CLR Stored Procedure Not Visible In Crystal Report XI
Jun 29, 2007
Hi guys
i am developing a Performance Management System for my organisation and reports are quite complex. so i thought to create a CLR stored procedure and then use this in Crystal Report.
The problem I am facing is that the CLR stored procedures I create using Visual Studio 2005 are not visible from Crystal Reports XI come with Visual Studio 2005. I can create stored procedures using standard transact sql and these are visible, but the CLR stored procedures are not.
I Simply create a CLR store procedure in Visual Basic and debug it. This CLR procedure then appeares under stored procedure node in SQL Server 2005.
I've noticed when I browse the stored procedures in my SQL Management Studio that the image of the stored procedure has a padlock shown in the icon, as if they are locked?
Do I have to explicitly enable a security attribute on CLR stored procedures to make them visible?
any help would be highly appretiated.
best regards
Ali
View 2 Replies
ADVERTISEMENT
Mar 15, 2004
I'm working on a stored procedure to populate a Crystal report. My company insists that we put the report parameters in the stored procedure instead of in Crystal...so that the SQL server (rather than the desktop)does the work of restricting the data. Is there anything I can do on the SQL side(possibly User Defined Data Type) to get Crystal to prompt me for a date WITHOUT the time? I started with this:
CREATE proc uspReportData @BeginDate datetime, @EndDate datetime
When Crstal prompts me for the parameters, I can type the date or use the calendar to pick a date, but I AM FORCED to enter a time. I know I could choose to ignore the time in the stored procedure, but the users don't want to see the time section of the parameter. Apparently SQL doesn't have a plain "date" parameter without a time.
I've also considered this:
CREATE proc uspReportData @BeginDate char(10), @EndDate char(10)
However if I do it this way, I can't seem to find a way to make sure a valid date is entered when Crystal prompts the user for the dates.
If using char(10) turns out to be the best method, is there a way I can pre-populate the Crystal prompts like this:
@BeginDate = 1st day of the current month
@EndDate = the current system date
Crystal seems to allow hard coded default values, but I can't find a way to do calculated default values.
I'm open to suggestions.
Thanks,
Mike
View 10 Replies
View Related
Aug 7, 2007
I've tried to find this documented on the Internet and found Crystal Reports User's Guid online documentation (582 pages of it!) It looks like it will be helpful for my other questions, but what I'm trying to do right now is call a stored procedure from my crystal report. So in Field Explorer under Database Fields my stored procedure is there with the three columns it selects. How do I put these three columns on my report? I try dragging them to Section 3 details and they're there but when I preview the report all I get are the headers, not the records. Is there something else I need to do? It requires an input parameter which I am not getting prompted for - maybe that is my problem, without an input parameter it can't successfully run the stored procedure, so how do I make it prompt me?
Thanks for helping me with my first Crystal Report!
View 2 Replies
View Related
Dec 20, 2005
I am trying to do some time series analysis on data that I have. I've read that the best way to do this is to use CLR to write the manipulation code in .Net and then load the assembly into SQL rather than extracting the data, manipulating it and putting it back again.
I'm using crystal reports with visual studio 2003 to do my reporting. The problem I am facing is that the CLR stored procedures I create using SQLExpress are not visible from my SQL explorer built into Visual Studio 2003. I can create stored procedures using standard transact sql and these are visible, but the CLR stored procedures are not.
I've noticed when I browse the stored procedures in my SQL Management Studio that the image of the stored procedure has a padlock shown in the icon, as if they are locked?
Do I have to explicitly enable a security attribute on CLR stored procedures to make them visible?
Any help would be greatly appreciated.
View 3 Replies
View Related
Apr 7, 2006
I have SQL express installed in my server and I created a stored procedure using SQL server management studio express, but when I refresh my stored procedures the one I created does not show. Please help.
Your valuable feedback is greatly appriciated.
View 4 Replies
View Related
Jan 27, 2005
Hi guys!
I am new in Crystal reports so please help me on this one.
I have to create a report that will bring back the TOP 20 customers per Sales Rep. My SQL stored procedure needs a parameter @SalesRep to execute. My stored procedure links between 2 tables. How do I get this stored procedure executed in Crysal Reports to give me results. The SP works fine.
THANKS!!
View 10 Replies
View Related
Aug 18, 2006
After I change a fairly complex stored procedure and I run a reportagainst it, crystal hangs at "assesing database". I have verified thedatabase. When I run a trace on SQL is shows repeated cachemiss overand over. I let it run for 30 minutes and nothing.Anyone?
View 5 Replies
View Related
Jul 20, 2005
Hello:I have a stored procedure for generating our invoices in CrystalReports. I have added a new field to the SP, but when I try to add thefield to my Crystal Report invoice, the field isn't available in thelist. However, if I create a new, blank report using the same storedprocedure as the datasource, the field is available. I've seeminglytried every iteration of "Verify Database" to no avail.The obvious answer would be to simply drop the sp from my existingreport and then re-add it. However, if you do this, all your fields onthe report are dropped.Any ideas?Thanks,Scott
View 1 Replies
View Related
Jul 12, 2007
Situation: If possible, create one stored procedure for Crystal Reports(CR). For any CR users ou
there, looking for coding suggestion also. Thank you for your assistance.
Currently, CR has a header(Report Header) coming from 1 to 1 tables, there is a parameter
which is passed in, allowing it to retrieve one record for the header(report header or RH).
The CR then has 4 subreports in which each has its own stored procedure. This I believe happens
because the Report Header records relationship to the subreport is 1 to many. The 3 remaining
subreports relationship to the Report Header is also a 1 to many. The main problem is the
subreports is that there may or may not have any records based on this, the subreport is
suppressed within CR and thus there can be alot of unused white space on the 1st page and one
of the subreports prints on a 2nd page when it could have been on the 1st page.
Example:
Main Stored Procedure(sp)
RH Tables: aaa, bbb, ccc, ddd are 1 to 1 record tables and have a @xyz parameter.
Results of subreports and their associated procedure are varchar(8000) decriptions. Each line
should be counted in some manner in the stored procedure(sp) and then should be counted in CR
to avoid excess white space. To complicate matters subreport 2 to has font, bold, showbox but
can have different font sizes. These variations could cause different line space requirements.
Any ideas?
Each line should be counted in some manner in the stored procedure and then should be counted
in CR. There is a count of records for each the main stored procedure.
RH has 1 record to many records in subreport 1 with same @xyz parameter.
RH has 1 record to many records in subreport 2 with same @xyz parameter.
RH has 1 record to many records in subreport 3 with same @xyz parameter.
RH has 1 record to many reords in subreport 4 with same @xyz parameter.
Because of the relationships, its seems impossible to create one stored procedure which give
in one select statement with all the 1 to 1, 1 to many relationsips, as stated above. I thought
concatinating i.e. 3 records together and then parsing it out some how in CR, along with
utilizing the i.e. 3 record count to help count lines. Thought of some how creating a temporary
table matrix for 8pt - 28pt for line and spacing considerations.
View 1 Replies
View Related
Oct 29, 1998
We're having problems with a number of stored procedures we have written (we're all v. new to SQL Server). The typical scenario is :
sp executes spA,spB and spC
Each uses a cursor, spA,spB and spC out values that sp wants to output with some additional info.
In ISQL/W the output is fine. When the sp is executed from a Crystal Report we always get a single row of data (the 1st). We get the same problem if it is executed from the Access Upsizing Tool's SQL Server Browser utility.
We use SET NOCOUNT ON in sp (not in the others).
If we remove SET NOCOUNT ON we get now rows in Crystal.
I enclose an example (with 3 sub- SPs). Help. Martin
CREATE PROCEDURE coral.qryPayEmp8_newtmp @lQryCompanyNumber int,@dtQryPeriodFromDate datetime,@dtQryPeriodEndDate datetime,@dtQryPayrollYearStartDate datetime,@szQryCompanyTaxReference varchar(30) AS
--variables used for cursors
DECLARE
@lCCUniqueID INT,
@lUniqueID INT,
@lEmployeeNumber INT,
@szEmployeeSurname VARCHAR (20),
@szInitials VARCHAR (4),
@szDeptNo VARCHAR (6),
@dtDateLeft DATETIME,
@EdTotalGrossPayThis FLOAT,
@EdTaxableGrossPayThis FLOAT,
@EdTotalGrossPayPrevious FLOAT,
@EdTaxableGrossPayPrevious FLOAT,
@EdTaxPaidThis FLOAT,
@EdTaxPaidPrevious FLOAT,
@EdSMPPaidToDate FLOAT,
@EdSSPPaidToDate FLOAT,
@PdTotalGrossPayThis FLOAT,
@PdTaxableGrossPayThis FLOAT,
@PdTaxPaidThis FLOAT,
@PdSMPPaid FLOAT,
@PdSSPPaid FLOAT,
@szNICategory VARCHAR (1),
--output from qryEmployeesNIbyCat
@SumOfdNIablePay FLOAT,
@SumOfdEmployersNI FLOAT,
@SumOfdEmployeeNI FLOAT,
@SumOfdContractedOutEarnings FLOAT,
@SumOfdEmployeeNIContractedOut FLOAT,
--output from qryEmployeeNICHol
@SumOfdEmployersNICHoliday FLOAT
SET NOCOUNT ON
DECLARE employee_period CURSOR
FOR
SELECT tblEmployees.lUniqueID,
tblEmployees.lEmployeeNumber,
tblEmployees.szEmployeeSurname,
tblEmployees.szInitials,
tblEmployees.szDeptNo,
tblEmployees.dtDateLeft,
tblEmployees.dTotalGrossPayThis,
tblEmployees.dTaxableGrossPayThis,
tblEmployees.dTotalGrossPayPrevious,
tblEmployees.dTaxableGrossPayPrevious,
tblEmployees.dTaxPaidThis AS EdTaxPaidThis,
tblEmployees.dTaxPaidPrevious,
tblEmployees.dSMPPaidToDate,
tblEmployees.dSSPPaidToDate
FROM tblEmployees
WHERE (tblEmployees.lCompanyNumber = @lQryCompanyNumber)
DECLARE employee_ni_categories SCROLL CURSOR
FOR
SELECT DISTINCT
tblEmployeePeriodDetails.lUniqueID,
tblEmployeePeriodDetails.cNICategory
FROM tblEmployeePeriodDetails
WHERE ((tblEmployeePeriodDetails.lUniqueID = @lUniqueID) AND
(tblemployeePeriodDetails.dtPeriodEndDate >= @dtQryPayrollYearStartDate))
OPEN employee_period
FETCH NEXT FROM employee_period INTO
@lUniqueID,
@lEmployeeNumber,
@szEmployeeSurname,
@szInitials,
@szDeptNo,
@dtDateLeft,
@EdTotalGrossPayThis,
@EdTaxableGrossPayThis,
@EdTotalGrossPayPrevious,
@EdTaxableGrossPayPrevious,
@EdTaxPaidThis,
@EdTaxPaidPrevious,
@EdSMPPaidToDate,
@EdSSPPaidToDate
WHILE (@@FETCH_STATUS <> -1)
BEGIN
EXEC qryPayEmp8b @lUniqueID,
@dtQryPayrollYearStartDate,
@SumOfdEmployersNICHoliday OUTPUT
EXEC qryPayEmp8c @lUniqueID,
@dtQryPeriodEndDate,
@PdTotalGrossPayThis OUTPUT,
@PdTaxableGrossPayThis OUTPUT,
@PdTaxPaidThis OUTPUT,
@PdSMPPaid OUTPUT,
@PdSSPPaid OUTPUT
OPEN employee_ni_categories
FETCH FIRST FROM employee_ni_categories INTO
@lCCUniqueID,
@szNICategory
IF (@@FETCH_STATUS <> -1)
WHILE (@@FETCH_STATUS <> -1)
BEGIN
EXEC qryPayEmp8a @lUniqueID,
@szNICategory,
@dtQryPayrollYearStartDate,
@SumOfdNIablePay OUTPUT,
@SumOfdEmployersNI OUTPUT,
@SumOfdEmployeeNI OUTPUT,
@SumOfdContractedOutEarnings OUTPUT,
@SumOfdEmployeeNIContractedOut OUTPUT
SELECT @lUniqueID AS lUniqueID,
@lEmployeeNumber AS lEmployeeNumber,
@szEmployeeSurname AS szSurname,
@szInitials AS szInitials,
@szDeptNo AS szDeptNo,
@dtDateLeft AS dtDateLeft,
@EdTotalGrossPayThis AS EdTotalGrossPayThis,
@EdTaxableGrossPayThis AS EdTaxableGrossPayThis,
@EdTotalGrossPayPrevious AS EdTotalGrossPayPrevious,
@EdTaxableGrossPayPrevious AS EdTaxableGrossPayPrevious,
@EdTaxPaidThis AS EdTaxPaidThis,
@EdTaxPaidPrevious AS EdTaxPaidPrevious,
@EdSMPPaidToDate AS EdSMPPaidToDate,
@EdSSPPaidToDate AS EdSSPPaidToDate,
@SumOfdEmployersNICHoliday AS SumOfdEmployersNICHoliday,
@PdTotalGrossPayThis AS PdTotalGrossPayThis,
@PdTaxableGrossPayThis AS PdTaxableGrossPayThis,
@PdTaxPaidThis AS PdTaxPaidThis,
@PdSMPPaid AS PdSMPPaid,
@PdSSPPaid AS PdSSPPaid,
@szNICategory AS szNICategory,
@SumOfdNIablePay AS SumOfdNIablePay,
@SumOfdEmployersNI AS SumOfdEmployersNI,
@SumOfdEmployeeNI AS SumOfdEmployeeNI,
@SumOfdContractedOutEarnings AS SumOfdContractedOutEarnings,
@SumOfdEmployeeNIContractedOut AS SumOfdEmployeeNIContractedOut
FETCH NEXT FROM employee_ni_categories INTO
@lCCUniqueID,
@szNICategory
END
ELSE
SELECT @lUniqueID AS lUniqueID,
@lEmployeeNumber AS lEmployeeNumber,
@szEmployeeSurname AS szSurname,
@szInitials AS szInitials,
@szDeptNo AS szDeptNo,
@dtDateLeft AS dtDateLeft,
@EdTotalGrossPayThis AS EdTotalGrossPayThis,
@EdTaxableGrossPayThis AS EdTaxableGrossPayThis,
@EdTotalGrossPayPrevious AS EdTotalGrossPayPrevious,
@EdTaxableGrossPayPrevious AS EdTaxableGrossPayPrevious,
@EdTaxPaidThis AS EdTaxPaidThis,
@EdTaxPaidPrevious AS EdTaxPaidPrevious,
@EdSMPPaidToDate AS EdSMPPaidToDate,
@EdSSPPaidToDate AS EdSSPPaidToDate,
@SumOfdEmployersNICHoliday AS SumOfdEmployersNICHoliday,
@PdTotalGrossPayThis AS PdTotalGrossPayThis,
@PdTaxableGrossPayThis AS PdTaxableGrossPayThis,
@PdTaxPaidThis AS PdTaxPaidThis,
@PdSMPPaid AS PdSMPPaid,
@PdSSPPaid AS PdSSPPaid
CLOSE employee_ni_categories
FETCH NEXT FROM employee_period INTO
@lUniqueID,
@lEmployeeNumber,
@szEmployeeSurname,
@szInitials,
@szDeptNo,
@dtDateLeft,
@EdTotalGrossPayThis,
@EdTaxableGrossPayThis,
@EdTotalGrossPayPrevious,
@EdTaxableGrossPayPrevious,
@EdTaxPaidThis,
@EdTaxPaidPrevious,
@EdSMPPaidToDate,
@EdSSPPaidToDate
END
CLOSE employee_period
DEALLOCATE employee_period
DEALLOCATE employee_ni_categories
RETURN
-----------------
CREATE PROCEDURE coral.qryPayEmp8a
@lUniqueID INT = 1,
@szNICategory VARCHAR (1) = 'A',
@dtPayrollYearStartDate DATETIME = '1900-01-01 00:00:00.000',
@SumOfdNIablePay FLOAT OUTPUT,
@SumOfdEmployersNI FLOAT OUTPUT,
@SumOfdEmployeeNI FLOAT OUTPUT,
@SumOfdContractedOutEarnings FLOAT OUTPUT,
@SumOfdEmployeeNIContractedOut FLOAT OUTPUT
AS
SELECT DISTINCT
@SumOfdNIablePay = Sum(tblEmployeePeriodDetails.dNIablePay),
@SumOfdEmployersNI = Sum(tblEmployeePeriodDetails.dEmployersNI),
@SumOfdEmployeeNI = Sum(tblEmployeePeriodDetails.dEmployeeNI),
@SumOfdContractedOutEarnings = Sum(tblEmployeePeriodDetails.dContractedOutEarning s),
@SumOfdEmployeeNIContractedOut = Sum(tblEmployeePeriodDetails.dEmployeeNIContracted Out)
FROM tblEmployeePeriodDetails
WHERE ((tblEmployeePeriodDetails.lUniqueID = @lUniqueID) AND
(tblEmployeePeriodDetails.cNICategory = @szNICategory) AND
(tblEmployeePeriodDetails.dtPeriodEndDate >= @dtPayrollYearStartDate))
GROUP BY tblEmployeePeriodDetails.lUniqueID, tblEmployeePeriodDetails.cNICategory
RETURN
-----------------------------
REATE PROCEDURE coral.qryPayEmp8b
@lQryUniqueID INT = 1,
@dtQryPayrollYearStartDate DATETIME = '1900-01-01 00:00:00.000',
@SumOfdEmployersNICHoliday FLOAT OUTPUT
AS
SELECT
@SumOfdEmployersNICHoliday = Sum(tblEmployeePeriodDetails.dEmployersNIforNICHol iday)
FROM tblEmployeePeriodDetails
WHERE ((tblEmployeePeriodDetails.lUniqueID = @lQryUniqueID) AND
(tblEmployeePeriodDetails.dtPeriodEndDate >= @dtQryPayrollYearStartDate))
RETURN
--------------------
CREATE PROCEDURE coral.qryPayEmp8c
@lQryUniqueID INT = 1,
@dtQryPeriodEndDate DATETIME = '1900-01-01 00:00:00.000',
@PdTaxableGrossPayThis FLOAT OUTPUT,
@PdTaxPaidThis FLOAT OUTPUT,
@PdSMPPaid FLOAT OUTPUT,
@PdTotalGrossPayThis FLOAT OUTPUT,
@PdSSPPaid FLOAT OUTPUT
AS
SET NOCOUNT ON
SELECT @PdTotalGrossPayThis = tblEmployeePeriodDetails.dTotalGrossPayThis,
@PdTaxableGrossPayThis = tblEmployeePeriodDetails.dTaxableGrossPayThis ,
@PdTaxPaidThis = tblEmployeePeriodDetails.dTaxPaidThis,
@PdSMPPaid = tblEmployeePeriodDetails.dSMPPaid,
@PdSSPPaid = tblEmployeePeriodDetails.dSSPPaid
FROM tblEmployeePeriodDetails
WHERE ((tblEmployeePeriodDetails.lUniqueID = @lQryUniqueID) AND
(tblEmployeePeriodDetails.dtPeriodEndDate = @dtQryPeriodEndDate))
RETURN
View 2 Replies
View Related
Dec 30, 2014
I am a newbie to SQL and I am trying to create a stored procedure to use with Crystal Reports.
I don't understand why I am having trouble joining tables to the Member table. These table joins have worked in the past.
Create Proc rpmb_FamilyPortraitDirectoryP1Test
(
@ChurchId int,
@StartFamilyName varchar(50),
@EndFamilyName varchar(50),
@MemberTypeId varchar(max) = Null,
[Code] ....
View 4 Replies
View Related
Jul 1, 2015
We have more that 500 crystal reports and we would like to find out list of stored procedure used by crystal reports. Can we find out ?
View 4 Replies
View Related
Jun 8, 2006
When I preview a report that has a link to a details report page in VS a "Back to Parent Report" button is displayed. However, when I publish the report to the Report Server, the .aspx page doesnt display the "Back to Parent Report" button. Is there a setting I need to make to have the button displayed?
thanks, lance
View 23 Replies
View Related
Aug 10, 2007
I've created an app that connects to a SQLCE database. I need to create Crystal Reports that connect to the database. There is no ODBC driver for SQLCE. How can I do this?
Thanks,
Kathy
View 9 Replies
View Related
Jan 12, 2007
I am a Web developer. I am new to VB 6.0 and Crystal Report. I havejoined an organisation where there is an application running(developedin VB6 and crystal report 7). I have to modify one report. In twocolumns I have to make minor changes i.e put and = operator. I amencountering following problem:1. When I open the report using Seagate crystal report for rational /32 bit crystal Report Designer there are three columns which are goingout side the visible area and I am not able to scroll up to them. Iincreased the page margin (left / right) and made it to zero and zerobut still I am not able to see those columns. Please guide.2. Please suggest any good web site for learning Crystal Report 7Thanks n RegardsDeepak Sinha
View 2 Replies
View Related
Aug 30, 2006
I've been building and testing my reports and have found that if I decide that a report parameter should be removed, removing the parameter causes the report to fail.
If I remove a report parameter via the 'Report Parameters' menu, and I also remove the associated data dimension, filter expression and parameter check boxes, when I preview the report I get an error message. It appears the report is searching for the old parameter name even after it has been deleted.
This leaves me with the option of either restoring the parameter as it was, or rebuilding the report from scratch. I've done some investigation and the parameters seem to exist within the XML code that underlies the report despite the parameters being deleted.
Is there a way to avoid this problem?
View 3 Replies
View Related
Mar 19, 2007
Hello,
I have several reports that use parameters that I have defined as multi-value. When I am designing the reports I see the "(Select All)" option listed first in each parm control that has the multi-value property set true. However, when the same reports are deployed to our server and viewed through Report Manager, the "(Select All)" option is missing. I need the "(Select All)" to be present.
I've seen some discussion of a service pack. Could this be the problem? What do we need to do to get our "(Select All)" back?
Thanks,
BCB
View 6 Replies
View Related
Aug 27, 2015
I am able to preview my report in Microsoft Visual Studio with a chart embedded at the top of the report. However after uploading the report to Report Manager, the chart is blank. How can I get the chart to be visible in Report Manager? I am using SQL Server 2012 on a Windows Server 2012 R2 machine. I can see the chart if I edit the report in Report Building in the print layout mode. I can also see the chart in my Microsoft Visual Studio Project.
View 5 Replies
View Related
Apr 26, 2002
Hi,
I am trying to run the crystal report from asp.
its says SQL Server connection failed. But i could connect SQL server using the same DSN. Any idea???
Set crp = Server.CreateObject("Crystal.CRPE.Application")
iReturn = crp.LogOnServer("p2sodbc.dll", "DSNNAME","USERID","PASSWORD")
Set oRep = crp.OpenReport("C:inetpubwwwrootpdftestest.rpt")
oRep.Preview
Set crp = nothing
Thanks
Ilango
View 1 Replies
View Related
Jan 12, 2004
Does Crystal Report 8.5 work OK with SQL Server 2K ?
Anyone encoutered problems for with this couple of programs ?
View 3 Replies
View Related
Sep 27, 2007
How can I convert a crystal report to a pdf format.ASP.net is not loaded in my machine.pls help me...
View 3 Replies
View Related
Feb 25, 2008
I have a report that feeds the data from SQL 2000 and its giving me this error:
Failed to retreive data from the database.
Details: ADO Error Code: 0x80004005
Source: Microsoft OLE DB Provider for SQL Server
Description: [DBNETLIB][ Connection Open (Connect ()).] SQL Server does not exist or access denied.
SQL State:08001
Native Error: 17 [Database Vendor Code: 17]
I test the database and its ok, we update both Crystal and SQL and nothing happend. We test communication from PC to server and everything looks OK. We check ODBC Settings and looks fine...
Thanks in advance
View 2 Replies
View Related
Mar 4, 2001
we have data base in ms access and reports in crystal reports 5 recently we converted our data base to sql sever 7
and reports to crystal reports 8. when i opend directly in cystal reports and given data base connecting through oledb
i am getting reports but from the application it is in vb6 the report window is poping up and latter a error msg saying un able to open sql server
when i checked up the connection it is ok help me
anil
View 2 Replies
View Related
Dec 8, 2005
I'm using Crystal 9 with SQL Server database. I have a report that was working fine for the first 8 months. As soon as I add another month, the report fails. I've tried different setting in my indexes with different variations of periods. The minute I have over 8 periods included, the report fails. No errors, just no data. I don't even have a clue where to look for possible answers on the Internet.
Can any one help or direct me to some resources??
Thanks,
Debbie
View 4 Replies
View Related
Mar 21, 2006
and if so does anyone know where I can find some code examples?thanks
View 1 Replies
View Related
Jun 14, 2007
Hello,
There is probably a really simple solution to this problem... but, here it is..
I am working on CR Designer v11 and have a report that uses a stored procedure. Originally, when the report was created, this stored procedure had one parameter. Since then, however, I have added an additional parameter to the SP in SQL. After doing so, I opened the report, in report designer, and manually added the new parameter to the parameter list. I then realized that I did not need to do this. The Verify Database function should auto populate the parameter list for me. So, I then deleted the parameter(that I had created manually) and performed the Verify Database. But now the parameter does not auto populate in the parameter list.
By deleting the parameter (that I had created manually), did I cause the designer to ignore this second parameter in the actual SP? How can I get the designer to auto populate the parameter list with this new parameter?
View 1 Replies
View Related
Feb 14, 2008
HI,
I have a windows .net program that creates and displays crystal reports. I was able to download all
the .dlls a needed such as the CrystalDecisions, etc.., however, when i ran my program it tells methat I cannot run these .dlls outside of managed code. Where do I need to put these .dlls and how do I make my application work?
THanks
View 4 Replies
View Related
Oct 19, 2007
Hi all,
need help to convert Sum(a, b) i found in Crystal Report to SSRS.
a = the dataset that i want to subtotal
b = the group
thanks!
Addin
View 1 Replies
View Related
Apr 23, 2008
Can I create reports with Crystal Reports and Deploy them in SSRS?
Thanks in advance,
saied
View 1 Replies
View Related
May 20, 2015
In a report called ICD_PrivateHospital, I have designed to show output to two table from two store procedures. 1st store proc: usp_RPT_Private and 2nd store proc: usp_RPT_Private2.
I have created both the store procs and it is executing successfully. I also have designed the Crystal Report in Visual Studio 2008.
I have added both the store procs in the crystal report with no error. I only wants to show top 20 records. It is running successfully when I add the fields and parameters from the first store procedure. But when I add the 2nd store procedures fields into the report, duplication occurs for both the results in store proc 1 and store proc 2. How to solve this issue?
View 5 Replies
View Related
Jun 12, 2007
hey i m startint in reporting services 9 and i find it so interesting but kinda slow, which is faster reporting services 9 or crystal report 11?
best regards
Joseph
View 6 Replies
View Related
Sep 17, 2007
Converting Crystal Report formula to SSRS
I've got a formula written in Crystal Reports that I'm trying to re-do in SSRS 2005. I've just been using Crystal Reports for so long, I've got a mental road-block today.
Here is the formula in Crystal Reports:
IF {V_VIEW.FIELD1} IN ["AAA", "BBB", "CCC", "DDD",
"EEE", "FFF"]
THEN ({V_VIEW.FIELD2}&"*")
ELSE ({V_VIEW.FIELD2})
(It concatonates an asterisk to the end of FIELD2 if FIELD1 contains on of the values in the list.)
In SSRS I'd like to cause an entire row to be bold if FIELD1 contains one of the values in the list.
So in SSRS I'm putting an expression into the FontWeight properties of the TableRow and trying for something (which doesn't work yet) like:
=iif (Fields!FIELD1.Value IN ("AAA", "BBB", "CCC", "DDD", "EEE", "FFF"), "BOLD", "NORMAL")
(SSRS doesn't like the "IN" in the above statement.)
Can anyone offer a suggestion on how to write this for SSRS?
Thanks!
-ErikR
------UPDATE------
2007-SEPT-17
Ok. I found a workable solution. Does anyone have a better suggestion than the following? The below works but it seems it could be done more simply... Any suggestions?
=iif (Fields!FIELD1.Value = "AAA","Bold",
iif(Fields!FIELD1.Value = "BBB","Bold",
iif(Fields!FIELD1.Value = "CCC","Bold",
iif(Fields!FIELD1.Value = "DDD","Bold",
iif(Fields!FIELD1.Value = "EEE","Bold",
iif(Fields!FIELD1.Value = "FFF","Bold",
iif(Fields!FIELD1.Value = "GGG","Bold",
iif(Fields!FIELD1.Value = "HHH","Bold",
iif(Fields!FIELD1.Value = "III","Bold",
iif(Fields!FIELD1.Value = "JJJ","Bold",
iif(Fields!FIELD1.Value = "KKK","Bold",
iif(Fields!FIELD1.Value = "LLL","Bold",
iif(Fields!FIELD1.Value = "MMM","Bold",
iif(Fields!FIELD1.Value = "NNN","Bold",
iif(Fields!FIELD1.Value = "OOO","Bold",
iif(Fields!FIELD1.Value = "PPP","Bold",
"Normal"))))))))))))))))
View 2 Replies
View Related
Oct 11, 2005
Hi,
I am using SQL server 2000, Crystal Reports 8.5. I dont see any problem with accessing thro' VB Coding(ADODB).
Crystal Report connection thro ODBC also working fine.
But when i try to connect to database thro "More data sources" -> SQL server , i was thrown out with an error "Unable to connect to SQL server servernam"
I have uninstalled & Reinstalled both SQL server and Crystal Report. Still not working.
I have been struggling with this problem for quite a long time.
Can any one give me the solution for this ??
Regards
SRagghu
View 1 Replies
View Related
