bulk insert SCORPIO_STAGE_BULK_DATAPDCC from 'd:BulkTest
onmech_stat_apd_clark_credit.dat' with (formatfile = 'd:BulkTestDATAPDCC.fmt')
go
alter procedure jason_test_exec
with execute as 'bulk_insert_test_jcb'
as
bulk insert SCORPIO_STAGE_BULK_DATAPDCC from 'd:BulkTest
onmech_stat_apd_clark_credit.dat' with (formatfile = 'd:BulkTestDATAPDCC.fmt')
go
Then, log into SQL Server via management stuido as the SQL user "bulk_insert_test_jcb" this user has server-level bulk admin rights and execute rights on both of these stored procs:
exec jason_test
This works
exec jason_test_exec
gives:
Msg 4834, Level 16, State 1, Procedure jason_test_exec, Line 4
You do not have permission to use the bulk load statement.
Can you help me with this? Why is the user prevented from running this bulk insert inside the stored proc with "execute as" ? The profiler trace from both of these stored procs have identical results for the SP: StmtStarting event.
I'm trying to do a BULK INSERT into a SQL Server 2005 db from an aspx page. When I try to run the page, to insert into [myTable], I get:The current user is not the database or object owner of table 'myTable'. Cannot perform SET operation.But here's the kicker: if I use Server Management Studio to log into the same database, using the same credentials, and run the same query, it works fine.My connection string looks like this:connectionString="data source=myLocalMachine; initial catalog=myCatalog; user=joe; password=joe;" providerName="System.Data.SqlClient"Can anybody tell me why it works when I log in via SMS, but not when I try the same query from my aspx? I'm totally stuck.Thanks!
Does anyone know what permissions are required to run bulk insert to a temp table?
I've got a procedure that creates a temp table and runs bulk insert on it. Only problem is that it seems that only the dbo can run it. Anyone else gets the following error: "The current user is not the database or object owner of table '#bulk'. Cannot perform SET operation."
Alternatively, does anyone know how to submit a scheduled job as a different user?
I've got my import system set up to create a scheduled job that kicks off right away. The job runs the 1st step which includes a bulk insert. The second step checks if the first step completely failed or not. Works great except that when the user runs the submission procedure, it comes back with that error.
Microsoft's brain-dead bulk insert command....aaargh. Every method around it's design flaws is blocked by another design flaw.
I am a newbie and i need to provide access for developer for him to use bulk insert ... on temp tables. what permission do i need to provide the developer i cannot provide bulkadmin permission to him what are the other ways to provide him the access.
At my customer's site they get this error trying to run a stored procedure I wrote that does BULK INSERT.
-2147217900 [Microsoft ODBC SQL Server Driver][SQL Server] You do not have permission to use the bulk load statement. upImportFromICPMSRaw 'GSADC1CompanyInstrumentOutputFilesICPMSNew185367.csv', tblFromICPMSRaw
The customer has SQL Server 2008 R2 Express installed
The connection string to the database works on everything else and it is the sa account with password
On my own development system with SQL Server 2008 R2 Standard, it works perfectly OK.
We would like to use the bulk insert function to import large CSV files into a SSE database however we have serious concerns regarding giving all our users these high privleges. Is there some way around this can we give them the privleges temporarily do the insert and take it away again or some other solution.
I'm just learning SSIS and I've hit my first bump. I am doing a bulk import from a tab delimited text file to an empty sql table that has a Idendity column defined. How do I tell the bulk insert task to skip that column when inserting from the text file. If I remove the identity column it imports the data fine, but I want to create the indentity column in the table too.
I have to update a field within a table of 60 records or so. Each record has a different field value. it's type varchar. i was given an excel file with the field values and was thinking of a bulk update like bulk insert, but i don't recall that it's possible that way.
Is the only way to create a table, bulk insert, then merge the two tables together with UPDATE?
Just wanted to see if there was an easier way to do it, otherwise i'll take the latter route. Thanks!
I have a table containing 8 million records. I need to replace 2 million of these records with a scaled down query that goes something like: SELECT 1, ShareholderID, Assets1 FROM MyTable (Yields appx. 200,000 recods) SELECT 2, ShareholderID, Assets2 FROM MyTable (Yields appx. 200,000 recods) . . . SELECT 10, ShareholderID, Assets1 + Assest2 + Assets3 + ... + Assets9 FROM MyTable (Yields appx. 200,000 recods)
Updates and cursors just seem to be too slow.
So far I have done the following, but was wondering if anyone could think of a better way. SELECT 6 million records that don't need to be deleted into a #TempTable Use statements above to select into same #TempTable DROP and recreate Original Table SELECT 6 + 2 million records INTO original table.
This seems rather convoluted. Is there a better approach? Would it be worth while to dump data to a file and use bcp / Bulk Insert
I receive the following error message when I try to use the Bulk Insert Task to load BCP data into a table:
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 4. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (overflow) for row 1, column 1 (rowno).".
Task failed: Bulk Insert Task
In SSMS I am able to issue the following command and the data loads into a TableName table with no error messages: BULK INSERT TableName FROM 'C:DataDbTableName.bcp' WITH (DATAFILETYPE='widenative');
What configuration is required for the Bulk Insert Task in SSIS to make the data load? BTW - the TableName.bcp file is bulk copy file as bcp widenative data type. The properties of the Bulk Insert Task are the following: DataFileType: DTSBulkInsert_DataFileType_WideNative RowTerminator: {CR}{LF}
Any help getting the bcp file to load would be appreciated. Let me know if you require any other information, thanks for all your help. Paul
I'm trying to use Bulk insert for the first time and getting the following error. I think it might have something to do with my Format File and from the error msg there's a conversion error for the first column. In my database the Field is nvarchar(6) so my best guess is to use SQLNChar for the first column. I've checked the end of each line is CR LF therefore the is correct for line 7 right?
Msg 4863, Level 16, State 1, Line 1 Bulk load data conversion error (truncation) for row 1, column 1 (ASXCode). Msg 7399, Level 16, State 1, Line 1 The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error. Msg 7330, Level 16, State 2, Line 1 Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
BULK INSERTtbl_ASX_Data_temp FROM 'M:DataASXImportTest.txt' WITH (FORMATFILE='M:DataASXSQLFormatImport.Fmt')
Before implementing memory based bulk copy insert with IRowsetFastLoad interface of SQL Server 2005 OLE DB provider, I want to know some considerations.
- performance : compared with T-SQL's "BULK INSERT ..." and bcp utility
- SQL Server's resource usage : when running memory based bulk copy, server resource's influence
- server side action(behavior) : when server is busy, delayed-update means IRowsetFastLoad::Commit(true) method can insert right after?
- row-count : The rowcount limitation can be inserted by IRowsetFastLoad::InsertRow() method before IRowsetFastLoad::Commit
I am trying to loop through & set execute permission on some UDFS but I cannot find an option for UDF's.
Private mobjSQL As SQLDMO.SQLServer Dim objDB As SQLDMO.Database
Private Sub GrantUDF()
Dim objDB As SQLDMO.Database Dim objUDFS As UserDefinedFunctions Dim objUDF As SQLDMO.UserDefinedFunction Dim lngUDFCount As Long Dim lngProg As Long
For Each objDB In mobjSQL.Databases If ListItemChecked(Me.lstDatabases, objDB.Name) Then lngUDFCount = objDB.???????????????????? lngProg = 0 For Each objUDF In objDB.?????????????????? GeneralProgress objUDF.Name, 0, lngUDFCount, lngProg objUDF.Grant SQLDMOPriv_Execute, "AGDB" lngProg = lngProg + 1 Next GeneralProgress "Finished", 0, lngUDFCount, lngProg End If Next
In this example ….. I have a sql user id called 'toronto' with the permissions it acquired by being added to the db_datareader (READ) & db_datawriter (ADD, CHANGE, DELETE) database roles in the 'getranet' database. However, the 'toronto' account is unable to execute or run any of the 240 stored procedures in the 'getranet' database with only these permissions, at least that's the results I'm getting.
Solution #1: If I add the toronto id to the db_dbowners role (PERFORM ANY ACTIVITY) in the 'getranet' database, the problem is resolved. I would rather not use this approach because with these permissions the id can delete the db, or tables etc… and I'm not the only one with the id and password.
Solution #2: I created a new database role (SP_EXECUTE) in the 'getranet' database, and granted the role 'execute' permissions to all 240 stored procedures in the database, added the 'toronto' id to the SP_EXECUTE role, the problem is resolved. This solution works fine but it will require more maintenance, anytime a stored procedure is added or modified I will have to remember to update the SP_EXECUTE database role in the getranet database. Hey, I will forget once in a while, apply thumb screws here.
So my question is …. Am I approaching this all wrong? Is there a 3rd, 4th or a better solution (White Elephant) that I just can't see? I just thought I would ask…..
I have created a stored procedure that executes when a service broker message is received, this sp then exec's sp_send_dbmail.
But i keep getting the error that execute permission is denied on sp_send_dbmail.
Fair enough but i have no idea who to grant the execute permissions to ? The sp is called by the endpoint service of the service broker queue, the sp is owned by dbo who is 'sa', i have tried altering the sp to execute as 'dbo' or as caller, but is still get the same error.
I have tried to exec sp_send_dbmail as 'sa' and it works.
I do not know under what user this sp executes when the service calls the sp, i also cannot get it to work with an execute as dbo statement even though dbo is 'sa' ?
Please help ?
Not sure if this should be posted under service broker becuase this post is more related to permissions ?
I have a web form with a text field that needs to take in as much as the user decides to type and insert it into an nvarchar(max) field in the database behind. I've tried using the new .write() method in my update statement, but it cuts off the text after a while. Is there a way to insert/update in SQL 2005 this without resorting to Bulk Insert? It bloats the transaction log and turning the logging off requires a call to sp_dboptions (or a straight-up ALTER DATABASE), which I'd like to avoid if I can.
Hi, I want to execute BCP in Query Analyser in SQL Server 2005 Express for that i surf on net and find that i should execute BCP under xp_cmdShell, That works good for addministritative account on SQL. But i want the working will be done by a non administrative account or non 'sa' user.How can i assign a non sa User permissions to execute xp_cmdShell? or just tell me any other alternative way to run BCP in Query Analyser or code behined. thanx
I have a group of users that I have given db_datareader permissions to in an SQL Server 2000 database. I am also creating web pages on an intranet site that pulls data from the table. If I just use a select statement to pull the data from the table, the users don’t have a problem. If I use a stored procedure with the exact same sql statement, the users get an error until I grant them execute permissions on the stored procedure.
I have heard that store procedures is the best way to handle data operations but having to make sure I assign execute permissions every time I create a stored procedures can be a pain. The only way I know of to make sure that they had permissions would be to make them a member of db_Owner which is definitely not an option.
Is this just the way it is, or is there some way to automatically grant them execute permissions on stored procedures that are nothing more than select statements and don’t violate db_datareader permissions?
I'm trying to use the SPROC below (courtesy of Erland!) to capture theerror message but it fails owing to insufficient permissions (I can'treproduce it just now, but I think it's because it can't get access tothe DBCC OUTPUTBUFFER).How do I give the SPROC permission to execute?Many thanksEdwardCREATE PROCEDURE stpShowErrorMessage @errmsg nvarchar(500) OUTPUT ASDECLARE @dbccrow nchar(77),@msglen int,@lenstr nchar(2),@sql nvarchar(2000),@s tinyint-- Catch the output buffer.CREATE TABLE #DBCCOUT (col1 nchar(77) NOT NULL)INSERT INTO #DBCCOUTEXEC ('DBCC OUTPUTBUFFER(@@spid)')-- Set up a cursor over the table. We skip the first-- row, because there is nothing of interest.DECLARE error_cursor CURSOR STATIC FORWARD_ONLY FORSELECT col1FROM #DBCCOUTWHERE left(col1, 8) <> replicate('0', 8)ORDER BY col1-- Init variable, and open cursor.SELECT @errmsg = ''OPEN error_cursorFETCH NEXT FROM error_cursor INTO @dbccrow-- On this first row we find the length.SELECT @lenstr = substring(@dbccrow, 15, 2)-- Convert hexstring to intSELECT @sql = 'SELECT @int = convert(int, 0x00' + @lenstr + ')'EXEC sp_executesql @sql, N'@int int OUTPUT', @msglen OUTPUT-- @s is where the text part of the buffer starts.SELECT @s = 62-- Now assemble rest of string.WHILE @@FETCH_STATUS = 0 AND datalength(@errmsg) - 1 < 2 * @msglenBEGINSELECT @errmsg = @errmsg + substring(@dbccrow, @s + 1, 1) +substring(@dbccrow, @s + 3, 1) +substring(@dbccrow, @s + 5, 1) +substring(@dbccrow, @s + 7, 1) +substring(@dbccrow, @s + 9, 1) +substring(@dbccrow, @s + 11, 1) +substring(@dbccrow, @s + 13, 1) +substring(@dbccrow, @s + 15, 1)FETCH NEXT FROM error_cursor INTO @dbccrowENDCLOSE error_cursorDEALLOCATE error_cursor-- Now chop first character which is the length, and cut after end.SELECT @errmsg = substring(@errmsg, 2, @msglen)GO
Ive created a DAL called Artist.xsd. Ive used stored procedures to access the data. The wizard created a stored procedure called 'dbo.ArtistSelectCommand' Ive granted the ASPNET account execute permissions on this stored procedure When I run the application and try to execute the stored proc, I get this error EXECUTE permission denied on object 'ArtistSelectCommand', database 'EBSNet', owner 'dbo'.
as far as im aware ive givne the ASPNET account the correct permissions
In our development and test environments the developers need to create and execute stored procedures as dbo without having any other dbo permissions. If I place them in db_owner, they have too many permissions. Is there a way to address this situation?
I'm also curious how other companies address the subject of creating stored procedures in development and test environments. If I give developers create and execute permission in a database, all objects would be created as JohnDoe.storedprocedurename instead of dbo.storedprocedurename. Any help in this area is appreciated.
Hey guys,I'm pretty new to SQL configuration, and I need to give EXECUTEpersmissions for one of the SQL user roles. I am running SQL 2005Management Studio Express - free version. I found the list of mystored procedures, but I can not locate any permissions screen. Cansomeone help point me in the right direction? Thanks!
I have a database which contains a stored procedure. The stored procedure contains an update script to a different database. The user group have access to the database that stores the stored procedure but do not have update rights to the database that contains the data that is being updated.
Therefore, every time the user group executes the stored procedure it fails because the security permissions do not propagate to the next database.
Is there anything I can do to get around this without grant dbo permissions to the whole user group.
I have stored procedures. I have heard that it is a best practice to use stored procedures to encapsulate some SQL statements and then grant permissions to execute the stored procedure. But when I try this and use EXECUTE AS to test it out, the user in question gets errors about not having access to some of the underlying objects.
How does this best practice work? If I need to grant the user permissions to the underlying objects anyway, I am not sure why a stored procedure is considered best practice in this regard.
