Bulk Insert From Netware Problems After Applying SP4
Jul 23, 2005
I'm running MSSQL 2K on Win 2k and just upgraded SQL Server from SP3
to SP4 (that's when my problem started). I have a procedure that bulk
inserts from a text file that is located on a Netware 4.11 file server.
The procedure actually references the file using the UNC path to a
share on a NT 4 server that is connected to the novel server using
gateway services for NetWare. Now when it tries to reference the file I
get:
Server: Msg 4861, Level 16, State 1, Line 1
Could not bulk insert because file '\NtServerNetware Sharefile.txt'
could not be opened. Operating system error code 5(Access is denied.).
I've tried running the process as a domain administrator and get the
same results.
I can run these commands and they work as expected
master..xp_cmdshell 'dir \NtServerNetware Sharefile.txt'
master..xp_cmdshell 'type \ NtServerNetware Sharefile.txt'
Also if I Bulk insert the file from the local drive of the same NT
server it works fine i.e.:
BULK INSERT #imp FROM \NtServerd$file.txt'
Any thoughts would be appreciated.
View 1 Replies
ADVERTISEMENT
Apr 18, 2008
Hello,
I'm just learning SSIS and I've hit my first bump. I am doing a bulk import from a tab delimited text file to an empty sql table that has a Idendity column defined. How do I tell the bulk insert task to skip that column when inserting from the text file. If I remove the identity column it imports the data fine, but I want to create the indentity column in the table too.
Thanks.
View 8 Replies
View Related
May 12, 2015
We have a filtered publisher (SQL Server 2012) with several pull and push subscriptions that have been functioning fine for years.
We have just added a new pull subscriber from a remote server. We configured an alternate folder location on the subscriber (pointing to existing path on a remote server). We generated new snapshot and partitioned snapshot, and moved to subscribing server at alternate path.We're seeing a problem we've never seen before:
When the merge agent runs, it applies the schema and performs a few hundred bulk inserts, but then proceeds to 'download changes to subscriber' as though the snapshot is old (it is brand new and should have all transactions). We have never seen this before, i.e. all data is usually applied in bulk when creating a new or reinitializing an existing subscriber.
we marked the subscriber for re-initialization (from both the publishing and subscribing server) with a fresh set of snapshots. The same problem occurred.We have also tried in our test environment (which mirrors production) and the snapshot applies as expected (via bulk inserts).
(It might be relevant to note the publisher was recently upgraded in-place from 2005 to 2012.)
View 11 Replies
View Related
Nov 2, 2007
Does anyone know how to do a bulk insert using just the script task? I've been searching everyehere but can't seem to find a sample.
View 6 Replies
View Related
Jan 17, 2008
Im having some issues with bulk insert.
This is the table:
CREATE TABLE [dbo].[tmp_GA_status](
[GA_recno] [int] NOT NULL,
[GA_desc] [varchar](40) NULL
)
This is the file (unicode):
1|"test1"
2|"test2"
3|"test3"
4|"test4"
5|"test5"
6|"test6"
7|"test7"
8|"test8"
and this is the sql:
bulk insert tmp_GA_status from 'C: empTextDumpGA_status.dta'
with (CODEPAGE='RAW', FIELDTERMINATOR='|', ROWTERMINATOR='
', DATAFILETYPE='widechar')
so yeah, pretty simple. But whatever I do I get this;
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 2 (GA_desc).
So what am I doing wrong ?
View 13 Replies
View Related
Sep 27, 2007
I have to update a field within a table of 60 records or so. Each record has a different field value. it's type varchar. i was given an excel file with the field values and was thinking of a bulk update like bulk insert, but i don't recall that it's possible that way.
Is the only way to create a table, bulk insert, then merge the two tables together with UPDATE?
Just wanted to see if there was an easier way to do it, otherwise i'll take the latter route. Thanks!
View 1 Replies
View Related
Oct 11, 2000
I have a table containing 8 million records.
I need to replace 2 million of these records with
a scaled down query that goes something like:
SELECT 1, ShareholderID, Assets1
FROM MyTable (Yields appx. 200,000 recods)
SELECT 2, ShareholderID, Assets2
FROM MyTable (Yields appx. 200,000 recods)
.
.
.
SELECT 10, ShareholderID, Assets1 + Assest2 + Assets3 + ... + Assets9
FROM MyTable (Yields appx. 200,000 recods)
Updates and cursors just seem to be too slow.
So far I have done the following, but was wondering if anyone could think of a better way.
SELECT 6 million records that don't need to be deleted into a #TempTable
Use statements above to select into same #TempTable
DROP and recreate Original Table
SELECT 6 + 2 million records INTO original table.
This seems rather convoluted. Is there a better approach? Would it be worth while to dump data to a file and use bcp / Bulk Insert
Any comments are appreciated,
-Marc
View 3 Replies
View Related
Apr 8, 2008
I receive the following error message when I try to use the Bulk Insert Task to load BCP data into a table:
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 4. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (overflow) for row 1, column 1 (rowno).".
Task failed: Bulk Insert Task
In SSMS I am able to issue the following command and the data loads into a TableName table with no error messages:
BULK INSERT TableName
FROM 'C:DataDbTableName.bcp'
WITH (DATAFILETYPE='widenative');
What configuration is required for the Bulk Insert Task in SSIS to make the data load? BTW - the TableName.bcp file is bulk copy file as bcp widenative data type. The properties of the Bulk Insert Task are the following:
DataFileType: DTSBulkInsert_DataFileType_WideNative
RowTerminator: {CR}{LF}
Any help getting the bcp file to load would be appreciated. Let me know if you require any other information, thanks for all your help.
Paul
View 1 Replies
View Related
Jun 29, 2015
I'm trying to use Bulk insert for the first time and getting the following error. I think it might have something to do with my Format File and from the error msg there's a conversion error for the first column. In my database the Field is nvarchar(6) so my best guess is to use SQLNChar for the first column. I've checked the end of each line is CR LF therefore the is correct for line 7 right?
Msg 4863, Level 16, State 1, Line 1
Bulk load data conversion error (truncation) for row 1, column 1 (ASXCode).
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
BULK
INSERTtbl_ASX_Data_temp
FROM
'M:DataASXImportTest.txt'
WITH
(FORMATFILE='M:DataASXSQLFormatImport.Fmt')
[code]...
View 5 Replies
View Related
Feb 1, 2007
Hi~,
Before implementing memory based bulk copy insert with IRowsetFastLoad interface of SQL Server 2005 OLE DB provider, I want to know some considerations.
- performance : compared with T-SQL's "BULK INSERT ..." and bcp utility
- SQL Server's resource usage : when running memory based bulk copy, server resource's influence
- server side action(behavior) : when server is busy, delayed-update means IRowsetFastLoad::Commit(true) method can insert right after?
- row-count : The rowcount limitation can be inserted by IRowsetFastLoad::InsertRow() method before IRowsetFastLoad::Commit
- any other guide lines
View 1 Replies
View Related
Nov 14, 2007
I have a web form with a text field that needs to take in as much as the user decides to type and insert it into an nvarchar(max) field in the database behind. I've tried using the new .write() method in my update statement, but it cuts off the text after a while. Is there a way to insert/update in SQL 2005 this without resorting to Bulk Insert? It bloats the transaction log and turning the logging off requires a call to sp_dboptions (or a straight-up ALTER DATABASE), which I'd like to avoid if I can.
View 6 Replies
View Related
Oct 12, 2007
Hi,
i have a file which consists data as below,
3
123||
456||
789||
Iam reading file using bulk insert and iam inserting these phone numbers into table having one column as below.
BULK INSERT TABLE_NAME FROM 'FILE_PATH'
WITH (KEEPNULLS,FIRSTROW=2,ROWTERMINATOR = '||')
but i want to insert the data into table having two columns. if iam trying to insert the data into table having two columns its not inserting.
can anyone help me how to do this?
Thanks,
-Badri
View 5 Replies
View Related
Mar 13, 2001
As the result of a take-over, the company I work for is having to replace part of its IT infrastructure. One of the changes we are being asked to make is to replace our clients NT4 Workstation and TCP/IP setup with Lotus Notes and Novell Netware. The clients will still need to access one of our key applications which is backended by a large SQL Server 7.0 system. I have been asked if this change is likely to be a problem. I am not very familiar with Netware and have done some research and found numerous references telling me that it can be done but very little on actually how to do it. I am particularly concerned about the security aspect as we use NT Security and database roles to control access to the databases. How would this work if the clients are logging on to a Novell network rather than a Microsoft one?
Can somebody point me in the right direction please.
View 3 Replies
View Related
Apr 18, 2001
Hi,
Anyone ever try to access a NetWare drive from within SQL Server. I have setup a netware account that matches the NT account that the SQL service runs under and given this account the necessry access to the drive. When I do a xp_cmdshell 'dir h:' (h: being the netware drive) I get an 'Access is denied' error.
Any help much appreciated.
Regards,
Donal
View 1 Replies
View Related
Mar 17, 2008
I was wondering if anyone could help me with this. I am currently working on a project for reporting on a new acquisition the company have made. Unfortunately, the people I have to give access to the SQL Server are using Netware for authentication.
Is there any way to allow these people to log into SQL Server without having to create a SQL authenticated user for each of them?
Thanks
View 7 Replies
View Related
Jun 14, 2007
I am running SQL Server 2005 Reporting Services. I created a subscription delivered by "Report Server File Share" and the UNC path points to a share on a Netware server. I get the following error when the schedule runs:
Failure writing file Completed.pdf : The network path was not found
The UNC path is \rmh5vol1deptimsoperhiscommon.
I can create the same subscription, but have it write to a Windows file share and everything works fine.
Does SQL Server 2005 Reporting Services support writing to a Netware share?
View 3 Replies
View Related
Nov 25, 2006
In case of a bulk insert, the “FOR INSERT� trigger fires for each recod or only once?
Thanks,
View 1 Replies
View Related
Apr 26, 2006
Hello,
I am wondering is the Transaction Log logged differently between BULK INSERT vs INSERT? Performance speaking, which operations is generally faster given the same amout of data inserted.
Sincerely,
-Lawrence
View 3 Replies
View Related
Feb 15, 2007
Hi~, I have 3 questions about memory based bulk copy.
1. What is the limitation count of IRowsetFastLoad::InsertRow() method before IRowsetFastLoad::Commit(true)?
For example, how much insert row at below sample?(the max value of nCount)
for(i=0 ; i<nCount ; i++)
{
pIFastLoad->InsertRow(hAccessor, (void*)(&BulkData));
}
2. In above code sample, isn't there method of inserting prepared array at once directly(BulkData array, not for loop)
3. In OLE DB memory based bulk copy, what is the equivalent of below's T-SQL bulk copy option ?
BULK INSERT database_name.schema_name.table_name FROM 'data_file' WITH (ROWS_PER_BATCH = rows_per_batch, TABLOCK);
-------------------------------------------------------
My solution is like this. Is it correct?
// CoCreateInstance(...);
// Data source
// Create session
m_TableID.uName.pwszName = m_wszTableName;
m_TableID.eKind = DBKIND_NAME;
DBPROP rgProps[1];
DBPROPSET PropSet[1];
rgProps[0].dwOptions = DBPROPOPTIONS_REQUIRED;
rgProps[0].colid = DB_NULLID;
rgProps[0].vValue.vt = VT_BSTR;
rgProps[0].dwPropertyID = SSPROP_FASTLOADOPTIONS;
rgProps[0].vValue.bstrVal = L"ROWS_PER_BATCH = 10000,TABLOCK";
PropSet[0].rgProperties = rgProps;
PropSet[0].cProperties = 1;
PropSet[0].guidPropertySet = DBPROPSET_SQLSERVERROWSET;
if(m_pIOpenRowset)
{
if(FAILED(m_pIOpenRowset->OpenRowset(NULL,&m_TableID,NULL,IID_IRowsetFastLoad,1,PropSet,(LPUNKNOWN*)&m_pIRowsetFastLoad)))
{
return FALSE;
}
}
else
{
return FALSE;
}
View 6 Replies
View Related
May 15, 2008
I have two SSIS packages that import from the same flat file into the same SQL 2005 table. I have one flat file connection (to a comma delimited file) and one OLE DB connection (to a SQL 2005 Database). Both packages use these same two Connection Managers. The SQL table allows NULL values for all fields. The flat file has "empty values" (i.e., ,"", ) for certain columns.
The first package uses the Data Flow Task with the "Keep nulls" property of the OLE DB Destination Editor unchecked. The columns in the source and destination are identically named thus the mapping is automatically assigned and is mapped based on ordinal position (which is equivalent to the mapping using Bulk Insert). When this task is executed no null values are inserted into the SQL table for the "empty values" from the flat file. Empty string values are inserted instead of NULL.
The second package uses the Bulk Insert Task with the "KeepNulls" property for the task (shown in the Properties pane when the task in selected in the Control Flow window) set to "False". When the task is executed NULL values are inserted into the SQL table for the "empty values" from the flat file.
So using the Data Flow Task " " (i.e., blank) is inserted. Using the Bulk Insert Task NULL is inserted (i.e., nothing is inserted, the field is skipped, the value for the record is omitted).
I want to have the exact same behavior on my data in the Bulk Insert Task as I do with the Data Flow Task.
Using the Bulk Insert Task, what must I do to have the Empty String values inserted into the SQL table where there is an "empty value" in the flat file? Why & how does this occur automatically in the Data Flow Task?
From a SQL Profile Trace comparison of the two methods I do not see where the syntax of the insert command nor the statements for the preceeding captured steps has dictated this change in the behavior of the inserted "" value for the recordset. Please help me understand what is going on here and how to accomplish this using the Bulk Insert Task.
View 2 Replies
View Related
Oct 27, 2006
hi friends i am trying for bulk insert using SQL server 2000using this codebulk insert xyzfrom 'D:authors.txt'WITH (FIELDTERMINATOR = ',') but it gve me error saying thatCould not bulk insert because file 'D:authors.txt' could not be opened. Operating system error code 21(error not found). i check file securityit has given full control to the file can any one give me idea about Operating System error code 21(error not found) thanks
View 1 Replies
View Related
Aug 28, 2007
Hi,I've a SP that insert records in one table and then call another insert SP on a second table. The first table is like a master table and the second is like a child table. After inserting the right record in the master table, I've to insert some record in the child table. This records differ each other only by two of about ten field, so what I'd want is not to call the second SP X times, but only one time.. Is it possible??ExampleTable1: Id (identity), Desc;Table2: Id (identity), Id_table1, Id_TableX, Num, Field1, Field2, ... Field10.In Table2 only Id_TableX and Num change every time... the other are all the same (for one record in Table1). How can I do? Probably with a bulk insert and a bulk update?? But, can I make a bulk xxx without a file??
View 3 Replies
View Related
Dec 28, 2007
hi friends i am using bulk insert cmd using my table name but i am facing error.....SO
IS IT POSSIBLE TO USE BULK INSERT WITH TEMPRARY TABLE VARIABLE
PLZ HELP ME
View 2 Replies
View Related
Dec 20, 2000
How can I do a bulk insert without the transaction being logged?
View 1 Replies
View Related
Sep 15, 2000
Hi,
I want to move data from a text file to a SQL table. After DTS creates the table, does it use Bulk Insert to copy the data from the file to the table, or BCP?
Thanks,
Judith
View 2 Replies
View Related
May 19, 2000
I am trying to do a bulk insert from a data file into a linked access database. When I run the query I get the error message:
'Server: Msg 4801, Level 16, State 81, Line 1
Bulk_main: The opentable system function on BULK INSERT table failed.
Not sure what the problem is because BOL just says to check Microsoft.com for updated error message information. However, when I went to the site there was no updated information. Has anyone else seen this error? If so, have you figured out the problem? Any help would be greatly appreciated. Thanks.
Jim
View 1 Replies
View Related
Sep 12, 2000
Hi,
Which is a faster method -- bulk insert or BCP
And I assume DTS has no problem handling either one? The input files are between 400 meg and 1 gig.
Thanks,
Judith
View 3 Replies
View Related
Dec 5, 2000
How does one perform a bulk insert?
View 1 Replies
View Related
Dec 28, 1999
We've been using Bulk Insert to load our tables. But, recently we encountered this error message "There is insufficient system memory to run this query. [SQLSTATE 42000] (Error 701). The step failed."
Then, our DBA suggested that we use BCP. It seems to work fine until the file size exceeds 30MB. This is the message I get "Starting copy... 0 rows copied. Network packet size (bytes): 4096 Clock Time (ms.): total 14984. Process Exit Code 0. The step succeeded." Is this a known problem?
Then, we decided to use DTS. DTS seems to be able to handle any file size but it's a slower process than the other 2. Any suggestions?
View 1 Replies
View Related
Mar 14, 2000
Can anyone help me on how to do a bulk insert from a text file into sql server , some facility similar to
sql loader of oracle .. thank you in advance
View 1 Replies
View Related
Jun 13, 2000
howdy:
I keep getting the following error msg:
<<Bulk insert data conversion error (truncation) for row 17, column 6 (col6).>>
I created a test file of 100 rows in EXCEL and saved as tab-delimited and then I run the following from the query analyzer:
bulk insert ssdi..dmf FROM 'C:devpb6ccsssdiest.txt'
WITH
(DATAFILETYPE='char',
FIELDTERMINATOR='',
ROWTERMINATOR='',
KEEPNULLS,
MAXERRORS=10,
TABLOCK)
here's my table:
create table dmf
( col1 char(9) not null,
col2 char(12) null ,
col3 char(10) null ,
col4 char(8) null ,
col5 char(8) null ,
col6 char(12) null ,
col7 char(12) null ,
constraint pk_dmf primary key (ssn))
note:
I don't always have values in the last 2 columns
I installed SP2.
TIA
deanna
View 1 Replies
View Related
Jan 19, 2004
I often encountered to insert multiple records into a certain table, such as:
DESCRIPTION AMOUNT
SALARY 8000
ALLOWANCE 100
CASH GIFT 400
FOOD ALLOWANCE 460
SCENARIO:
I want to insert at one time the example written above into TBLcompensation table with the following fields,
ID(identity,1), DESCRIPTION ,AMOUNT
QUESTION:
Is there other ways to INSERT multiple records at one time?
MY SOLUTION:
I collected all records and concatenated it as one string with a special character separating between fields and rows. Then i do the looping on the STORE PROCEDURE. I believe this is not an effecient way.
View 1 Replies
View Related
