CLR Integration In SQL Server (Problem In Sp_configure 'clr Enabled', 1)
Aug 21, 2007
HIiiiiiii all
I have installed both sql server 2000 and sql server 2005 Developer Edition in my system as well as .net 2003 and 2005. Now i want to enable clr integration in sql server 2005. so when i write
sp_configure 'clr enabled', 1
GO
RECONFIGURE
GO
In Sql Statement then it gives me error
Msg 15123, Level 16, State 1, Procedure sp_configure, Line 78
The configuration option 'clr enabled' does not exist, or it may be an advanced option.
Valid configuration options are:
I have created a database user which have all the rights and roles. and while i check the stored system procedure sp_configure it is affacting mainly two system tables in the master tables
master.dbo.spt_values
master.dbo.sysconfigures
and this table does not contains field like ''clr enabled'' so tht we can change the state
so plz plz help me to enable clr in the sql server 2005.
I need it so muchhh...
Thanking you in advance
View 7 Replies
ADVERTISEMENT
Sep 28, 2007
When I am in Visual Studio 2005, and I try to add an SQL database, I get the following error "generating user instances in sql server is disabled. use sp_configure user instances enabled to generate user instances." I am currently using SQL server 2005 Express. What do I need to do, to create an SQL database? Thanks in advance.
View 4 Replies
View Related
Mar 13, 2008
I am running Windows Server 2003 R2 standard Edition with SP1, using IIS, and SQL Server 2000 Enterprise Edition. Server running 4 core processors with 4CGB of RAM. I have not changed any entries to the boot.ini or with SQL Server to take advantage of the memory. I am looking for the best way to utilize the hardware in the machine????
This is dedicated DB server under split server configuration
Would it be useful if swith to /3g for AWE enabled option for sp_configure?
Please suggest me the best configuration methods if any
Thanks in advance,
View 4 Replies
View Related
Mar 2, 2004
I am running the following command:
exec sp_configure 'allow updates', '0'
I get:
Server: Msg 15247, Level 16, State 1, Procedure sp_configure, Line 169
User does not have permission to perform this action.
What's causeing this?
Thanks!
Ken
View 1 Replies
View Related
Aug 1, 2007
Please some help. I had visual basic express installed on my computer and it worked. After I have been watching the video about the reportviewer I wanted it in my toolbox but it was not there. I put it on the forum and I was suggested to download SQL Server 2005 Express Edition with Advanced Services SP2 and Microsoft SQL Server 2005 Express Edition Toolkit. The reportvieuwer was there but it did not work. Now nothing is working anymore. I can't connect anymore to a database because off the message sp_configure etc. Also the option Create new Sql database is not availeble anymore. I'me working wth Vista. I have already removed everything en reinstalled it according microsofts visual express website but with the same result. Also when I try to install these programs I get a message:
- IIS Feature Requirement (Warning)
Messages
* IIS Feature Requirement
* Microsoft Internet Information Services (IIS) is either not installed or is disabled. IIS is required by some SQL Server features. Without IIS, some SQL Server features will not be available for installation. To install all SQL Server features, install IIS from Add or Remove Programs in Control Panel or enable the IIS service through the Control Panel if it is already installed, and then run SQL Server Setup again. For a list of features that depend on IIS, see Features Supported by Editions of SQL Server in Books Online.
I have enabled all IIS components.
View 3 Replies
View Related
Apr 11, 2008
Hi,i am using vwd2005 express and sql express.i have downloaded a web application and trying to run it. But when i run this application its showing some error in the page. like this:-Server Error in '/ProfileSample' Application.
Generating user instances in SQL Server is disabled. Use sp_configure 'user instances enabled' to generate user instances.
Description: An
unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the
error and where it originated in the code.
SQLExpress database file auto-creation error: The
connection string specifies a local Sql Server Express instance using a
database location within the applications App_Data directory. The
provider attempted to automatically create the application services
database because the provider determined that the database does not
exist. The following configuration requirements are necessary to
successfully check for existence of the application services database
and automatically create the application services database:
If the applications App_Data directory does not already exist, the
web server account must have read and write access to the applications
directory. This is necessary because the web server account will
automatically create the App_Data directory if it does not already
exist.If the applications App_Data directory already exists, the web
server account only requires read and write access to the applications
App_Data directory. This is necessary because the web server account
will attempt to verify that the Sql Server Express database already
exists within the applications App_Data directory. Revoking read access
on the App_Data directory from the web server account will prevent the
provider from correctly determining if the Sql Server Express database
already exists. This will cause an error when the provider attempts to
create a duplicate of an already existing database. Write access is
required because the web server accounts credentials are used when
creating the new database.Sql Server Express must be installed on the machine.The process identity for the web server account must have a local user profile. See the r But same application is running well in my friend system.I dont know whats wrong here.does anyone has a answer?Thanks.Jack
View 2 Replies
View Related
Apr 14, 2008
1.could any one tell me the difference between sp_dboption and sp_configure.
View 1 Replies
View Related
Dec 23, 2007
Another day in paradise. I updated to C# 2008 Express and the 2005 sql express.
Now I get the error in the Database Explorer of both 2005 and 2008 editions:
"Generating user instances in SQL Server is disabled. Use sp_configure 'user instances enabled' to generate user instances"
A search turned up this link which does address it:
http://forums.microsoft.com/msdn/showpost.aspx?postid=294798&siteid=1&sb=0&d=1&at=7&ft=11&tf=0&pageid=0
Their Answer:
Open the SQL Server Management Studio Express. This is the downloadable program in the same site where you downloaded the SQL Server 2005 express used to manage SQL Server 2005 Express.
In the query editor type this text: exec sp_configure 'user instances enabled', 1.
Then type: Reconfigure.
Then restart the SQL Server database.
Not very clear to me and what I did seems to have no effect. Please advise.
I found setting using user instances in the properties window to false does correct this but causes other problems.
View 1 Replies
View Related
Jan 7, 2008
Can someone help? I am new to Visual basic programming and have down-loaded Visual Basic Express. I followed the instructions for creating my first database but when I got to making the SQL database I got the following error message. " Generating user instances in SQL server is disabled, use sp_configure "user instances enabled" to generate user instances" Where do I find sp_configure and how do I start it.
View 1 Replies
View Related
Aug 22, 2006
I updated my default (only) instance of sql2k to 2005. I'm now working on fixing backward compatibility issues, among these sp_configure 'allow updates'.
According to the BOL, reconfigure will throw an error if 'allow updates' is set to 1. And updates to system tables is disallowed entirely. However, when I started my work on a script that does these things, it ran without error on the newly updated server.
This code works, and if I understand the BOL correctly, it should not:
sp_configure "Allow Updates", 1
GO
reconfigure with override <-- works without complaint
GO
update sysusers set name='283c' where uid=31 <-- works without complaint
update sysusers set name='283c' where uid=31 <-- works without complaint
go
sp_configure "Allow Updates", 0
GO
reconfigure
GO
Did I miss something in my upgrade? I used the wizard. The management tool reports my version as 8.0.760. This database was present during the upgrade. I have not restored it from backup.
View 1 Replies
View Related
May 23, 2007
Hi.
I right click the (root) Solution Explorer to add an SQL object (something.mdf) but I get an error message
that "Generating user instances in SQL Server is disabled. Use sp_configure 'user_instances enabled' "
WHERE DO I WRITE THE SP_CONFIGURE CODE IN VISUAL WEB DEVELOPER ?
(I don't see anything like new query of server and the one in the SQL SERVER management studio is already done).
10x
View 7 Replies
View Related
May 15, 2000
Hi, I've been through Books Online, Technet, MSN and the archives on this site trying to get a difinite answer on this. Everything except Technet indicates a maximum configurable value of 265003. However in Technet, it says that if you are running the enterprise edition with more than 2GB of memory that you can configure this to a much higher number (their example is 700000). Using the calculation involving memory, and based on several dozen performance tests, we would like to set our value to around 666000 (using the prime number of course). However we cannot get SQL to accept any value over the default maximum.
Is Technet wrong? Are we missing something? I cant find any reference other than in Technet on being able to use the higher number.
Thanks in advance,
Chris
View 1 Replies
View Related
May 6, 2002
Can Enterprise Manager under certain circumstances do sp_configure 'show advanced options' without the knowledge of the user ? And could this action lead to locking/blocking in the actual server ?
Brgds,
Odd
View 1 Replies
View Related
Mar 17, 2004
I am unable to access the default port 1433 on my SQL 2003 server. There is no firewall. I run telnet <ip> <port> and get "Connection failed" which explains my inability to connect to the server for weeks. I have being unable to connect to the server after I uninstalled sql 2000 and reinstalled it on my 2003 server. Some of the things I have checked is Network Configuration in EM. Named Pipes and TCP/IP is installed with port set to 1433. HKLMSoftwareMicrosoftMSSQLServerClientSuperSocketNetLibTcpDefaultPort port is set to 1433. Is there anything I need to configure on the server side to have the default sql server port enabled.
Thanks
View 2 Replies
View Related
Jan 9, 2008
Hello,
I have to find out whether my servers have hyperthreading enabled or not???? I am running Windows server 2003 Standard edition on many of my machines. I have to configure the SQL Server, server configuration values according to the Hyperthreading. I know about the CPUcount.exe utility but is there anything else apart from it??????
View 5 Replies
View Related
Jun 22, 2006
I have a database with Broker_Enabled set via the following command:
ALTER DATABASE 'xxxx' SET ENABLE_BROKER
All works well, I made a backup and want to move to my development machine. When I run I still get an error saying I need to enable broker service again.
"The SQL Server Service Broker for the current database is not enabled, and as a result query notifications are not supported. Please enable the Service Broker for this database if you wish to use notifications."
How can I move the database and get this setup? Where are the BrokerID's Stored?
Thanks,
~ Steve
View 5 Replies
View Related
Aug 12, 2014
I restarted the sql server after c2 audit was enabled and now i can not start the instance getting this error below. how do i bring the sql server up?
Cannot start C2 audit trace. SQL Server is shutting down. Error = 0x80070003(The system cannot find the path specified.)
View 2 Replies
View Related
Sep 15, 2015
UAT environment : SQL Server 2008 R2 SP3 Enterprise Edition
SANDBOX environment : SQL Server 2008 R2 SP3 Standard Edition
I have a database backup (.bak) that was taken from UAT environment that has CDC enabled on some tables. I want to restore that database into my SANDBOX environment which does not support CDC (because of standard edition). The restore process fails due to this incompatibility. Is there any way to restore without CDC (I dont CDC enabled on my SANDBOX; just my data from the backup) ?
View 0 Replies
View Related
Apr 21, 2004
Hello -
I have 2 databases on a remote server on which Replication and Replication Monitor is enabled. Now I want to move this databases from different remove location.
How do I transfer bboth databases with replication and replication monitor enabled on it with all the user logins.
Please help me out.
Thanks.
View 2 Replies
View Related
Jan 28, 2015
I have a DB with TDE enabled on Enterprise edition sql server 2008r2. I am actually planning on moving the DB to sql server 2008r2 standard edition. How to accomplish it properly. I don't think SQL Server 2008r2 standard edition support TDE. I can only think of turning off the encryption, but is there anything else I should know?
View 3 Replies
View Related
Mar 30, 2015
Sql server 2008R2 (SP2) Ent, PROD DB myDB was encrypted. During Release mistakenly (Vendor created script blames some settings in ...- actually does not matter) Decryption started (ALTER .. SET ENCRYPTION OFF) as we got from ErrorLog.
For some reason initial encryption scan was aborted and then mentioned command: ALTER ... OFF was issued again. What we have now (after 60 h of decryption- encryption took only 2.5 h)- is_encrypted = 0 in sys.databases, encryption_state = 5 (decryption in progress) in sys.dm_database_encryption_keys (percent_complete= 0). But it seems myDB is still encrypted- I made a backup of myDB and tried to read it (restore filelistonly) from other server (with no encryption)- failed- asked for key. Seems metadata was changed when initial scan during decryption started but then stuck and (if I am correct) decryption was never completed. Question- any similar experience? How we can fix meta- data, i.e. assuming that myDB is still encrypted we should have is_encrypted = 1 and encryption_state = 3 (encrypted).
View 2 Replies
View Related
Jul 30, 2015
My index reorganise maintenance plan fails partly due to the disabled indexes
Executing the query "ALTER INDEX [I_ModelSecurityCommon_RECID] ON [dbo]...
" failed with the following error: "Cannot perform the specified operation on disabled index 'I_ModelSecurityCommon_RECID' on table 'dbo. Model SecurityCommon'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
I don't want to delete the indexes as they are standard indexes that where on the DB from install.. any script that will reorganise all enabled indexes? and also to rebuild?
View 5 Replies
View Related
Jun 22, 2007
Using SQL Server 2005 SP2 std edition on Windows 2003 R2 SP2 x64 std edition I'm allowed to break the password policy.
To reproduce this behaviour as a system administrator run...
create login testuser with password='p'
This creates a login with the default of POLICY enabled ('Enforce Password Policy' check box is checked). OK, so may be system administrator is allowed to break the policy but now login as testuser and run
alter login testuser with password='t' old_password='p'
This succeeds despite obviously breaking the policy.
Surely this can't be right, I must be doing something wrong.
Any help will be greatly appreciated.
Tim Gordon-Jones
View 4 Replies
View Related
Oct 16, 2015
I am new to DBA activities. I have a database name Sample_DB in SQL Server 2014. Â
This database has below files
LogicalName FileType
FileGroup
Sample_DB_Rows  ROWS Data
PRIMARY
Sample_DB_C1 ROWS Data
Country1
Sample_DB_C2 ROWS Data
Country2
Sample_DB_Docs FILESTREAM Data
FileGroupForDoc
My database has 3 tables namely Tbl1, Tbl2 and Tbl3.
Tbl1 data stored in primary file group
Tbl2 is partitioned based on a key column CountryId and stored in respective filegroup
Tbl3 is enabled to store documents, files etc., and its data will be stored in filestream enabled filegroup.
Problem:
I need to take backup of each file group separately.
I need to restore the backed up file group separately. Is this possible, how to do it.
View 3 Replies
View Related
Apr 23, 2008
When I try to create a subscription to my SQL Server Compact 3.5-database file, it gives an SqlCeException-message that says that the file is not enabled for replication. How do enable it?
My SQL Server Management Studio won´t connect to my compact server file right now, so that method is not an option for me right now.
View 1 Replies
View Related
Oct 17, 2007
Hi,
I am trying to replicate some tables from an Sql Server database to an Oracle database. So the publisher is SQL Server and the Subscriber is Oracle.
Unfortunately I realised that I can't set the replicate_ddl parameter to 1 for an Oracle Subscriber. This is the error I got:
"The property "replicate_ddl" cannot be modified for publications that are enabled for non-SQL Server subscriptions."
I looked on the Internet and I found that this parameter "@replicate_ddl" (used in the add_publication stored procedure) can't be set to 1 if the @enabled_for_het_sub parameter is set to 'true'.
So I thought if I just set the replicate_ddl parameter to 1 and leave the other parameter to false and then use the sp_changepublisher stored procedure to set the enabled_for_het_sub parameter to true that will work. But it didn't. I tried this in Enterprise Manager and although I had no error I realised that the replicate_ddl parameter was reset to false.
Is there any way I can replicate the ddl statements in Oracle automatically or I should to them manually?
View 4 Replies
View Related
Jun 8, 2007
Dim strCON As String = _
"workstation id=DJI-MAIN;packet size=4096;user id=sa;integrated security=SSPI;data source=DJI-MAIN;persist security info=False;initial catalog=RacingSystem"
Dim cnn1 As New SqlConnection(strCON)
cnn1.Open()
This is the code I have been using to connect to my default instance for 18 months. A recent upgrade to Windows Live onecare now prevents me connecting to the server from the same machine. The following error message is generated:-
Unhandled Exception: System.Data.SqlClient.SqlException: SQL Server does not exist or access denied.
at System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction)
at System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction)
at System.Data.SqlClient.SqlConnection.Open()
at TrainerReport001.Form1.Form1_Load(Object sender, EventArgs e) in F:#ProjectsStatsOwnerReport001Form1.vb:line 84
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)The program '[3336] TrainerReport001.exe' has exited with code 0 (0x0).
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.SafeNativeMethods.ShowWindow(HandleRef hWnd, Int32 nCmdShow)
at System.Windows.Forms.Control.SetVisibleCore(Boolean value)
at System.Windows.Forms.Form.SetVisibleCore(Boolean value)
at System.Windows.Forms.Control.set_Visible(Boolean value)
at System.Windows.Forms.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(Form mainForm)
at TrainerReport001.Form1.Main() in F:#ProjectsStatsOwnerReport001Form1.vb:line 2
If I turn off the onecare firewall I can connect as normal, but this is not a desired option. I have tried enabling port 1433 on the firewall, this does not work either. Any help greatly appreciated, onecare support seems reluctant to help.
TIA
View 4 Replies
View Related
Dec 1, 2015
During a newly set up on one of our SQL server 2012:
We had enable the trace flags 1117 and 1118 as a good practice using DBCC TRACEON(1117,-1) and similar for 1118.
We have been base lining the server and it came to notice that trace flags are no more enabled.
Property               Value                              CaptureDate
DBCC_TRACESTATUSÂ TF 1117: Status = 1, Global = 1, Session = 0 Â Â Â 2015-10-20 00:00:00
DBCC_TRACESTATUS Â Â Â Â TF 1118: Status = 1, Global = 1, Session = 0 Â Â Â Â Â 2015-10-20 00:00:00
After reboot:
Property                 Value                                  CaptureDate
DBCC_TRACESTATUS      No trace flags enabled             2015-10-21 00:00:02.340
What can be the reason? What can be done to turn them on permanently, if its actually a good bet in enabling so.
View 5 Replies
View Related
Jun 14, 2015
I am using SQl Server 2012 Database Mirroring with around 40 gb as mdf and 1 gb as ldf. Now my ldf size increased . How to reduce ldf size while mirror enabled with mirror server and witness server. Can shrink the ldf with mirror enables.
View 4 Replies
View Related
Apr 16, 2015
If I have a table with 1 or more Nullable fields and I want to make sure that when an INSERT or UPDATE occurs and one or more of these fields are left to NULL either explicitly or implicitly is there I can set these to non-null values without interfering with the INSERT or UPDATE in as far as the other fields in the table?
EXAMPLE:
CREATE TABLE dbo.MYTABLE(
ID NUMERIC(18,0) IDENTITY(1,1) NOT NULL,
FirstName VARCHAR(50) NULL,
LastName VARCHAR(50) NULL,
[Code] ....
If an INSERT looks like any of the following what can I do to change the NULL being assigned to DateAdded to a real date, preferable the value of GetDate() at the time of the insert? I've heard of INSTEAD of Triggers but I'm not trying tto over rise the entire INSERT or update just the on (maybe 2) fields that are being left as null or explicitly set to null. The same would apply for any UPDATE where DateModified is not specified or explicitly set to NULL. I would want to change it so that DateModified is not null on any UPDATE.
INSERT INTO dbo.MYTABLE( FirstName, LastName, DateAdded)
VALUES('John','Smith',NULL)
INSERT INTO dbo.MYTABLE( FirstName, LastName)
VALUES('John','Smith')
INSERT INTO dbo.MYTABLE( FirstName, LastName, DateAdded)
SELECT FirstName, LastName, NULL
FROM MYOTHERTABLE
View 9 Replies
View Related
Jan 15, 2007
Hi Guys,
I have a SQL Server 2000 SP4 with 300 concurrent users, my Server has 12 GB RAM and 4 CPUS (Xeon 3.20 Ghz)
I've been strugglin with this server using 100% CPU, if i check on task manager how much memory is taking sqlserver.exe stays at 100-200 MB, AWE is enabled on SQL Server and boot.ini has the /3GB /PAE flags, this are the pictures from task manager regarding memory and CPU:
http://img114.imageshack.us/img114/5101/100cpuna9.jpg
http://img444.imageshack.us/img444/1319/memorymx1.jpg
I want to measure how much memory is taking and Perfmon show zeros (0) on every counter under MSSQL:memory (Connection Memory,Granted Workspace Memory , etc etc etc).
How can a i measure this?
The users are complaining about performance .
View 6 Replies
View Related
Nov 4, 2005
Can anyone tell me what this means and how to fix it? I created a stored procedure in VS2005 and did a build. When I went to SQL Server there was the stored procedure but when I run it I get the error....
View 24 Replies
View Related
Jun 11, 2007
Hi All,
When i run the command,
use master
go
sp_configure 'awe enabled',1
go
reconfigure
go
I got the output,
name : awe enabled
minimum: 0
Maximum: 1
config_value: 0
run_value: 0
From the value of config_value ,it mean that the "awe" is not enabled.
But, when we see the System Configuration:
OS --- Win 2003 Standard sp1
Sql server 2005 sp1 ( I have only one instance )
System configuration = 3.83 GB of RAM
The total is 3.83GB of RAM, but When i right click the sql server
instance , select 'Properties' and then on the 'General' tab , i
see 'Memory' assigned to that instance as = 3927 (MB)
Does this mean that, someone already has enabled AWE option. That's
the reason its showing memory = 3927 MB. (or) i have to enable it
externally.
Can someone reply as soon as possible plz.
Thanks.
View 4 Replies
View Related