ByPassPrepare In SSIS Property Value Not Changing
May 1, 2006Everytime when I set this value to true; it saves but when I close the package and reopen it. It returns to false, I am using OLE DB connection... Help Please
View 1 Replies
ADVERTISEMENT
Changing SSIS Property Defaults
Sep 5, 2006To make certain SSIS features work there are many properties that need to be set over and over for most containers in the package. For example with CheckpointRestart, you need to set (in most cases) all of the tasks' FailPackageOnFailure to True. If you miss one, the package may not restart properly and you might never know. There are other situations where as a development team we want certain properties to be usually set the same but differently from the SSIS default.
Is there a way to control the defaults that the SSIS IDE uses?
I remember back in classic VB that if you wanted to change the defaults of a bare form you could create a template form adjusted the way you like and put it in a templates folder. Then new forms added to a project would be based on the template form.
Changing Code Page Property Using Property Expression Doesn't Work
Jun 16, 2006I am having problems exporting data into a flat file using specific code page. My application has a variable "User::CodePage" that stores code page value (936, 950, 1252, etc) based on the data source. This variable is assigned to the CodePage property of desitnation file connection using Property expression.
But, when I execute the package, the CodePage property of the Destination file connection defaults to the initial value that was set for "User:CodePage" variable in design mode. I checked the value within the variable during runtime and it changes correctly for each data source. But, the property of the destinatin file connection doesn't change and results in an error.
[Flat File Destination [473]] Error: Data conversion failed. The data conversion for column "Column01" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
[DTS.Pipeline] Error: The ProcessInput method on component "Flat File Destination" (473) failed with error code 0xC02020A0. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
If I manually update the variable with correct code page and re-run the ETL, everything works fine. Just that it doesn't work during run-time mode.
Can someone please help me resolve this.
Thanks much.
Changing The ConnectionString Property For A File Connection Manager
Mar 14, 2006I have a package that I plan to run against about 700 databases to look for anomalies. I have several package variables in place that are passed in at runtime. One of them will hold the path and filename of the error log for the current database in process. I want each database to generate it's own error log for documentation and research purposes. However, when I run the package, it continues to use the path and filename that I entered when I created the File Connection Manager. I am trying to update that value in a Script Task by using the ConnectionManager class and setting the value for the "ConnectionString" property. This method is working for the OLEDB Connection Manager (which tells the package which Access database to process), but not for my File Connection Manager. Please help!
DO
Changing Header Rows To Skip Property In Flat File Connection During Runtime
Dec 21, 2006Hi all
I have a flat file.I am trying to set the value for the property "HeaderRowsToSkip" during runtime.I have set an expression for this in my "flat file connection manager". But this is not working.The connection manager is not able to take the value during runtime.
My expression is as follows:
DataRowsToSkip : @[user:: Var]
where "Var" is my variable which gets the value from the rowcount component and trying to set it back to the "HeaderRowsToskip" property.
I ve even tried setting the value to the "HeaderRowsToSkip" property in the expression builder.
Its not working....
Can anyone help me out in solving this????
Thanks in advance
Regards
Suganya
Changing Flat File Connection File Name Property
Sep 14, 2006Hi,
I have a task to traverse a folder of CSV files of same format and then populate into one sql server table.
Is there a way where I can change the source CSV file name runtime using FOR EACH loop container for flat file connection manager ?
any help would be much appriciated.
Thanks,
Furrukh Baig
Changing Field Property To Not Require From Require?
Nov 6, 1998Hi everyone,
I have a table which have several fields. I have a field that is made required by mistake. I would like to change this field to not require. Can someone help with the syntax?
Any help is greatly appreciate.
Scanning Many SSIS Packages For A Particular Property?
Jan 14, 2015I have a pile of around 50 packages (*.dtsx files) or so, and we have found that not all of these packages are set to have the critical bits fail the package on failure of the critical bits. This gets to be slightly annoying when there is a job of some 20 or 30 packages running, and one of these fails and the rest of the job runs along as if nothing (bad) happened. This leads to having to hunt down what failed, diagnosing why it failed, and then re-running the parts that failed in different and inventive ways after the unhandled exception.
So far, I have broken open a couple of the offending SSIS packages in notepad, and the string "FailPackageOnFailure" appears in a number of places. Unfortunately, due to the fact that some of the packages have Sequence Containers that hold some of the SQLTasks (all of the "critical bits" are SQL Tasks, I believe), and this changes the XML path to the parts that I want to scan. This leaves me with the prospect of opening each package, wait for the package to be validated, going to the SQL Task in the package, right clicking for the properties of said SQL Task, and finding the Fail Package on Failure bit (OK, more likely I will delegate that task to some poor schmuck, but I promise I will feel some regret over it).
Is Task.WaitForMe Property Ignored By SSIS Runtime?
Mar 24, 2007Can the WaitForMe Task property be used for building eventing based tasks (that is, "tasks with no defined execution lifecycle"), as Haselden's IS book terms it?
The SSIS run-time would appear to never interrogate this property.
I tried setting a breakpoint in a custom task on the WaitForMe
property. The breakpoint was never hit at run-time. Design-time only. It seems that the run-time ignores this property.
The documentation states that "On completion of any task, the runtime examines tasks that are still running in
the container, and if any of these tasks have WaitForMe set to
false, those tasks will be canceled." Well, the tasks with WaitForMe set to false are in fact not cancelled (e.g. System::CancelEvent is not signalled).
The intention of the WaitForMe Task property is to allow for event based tasks to not prevent a package (or other container) from finishing if the event never happens.
Tasks like the WMI Event Watcher, Message QueueTask set to receive, and third party tasks like file watchers, or service broker queue receivers would seem to fall in this category.
SQL 2012 :: Set SSIS EvaluateAsExpression Property Of Variable To TRUE?
Jul 23, 2015Where do you set an SSIS EvaluateAsExpression property of the variable to TRUE?
[URL]
SSIS Lookup Task - Best Practice Concerning Cachetype Property
Oct 26, 2006SSIS data flow transformation - Lookup task - best practice concerning Cachetype
I would like to know if there's any best practice concerning the CacheType property for the the Lookup task. Default value is "Full", but if the SSIS package is working with at lot of data, i.e. +10 mill. records from the OLE DB source to be handled through a variated numbers of data flow transformation tasks, it must have an impact memory usage if the lookup table also is a large table, i.e. +8 mill. records? When should I consider turning the property value to "none"
Howto Change The Value Of The ProtectionLevel Property Of A SSIS Package?
May 29, 2007I see various references to the options for a package's protection level (including http://msdn2.microsoft.com/en-us/library/ms141747.aspx) but I can't seem to find anything telling me how to actually look at and/or change the protection level of a package - thus my question is "How do I change the protection level of an SSIS package?"
Thanks!
- Lance
Integration Services :: Setting Delay Validation Property To True In SSIS?
May 19, 2015I have a main package calling another package through the Execute Package task.
The main package is passing the Job Instance id as a parameter to the other package.
When i execute the Execute Package task the concerned package is not showing any execution progress.However when i set the Delay validation Property to True , I saw that the package executed instantly and the desired result was obtained.
I am not sure how the Delay Validation property worked for the cause , as in my package I had no scenario of a temp table being called or any other temporary variables being used which needed a Delay Validation.
Integration Services :: SSIS - Connection Manager Property Not Set From Project Parameter
Oct 2, 2015I am working with SQL Server 2012. I have deployed a SSIS project that has 2 packages in it. The package connection manager (Test) uses an expression to evaluate one of the Project parameter value (TestConnectionString) to set its ConnectionString property.
This works fine in a Dev environment. However when deployed to UAT, it keeps failing with the error:
PackageExport:Error: The result of the expression
"@[$Project::TestConnectionString]" on property
"Package.Connections[Test].Properties
[ConnectionString]" cannot be written to the property. The expression was evaluated, but cannot be set on the
property.
I can not seem to find what the issue could be. I have come across [URL] .... where it says: "If the package contains project parameters, the package execution may fail." but offers no solution.
Value Of A Readonly Property Of Custom Task Is Not Updated In Property Window
Apr 17, 2008Hi,
I developed a simple custom control flow component which has several read/write properties and one readonly property (lets call it ROP) whichs Get method simple returns the value of a private variable (VAR as string). In the Execute method the VAR has a value assigened. When I put the value of ROP or VAR into MsgBox I can see the correct value. However when I execute the component I can not see the value of the ROP in the property window. I see the property but its value is empty string. For example when I put a breakpoint to postexecute or check the property before click OK in a MsgBox I would expect that the property value would be updated in SSIS as well. Is there a way how to display correct values of custom tasks properties in property window?
Thanks for any hints.
Integration Services :: Create SSIS Package Checkpoint-file Property With UNC Path
Aug 26, 2015I can set the propperty of the checkpoint file to a local drive, but not to a UNC path mapping, mapping to my host server. (loop back)
Example: "I:FILEFILE1$InputArchiveOntwikkel " is possible as checkpoint file property.
S11487O$InputArchiveOntwikkel is not possible, though this is the same folder on the local host.
For data source both unc path and drive mapping are allowed. Why this difference?
Using A Variable In An Expression To Populate The Executable Property Of An Execute Process Task In SSIS
Jan 22, 2008Hello,
I am having a hard time setting the executable path for an Execute Process Task in SSIS. I have a variable that is initialized at package statup which holds the path to an executable in Windows. When I set the property "Executable" Path in an expression, I get a warning that the path for the executable is not set. One workaround was to try and initialize the variable with a bogus path with the hopes that the "correct" value will be written on run-time. NO LUCK. I still get the error and I cannot run the package until I put a static path.
Does anyone have a clue as to what is going on??
Mike
(URGENT) Cannot Be Written To The Property. The Expression Was Evaluated, But Cannot Be Set On The Property
May 7, 2008Untill recently I had a smooth running SSIS package,but suddenly it throws error syaing
"OnError,,,,,,,The result of the expression
"@[User:trTextFileImpDirectory] +"SomeTextStringHere"+ @[User:trANTTextFileName] +(DT_STR,30,1252) @[User:taging_Date_Key]+ "SomeTextStringHere"
" on property "ConnectionString" cannot be written to the property. The expression was evaluated, but cannot be set on the property."
I have child SSIS package running under a parent package (through execute package task)
I have few flat file connection managers in child package for text file import , in which I am building text file path dynamically at run time by assigning an expression in connection string property of connection manager.
The Expression is as follows
"@[User:trTextFileImpDirectory] +"SomeTextStringHere."+ @[User:trANTTextFileName] +(DT_STR,30,1252) @[User:taging_Date_Key]+ +"SomeTextStringHere"
Where @[User:trTextFileImpDirectory] is a variable which contains path of directory containg text
files.Value in this variable is assigned at runtime from parent package's variable,which in turns fetch
value from a configuration file on local server.
With my current configuration this path has been configured to some other server's directory over network ( I.e my package picks text files from some other servers folder over network)
While
"Some string here"+ @[User:trANTTextFileName]" part of file name string.
(DT_STR,30,1252) @[User:taging_Date_Key] Contain the date of processing ,value in this variable is also picked up at run time from parent package variable.
1) So can someone give me some insight into possible reason of failures.
2) Is it possible that problem arises if directory (from which I m picking text files) is assigned password or is there exist some problem in accessing forlders over network ?
3) Or there can be some problem in package configuration at design time( I.e where I m assigning value in variable from parent package vriables)?
Reg:- Assign File Properties To SSIS Varibales(Custom Task) In Property Grid Progrmatically.
Jul 6, 2007HI,
I need to open a File through File connection manager and want to assign these file properties to SSIS precreated varibale or Newly created varibale. I want to show file properties in Propertygrid. Properties grid will conatin File Propeties Column and SSIS varibale Combobox column. The combo box will contain New variable field. When user select New Variable field, then a new SSIS varibale window will open and we can able create New variable and that Newly created variable should add to that property comboBox.
For Instance if we create a new varibale Name "Creationdate" by clicking on New Varible in ComboBox, then that CreationDate variable should add to Property ComboBox in PropertyGrid. After adding when we select that variable Name "Creationdate" then that selected file Creation date should assign to SSIS varibale "Creationdate" field.
Any Comments or sample will help me.
Nitin
SSIS Variables Not Changing Value?!
Jun 6, 2006Greetings my SQL friends,
I have a very simple package which consists of a SQL Task component and a Script Task.
The SQL Task retrieves a single value from 1 row table in one of my database and assigns that value to a variable. The Script task simply outputs the value of the variable in to a message box. I know, it's all simple stuff (I am trying to master SSIS )
The problem I have is that when I change the value of the column in my table, the value of the variable is not changing when I re-run my package. It seems to be the same value every time.
What am I doing wrong?!
Your help would be much appreciated.
Changing Dynamically The Destination Name In Ssis
Apr 15, 2008i am transfering the table from one database to csv file format..i did it.. again i want to shift that csv files to another databse as tables. how to do this task.. pls help me.. its very urgent..out TL had given me the dead line.. send reply soon....
View 5 Replies View RelatedChanging SSIS Production Code
Jan 14, 2008
I am curious to find out by other people on how they manage incremental code changes to SSIS packages. I am in a situation now where we deliver production SSIS packages to a client, where the client changes the connection details to the data sources and exectues the packages on a nightly basis.
We have had instances where clients are asking for enhancements and modifications to the SSIS package whereby we would develop it in our development environment then replace the existing copy in the clients production environment. There has been instances whereby the packages would work as desired on our end, but it requires further refinement on the clients side. As such, we have had instances where we had to "back-out" into the previous packages.
I am just trying to find out what methods or procedures other people are following to acknowledge situations like this or similar to this. Currently we are following an exhaustive method of having two copies of the code on the client side, the "live" code is never modified, just the secondary copy, then when all is good, we move this code into the "live" code. Does anyone have any means of performing incremental updates on SSIS packages easily?
Changing A SSIS Package Before Each Execute
Feb 7, 2008
I'm new to SSIS so I have not found the answer yet. I have a SSIS package that needs to be run everyday,that loads a basic text file. The only problem is that the text file may not be in the same location everyday so my users will need to locate the path prior to running the package. Is there a way to browse to the text file then have my users execute the package sort of like the old DTS in SQL 2000.
Shanon
SSIS: Changing URL In HTTPConnectionManager Not Working?
Dec 3, 2007I've been building a prototype using Webservices (coded in .NET) and SSIS to move data from our order/fulfillment system to our accounting system. I have struggled a bit with SSIS's WebService Tasks; but, finally have a package that runs locally that calls a web service and loads the data into SQL Server. I tried to move this to our server, I modify the HTTPConnection Parameter to the Product WS URL and the web service task fails with an "Unable to Connect to Server" error.
So, I decided to try running the production WS in my local (development) SSIS. I change the HTTP Connection URL, save, rebuild and run. The job runs successfully - against my LOCAL Web Service. It did not recognize the change or is somehow cached.
How do I get it to run against my Production Web Service???
Thanks.
Jennifer
Changing SSIS Package - New User Question
Feb 23, 2006I saved a simple export/import package from the import/export wizard to a .dtsx file/package. Now I want to change the package to delete/truncate all of the tables before adding data. (since this has 80 tables it would have been a pain to edit each of them individually)
How can I easily go about doing this with the SSIS package. I can't find out where this would actually be executed.
Also, how can I actually view the code behind the SSIS package.
Thanks.
Changing Connection String In SSIS Package ???
Feb 5, 2007Hi!
I create a SSIS Package for ETL on my own machine. During development database was also on my machine. For access to this database an OLE DB connection was defined within a package in BI Development Studio. Everything worked well both in debug mode and testing package itself.
Finally I need to load data to a database on a different machine using this package.
I used several scenaries:
1) simply copied the package-file to estination machine, open it for execution, in section "Connection Managers" I edited connection string manually - changed server name and Initial Catalog. And try to execute.
2) on the destination machine I manually created an OLE DB connection (using Microsoft Data Link) to a different database (test succeded), Changed the extention of the connection file 'udl' for ' txt ' and copied its connection string to the field connection string in section "Connection Managers" (pointed in variant 1) ).
3) use Package Configurations, copied the deployment to destination machine, installed the package the way like written here - http://msdn2.microsoft.com/en-us/library/ms365338.aspx. Changed exported properties - Server name, Initial Catalog and also the whole Connection String. Also try to execute.
In all cases I recieved the same error execution message :
"Errors in the metadata manager. Either the database with ID of " OLD_DATABASE_NAME " does not exist in the server with ID of " NEW_SERVER_NAME " or the user does not have permissions to access the object."
As for access (username/pass) settings they are the same for both of them, I have the same administrative rights on both machines. And more with the same rights the ole db connection made was made manually in variant 2 - succeded!!! So I don't think the problem is here.
As for Error message - I think somewhere the OLD name of database (Initial Catalog) is saved, though I tried to change it. Though the NEW value for the server name is substituted.
Please, help me. I don't know what else can I try. And it is not a single case for my practice. So I think - something wrong in my actions.
Changing/Setting Windows User For SSIS
Feb 22, 2008I wrote a simple SSIS package that runs a batch and a stored proc. They both run fine. I can see the stored procedure run and in process under task manager I see the batch run. However I don't want the batch to run under the System account, how can I change to another user. Thank you.
View 4 Replies View RelatedSSIS Changing Column Order During Transformation
May 16, 2006First let me say, I really can't believe this chain of events myself--and they are happening to me.
I am upgrading several DTS packages to SSIS on what will be my new production server. These packages create tables, export them to a flat file, and ftp them off to other locations.
What is happening (on the SSIS side) is that the OLE DB Source is reordering some of the columns on its own (moving them to the end of the table/file. Then when my pickup/load routines run, the data is out of place and they fail.
Can anyone please explain what is happening here with the mapping. I have evaluated the table and the columns are in the order that I expect. When I preview the source table in the OLE DB Source Editor the columns are in the correct order/alignment, but when them in the OLE DB Source Editor --Columns section within BIDS the order is changed arbitrarily.
I have been somewhat successful (2 out of 3) in being able to re-map the data, but this last table just doesn't want to change.
Thanks in advance for any help and/or information you can provide
SSIS Changing Excel Tabs Dynamically
Mar 25, 2008
In my SSIS package I have a loop container that I am running the same code against 4 servers.
I have the package export the SQL data to an Excel spreadsheet that has multiple tabs.
Is there a way I can change the tab on the fly or do I need to create a Connection for the same spreadsheet 4 times
Each Connection pointing to a different tab?
I tried to set up a expression for the Excel Connection Manager to use the InitialCatalog for the tab and change it
based on the script in the loop however this causes the following error:
An OLE DB error has occurred. Error code: 0x80040E21. An OLE DB record is available. Source: "Microsoft Native Client" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
Cannot create an OLE DB accessor. Verify that the column metadata is valid.
Thanks in advance
Changing Destination Database For SSIS Package
Feb 23, 2007Hi,
I have a small problem. I've gone through the SSIS wizard and created a dtsx file which imports data from an access file into a SQL Server 2005 database. It has been set to delete existing rows and enable identity insert.
I then edited the .dtsx package in SQL Server Management Studio and added an environment variable configuration to allow me to change the destination database. In the script which runs the dtsx, here is what I have (it's an x64 system, so hi have to use DTExec):
"C:Program Files (x86)Microsoft SQL Server90DTSBinnDTExec.exe" /file e: estimport.dtsx /set Package.Connections[DestinationConnectionOLEDB].Properties[InitialCatalog];newdatabasename
and here is the error I get:
Description: The configuration environment variable was not found. The envir
onment variable was: "InitialCatalog". This occurs when a package specifies an e
nvironment variable for a configuration setting but it cannot be found. Check th
e configurations collection in the package and verify that the specified environ
ment variable is available and valid.
I got the package.connections.etc etc path from originally creating the environment variable as an xml config file, then I could open the config file and see what the path was...
Any help would be appreciated :)
Slowly Changing Dimension Task CRASHES SSIS
Apr 5, 2006We have successfully built a SSIS ETL implementation for a data mart. Most of our dimension loads are using the slowly changing dimensions task. We successfully built every package and had 1 complete successful load.
We have made a modification to one of the tables that now has 16 mil records in it. I open the dimension's package and it takes 30 sec - 1 minute to validate. When I go to the Data Flow tab and attempt to open the Slowly Changing Dimension task, SSIS will freeze up. I will get no response for hours. I my testing so far SSIS has yet to come back.
My CPU usage is below 5%. devenv.exe memory usage is at 113 Mb. My computer is using 400mb / 1Gb of memory. The status bar at the bottom says "ready". I have let it sit for up to 2 hours with no results. When I kill the process in the Windows Task Manager it ends instantly.
I have also tried deleting the task and adding a new Slowly Changing Dimension Task. When I select the table from the drop down I get the same results. I have noticed this with all my million + record tables that use the slowly changing dimension task but not the smaller tables.
I am also seeing the problem when I am in "Work Ofline" mode.
I am accessing a SQL 2005 server over a VPN connection. I am connecting to the server using a Native OLE DB OLE DB for SQL Server connection. My computer is running Windows 2000 SP4, Intel Pentium M1.86 Ghz, 1 Gb of RAM.
Can a Slowly Changing Dimension Task be used on large tables? I can understand the process taking a while to run but I do not understand why I can not edit the task.
Running SSIS On Different Servers Without Changing Connection Information
Nov 14, 2007What is the best way to run SSIS scripts on different servers without changing connection information. Our test server is ppntt140 and our production server is ppntd110. If I create a script on server ppntt140 what can I do so I can move it to server ppntd110 without changing any connection information? Database names are the same, it is just the server that changes. What is the best way to handle this? Thanks in advance.
View 4 Replies View RelatedSSIS - Slowly Changing Dimension Adding Duplicates???
Jun 5, 2007I am testing the SCD with some sample data and am seeing duplicate rows getting inserted into my table. When configuring the wizard I am prompted to select a key type (Business or Not a key column). I assumed that the SCD wizard would NOT insert a row that already has a business key in the dimension table but that doesn't seem to be the case??? Is that by design?
View 4 Replies View Related