CASE Statement Syntax
Jun 21, 2000
Can someone tell me what is wrong with my syntax? I am getting several errors:
Incorrect syntax near keyword 'CASE'
Incorrect syntax near keyword 'WHEN'
Incorrect syntax near '@Tablename'
CREATE PROCEDURE al_readcampsignup
@User_ID int,
@Pagenumber smallint,
@Tablename varchar(10)
AS
CASE @Mypagenumber WHEN 1 THEN SELECT Blah FROM tempcampsignup WHERE Camp_ID = @User_ID WHEN 2 THEN SELECT Blah FROM @Tablename WHERE Camp_ID = @User_ID WHEN 3 THEN SELECT Blah FROM @Tablename WHERE Camp_ID = @User_ID END
Thanks
View 1 Replies
ADVERTISEMENT
Jan 16, 2008
I am attempting to mask a user's SS# based on Users.DisplaySSN. I have gone over the code time and time again and can't find where the error is.
Error I'm getting:
Incorrect syntax near the keyword 'AS'.
Here's where the error lies:
CASE
(SELECT DisplaySSN FROM Users WHERE Users.UserID = @UserID)
WHEN False THEN
'xxx-xx-xxxx' + right(SocialSecurityNumber,0) AS SocialSecurityNumber
ELSE
vwEmp.SocialSecurityNumber
END
View 6 Replies
View Related
Feb 26, 2008
Hello experts!
I have a case statement that provides filtering of hours during certain days of the week. An example is the data I want to show on Sunday is different from the rest of the week. I am using....
Code Snippet
WHERE ((CASE WHEN Datepart(dw, TestDateTime) = 1 AND datepart(hh, TestDateTime) BETWEEN 8 AND 22 THEN 1 WHEN Datepart(dw, TestDateTime)
>= 2 AND datepart(hh, TestDateTime) BETWEEN 6 AND 23 OR
datepart(hh, TestDateTime) BETWEEN 0 AND 2 THEN 1 ELSE 0 END) >= @ShowCore)
Esentially it gives a parameter (@showcore) to where it shows the filtered hours when 1 is selected, and all hours if 0 is selected.
Basically, Sunday I want to show transaction from between 8am and 10pm, All other days would be 12am - 2am and 6am to 11:59:59 when selecting 1 as the parameter.
Any help is appreciated.
View 3 Replies
View Related
Nov 5, 2007
I have a view where I'm using a series of conditions within a CASE statement to determine a numeric shipment status for a given row. In addition, I need to bring back the corresponding status text for that shipment status code.
Previously, I had been duplicating the CASE logic for both columns, like so:
Code Block...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE
[logic for condition 1]
THEN 'Condition 1 text'
WHEN [logic for condition 2]
THEN 'Condition 2 text'
WHEN [logic for condition 3]
THEN 'Condition 3 text'
WHEN [logic for condition 4]
THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This works, but the logic for each of the case conditions is rather long. I'd like to move away from this for easier code management, plus I imagine that this isn't the best performance-wise.
This is what I'd like to do:
Code Block
...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE shipment_status
WHEN 1 THEN 'Condition 1 text'
WHEN 2 THEN 'Condition 2 text'
WHEN 3 THEN 'Condition 3 text'
WHEN 4 THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This runs as a query, however all of the rows now should "Error" as the value for shipment_status_text.
Is what I'm trying to do even currently possible in T-SQL? If not, do you have any other suggestions for how I can accomplish the same result?
Thanks,
Jason
View 1 Replies
View Related
May 6, 2008
Hello i wrote this case statement to choose the password for a certain user but seems not to work. I have to get custom1 from another table.
select cast(custom1 as varchar(5)) from dbo.newhiresraw where id =userid) when custom1 'C%' then password = abcd4321 when not 'C%' then password = [postalcode] end [postalcode].
Not sure if custom1 = C then password =abcd4321
If custom1 not = C then it will be a zipcode.
not sure on the syntax any suggestions
View 4 Replies
View Related
Aug 13, 2014
i was tasked to created an UPDATE statement for 6 tables , i would like to update 4 columns within the 6 tables , they all contains the same column names. the table gets its information from the source table, however the data that is transferd to the 6 tables are sometimes incorrect , i need to write a UPDATE statement that will automatically correct the data. the Update statement should also contact a where clause
the columns are [No] , [Salesperson Code], [Country Code] and [Country Name]
i was thinking of doing
Update [tablename]
SET [No] =
CASE
WHEN [No] ='AF01' THEN 'Country Code' = 'ZA7' AND 'Country Name' = 'South Africa'
ELSE 'Null'
END
What is the best way to script this
View 1 Replies
View Related
Jul 4, 2006
Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E
can any one help me in this?
please give me a sample query.
Thanks and Regards,
Kiran Suthar
View 7 Replies
View Related
May 5, 2015
I am attempting to run update statements within a SELECT CASE statement.
Select case x.field
WHEN 'XXX' THEN
 UPDATE TABLE1
  SET TABLE1.FIELD2 = 1
 ELSE
  UPDATE TABLE2
  SET TABLE2.FIELD1 = 2
END
FROM OuterTable x
I get incorrect syntax near the keyword 'update'.
View 7 Replies
View Related
Dec 18, 2001
I use the following statement:
SELECT OH.OHONR, CASE WHEN LV.LVTYP='VIL' THEN LV.LVT30 ELSE NULL END AS LE, CASE WHEN LV.LVTYP='SÄL' THEN LV.LVT30 ELSE NULL END AS LS INNER JOIN LV ON OHONR=LVONR
The result gives one row for each hit on EITHER of the CASE statements. (Two rows if both case stantements are true)
OHONR LE
OHONR LV
I want to have one row with the two fields after each other.
OHONR LE LV
I've also tried to use ' ' instead of NULL
How can I change the statement to achieve this!
/matss
View 3 Replies
View Related
Jan 9, 2001
Hi,
I require some help with a SP. I have written the following CASE
block but it is giving me an syntax error with Case statement.
Here @loc_id, @id_val and @inid are input parameters to the SP.
Basically what I am doing is I am selecting the column from table based on
the input parameter @loc_id I want to use Case and avoid IF statements as Case will reduce the execution time.
If any of you have faced such problem and have a sloution then do let me know.
-- SP section starts
CASE @loc_id
WHEN 1 THEN select @id_val = val1 from id_val where name = @inid
WHEN 2 THEN select @id_val = val2 from id_val where name = @inid
WHEN 3 THEN select @id_val = val3 from id_val where name = @inid
WHEN 4 THEN select @id_val = val4 from id_val where name = @inid
WHEN 5 THEN select @id_val = val5 from id_val where name = @inid
WHEN 6 THEN select @id_val = val6 from id_val where name = @inid
WHEN 7 THEN select @id_val = val7 from id_val where name = @inid
WHEN 8 THEN select @id_val = val8 from id_val where name = @inid
WHEN 9 THEN select @id_val = val9 from id_val where name = @inid
END
-- SP section ends
Thanks & Regards
____________________
Mukund Joshi
J.Mukund@zensar.com
View 1 Replies
View Related
Mar 15, 2005
Im looking to strip all non numeric values out of a string at the SQL level in order to compare it to similar user entered data.
Something like
SELECT REReplace(PhoneNumber,"[^0-9]","","ALL") AS NewPN
FROM Numbers
WHERE NewPN = 'UserEnteredNumber'
View 3 Replies
View Related
Mar 4, 2008
Hi,
I looked up select case statements and have used them for returning single values, but can't seem to get it working when returning a select statement..
I have my SPROC configured as below, can anyone help me out as to why its not working?
btw previously I had been using something like below, but in this case it wont work as I have to make more changes than just the WHERE genderID = @genderID (hmm, hopefully that makes sense, if not ignore my example lol)
IF @genderID > 2
..
ELSE
........WHERE genderID = @genderID
thanks very much once again!
mike123
CREATE PROCEDURE [dbo].[select_123]
(
@genderID tinyint
)
AS SET NOCOUNT ON
SELECT
CASE @genderID
WHEN 1 THEN
SELECT TOP 40 *
FROM tbl
WHERE .......
WHEN 2 THEN
SELECT TOP 40 *
FROM tbl
WHERE .......
ELSE
SELECT TOP 40 *
FROM tbl
WHERE .......
END
View 3 Replies
View Related
Jul 23, 2005
Hello all,I belive, my problem is probably very easy to solve, but still, Icannot find solution:declare @iintdeclare @zintcreate table bubusilala ([bubu] [int] NOT NULL ,[gogo] [int] NOT NULL ,[lala] [varchar] (3) NOT NULL )insert into bubusilala (bubu,gogo,lala) values (1,2,'ala')insert into bubusilala (bubu,gogo,lala) values (10,20,'aca')insert into bubusilala (bubu,gogo,lala) values (100,200,'bbb')insert into bubusilala (bubu,gogo,lala) values (11,21,'ccc')insert into bubusilala (bubu,gogo,lala) values (12,22,'abc')insert into bubusilala (bubu,gogo,lala) values (13,23,'cbd')set @i = 10set @z = 2select * from bubusilalawhere bubu in (case when @i > @z then (1,2)when @i < @z then (10,13) end)and gogo like '%a%'I get error, that statement is wrong in case near ','.I supose, it is not possible, to get from case a group of values.But why then, this works:select * from bubusilalawhere bubu in (case when @i > @z then (1)when @i < @z then (select gogo from bubusilala) end)and gogo like '%a%'This data are totaly simplified.agrh ... any ideas??Thank You in advance,Mateusz
View 3 Replies
View Related
May 26, 2006
Hi All,
I've looked through the forum hoping I'm not the only one with this issue but alas, I have found nothing so I'm hoping someone out there will give me some assistance.
My problem is the case statement in my Insert Statement. My overall goal is to insert records from one table to another. But I need to be able to assign a specific value to the incoming data and thought the case statement would be the best way of doing it. I must be doing something wrong but I can't seem to see it.
Here is my code:
Insert into myTblA
(TblA_ID,
mycasefield =
case
when mycasefield = 1 then 99861
when mycasefield = 2 then 99862
when mycasefield = 3 then 99863
when mycasefield = 4 then 99864
when mycasefield = 5 then 99865
when mycasefield = 6 then 99866
when mycasefield = 7 then 99867
when mycasefield = 8 then 99868
when mycasefield = 9 then 99855
when mycasefield = 10 then 99839
end,
alt_min,
alt_max,
longitude,
latitude
(
Select MTB.LocationID
MTB.model_ID
MTB.elevation, --alt min
null, --alt max
MTB.longitude, --longitude
MTB.latitude --latitude
from MyTblB MTB
);
The error I'm getting is:
Incorrect syntax near '='.
I have tried various versions of the case statement based on examples I have found but nothing works.
I would greatly appreciate any assistance with this one. I've been smacking my head against the wall for awhile trying to find a solution.
View 10 Replies
View Related
Feb 20, 2008
i want to display records as per if else condition in ms sql query,for this i have used tables ,queries as follows
as per data in MS Sql
my tables are as follows
1)material
fields are -- material_id,project_type,project_id,qty, --
2)AB_Corporate_project
fields are-- ab_crp_id,custname,contract_no,field_no
3)Other_project
fields are -- other_proj_id,other_custname,po
for ex :
vales in table's are
AB_Corporate_project
=====================
ab_crp_id custname contract_no field_no
1 abc 234 66
2 xyz 33 20
Other_project
============
other_proj_id other_custname po
1 xxcx 111
2 dsd 222
material
=========
material_id project_type project_id qty
1 AB Corporate 1 3
2 Other Project 2 7
i have taken AB Corporate for AB_Corporate_project ,Other Project for Other_project
sample query i write :--
select m.material_id ,m.project_type,m.project_id,m.qty,ab.ab_crp_id,
ab.custname ,op.other_proj_id,op.other_custname,op. po
case if m.project_type = 'AB Corporate' then
select * from AB_Corporate_project where ab.ab_crp_id = m.project_id
else if m.project_type = 'Other Project' then
select * from Other_project where op.other_proj_id=m.project_id
end
from material m,AB_Corporate_project ab,Other_project op
but this query not work,also it gives errors
i want sql query to show data as follows
material_id project_type project_id custname other_custname qty
1 AB Corporate 1 abc -- 3
2 Other Project 2 -- dsd 7
so plz help me how can i write sql query for to show the output
plz send a sql query
View 8 Replies
View Related
Aug 4, 2015
I'm getting an error as "Incorrect syntax near the keyword 'CASE' ". When trying to run this query.
CREATE PROCEDURE dbo.SP_CDB_EA2
@RiskRef varchar(100)
--drop table #Tmp
AS
BEGIN
[code]....
View 9 Replies
View Related
Oct 29, 2015
I cannot seem to find the syntax to combine IN + CASE in a WHERE clause
WHERE
ses.BK_MS_SESSION <= '2015-03'
AND vis.CAT_DRAW_STATUS =
(CASE ses.BK_MS_SESSION
WHEN '2015-03' THEN vis.CAT_DRAW_STATUS
ELSE
CASE stat.BK_MS_VISIT_STATUS
WHEN 'T' THEN 'X'
ELSE vis.CAT_DRAW_STATUS
END
END
) IN ('D','R')
View 7 Replies
View Related
May 15, 2008
Hi,
I am a newbie to this site and hope someone can help....
I have a select statement which I would like to create an extra column and put an if statement in it.... Current syntax is:
if(TL_flag= '1', "yes") as [Trial Leave]
it is coming up with an error.... I can use Select case but I should not need to as this should work?
Any ideas?
View 2 Replies
View Related
Feb 6, 2008
Hi everyone,
I am a newbie to SSIS and looking for answer to a simple search/replace style question.
I am building a derived column and looking for some expression syntax that can search for several strings in one column and set a value in a new column.
A bit like a case statement:
CASE ProductLine
WHEN 'R1' THEN 'Road'
WHEN 'M1' THEN 'Mountain'
WHEN 'T1' THEN 'Touring'
WHEN 'S1' THEN 'Other sale items'
ELSE 'Not for sale'
END,
The twist is that 'R1','M1','T1','S1' could feature anywhere in the string that is ProductLine.
Thanks for all your help,
regards,
Chris
View 12 Replies
View Related
May 4, 2015
What will be the best way to write this code? I have the following code:
BEGIN
declare
status_sent as nvarchar(30)
SET NOCOUNT ON;
case status_sent =( select * from TableSignal
[Code] ...
then if Signal Sent.... do the following query:
Select * from package.....
if signal not sent don't do anything
How to evaluate the first query with the 2 options and based on that options write the next query.
View 2 Replies
View Related
Feb 6, 2008
Hi guys,
I am looking for some syntax to help me with a traditional search/replace style requirement. I am wanting to examine the contents of one column and populate another.
similar to this SQL case statement
CASE ProductLine
WHEN 'R1' THEN 'Road'
WHEN 'M1' THEN 'Mountain'
WHEN 'T1' THEN 'Touring'
WHEN 'S2' THEN 'Other sale items'
ELSE 'Not for sale'
END,
the twist is that R1, M1 etc. can appear anywhere in the ProductLine column.
thanks for any assistance you can provide.
regards,
Chris
View 1 Replies
View Related
Jan 18, 2008
I am trying to use a case statement in one of my stored proc but I am stuck a little bit.Here is a example, something like:declare @id int set @id =1case @id When 1 then select * from contactsend case but this keeps on giving me error: Incorrect syntax near the keyword 'case'. Any help is appreciated!
View 7 Replies
View Related
Apr 22, 2008
Hi I have some question regarding the sql case statment.Can i use the case statement with the where clause.Example: SELECT FirstName, IDFROM myTablewhere case when ID= '123' then id = '123' and id='124' endorder by idBut the above code does not work.
View 9 Replies
View Related
Jun 2, 2005
Hi all,
I was wondering if there is any way in an sql statement to check whether the data your trying to get out of the DB is of a particular type, ie. Int, char etc. I was thinking about a case statement such as
<code>
CASE WHEN (MyNum <> INT) then 0 end AS MyNum
</code>
This has to be included in the sql statement cause I need this field to get other data.
Any thoughts on how to achieve this would be greatly appreciated.
If I’m in the wrong thread section please advise of best one to get help in.
View 1 Replies
View Related
Sep 17, 2005
Hi !!!i hope one of the sql specialists answer me about the best and most effeceint way to acheive what i am looking for Scenario:-------------i have a 3 tables related to each other Addresses, Groups and GroupAddressthe relation is for both addresses and groups is one to many in the GroupAddress.the behaviour in the application : user can add addresses to his address list and from the address list a user can add an address to many groups like if you have Group name "Freinds" and you add me in it and you have Football team group and you add me to it like that !!!not i have another function called "copy group"in the GroupAddress i have this data as example GroupID AddressID1 41 61 21 441 72 82 62 93 133 73 10and the group ID called "Freinds"i want to copy the group so i can have another group that has the same addresses by one click rather than collectiong them again one by one ...by the way the new copy will have a new group name ( as this is thebusiness logic so user can not have dupicate group name )so what is the best SQL statement that i need to copy the group ???i hope that clear enough!
View 2 Replies
View Related
Jan 23, 2002
I am trying determine if I can do something like the code below. I have done a left join on a table. In the select statement there are three possible values. Yes, No, or NULL. I could like to use a Case statement to determine if there is Null. If so, then output N/A in place of the Null. So then my possible valus are Yes, No, and N/A.
Any clues?
Thanks,
John
SELECT TOP 100
OfferDressRoomYN.yesno as OfferDressRoom
= CASE
WHEN offerDressRoomYN.yesno IS NULL THEN 'N/A'
END,
FROM dataquestionnaire dq
LEFT OUTER JOIN yesno OfferDressRoomYN ON dq.c3_1 = OfferDressRoomYN.yesnoid
View 2 Replies
View Related
Aug 27, 2001
Hi
Can anybody tell me how to execute store procedure in the case statement.
Thanks
View 1 Replies
View Related
Sep 23, 2002
How do l use the case statement to cater for these updates.
BEGIN TRANSACTION
UPDATE TBL_DEV_OL_NEW1
SET Entity = ('AB')
WHERE AB_CLIENT = 1
COMMIT
GO
BEGIN TRANSACTION
UPDATE TBL_DEV_OL_NEW1
SET Entity = Entity + '' + ' | SB'
WHERE SB_CLIENT = 1
COMMIT
GO
BEGIN TRANSACTION
UPDATE TBL_DEV_OL_NEW1
SET Entity = 'SB'
WHERE SB_CLIENT = 1 And entity is null
COMMIT
go
BEGIN TRANSACTION
UPDATE TBL_DEV_OL_NEW1
SET Entity = Entity + '' + (' | CI')
WHERE CI_CLIENT = 1
COMMIT
GO
BEGIN TRANSACTION
UPDATE TBL_DEV_OL_NEW1
SET Entity = 'CI'
WHERE CI_CLIENT = 1 And entity is null
COMMIT
GO
BEGIN TRANSACTION
UPDATE TBL_DEV_OL_NEW1
SET Entity = Entity + '' + (' | GEMS')
WHERE GEMS_CLIENT = 1
COMMIT
GO
BEGIN TRANSACTION
UPDATE TBL_DEV_OL_NEW1
SET Entity = 'GEMS'
WHERE GEMS_CLIENT = 1 And entity is null
COMMIT
GO
View 1 Replies
View Related
Feb 14, 2006
In my query below i have the results ,The thing to observe in the result set it for the name "Acevedo" , "Abeyta" its not doing a group by and populating the results in the following column.Rather its addind a new row and adding it as 1 in the next row.
I have to populate the counts in one row for common names.Shall i use a if condition within a case block.If yes how?any other work arounds would be appriciated.
Please help
Thanks
select
isnull(replace(Ltrim(Rtrim(P.Lastname)),',',''),'' ) Lastname
, case ProductID
WHEN 22 then count(S.Product)
Else 0
END AS Builders
, case ProductID
WHEN 23 then count(S.Product)
Else 0
END AS Associates
, case ProductID
WHEN 24 then count(S.Product)
Else 0
END AS Affiliates
FROM vwpersons p with (nolock)
join vwSubscriptions S with (nolock)
on S.RecipientID = P.ID
where P.Lastname in (select Ltrim(Rtrim(H.name)) from externaldata.dbo.Hispanicnames H)
group by P.Lastname, S.ProductID
having count(P.LastName)>=1
order by 1
Result set :
Firstname Builders AssociatesAffiliates
Abarca 010
Abascal200
Abelar 100
Abeyta100
Abeyta010
Abreu 100
Abreu 010
Acevedo100
Acevedo050
View 2 Replies
View Related
Aug 20, 2007
I am trying to get avg score by site, by call type. Columns are Site(varchar), Calltype(varchar), totalscore(float). Calltypes are A, B, C, D. Sites are 1, 2, 3, 4. I can do a straight average statement and only get one calltype.
I want to do a CASE statement to get all average scores for all calltypes.
Select Site, avg(totalscore) as [Avg Score]
FROM DB
WHERE calltype = 'A'
GROUP BY Site
Results
Site Avg Score (for A)
1 85
2 75.5
3 85.33
SELECT Site, AVG(CASE WHEN TotalScore > 0 AND CallType = 'A' THEN Totalscore
ELSE 0 END) AS [Avg Score For A]
FROM DB
GROUP BY Site
Results
Site Avg Score For A
1 i get 8.5
2 i get 37.75
3 i get 36.57
Why am I getting a difference?
Any help is greatly appreciated - thank you
View 1 Replies
View Related
Aug 18, 2004
Hi Ive got a simple query where I want to calculate an average of one number divided by the other ie: avg(x / y)
Im trying to use a case statement to return 0 in the event that y is 0, to avoid a division by zero error. My query is still returning a division by zero error anyway can anybody help?
SELECT CCode, CASE WHEN BS_TOTAL_ASSETS = 0 THEN 0 ELSE AVG(BSCLTradeCreditors / BS_TOTAL_ASSETS) END AS myaverage
FROM [Company/Year]
GROUP BY CCode, BS_TOTAL_ASSETS
Thanks
View 3 Replies
View Related
Apr 11, 2008
i ahve one fucniton:
create function fntotalcountcustclas
( @campaign varchar(50), @startdate datetime, @enddate datetime)
RETURNS TABLE
AS
RETURN
( Select t.itemnmbr,t.custclas, t.custclasdescription, t.totalcustclas as totalcount
from
(
select
vi.itemnmbr, replace(vc.custclas,'','Unspecified') as custclas, vc.custclasdescription, count(vc.custclas) as totalcustclas
from vwcustnmbr vc
join vwitemnbmr vi
on vi.sopnumbe=vc.sopnumbe
Where vi.Campaign = @Campaign and (vc.docdate between @startdate and @enddate)
group by vi.itemnmbr,vc.custclas, vc.custclasdescription
) as t
)
when i m executing it:
select * from fntotalcountcustclas('copd','1/1/2008','4/11/2008')
order by totalcount desc
i m getting results like:
itemnmbr,custclas,custclasdescription,totalcount
------------------------------------------------
06-5841 STANDARD Standard(web) 31
06-5840 STANDARD Standard(web) 30
kr-014 STANDARD Standard(web) 72
06-5841 INDPATIENT Patient 12
06-5840 INDPATIENT Patient 9
06-5845 INDPATIENT Patient 6
06-5841 PROGRAM Program 6
06-5841 INST-HOSPITAL Hospital 11
...................
Basically, i ahve to use one condition to get corrrect output related to inputs:
like - i have to input @category varchar(50), @category_value varchar(50)
and if category = 'campaign' then category_value = ''
then output should be itemnmbr sum(totalcount) [whatever should be custclas or custclasdesscription]
itemnmbr sumcount
-----------------
06-5840 52
06-541 101
06-452 26
kr-045 252
and if categroy = 'item' then category_value = any itemnmbrs(06-5840,06-5845,06-5841 etc..)
then output should be
itemnmbr custclas custclasdescription totalcount
-----------------------------------------------------
06-5840 STANDARD Standard(web) 31
06-5840 INDPATIENT Patient 9
06-5840 PROGRAM Program 6
06-5840 INS-HOSPITAL Hospital 17
like that..
can anyone help me to write case statement.
thanks a lot!!
create function fntotalcountcustclas
( @campaign varchar(50), @startdate datetime, @enddate datetime,
@category varchar(50), @category_value varchar(50))
RETURNS TABLE
AS
RETURN
( Select t.itemnmbr,t.custclas, t.custclasdescription, t.totalcustclas as totalcount,
case when category
from
(
select
vi.itemnmbr, replace(vc.custclas,'','Unspecified') as custclas, vc.custclasdescription, count(vc.custclas) as totalcustclas
from vwcustnmbr vc
join vwitemnbmr vi
on vi.sopnumbe=vc.sopnumbe
Where vi.Campaign = @Campaign and (vc.docdate between @startdate and @enddate)
group by vi.itemnmbr,vc.custclas, vc.custclasdescription
) as t
)
View 10 Replies
View Related
May 5, 2008
Im running the following sql statement but I dont see the
expected output. There are few differences between acc & cl1, mcc & cl2 , ncr & cl3 but I dont see either 'ONE' or 'TWO' or 'THREE'.
There is even a case where cl3 is null but the sql is not filling in either one or two or three. Query simply returns id & rest as null values.
SELECT P1.id,
CASE
WHEN p1.acc!= p1.cl1 then 'ONE'
WHEN p1.mcc!= p1.cl2 then 'TWO'
when p1.ncr!= p1.cl3 then 'THREE'
Else NULL END
As NOnMatchingColumn
from
(select id, acc, cl1,mcc,cl2,ncr,cl3 from dbo.ml)P1
View 5 Replies
View Related
