Bulk Load Failure
May 10, 2006
I have numerous jobs that use the Bulk Load object to transfer data. Once or twice a day, one of the jobs will fail with the folowing error:
Error: 0xC0202009 at Data Flow Task, SQL Server Destination [73]: An OLE DB error has occurred. Error code: 0x80040E14.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Could not bulk load because SSIS file mapping object 'GlobalDTSQLIMPORT ' could not be opened. Operating system error code 8(Not enough storage is available to process this command.). Make sure you are accessing a local server via Windows security.".
Error: 0xC0202071 at Data Flow Task, SQL Server Destination [73]: Unable to prepare the SSIS bulk insert for data insertion.
After receiving this error, any job that uses the bulk load object that attempts to run will fail with the same error. After restarting the SQL Server service, all jobs will run ok.
I can find virtually nothing on this particular error so if you have seen it before please let me know. This has become a maintenance nightmare!
View 23 Replies
ADVERTISEMENT
Jan 17, 2008
Im having some issues with bulk insert.
This is the table:
CREATE TABLE [dbo].[tmp_GA_status](
[GA_recno] [int] NOT NULL,
[GA_desc] [varchar](40) NULL
)
This is the file (unicode):
1|"test1"
2|"test2"
3|"test3"
4|"test4"
5|"test5"
6|"test6"
7|"test7"
8|"test8"
and this is the sql:
bulk insert tmp_GA_status from 'C: empTextDumpGA_status.dta'
with (CODEPAGE='RAW', FIELDTERMINATOR='|', ROWTERMINATOR='
', DATAFILETYPE='widechar')
so yeah, pretty simple. But whatever I do I get this;
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 2 (GA_desc).
So what am I doing wrong ?
View 13 Replies
View Related
Jun 29, 2015
I'm trying to use Bulk insert for the first time and getting the following error. I think it might have something to do with my Format File and from the error msg there's a conversion error for the first column. In my database the Field is nvarchar(6) so my best guess is to use SQLNChar for the first column. I've checked the end of each line is CR LF therefore the is correct for line 7 right?
Msg 4863, Level 16, State 1, Line 1
Bulk load data conversion error (truncation) for row 1, column 1 (ASXCode).
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
BULK
INSERTtbl_ASX_Data_temp
FROM
'M:DataASXImportTest.txt'
WITH
(FORMATFILE='M:DataASXSQLFormatImport.Fmt')
[code]...
View 5 Replies
View Related
Nov 14, 2007
I get the error:
Package Load Failure
Package 'Microsoft.SqlServer.Tools.PublishWizard.VSCommands.MenuCommandsPackage, MenuAndCommands, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bg3856ad364e35' has failed to load properly ( GUID = {A38CF415-6AD2-45F6-8132-9CC33EBE0629}).
I get this error after I have opened VS and then open the Server Explorer Window.
I have been using VS2005 Professional since December of 2005 and have never encountered this before. I have never had a beta version of anything on this PC. I have been searching the Net but haven't found a solution. At this point, I haven't tried reloading VS because even if it does fix it, what is the guarantee that I will not encounter it again. I would rather find and fix the cause.
Does anyone have any ideas?
Additional: I have now uninstalled and reinstalled VS2005 and SQL Server 2005 including service packs and am still getting the error.
Additional:
When I ran devenv.exe, the section of the resulting log referencing the GUID indicated an invalid Package Load Key:
<entry>
<record>56</record>
<time>2007/11/15 15:23:53.647</time>
<type>Information</type>
<source>Microsoft Visual Studio</source>
<description>Entering function CVsPackageInfo::HrInstantiatePackage</description>
<guid>{A38CF415-6AD2-45F6-8132-9CC33EBE0629}</guid>
</entry>
<entry>
<record>57</record>
<time>2007/11/15 15:23:53.647</time>
<type>Warning</type>
<source>Microsoft Visual Studio Appid Stub</source>
<description>CheckPackageSignature failed; invalid Package Load Key</description>
<guid>{A38CF415-6AD2-45F6-8132-9CC33EBE0629}</guid>
</entry>
<entry>
<record>58</record>
<time>2007/11/15 15:23:53.663</time>
<type>Warning</type>
<source>Microsoft Visual Studio Appid Stub</source>
<description>CheckPackageSignature failed; invalid Package Load Key</description>
<guid>{A38CF415-6AD2-45F6-8132-9CC33EBE0629}</guid>
</entry>
<entry>
<record>59</record>
<time>2007/11/15 15:23:53.663</time>
<type>Warning</type>
<source>Microsoft Visual Studio Appid Stub</source>
<description>CheckPackageSignature failed; invalid Package Load Key</description>
<guid>{A38CF415-6AD2-45F6-8132-9CC33EBE0629}</guid>
</entry>
<entry>
<record>60</record>
<time>2007/11/15 15:23:53.663</time>
<type>Warning</type>
<source>Microsoft Visual Studio</source>
<description>Appid denied the loading of package</description>
<guid>{A38CF415-6AD2-45F6-8132-9CC33EBE0629}</guid>
</entry>
View 1 Replies
View Related
Jul 30, 2007
Hi All,
Im bulk loading a ton of data into MSSQL SERVER 2005 Standard Edition. I used to do this process in version 2000. It seems there is some more overhead in 2005. Is there a way to drop logging to almost null to speed up insert?
This is my current sql statment to load data.
EXEC sp_dboption 'my_stuff', 'select into/bulkcopy', 'true'
SET ANSI_WARNINGS OFF
BULK INSERT mystuff.dbo.[v1]
FROM 'c:myfile.txt'
WITH
(
FIRSTROW = 1,
FORMATFILE = 'c:scriptsv1.fmt',
MAXERRORS=2000,
ROWS_PER_BATCH=100000
)
Thanks,
Mike
View 2 Replies
View Related
Dec 2, 2004
I have a file with 21345 records in it and it is a tab delimited file.When I use bulk insert on that file to a table it is inserting only the first 10680 records and is not loading the rest of the records but when I use the DTS package to insert the file to the table it is inserting all the 21345 records into the table.
I do not want to use DTS ,I want to use the bulk insert.This is the first time I have ever encountered such a strange thing happening.Can someone please put some light into it and tell me what could be the problem . I would really appreciate it.
Thanks
View 4 Replies
View Related
Aug 9, 2006
hi all,
I am getting this error when I try to insert an image or update the database image. I am the owner of the database. I am trying to insert or update using an ASP.Net form (published) from a remote computer. Recently I changed a few permissions (added a user with login name and password) to that database to allow Reporting services access to all my group employees. Earlier everything was working absolutely fine. But now it is denying permissions when I try to insert or update the data when I access it from a remote system. I am able to get the data incase I do a get using the ID. But if I start the application on the localhost (Start Debugging) then its working fine and i am able to insert the data. Can someone suggest what could be wrong?
Check it out!!!! There is an exception!!!!! System.Data.SqlClient.SqlException: You do not have permission to use the bulk load statement. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at _Default.Insert_Method()
Thanks
View 2 Replies
View Related
Jul 17, 1999
Is there a way to use the script file from one database to load all the stored procedures into another database? I have used DTS to do them one at a time since the SQL task is very limited in the amount of text that it will handle. There has to be a way to use a script filel with all of the procedures in it to load a new database. Any suggestions are appreciated.
View 2 Replies
View Related
Jun 18, 2008
i have the stored procedure...
ALTER procedure [dbo].[xmlpaths]
as
Declare @xml VARCHAR(MAX)
Declare @i as int
select @xml=BulkColumn from openrowset(bulk 'C:Documents and SettingsKasiDesktopote.xml', single_clob)as cse
EXEC sp_xml_preparedocument @i OUTPUT,@xml
Select * From OpenXML(@i,'/college/cse',2) With (name varchar(50), rollno int, year int)
i got the output...
but i want to give path as parameter during execution of procedure name. can anyone help me..
thanks in advance
View 1 Replies
View Related
Oct 30, 2014
I have a file which has * as the field delimiter and ~ as the record delimiter, but I don't know how much columns each row will have. Only known is the maximum which can be 15.
The file looks something like: A1*A2*A3*~B1*B2~C1*C2*C3*C4*C5~
SO I have created a table with 15 columns(since 15 can be the max) but now when I try to insert it to that table, I inserts only the entire file into 1 single column.
The command which I am using is: BULK INSERT tablename FROM filename WITH (FIELDTERMINATOR = '*' , ROWTERMINATOR = '~')
but this is not giving the correct output.
The output expected is
A1 A2 A3
B1 B2
C1 C2 C3 C4 C5
View 1 Replies
View Related
Jun 29, 2006
I am trying to configure a bulk table upload from a 2003 Access table to a matching table in SQL with SSIS. I can configure the source file but am unable to configure the destination. When I configure the SQL source and use SQL Native Client I get an error message of:
The selected connection manager uses an earlier version of a SQL server provider. Bulk insert requires a connection that uses a SQL server 2005 provider.
When I go through the new connection setup I don't see any available provider named like that. I believe the SQL server I am loading to is a 2003 version.
View 3 Replies
View Related
Jul 27, 2007
I need to execute the following:
SET QUOTED_IDENTIFIER ON
SET ARITHABORT ON
SET CONCAT_NULL_YIELDS_NULL ON
SET ANSI_NULLS ON
SET ANSI_PADDING ON
SET ANSI_WARNINGS ON
SET NUMERIC_ROUNDABORT OFF
before I do a bulk load because the table I am inserting into has an indexed view created on it. Whats the best way to set these options prior to a bulk load?
View 8 Replies
View Related
Jun 2, 2006
Hi,
I am having problem in connecting to the report server in SQL Server Management Studio. An msg said "Provider load failure" is displayed but i could deploy reports in Visual Studio and view them in IE browser by going to http://localhost/Reports.
Any ideas?
Thanks,
Jane
View 9 Replies
View Related
Jan 16, 2007
I have a package that is failing because of a truncation error. Now, by default (and I leave this for ALL my packages) if one row fails processing the entire package should fail and nothing gets loaded into db. But instead I am actually getting a partial db load.
I have confirmed the "Rows per btach" value (blank) and the "Maximum insert commit size" value (0) for the OLE DB Destination Editor so I have no idea what is going on. Are there any other properties I should be checking?
Thanks.
Jason
View 6 Replies
View Related
Feb 7, 2007
I am receiving the "Provider Load Failure" message when I start the SSRS Configuration Tool on my report server.
As suggested on other threads, I have checked the reportingserviceswmi.dll and it is version 2005.90.1399.0 and the WMI service is running.
Any suggestions on what to do next?
View 1 Replies
View Related
May 2, 2007
I need to update a number of sql server tables, the data sources for these coming from a number of stored procedures. I want a generic way of getting the data and then passing this data to the tables.I am thinking of doing this for each table:Populating a datasetWriting this dataset to XMLUsing SQLXML Bulk Load to pass this XML to the database to updateI can create the xml data file by:
dataset.WriteXml("C:data.xml")The problem I have is that the example (http://support.microsoft.com/default.aspx/kb/316005/en-us) I looked at relies on the schema being defined:<?xml version="1.0" ?><Schema xmlns="urn:schemas-microsoft-com:xml-data" xmlns:dt="urn:schemas-microsoft-com:xml:datatypes" xmlns:sql="urn:schemas-microsoft-com:xml-sql" > <ElementType name="CustomerId" dt:type="int" /> <ElementType name="CompanyName" dt:type="string" /> <ElementType name="City" dt:type="string" /> <ElementType name="ROOT" sql:is-constant="1"> <element type="Customers" /> </ElementType> <ElementType name="Customers" sql:relation="Customer"> <element type="CustomerId" sql:field="CustomerId" /> <element type="CompanyName" sql:field="CompanyName" /> <element type="City" sql:field="City" /> </ElementType></Schema>Is there any way I can create the schema 'on the fly' similar to how I did for the data source file.As I could then pass these files to the database:objBL.Execute ("schema.xml","data.xml");
View 1 Replies
View Related
Apr 22, 2004
Is that possible to load files (*.bmp, *.jpg etc) to table (field type IMAGE) using BULK INSERT?
Or is it better to do it otherwise?
Thanks
View 5 Replies
View Related
Nov 4, 2015
I have a VB.NET scheduled job as a task scheduler ( windows 2012) that calls a stored procedure that bulk inserts. I have added the user in the server role "bulkadmin" yet I get the "You do not have permission to use the bulk load statement error"
System.Data.SqlClient.SqlException (0x80131904): You do not have permission to use the bulk load statement.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream,
[code]....
View 0 Replies
View Related
Jul 13, 2007
hello,
I am working on an application that will import data from ascii tab-delimited files into corresponding tables in a sql server 2005 express db.
The problem I am facing is that i get errors when running bulk insert.
The tables all have one extra column which is a primary key identity value.
Additionaly, the column data types include:
int, bigint, nchar, nvarchar, datetime and bit
an example table looks like this:
CREATE TABLE [dbo].[counties](
[id] [int] IDENTITY(1,1) NOT NULL,
[InternalID] [int] NULL,
[Active] [bit] NULL,
[Code] [nchar](10) COLLATE Greek_CI_AS NULL,
[Description] [nvarchar](50) COLLATE Greek_CI_AS NULL,
[StartDate] [datetime] NULL
)
An example data file looks like this:
InternalIDActiveCodeDescriptionDate
1 101Αι�„�‰Î»Î¿Î±ÎºÎ±��ν16/11/1909
2 102Α��γολίδο�‚29/04/1949
3 103Α��καδία�‚16/11/1909
4 104Ά���„η�‚ 16/11/1909
5 105Α�„�„ική�‚ 26/07/1943
So, what I do is:
1. for each table I generate a character format file with the following command:
bcp mydb..table format nul -f tableformat.fmt -c -T -S hostsqlexpress
2. I modify the format file to exclude the first identity column by zeroing the field length, the column order and terminator. The resulting format file looks like this:
9.0
6
1 SQLCHAR 0 0 "" 0 id ""
2 SQLCHAR 0 12 " " 2 InternalID ""
3 SQLCHAR 0 3 " " 3 Active ""
4 SQLCHAR 0 20 " " 4 Code Greek_CI_AS
5 SQLCHAR 0 100 " " 5 Description Greek_CI_AS
6 SQLCHAR 0 24 " " 6 StartDate ""
3. I run BULK INSERT
BULK INSERT tablename
FROM dataFile
WITH (
FIRSTROW=2,
FORMATFILE = formatFile
DATAFILETYPE = 'char'
FIELDTERMINATOR=' '
ROWTERMINATOR='
'
KEEPNULLS
)
As a result of the above configuration I get this:
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 2, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 3, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 4, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 5, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 6, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 7, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 8, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 9, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 10, column 6 (EndDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 11, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 12, column 6 (EndDate).
Msg 4865, Level 16, State 1, Line 1
Cannot bulk load because the maximum number of errors (10) was exceeded.
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
What am I doing wrong here? With previous configurations I got errors about the BIT fields. In general, I only receive errors... The only thing that worked was with a table that only had nvarchar. Is there a fundamental mistake in what i do? I have read many posts, but nothing specific about handling different data types with bcp and bulk insert.
I would appreciate any help, as I am running out of time
Thank you.
Dimitris Chrysomallis
View 4 Replies
View Related
Jul 13, 2007
Hello,
I am working on an application that will import data from ascii tab-delimited files into corresponding tables in a sql server 2005 express db.
The problem I am facing is that i get errors when running bulk insert.
The tables all have one extra column which is a primary key identity value.
Additionaly, the column data types include:
int, bigint, nchar, nvarchar, datetime and bit
an example table looks like this:
CREATE TABLE [dbo].[counties](
[id] [int] IDENTITY(1,1) NOT NULL,
[InternalID] [int] NULL,
[Active] [bit] NULL,
[Code] [nchar](10) COLLATE Greek_CI_AS NULL,
[Description] [nvarchar](50) COLLATE Greek_CI_AS NULL,
[StartDate] [datetime] NULL
)
An example data file looks like this:
InternalIDActiveCodeDescriptionDate
1 101Αι�„�‰Î»Î¿Î±ÎºÎ±��ν16/11/1909
2 102Α��γολίδο�‚29/04/1949
3 103Α��καδία�‚16/11/1909
4 104Ά���„η�‚ 16/11/1909
5 105Α�„�„ική�‚ 26/07/1943
So, what I do is:
1. for each table I generate a character format file with the following command:
bcp mydb..table format nul -f tableformat.fmt -c -T -S hostsqlexpress
2. I modify the format file to exclude the first identity column by zeroing the field length, the column order and terminator. The resulting format file looks like this:
9.0
6
1 SQLCHAR 0 0 "" 0 id ""
2 SQLCHAR 0 12 " " 2 InternalID ""
3 SQLCHAR 0 3 " " 3 Active ""
4 SQLCHAR 0 20 " " 4 Code Greek_CI_AS
5 SQLCHAR 0 100 " " 5 Description Greek_CI_AS
6 SQLCHAR 0 24 " " 6 StartDate ""
3. I run BULK INSERT
BULK INSERT tablename
FROM dataFile
WITH (
FIRSTROW=2,
FORMATFILE = formatFile,
DATAFILETYPE = 'char',
FIELDTERMINATOR=' ',
ROWTERMINATOR='
',
KEEPNULLS
)
As a result of the above configuration I get this:
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 2, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 3, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 4, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 5, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 6, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 7, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 8, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 9, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 10, column 6 (EndDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 11, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 12, column 6 (EndDate).
Msg 4865, Level 16, State 1, Line 1
Cannot bulk load because the maximum number of errors (10) was exceeded.
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
What am I doing wrong here? With previous configurations I got errors about the BIT fields. In general, I only receive errors... The only thing that worked was with a table that only had nvarchar. Is there a fundamental mistake in what i do? I have read many posts, but nothing specific about handling different data types with bcp and bulk insert.
I would appreciate any help, as I am running out of time
Thank you.
Dimitris Chrysomallis
View 5 Replies
View Related
Jul 31, 2015
I have a Bulk insert that doesn't load but doesn't error,
SET @SQL= 'BULK INSERT dbo.LexisNexis_import_BANKRUPTCY FROM ''' + @ImportFile + ''' WITH (FIRSTROW = 2, FORMATFILE = ''' + @FormatFilePath + ''' )'
EXEC(@SQL)
All columns in the csv are double quoted so I stip them out in a format file.There is data in the source file. Why this Isn't working?
View 4 Replies
View Related
May 22, 2006
All,
Can anyone shed some light on this problem:
Using the same laptop and credentials I can successfully load Report Builder ONLY from the LAN-side of the firewall. However, if I reconnect using my Sprint AirCard I cannot load Report Builder; I get the now infamous "The remote server returned an error: (401) Unauthorized."
What ports are used by Reporting Service?
Thanks,
Brian
View 3 Replies
View Related
Sep 29, 2006
Hi All,I have an asp.net 2.0 app that needs to bulk load data from an xml file into a Sql Server (Express) table. Is there an easy way to do this?Thanks,Claude.
View 3 Replies
View Related
Jan 27, 2015
For Bulk Load requests in SQL server, Are there any specific profiler event? Like the one we have for RPC RPC:Starting and for Batch Requests, we have SQL:BatchStarting.
Are Bulk Load requests that are being monitored through Profiler captured as SQL:Batch... events at the backend?
Are there any new features added in 2012 or 2014 to identify a Bulk request submitted through bcp.exe utility or any other sqlbulkcopy program?
View 1 Replies
View Related
Mar 25, 2007
I want to import the contents of a remote database every morning via a Web service to populate a data mart. I am looking for the most efficient way to do this. Step 1 is to use the Web Service Task in SSIS to grab the data and save to an XML file (since the content is far too large to store in the String data type).
For step 2, I can either use the SQLXMLBulkLoad object in VB Script to read in the file and populate the tables. Or I can using the XML Source object in Integration Services. It is clear that SQLXMLBulkLoad is the most efficient way to load data, but is the XML Source object in SSIS just a graphical representation of the SQLXMLBulkLoad object, or is it something else entirely that is inefficient because it requires loading of the XML content entirely into RAM before it can process the XML?
Any other suggestions are welcome.
SQL Server 2005 SP2.
Thank you,
Mike Chabot
View 3 Replies
View Related
Dec 13, 2007
Hi,
I am new to SSIS but i have avg working knowledge in sql.
My problem is as follows ,I have a text pipe dilimited file in some folder and the number of columns and the name of the column is not consistant. It can have N number of column and it can have any column names. I need to load this text file data into a sql table. All that i want is to load this file to SQL Database with some temp name. Once i get the table in SQL Database, i can match the column names of both taget table and this temp table and only push those column which matches with the target table. For this i can frame Dynamic SQL. This part is clear to me.
Now the problem is , I developed a SSIS pacakge to push the text file to SQL Table. I am able to do this. But if i change the column names or added new column SSIS is not able to push the new columns. Is this functionality available in SSIS, is it can be dynamic like this?
I hope i am clear with my prob... if need any clarification please let me know
thanks in advance
Mike
View 3 Replies
View Related
Dec 13, 2006
I'm trying to do the above using the Reporting Services Configuration Manager and I can't even connect. I get the error Provider Load Failure.
Anyone got any pointers?
View 13 Replies
View Related
May 4, 2007
I have a dataflow step (flat file -> Sql Server Destination), with a batch size of 2500 records. It fails consistently around 3.6 million records in, with only this error -
[SQL Server Destination [4076]] Error: Unable to prepare the SSIS bulk insert for data insertion.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "SQL Server Destination" (4076) failed with error code 0xC0202071. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0202071. There may be error messages posted before this with more information on why the thread has exited.
[Flat File Source [1]] Error: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Flat File Source" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
How can I debug this further to see what's going wrong?
View 1 Replies
View Related
Nov 1, 1999
Using BULK Insert with a format file I am receiving the following message:
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'STREAMS' reported an error. The provider did not give any information about the error.
The statement has been terminated.
I am running SQL Server 7.0 w/ SP1 applied. The same data file and format files work fine if I use bcp.
The data file contains fixed length records.
Any ideas what the problem is?
View 2 Replies
View Related
May 15, 2014
Is there a switch I can use to force a bulk insert and if data is truncated, I'm good with that. The truncated data, in this case, is not data I can use anyway if it is long enough to be truncated.
I need to keep the field at VARCHAR(23) and if I expand it, I won't be able to join on it after the file load completes. I'd like the data to be inserted (truncated if need be) and then I'll deal with the records that are truncated after I load the file.
View 5 Replies
View Related
May 19, 2015
SELECT from openrowset(BULKÂ 'SERVERNAMEsomepathsomefile.csv'... fails while SELECT from openrowset(BULK 'c:somepathsomefile.csv' ... works.
I am running the task as a specific sql server user. If I run the same query in management studio using execute as login='batchuser', it also works for any path.
How can I make this work without an extra step moving the data to the local server? Because that would cause extra administration.
View 6 Replies
View Related
May 14, 2007
I can't use DTS nor DTSwizard as I need to put it in a .sql and run it through a command line via .bat file (it's more for the users).
Each row ends with an EOL character, the fields are all fixed width, but I have a little problem here, some rows are empty but just with a EOL character.
How shall I go about it?
many thanks! :D
View 2 Replies
View Related
Aug 20, 2015
I am looking for solution for "Communication link failure" Â since many months in google but no luck, am running an SSIS package to load data. job failing many times with error 'Communication link failure', searched every where but found nothing.
Below is the complete error description when job failed.
OS - Windows server 2008 R2 Enterprise Edition
RAM - 198GB
 SQL server 2008 R2 Enterprise Edition and error description is below,
Started: Â 6:22:40 AM Â Error: 2015-08-19 18:50:32.70 Â Â Code: 0xC0202009 Â Â Â
Source: Data Flow Task Lookup [193] Â Â Â
Description: SSIS Error Code DTS_E_OLEDBERROR. Â An OLE DB error has occurred.Â
Error code: 0x80004005. Â An OLE DB record is available. Â
[Code] ....
View 5 Replies
View Related
