runtime in Microsft SQL Server 2005 Programming for Dummies
(v) Chapter 4 - Introduction to Common Language Runtime (CLR) Integration in Programming SQL Server 2005 by Bill Hamilton.
I want to create an SQLCLR project "HelloWorld" by Connecting to SQL Express User Instances in Management Studio via VB 2005 Express. But I am still not sure how to get it started, because I do not understand the following things:
(1) Pipe Name for a User Instance, (2) Enabling (or Disabling) the CLR by using Transact-SQL, (3) Creating a Transact-SQL script, (4) Creating an Assembly, (5) Creating a backup device, etc. I need to see some simple examples of SQLCLR by Connecting to SQL Express User Instances in Management Studio via VB 2005 Express. Please help and tell me where in the websites I can find them.
Thanks in advance,
Scott Chang
I have a database in my "App_Data" folder of my visual studio project. I can view it fine in Visual Studio's built-in tools for managing a database attached to a solution. However i recently started playing around with the SQL Server Management Studio Express program. When i attach my database to Management Studio, and try to run my program it crashes. I think it might be a permissions error?!? When i detatch it and reattach it in visual studio it runs fine again. Any suggestions? ThanksJason
View 1 Replies View Related
I have recently installed the SQL Server Management Studio Express but I do not find Management Tools in order to create scheduled backups and shrinking of the databases. I was under the impression that this should be included in the Management Studio. I use the SQL 2005 Express for smaller customers who run the SQL on a desktop unit. I need a way to backup the data to a server machine for backup purposes. I have uninstalled and reinstalled to no avail.
Hi there,
I am just starting to learn SQL 2005 Express. After opening the Management Studio Express, I right Click on the Databases node and create new database. then create a name etc. The problem is that when I click ok to create the new database, I get a warning saying that Input a filename. However when I click on filename (after filepath) it is greyed out and I cant add a filename.
Does anyone know how to remedy this?
Regards
DML
I have just downloaded VB Express, that comes with SQL Express
In order to manage and use SQL databases it seems I have to use SQL
Studio Mgt Tool. But, where is it? I can only see Configuration Tools,
but not any Mgt tool or DB Engine......
Maybe my installation is incomplete?
thanks
I currently have SQL Server Management Studio Express 2005 and would like to upgrade my machine to SQL Developer 2005 as easily as possible. Keeping my databases and such.
Any recommendations on the best way to do this would be greatly appreciated.
thanks!
Hi,
I've downloaded the sql server 2005 management studio express executable to my second hard drive, as there is no room on my main drive
However, when I try to install, the program shows me both drives, and shows that there is not enough room on my main drive, but it does not allow me to change the installation to my second drive.
I have previously installed the main sql express product to my second drive with visual studio. There's loads of room.
Can anyone give me a clue as to why this might be happening.
Thanks
John
When I downloaded/started using Visual Web Developer I was under the impression that I needed to install SQL Server Management Studio Express in order to create/manage databases, and to provide the engine to access the data.
Since then I have found tutorials and have successfully created/used databases solely from within Visual Web Developer. I'm assuming that Visual Web Developer includes a database engine, much like the webserver that is included. (This is an awesome thing).
When I tried to upload my web application with database to my production server, the database would not work, it started working after I installed SQL Server Management Studio Express on the server.
Is it my understanding that you need SQL Server Management Studio Express if you do not have Visual Web Developer Express installed in order to provide the data access engine?
Also, I am unable to "attach" my Visual Web Developer Express created database to SQL Server Management Studio Express. Are there any posts that provide more information about this topic?
The only reason I'm asking is that I have extra whitespace on the end of my text fields, and I thought ANSI_PADDING was turned on. I do not see the option in Visual Web Developer Express, but have found it in SQL Server Management Studio Express.
Hi,
I am a newbie so i apologies beforehand for any mistakes i make on this forum.
Anyway, i created an asp.net website using the MS Visual Web developer tool. This has a couple of SQL SERVER databases within it.
I then latervinstalled the SQL SERVER management studio express in order to manage the SQL SERVER DBs that i had as part of my website but they do not appear within the management studio db list.
As this is the express version, is there anyway of importing the existing SQL SERVER dbs that i have to the management studio so i can manage them from there?
Regards,
Shuja.
Really confused ... I created 2 tables in a VB Express program (which went well). Problem is that I can't see/find those tables with MSME. I don't really understand how to connect the MSME to where the tables are. I created the tables under My DocumentsData and they are DBapp.mdf + DBapp_log.LDF and the tables are Items and Preferences. The VB application can "see" the tables OK.
Do I need to move the tables to C:Program FilesMicrosoft SQL ServerMSQL.1MSQLDATA (like the Adventureworks installation which I haven't done) or what?
Please help a newbie
Thanks
George