At one seemingly inoccuous step in my CLR stored procedure, execution stops and the query times-out.
I've tried debugging the stored proc by stepping into it from within VS. When I do, I get to the code in question, but then simply get this message:
WARNING: Debugger was accessing T-SQL variables while managed code was not suspended.
Waiting until the access is done to continue T-SQL execution.
Continueing T-SQL execution.
And these messages appear to repeat indefinitely. I'm running SQL Server locally on my machine, but this also happens on out development SQL Server server.
The place in the code it appears to happen is when returning back results from a lower-level CLR stored proc called within the higher-level CLR stored proc -- when piping the result set, I suppose.
We have a problem with one of our MS SQL 2000 databases and some stored procedures.
I'm not sure exactly what the problem is, but these are the symptons....
The stored procedure runs without problems for a period of time. Abruptly, without warning it begins to time out when called from our web application.
Calling it through the query analyzer it runs within a second.
Forcing the stored procedure to recompile allows the web application to start calling it again without it timing out.
We have a DTS package that runs over night and imports a number of records (not sure on the exact numbers, but definately enough to make a difference to indexes) so this could be part of the problem although when I force a recompile I do not do any update stats or anything else.
I wrote a test script to call the stored procedure when it was timing out to ensure it wasn't a web application problem and the procedure continued to time out until the forced recompile. So I don't think the problem is there.
The stored procedure returns multiple results sets and when it starts timing out it is while it is returning the second results sets.
The code for the second results set is...
Select avg(round(p.PricingValue, 5)) as Average, stdev(round(p.PricingValue, 5)) as StdDev, min(p.CaptureDate) as FromDate, max(p.CaptureDate) as ToDate From Pricing p Inner Join Security s On p.SecurityID = s.SecurityID Left Outer Join Issuer i On s.IssuerID = i.IssuerID WHERE p.PricingTypeID = @PricingType And p.TenorTypeID = @TenorType And p.CaptureDate Between @DateFrom And @DateTo AND p.SecurityID IN ( SELECT SecurityId FROM UserResult ur WHERE ur.UserResultSelected = 1 AND ur.UserID = @userID )
Does anyone have any idea what might be going on here?
We have a high volume database with 1000's of users and 1000's of procs. Our application enforces a 20 second timeout on all connections.
We can't adjust the 20 seconds - this is a business rule.
It sometimes happens that a proc does not complete within 20 seconds and then times out halfway though. This causes data inconsistency where 50% of the code was saved to the DB and 50% was not - seeing that a stored proc is not transactional and therefor does not roll back the code.
We can't put the code in a TRANSACTION in order to roll back when a time out occurs, because this causes exclusive locks on the tables.
So I guess my question is: Is it possible to undo/rollback all the code in a proc when a timeout occurs - without using a TRANSACTION? And if a TRANSACTION is the only way - how do I avoid the exclusive lock and blocks?
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie exec dbo.DeriveStatusID 'Created' returns an int value as 1 (performed by "SELECT statusID FROM statusList WHERE statusName= 'Created') but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie: exec dbo.AddProduct_Insert 'widget1' which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID) I want to simply the insert to perform (in one sproc): SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID) This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example). My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert). Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
I executed them and got the following results in SSMSE: TopSixAnalytes Unit AnalyteName 1 222.10 ug/Kg Acetone 2 220.30 ug/Kg Acetone 3 211.90 ug/Kg Acetone 4 140.30 ug/L Acetone 5 120.70 ug/L Acetone 6 90.70 ug/L Acetone ///////////////////////////////////////////////////////////////////////////////////////////// Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming: //////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class ///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors: Error #1: Type 'SqlConnection' is not defined (in Form1.vb) Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb) Error #3: Array bounds cannot appear in type specifiers (in Form1.vb) Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance, Scott Chang
More Information for you to know: I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly. I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete] @QQ_YYYY char(7), @YYYYQQ char(8) AS begin SET NOCOUNT ON; select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
I have a sub that passes values from my form to my stored procedure. The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page. Here's where I'm stuck: Public Sub InsertOrder() Conn.Open() cmd = New SqlCommand("Add_NewOrder", Conn) cmd.CommandType = CommandType.StoredProcedure ' pass customer info to stored proc cmd.Parameters.Add("@FirstName", txtFName.Text) cmd.Parameters.Add("@LastName", txtLName.Text) cmd.Parameters.Add("@AddressLine1", txtStreet.Text) cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue) cmd.Parameters.Add("@Zip", intZip.Text) cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text) cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text) cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text) cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text) cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text) ' pass order info to stored proc cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue) cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue) cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue) 'Session.Add("FirstName", txtFName.Text) cmd.ExecuteNonQuery() cmd = New SqlCommand("Add_EntreeItems", Conn) cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc) <------------------------- Dim li As ListItem Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar) For Each li In chbxl_entrees.Items If li.Selected Then p.Value = li.Value cmd.ExecuteNonQuery() End If Next Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder) and pass that to my second stored procedure (Add_EntreeItems)
I have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.
How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?
Has anyone encountered cases in which a proc executed by DTS has the following behavior: 1) underperforms the same proc when executed in DTS as opposed to SQL Server Managemet Studio 2) underperforms an ad-hoc version of the same query (UPDATE) executed in SQL Server Managemet Studio
What could explain this?
Obviously,
All three scenarios are executed against the same database and hit the exact same tables and indices.
Query plans show that one step, a Clustered Index Seek, consumes most of the resources (57%) and for that the estimated rows = 1 and actual rows is 10 of 1000's time higher. (~ 23000).
The DTS execution effectively never finishes even after many hours (10+) The Stored procedure execution will finish in 6 minutes (executed after the update ad-hoc query) The Update ad-hoc query will finish in 2 minutes
I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server.
Whenever I tried to right click stored procedure and select step into store procedure> i get following error
"User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information"
I am not sure what needs to be done on sql server side
We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master.
Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean?
I have a stored procedure 'ChangeUser' in which there is a call to another stored procedure 'LogChange'. The transaction is started in 'ChangeUser'. and the last statement in the transaction is 'EXEC LogChange @p1, @p2'. My questions is if it would be correct to check in 'LogChange' the following about this transaction: 'IF @@trancount >0 BEGIN Rollback tran' END Else BEGIN Commit END. Any help on this would be appreciated.
Hi I have a query which executes in 1 second and returning 14 rows whenever I execute it through Management Studio but when I execute it from a web page I am getting a timeout message and the stack trace is pointing towards the line which calls the stored procedure. The query is quite complex and there quite a few joins on tables and views including one to a lookup table, whenever I take out join onto the look up table the web page runs ok without timing out. I join the Lookup table (Parts) using a Left Outer Join similar to below. The syntax of the Join is fine but I cant find why it would cause the query to time out when executed from a webpage but is fine when I execute it from Management Studio select * from tables/view LEFT OUTER JOIN Parts on Parts.PartNumber=tables/View.PartNumber I've tried recompiling the Parts table but it didnt make any difference. Any help would be much appreciated. Cheers, Frankie
I use SQL Server to provide data to asp web pages and have recently started to get ODBC time outs throughout the day.
The environment is as follows: Server with dual PII processors & 512MB RAM running: - SQL Server 7 - IIS
I have a number of asp based web sites hosted on this box, but only 1 of them seems to be affected by the time out problem. I have checked the resources on the server (NT Task Mgr - Memoey & Processor) and everything seems fine - in fact the resources are hardly being touched!!! Within a few minutes the problem disappears completely without me doing anything.
Am I missing something here? Should I look elsewhere other than SQL - maybe IIS ??? Any suggestions / pointers would be very much appreciated.
We are using asp's and tables sucessfully but when we click a link to an exe on a page it is slow, to the point of timing out. Very slow. Any help would be appreciated. Email me tperry@kpmg.com
What could be the reason for my view to timeout? I thought it was because of the number or records, but i guessed wrong. The view is grabbing data from a UDF i have created.
I am trying to use statistics to get the time it takes to run a sql function. When I use SET STATISTICS TIME ON it returns multiple results (one for each insert statement in my loop). Is there any way to get results for the ENTIRE function? Here is the loop that I am timing.--> (It simply populates a calendar table)
SET NOCOUNT ON DECLARE @Counter INT DECLARE @ActualDateDATETIME DECLARE @FirstDateDATETIME SET @Counter = 1 SET @FirstDate = '1/1/1900' SET @ActualDate = @FirstDate WHILE @Counter < 43830 BEGIN INSERT INTO Calendar(ActualDate) values(@ActualDate) SET @ActualDate = DATEADD(day, @Counter, @FirstDate) SET @Counter = @Counter + 1 END
Can anyone tell me as to how I can Timeout a transaction. For example I have transactiopn that pulls in data from a remote source. So if the time of extraction exceeds sometime say 1hr..I need to rollback the transaction.
Cannot use Set Lock_Time out because it can be used only for timing out a waiting process. Here I want to timeout the executing process
Hi. I'm new to SQL Server programming. I'm using it at my new job for the first time and catching on quickly. I've run into a problem where I run a request via interactive query and it times out. It's really annoying because it seems to happy a lot. Is this just a memory issue with my machine (it has 2.8 GB of RAM) or there a way around it?
Hi all,i have 97 honda CR-V with about 100,000 KM on it. i checked a doc onHonda web site and it said that 60,000 miles is point to change timingbelt. compared with other Honda cars, it is pretty low. is it correct? ifyes, do you know the reason??thanks for your help,jj
I wrote a query using the query analizer and tested it before turning it into a Stored Procedure. It worked fine an the execution time was acceptable (25 secs, since there was a lot of data to analize)
When I executed the recently created stored procedure, the execution time happened to be three or four times higher. (1 min, 38 secs)
It was the exact same code, i was logged in the same database server, the parameters were the same in btoh cases. So, my question is as follows:
Why is it that executing a script and executing a stored procedure with the exact same script differ so much in timing?
Hi,I am getting error when I try to call a stored procedure from another. I would appreciate if someone could give some example.My first Stored Procedure has the following input output parameters:ALTER PROCEDURE dbo.FixedCharges @InvoiceNo int,@InvoiceDate smalldatetime,@TotalOut decimal(8,2) outputAS .... I have tried using the following statement to call it from another stored procedure within the same SQLExpress database. It is giving me error near CALL.CALL FixedCharges (@InvoiceNo,@InvoiceDate,@TotalOut )Many thanks in advanceJames
I have a store procedure (e.g. sp_FetchOpenItems) in which I would like to call an existing stored procedure (e.g. sp_FetchAnalysts). The stored proc, sp_FetchAnalysts returns a resultset of all analysts in the system. I would like to call sp_FetchAnalysts from within sp_FetchOpenItems and insert the resultset from sp_FetchAnalysts into a local temporary table. Is this possible? Thanks, Kevin
IF (@i_WildCardFlag=0)BEGIN SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (Batch.BatchID = @V_BatchID )) AND ((@V_UserID IS NULL) OR (Batch.Created_By = @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 ' if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end END ELSEBEGIN SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (isnull (Batch.BatchID, '''') LIKE @SSS )) AND ((@V_UserID IS NULL) OR (isnull (Batch.Created_By , '''') LIKE @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 ' if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end END PRINT @SQLString SET @ParmDefinition = N' @V_BatchStatus Varchar(30), @V_BatchType VARCHAR(50), @V_BatchID NUMERIC(9), @V_UserID CHAR(8), @V_FromDateTime DATETIME , @V_ToDateTime DATETIME, @SSS varchar(500)' EXECUTE sp_executesql @SQLString, @ParmDefinition, @V_BatchStatus , @V_BatchType , @V_BatchID, @V_UserID , @V_FromDateTime , @V_ToDateTime , @SSS GO SET QUOTED_IDENTIFIER OFF GOSET ANSI_NULLS ON GO
The above stored procedure is related to a search screen where in User is able to search from a variety of fields that include userID (corresponding column Batch.Created_By) and batchID (corresponding column Batch.BatchID). The column UserID is a varchar whereas batchID is a numeric. REQUIREMENT: The stored procedure should cater to a typical search where any of the fields can be entered. meanwhile it also should be able to do a partial search on BatchID and UserID.
I have a stored procedure that among other things needs to get a total of hours worked. These hours are totaled by another stored procedure already. I would like to call the totaling stored procedure once for each user which required a loop sort of thing for each user name in a temporary table (already done) total = result from execute totaling stored procedure Can you help with this Thanks
IF @@ERROR = 0 BEGIN -- Success. Commit the transaction. Commit Tran END ELSE Rollback Tran
return GO
now the problem is, when i execute the stored procedure's inside the main stored procedure, and these sub sp's has an error on it, the main stored procedure doesnt rollback the transation.
now i can put the "begin transation" in the two sub stored procedure's. The problem is
what if the first "SP_Sub_One" executed successfully, and there was error in "SP_Sub_Two"
now the "SP_Sub_One" has been executed and i cant rollback it... the error occured in the "SP_Sub_Two" stored procedure ... so it wont run ... so there will be error in the data
how can i make a mian "BEGIN TRANSACTION" , that even it include the execution of stored procedure in it.
When I am trying to call a function I made from a stored procedure of my creation as well I am getting:
Running [dbo].[DeleteSetByTime].
Cannot find either column "dbo" or the user-defined function or aggregate "dbo.TTLValue", or the name is ambiguous.
No rows affected.
(0 row(s) returned)
@RETURN_VALUE =
Finished running [dbo].[DeleteSetByTime].
This is my function:
ALTER FUNCTION dbo.TTLValue
(
)
RETURNS TABLE
AS
RETURN SELECT Settings.TTL FROM Settings WHERE Enabled='true'
This is my stored procedure:
ALTER PROCEDURE dbo.DeleteSetByTime
AS
BEGIN
SET NOCOUNT ON
DECLARE @TTL int
SET @TTL = dbo.TTLValue()
DELETE FROM SetValues WHERE CreatedTime > dateadd(minute, @TTL, CreatedTime)
END
CreatedTime is a datetime column and TTL is an integer column.
I tried calling it by dbo.TTLValue(), dbo.MyDatabase.TTLValue(), [dbo].[MyDatabase].[TTLValue]() and TTLValue(). The last returned an error when saving it "'TTLValue' is not a recognized built-in function name". Can anybody tell me how to call this function from my stored procedure? Also, if anybody knows of a good book or site with tutorials on how to become a pro in T-SQL I will appreciate it.
Hello, I am hoping there is a solution within SQL that work for this instead of making round trips from the front end. I have a stored procedure that is called from the front-end(USP_DistinctBalancePoolByCompanyCurrency) that accepts two parameters and returns one column of data possibly several rows. I have a second stored procedure(USP_BalanceDateByAccountPool) that accepts the previous stored procedures return values. What I would like to do is call the first stored procedure from the front end and return the results from the second stored procedure. Since it's likely I will have more than row of data, can I loop the second passing each value returned from the first? The Stored Procs are: CREATE PROCEDURE USP_DistinctBalancePoolByCompanyCurrency @CID int, @CY char(3) AS SELECT Distinct S.BalancePoolName FROM SiteRef S INNER JOIN Account A ON A.PoolId=S.ID Inner JOIN AccountBalance AB ON A.Id = AB.AccountId Inner JOIN AccountPool AP On AP.Id=A.PoolId Where A.CompanyId=@CID And AB.Currency=@CY
CREATE PROCEDURE USP_BalanceDateByAccountPool @PoolName varchar(50) AS Declare @DT datetime Select @DT= (Select MAX(AccountBalance.DateX) From Company Company INNER JOIN Account Account ON Company.Id = Account.CompanyId INNER JOIN SiteRef SiteRef ON Account.PoolId = SiteRef.ID Inner JOIN AccountBalance AccountBalance ON Account.Id = AccountBalance.AccountId WHERE SiteRef.BalancePoolName = @PoolName) SELECT SiteRef.BalancePoolName, AccountBalance.DateX, AccountBalance.Balance FROM Company Company INNER JOIN Account Account ON Company.Id = Account.CompanyId INNER JOIN SiteRef SiteRef ON Account.PoolId = SiteRef.ID Inner JOIN AccountBalance AccountBalance ON Account.Id = AccountBalance.AccountId WHERE SiteRef.BalancePoolName = @PoolName And AccountBalance.DateX = @DT Order By AccountBalance.DateX DESC
Any assistance would be greatly appreciated. Thank you, Dave
I am creating an index on a table wit 35 million records but I get the error 'TT_ObjPerformance' table- Unable to create index 'IX_TT_ObjPerformance_CACode'. Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. How can I get the index created? ThanksSQL Server newbie
