COM Object With CLSID {10020200-EB1C-11CF-AE6E-00AA004A34D5} Is Either Not Valid Or Not Registered
Oct 22, 2006
Hello,
I have a asp.net application that calls a DTS package. This application is running fine on my machine (where SQL Server and Web Server are running). When I moved the application to a Web Server (where SQL Server is not installed), I am getting the following error due to the DTS package.
COM object with CLSID {10020200-EB1C-11CF-AE6E-00AA004A34D5} is either not valid or not registered.
I tried every thing I could find on the web but with no luck.
Can someone please help me?
Many thanks in advance for your help.
View 3 Replies
ADVERTISEMENT
Jun 12, 2006
Under sql 2000 I needed to register my sql server before I could begin working with it under Enterprise Manager. Under sql 2005 I usually setup the server under "Object explorer" and work with it from there. So what does registering a server under sql 20005 do? Why is it needed?
TIA,
barkingdog
View 4 Replies
View Related
Jan 31, 2007
I have a small VB.Net 2005 app using the Microsoft.SQLServer.ManagedDTS.dll so I can use the SSIS/DTSx functionality.
The program ran fine in the IDE.
Then when I tried to create a setup project for it I recieved a warning that all dependancies for MSXML6.DLL were not found.
I clicked ok and the setup was created.
I tried to run the setup and it failed with "....msxml6.dll failed to register. HRESULT -2147023782. ...
So I said cancel the setup and registered msxml6.dll.
I deleted my setup project and recreated it. This time I did not get the warning about msxml6.dll dependancies.
I tried the setup again and it executed without any errors however when I run the program I now get:
"Cannot create an instance of the XML Document Object Model. MSXML may not be registered."
So I went back into the IDE with the project and now it will not run either. IT gets the same error.
Does anyone have any suggestions?
View 3 Replies
View Related
Feb 9, 2006
Hello,
We are getting this error when a user clients any report. they can see the directories OK, but when we upload a new report the error still happens.
Error is "Operation is not valid due to the current state of the object."
Any ideas?
Thanks
Michael
View 2 Replies
View Related
Mar 25, 2008
Good morning,
I have created a very simple report that works correctly when in Report Designer Preview mode. When I deploy to the report server it reports that deployment was successful. When I log into Report Manager the report is visible, but when I click on it I end up at an error page.
The error that I get is:
Operation is not valid due to the current state of the object.
Appreciate any help on this.
Thanks
Stuart
View 2 Replies
View Related
Nov 23, 2007
Greetings!
I come before you seeking assistance on a package that basically flows very much like the "Table Driven foreach Loops" example provided by Kirk Haselden at http://sqljunkies.com/WebLog/knight_reign/archive/2005/03/25/9588.aspx
I am presently encountering the following exception:
SSIS package "DW.CUST_CNCL_ORDhardcodedate (1).dtsx" starting.
Error: 0x3 at Shred the contents of the variable: Variable "User::FullResultSet" does not contain a valid data object
Warning: 0x80019002 at Shred the contents of the variable: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Warning: 0x80019002 at DW CUST_CNCL_ORDhardcodedate: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "DW.CUST_CNCL_ORDhardcodedate (1).dtsx" finished: Failure.
Does anyone in the community have any ideas as to what may be the cause of this exception?
I look forward to your reply. Thank you and Grand weekend to you and a very Blessed Thanksgiving.
Thanks,
Carlos
View 32 Replies
View Related
Oct 21, 2015
I want to create subscription for a report.
While creating it gives error "Operation is not valid due to the current state of the object".
I am able to create subscription for other reports deployed. But it gives error for subscription of a particular report.
Tried deploying the report with other name then too it does not allow me to create subscription.
View 3 Replies
View Related
Nov 29, 2007
Hi all
i have an Embedded Visual C++ aplication, in this aplication
exist a class where have declare the const CLSID_SQLSERVERCE_2_0
for create instance OLE DB for SQL CE 2.0
CLSID_SQLSERVERCE_2_0 = {0x76A85B2E,0x9DE0,0x4ded,{0x8E,0x69,0x4D,0xEF,0xDB,0x9C,0x09,0x17}};
i found CLSID for SQL CE 3.0
CLSID_SQLSERVERCE_3_0 = {0x32ce2952, 0x2585, 0x49a6, {0xae, 0xff, 0x17, 0x32, 0x7, 0x6c, 0x29, 0x45}};
But i need CLSID for SQL CE 3.5
CLSID_SQLSERVERCE_3_5 = ??????
sorry my bad english
thanks
View 3 Replies
View Related
Aug 25, 2006
How do I get the CLSID for SQL Server 2005 OLEDB Provider? The following code yields the CLSID for 2000 Provider
m_hr = CLSIDFromProgID(L"SQLOLEDB",&clsid); // SQL Server
Thanks
JEK
View 3 Replies
View Related
Jul 7, 2010
Since installing the client tools for SQL 08 R2 on my laptop, I am running into the following error when trying to open a step within a SQL job:
Microsoft SQL Server Management Studio
Â
Creating an instance of the COM component with CLSID {AA40D1D6-CAEF-4A56-B9BB-D0D3DC976BA2} from the IClassFactory failed due to the following error: c001f011. (Microsoft.SqlServer.ManagedDTS)
ADDITIONAL INFORMATION:
Â
Creating an instance of the COM component with CLSID {AA40D1D6-CAEF-4A56-B9BB-D0D3DC976BA2} from the IClassFactory failed due to the following error: c001f011. (Microsoft.SqlServer.ManagedDTS)
Â
Is there a patch out for this?
View 8 Replies
View Related
Apr 10, 2008
Hi
I am facing a problem with Bussiness Intelligence Development Studio of SQL server 2005 developer edition.
I have SQL 2005 Developer Edition in my machine which has Microsoft Windows XP professional as Operating system and I don€™t have admin rights. I am getting error as given below when trying to launch the connection manager dialogue box from the IDE to add a new connection manager or to edit the existing connection manager in a SSIS package
Error code
TITLE: Microsoft Visual Studio
------------------------------
Creating an instance of the COM component with CLSID {C8B522D0-5CF3-11CE-ADE5-00AA0044773D} from the IClassFactory failed due to the following error: 80070005.
------------------------------
BUTTONS:
OK
------------------------------
The CLSID {C8B522D0-5CF3-11CE-ADE5-00AA0044773D} refers to Oledb32.dll in the registry.
With Admin access i am able to launch the connection manager dialogue box to add a new connection manager. But i need to open the dialogue box without Admin access.
Note : I am able to launch the new connection manager window from Bussiness Intelligence Development Studio of SQL server 2005 Express edition with out admin privileges.
Thanks in Advance
Regards
Malarvannan.D
View 1 Replies
View Related
Mar 6, 2008
Hello Chaps,
I am using vb.net 2005 and SQL Server 2005.. I have deployed some of my packages on the server.. Now if i am trying execute packages with SSIS object model from any of developement PC they are executing perfectly. But as soon as i am trying to execute them from client pc - where no any component except (.netframwork) -- i am getting the follwoing error:
Retrieving the COM class factory for component with CLSID {E44847F1-FD8C-4251-B5DA-B04BB22E236E}
Can any one help me out..? i have gone through some of the article stating that SQL client componet must be installed on the computer from where app runs...
Is there any other solution to use SSIS object model...
Let me know if any one you have...!
Thanks,
Tarang Pandya
View 4 Replies
View Related
Oct 11, 2006
Hi There,This is related to a ms access database but since I use the SqlDataSource control I thought I should post here.I have a project that I was working on with this ms access db and using sql controls, everything was working just finesince one day I started getting "Object reference not set to an instance of an object" messages when I try to designa query or retrieve a schema, nothing works at design time anymore but at runtime everything is perfect, its a lotof work for me now to create columns,schemas and everything manually, I've tried reinstalling visualstudio, ado componentsbut nothing seems to fix it, did this ever happen to any of you guys?any tip is really appreciated thanks a lot
View 2 Replies
View Related
Dec 17, 2007
Does any one has any clue for this error ? I did went through a lot of articles on this error but none helped . I am working in Visual studie 2005 and trying to upload image in sql database through a simple form. Here is the code
using System;
using System.Data;
using System.Configuration;
using System.Collections;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using System.Data.SqlClient;
using System.Web.Configuration;
using System.IO;
public partial class Binary_frmUpload : System.Web.UI.Page
{protected void Page_Load(object sender, EventArgs e)
{
}protected void btnUpload_Click(object sender, EventArgs e)
{if (FileUpload.HasFile == false)
{
// No file uploaded!lblUploadDetails.Text = "Please first select a file to upload...";
}
else
{string str1 = FileUpload.PostedFile.FileName;
string str2 = FileUpload.PostedFile.ContentType; string connectionString = WebConfigurationManager.ConnectionStrings["GSGA"].ConnectionString;
//Initialize SQL Server Connection SqlConnection con = new SqlConnection(connectionString);
//Set insert query string qry = "insert into Officers (Picture,PictureType ,PicttureTitle) values(@ImageData, @PictureType, @PictureTitle)";
//Initialize SqlCommand object for insert. SqlCommand cmd = new SqlCommand(qry, con);
//We are passing Original Image Path and Image byte data as sql parameters. cmd.Parameters.Add(new SqlParameter("@PictureTitle", str1));
cmd.Parameters.Add(new SqlParameter("@PictureType", str2));Stream imgStream = FileUpload.PostedFile.InputStream;
int imgLen = FileUpload.PostedFile.ContentLength;byte[] ImageBytes = new byte[imgLen]; cmd.Parameters.Add(new SqlParameter("@ImageData", ImageBytes));
//Open connection and execute insert query.
con.Open();
cmd.ExecuteNonQuery();
con.Close(); //Close form and return to list or images.
}
}
}
Object reference not set to an instance of an object.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.Source Error:
Line 32:
Line 33: string str2 = FileUpload.PostedFile.ContentType;
Line 34: string connectionString = WebConfigurationManager.ConnectionStrings["GSGA"].ConnectionString;
Line 35:
Line 36: //Initialize SQL Server Connection Source File: c:UsersManojDocumentsVisual Studio 2005WebSitesGSGABinaryfrmUpload.aspx.cs Line: 34
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
Binary_frmUpload.btnUpload_Click(Object sender, EventArgs e) in c:UsersManojDocumentsVisual Studio 2005WebSitesGSGABinaryfrmUpload.aspx.cs:34
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
View 2 Replies
View Related
Aug 17, 2007
Hello All
Not sure if this is the right forum to post this question to, so if it's not, please accept my apologies.
I'm working in SQL Server 2005 with a database that was migrated to 2005 from SQL Server 2000. I have to alter a trigger on a table for some functionality changes, and when I modify the trigger and then access it through the application the database is working with, I receive this error:
There was a error in the [stored procedure name] procedure. Error Number: -2147217900 Error Description: [Microsoft][ODBC SQL Server Driver][SQL Server]The definition of object '[trigger name]' has changed since it was compiled.
[stored procedure name] and [trigger name] are where the actual names appear in the message.
I've tried running sp_recompile on the trigger, stored procedure, and table that are associated with this, and nothing works. I have dropped the trigger, which allows the save process to complete (but doesn't perform the required functionality, of course), and then re-created the trigger, but the error message still comes up. The compatibility level for the database is SQL Server 2000 (80) (as it was migrated from SQL Server 2000 as I mentioned above).
Has anyone seen this, and if so, how can I fix it?
Thanks in advance for your help!
Jay
View 4 Replies
View Related
Dec 21, 2006
Help! I have posted this before and I had hoped that the VS2005 SP1 would help my problem. It didn't. My code is shown below. I have dropped a sqlconnection, sqldataadapter and a strongly-typed dataset from the toolbox onto the component designer for my page and written my code. It compiles without any errors but at runtine I receive the system error "Object reference not set to an instance of an object." The error occurs at the first line where the sqldataadapter is mentioned. I have shufflled the code and the error still occurs at first mention of the dataadapter. I have set parameters to a simple string such as "myemail." It hasn't helped. I have used the "Dim" statement as "Dim DaAuthorLogin as System.Data.SqlClient.SqlDataadapter and Dim DaAuthorLogin as New ......) at the start of the private sub generated by the event requiring the data. Nothing helps. Here is my simple code to select data from a sqlserver 2000 database. Why do I continue to get this error?
Partial Class AuthorLogin
Inherits System.Web.UI.Page
Protected WithEvents AuthorInformation As System.Web.UI.Page
#Region " Web Form Designer Generated Code "
'This call is required by the Web Form Designer.
<System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent()
Me.SqlSelectCommand1 = New System.Data.SqlClient.SqlCommand
Me.DaAuthorLogin = New System.Data.SqlClient.SqlDataAdapter
Me.MDData = New System.Data.SqlClient.SqlConnection
Me.DsAuthorLogin = New MedicalDecisions.DsAuthorLogin
CType(Me.DsAuthorLogin, System.ComponentModel.ISupportInitialize).BeginInit()
'
'SqlSelectCommand1
'
Me.SqlSelectCommand1.CommandText = "SELECT AuthorAlias, AuthorEmail, AuthorPassword, LastName, PreferredName" & Global.Microsoft.VisualBasic.ChrW(13) & Global.Microsoft.VisualBasic.ChrW(10) & "FRO" & _
"M T_Author" & Global.Microsoft.VisualBasic.ChrW(13) & Global.Microsoft.VisualBasic.ChrW(10) & "WHERE (AuthorEmail = @AuthorEmail) AND (AuthorPassword =" & _
" @AuthorPassword)"
Me.SqlSelectCommand1.Connection = Me.MDData
Me.SqlSelectCommand1.Parameters.AddRange(New System.Data.SqlClient.SqlParameter() {New System.Data.SqlClient.SqlParameter("@AuthorEmail", System.Data.SqlDbType.NVarChar, 50, "AuthorEmail"), New System.Data.SqlClient.SqlParameter("@AuthorPassword", System.Data.SqlDbType.NVarChar, 50, "AuthorPassword")})
'
'DaAuthorLogin
'
Me.DaAuthorLogin.SelectCommand = Me.SqlSelectCommand1
Me.DaAuthorLogin.TableMappings.AddRange(New System.Data.Common.DataTableMapping() {New System.Data.Common.DataTableMapping("Table", "T_Author", New System.Data.Common.DataColumnMapping() {New System.Data.Common.DataColumnMapping("AuthorAlias", "AuthorAlias"), New System.Data.Common.DataColumnMapping("AuthorEmail", "AuthorEmail"), New System.Data.Common.DataColumnMapping("AuthorPassword", "AuthorPassword"), New System.Data.Common.DataColumnMapping("LastName", "LastName"), New System.Data.Common.DataColumnMapping("PreferredName", "PreferredName")})})
'
'MDData
'
Me.MDData.ConnectionString = "Data Source=CIS1022DAVID;Initial Catalog=CGData;Integrated Security=True;Pooling" & _
"=False"
Me.MDData.FireInfoMessageEventOnUserErrors = False
'
'DsAuthorLogin
'
Me.DsAuthorLogin.DataSetName = "DsAuthorLogin"
Me.DsAuthorLogin.SchemaSerializationMode = System.Data.SchemaSerializationMode.IncludeSchema
CType(Me.DsAuthorLogin, System.ComponentModel.ISupportInitialize).EndInit()
End Sub
Friend WithEvents SqlSelectCommand1 As System.Data.SqlClient.SqlCommand
Friend WithEvents MDData As System.Data.SqlClient.SqlConnection
Friend WithEvents DaAuthorLogin As System.Data.SqlClient.SqlDataAdapter
Friend WithEvents DsAuthorLogin As MedicalDecisions.DsAuthorLogin
'NOTE: The following placeholder declaration is required by the Web Form Designer.
'Do not delete or move it.
Private designerPlaceholderDeclaration As System.Object
Private Sub Page_Init(ByVal sender As System.Object, ByVal e As System.EventArgs)
'CODEGEN: This method call is required by the Web Form Designer
'Do not modify it using the code editor.
InitializeComponent()
End Sub
#End Region
Private Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs)
'no code here
End Sub
Private Sub AuthorLoginRegister_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles AuthorLoginRegister.Click
'for new author registration
Response.Redirect("AuthorInformation.aspx")
End Sub
Private Sub AuthorLoginBack_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles AuthorLoginBack.Click
'to navigate back
Response.Redirect("MainPaths.aspx")
End Sub
Protected Sub AuthorLoginPassword_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles AuthorLoginPassword.TextChanged
'pass the parameters to the dataadapter and return dataset
DaAuthorLogin.SelectCommand.Parameters("@AuthorEmail").Value = AuthorLoginEmail.Text
DaAuthorLogin.SelectCommand.Parameters("@AuthorPassword").Value = AuthorLoginPassword.Text
MDData.Open()
DaAuthorLogin.Fill(DsAuthorLogin, "T_Author")
MDData.Close()
'set session objects
If DsAuthorLogin.T_Author.Rows.Count > 0 Then
Session("AuthorAlias") = DsAuthorLogin.T_Author(0).AuthorAlias
Session("LastName") = DsAuthorLogin.T_Author(0).LastName
Session("PreferredName") = DsAuthorLogin.T_Author(0).PreferredName
Response.Redirect("AuthorPaths.aspx")
Else : AuthorLoginNotValid.Visible = True
AuthorLoginEmail.Text = ""
AuthorLoginPassword.Text = ""
End If
End Sub
End Class
Thanks in advance,
David
View 2 Replies
View Related
Sep 12, 2006
Anyone know what this error means and how to get rid of it?
Public Sub Main()
Dim myMessage As Net.Mail.MailMessage
Dim mySmtpClient As Net.Mail.SmtpClient
myMessage.To(20) = New Net.Mail.MailAddress(me@hotmail.com)
myMessage.From = New Net.Mail.MailAddress(someone@microsoft.com)
myMessage.Subject = "as;dlfjsdf"
myMessage.Priority = Net.Mail.MailPriority.High
mySmtpClient = New Net.Mail.SmtpClient("microsoft.com")
mySmtpClient.Send(myMessage)
Dts.TaskResult = Dts.Results.Success
End Sub
Thanks,
View 4 Replies
View Related
Mar 17, 2008
Hi,
I am trying to develop a custom algorithm. I have implemented and tested training methods, however I fail at prediction phase. When I try to run a prediction query against a model created with my algorithm I get:
Executing the query ...
Obtained object of type: Microsoft.AnalysisServices.AdomdClient.AdomdDataReader
COM error: COM error: DMPluginWrapper; Object reference not set to an instance of an object..
Execution complete
I know this is not very descriptive, but I have seen that algorith doesn't even executes my Predict(..) function (I can test this by logging to a text file)
So the problem is this, when I run prediction query DMPluginWrapper gives exception -I think- even before calling my custom method.
As I said it is not a very descriptive message but I hope I have hit a general issue.
Thanks...
View 3 Replies
View Related
Apr 2, 2008
I am trying to send some data back to our as/400 from SQL server. Before I do so I need to delete entries from the table. I have an odbc connection set up and have used it sucessfully in a datareader compoenent but but when I try to use it for a delete SQL task it give me the followign error. what am I doing wrong? I even tried hardcoding in the system name/library name.
Here is my delete sql script
DELETE FROM DSSCNTL Where Companycode = 10
TITLE: SQL Task
------------------------------
Object reference not set to an instance of an object.
------------------------------
BUTTONS:
OK
------------------------------
View 7 Replies
View Related
Feb 15, 2007
When I try and run Report Builder Reports i get this error message "Object reference not set to an instance of an object. "
I can run reports locally but not from Report manager
here is the stack trace info
Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
Microsoft.Reporting.WebForms.WebRequestHelper.GetExceptionForMoreInformationNode(XmlNode moreInfo, XmlNamespaceManager namespaces) +18
Microsoft.Reporting.WebForms.WebRequestHelper.ExceptionFromWebResponse(Exception e) +358
Microsoft.Reporting.WebForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension) +482
Microsoft.Reporting.WebForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension) +958
Microsoft.Reporting.WebForms.ServerReportControlSource.RenderReport(String format, String deviceInfo, NameValueCollection additionalParams, String& mimeType, String& fileExtension) +84
Microsoft.Reporting.WebForms.ExportOperation.PerformOperation(NameValueCollection urlQuery, HttpResponse response) +143
Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context) +75
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +154
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210
View 3 Replies
View Related
May 13, 2015
Getting the following error-message:
OS: Windows Server 2008 R2 Standard
64bit
Office 2010
Power Pivot Tables are fed by Power Query queries.
View 3 Replies
View Related
Apr 8, 2008
Hi Everyone,
Please help me on this issue. I'm a new SSIS User.
I've installed Sql Server 2005 Developer Edition
When I create a new SSIS Project in Business Intelligence Development Studio,
I get the following message:
"Microsoft Visual Studio is unable to load this document: Object reference is not set to an instance of an object".
Error loading 'package.dtsx'bject reference is not set to an instance of an object
When I try to debug the package, I get the below message:
parameter Component(System.Design) is null.
I've uninstalled and installed SS 2005 several times, yet the problem persists.
Please help.
This is the package.dtsx
<?xml version="1.0"?><DTS:Executable xmlnsTS="www.microsoft.com/SqlServer/Dts" DTS:ExecutableType="MSDTS.Package.1"><DTSroperty DTS:Name="PackageFormatVersion">2</DTSroperty><DTSroperty DTS:Name="VersionComments"></DTSroperty><DTSroperty DTS:Name="CreatorName">USkothand1</DTSroperty><DTSroperty DTS:Name="CreatorComputerName">US6051KOTHAND1</DTSroperty><DTSroperty DTS:Name="CreationDate" DTSataType="7">4/8/2008 10:53:39 AM</DTSroperty><DTSroperty DTS:Name="PackageType">5</DTSroperty><DTSroperty DTS:Name="ProtectionLevel">1</DTSroperty><DTSroperty DTS:Name="MaxConcurrentExecutables">-1</DTSroperty><DTSroperty DTS:Name="PackagePriorityClass">0</DTSroperty><DTSroperty DTS:Name="VersionMajor">1</DTSroperty><DTSroperty DTS:Name="VersionMinor">0</DTSroperty><DTSroperty DTS:Name="VersionBuild">0</DTSroperty><DTSroperty DTS:Name="VersionGUID">{FBD98635-EDDE-4F58-9D53-356E8CB653FB}</DTSroperty><DTSroperty DTS:Name="EnableConfig">0</DTSroperty><DTSroperty DTS:Name="CheckpointFileName"></DTSroperty><DTSroperty DTS:Name="SaveCheckpoints">0</DTSroperty><DTSroperty DTS:Name="CheckpointUsage">0</DTSroperty><DTSroperty DTS:Name="SuppressConfigurationWarnings">0</DTSroperty><DTSroperty DTS:Name="ForceExecValue">0</DTSroperty><DTSroperty DTS:Name="ExecValue" DTSataType="3">0</DTSroperty><DTSroperty DTS:Name="ForceExecutionResult">-1</DTSroperty><DTSroperty DTS:Name="Disabled">0</DTSroperty><DTSroperty DTS:Name="FailPackageOnFailure">0</DTSroperty><DTSroperty DTS:Name="FailParentOnFailure">0</DTSroperty><DTSroperty DTS:Name="MaxErrorCount">1</DTSroperty><DTSroperty DTS:Name="ISOLevel">1048576</DTSroperty><DTSroperty DTS:Name="LocaleID">1033</DTSroperty><DTSroperty DTS:Name="TransactionOption">1</DTSroperty><DTSroperty DTS:Name="DelayValidation">0</DTSroperty>
<DTS:LoggingOptions><DTSroperty DTS:Name="LoggingMode">0</DTSroperty><DTSroperty DTS:Name="FilterKind">1</DTSroperty><DTSroperty DTS:Name="EventFilter" DTSataType="8"></DTSroperty></DTS:LoggingOptions><DTSroperty DTS:Name="ObjectName">Package</DTSroperty><DTSroperty DTS:Name="DTSID">{191D188C-EA6E-46D6-A46A-8C9F3C21C321}</DTSroperty><DTSroperty DTS:Name="Description"></DTSroperty><DTSroperty DTS:Name="CreationName">MSDTS.Package.1</DTSroperty><DTSroperty DTS:Name="DisableEventHandlers">0</DTSroperty></DTS:Executable>
Thanks
Best Regards
View 12 Replies
View Related
May 27, 2008
Hi All,
i have a table in MS Access with CandidateId and Image column. Image column is in OLE object format. i need to move this to SQL server 2005 with CandidateId column with integer and candidate Image column to Image datatype.
its very udgent, i need any tool to move this to SQL server 2005 or i need a code to move this table from MS Access to SQL server 2005 in C#.
please do the needfull ASAP. waiting for your reply
with regards
View 1 Replies
View Related
May 22, 2008
Just installed VS 2005 & SQLServer 2005 clients on my workstation. When trying to create a new Integration Services Project and start work in the designer receive the MICROSOFT VISUAL STUDIO 'Object reference not set to an instance of an object.' dialog box with message "Creating project 'Integration Services project1'...project creation failed."
Previously I had SQLServer 2000 client with the little VS tool that came with it installed. Uninstalled these prior to installing the 2005 tools (VS and SQLServer).
I'm not finding any information on corrective action for this error.
Any one have this problem and found the solution?
Thanks,
CLC
View 1 Replies
View Related
Dec 28, 2004
Each time I press submit to insert data into the database I receive the following message. I use the same code on another page and it works fine. Here is the error:
Object reference not set to an instance of an object.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source Error:
Line 125: MyCommand.Parameters("@Balance").Value = txtBalance.Text
Line 126:
Line 127: MyCommand.Connection.Open()
Line 128:
Line 129: Try
Source File: c:inetpubwwwrootCreditRepairCreditor_Default.aspx.vb Line: 127
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
CreditRepair.CreditRepair.Vb.Creditor_Default.btnSaveAdd_Click(Object sender, EventArgs e) in c:inetpubwwwrootCreditRepairCreditor_Default.aspx.vb:127
System.Web.UI.WebControls.Button.OnClick(EventArgs e)
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
System.Web.UI.Page.ProcessRequestMain()
Private Sub btnSave_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSave.Click
If (Page.IsValid) Then
Dim DS As DataSet
Dim MyCommand As SqlCommand
Dim AddAccount As String = "insert into AccountDetails (Account_ID, Report_ID, Balance) values (@Account_ID, @Report_ID, @Balance)"
MyCommand = New SqlCommand(AddAccount, MyConnection)
MyCommand.Parameters.Add(New SqlParameter("@Account_ID", SqlDbType.Char, 50))
MyCommand.Parameters("@Account_ID").Value = txtAccount_ID.Text
MyCommand.Parameters.Add(New SqlParameter("@Report_ID", SqlDbType.Char, 50))
MyCommand.Parameters("@Report_ID").Value = txtReport_ID.Text
MyCommand.Parameters.Add(New SqlParameter("@Balance", SqlDbType.Char, 50))
MyCommand.Parameters("@Balance").Value = txtBalance.Text
MyCommand.Connection.Open()
MyCommand.ExecuteNonQuery()
Response.Redirect("Customer_Details.aspx?SS='CustHeadGrid.Columns[0].Item.lblSS.Text)")
MyCommand.Connection.Close()
End If
View 2 Replies
View Related
Sep 13, 2006
I am trying to execute this code feom Script task while excuting its giving me error that "Object reference not set to an instance of an object." The assemblies Iam referening in this code are there in GAC. Any idea abt this.
Thanks,
Public Sub Main()
Dim remoteUri As String
Dim fireAgain As Boolean
Dim uriVarName As String
Dim fileVarName As String
Dim httpConnection As Microsoft.SqlServer.Dts.Runtime.HttpClientConnection
Dim emptyBytes(0) As Byte
Dim SessionID As String
Dim CusAuth As CustomAuth
Try
' Determine the correct variables to read for URI and filename
uriVarName = "vsReportUri"
fileVarName = "vsReportDownloadFilename"
' create SessionID for use with HD Custom authentication
CusAuth = New CustomAuth(ASCIIEncoding.ASCII.GetBytes(Dts.Variables("in_vsBatchKey").Value.ToString()))
Dts.Variables(uriVarName).Value = Dts.Variables(uriVarName).Value.ToString() + "&" + _
"BeginDate=" + Dts.Variables("in_vsBeginDate").Value.ToString() + "&" + _
"EndDate=" + Dts.Variables("in_vsEndDate").Value.ToString()
Dim request As HttpWebRequest = CType(WebRequest.Create(Dts.Variables(uriVarName).Value.ToString()), HttpWebRequest)
'Set credentials based on the credentials found in the variables
request.Credentials = New NetworkCredential(Dts.Variables("in_vsReportUsername").Value.ToString(), _
Dts.Variables("in_vsReportPassword").Value.ToString(), _
Dts.Variables("in_vsReportDomain").Value.ToString())
'Place the custom authentication session ID in a cookie called BatchSession
request.CookieContainer.Add(New Cookie("BatchSession", CusAuth.GenerateSession("EmailAlertingSSIS"), "/", Dts.Variables("in_vsReportDomain").Value.ToString()))
' Set some reasonable limits on resources used by this request
request.MaximumAutomaticRedirections = 4
request.MaximumResponseHeadersLength = 4
' Prepare to download, write messages indicating download start
Dts.Events.FireInformation(0, String.Empty, String.Format("Downloading '{0}' from '{1}'", _
Dts.Variables(fileVarName).Value.ToString(), Dts.Variables(uriVarName).Value.ToString()), String.Empty, 0, fireAgain)
Dts.Log(String.Format("Downloading '{0}' from '{1}'", Dts.Variables(fileVarName).Value.ToString(), Dts.Variables(uriVarName).Value.ToString()), 0, emptyBytes)
' Download data
Dim response As HttpWebResponse = CType(request.GetResponse(), HttpWebResponse)
' Get the stream associated with the response.
Dim receiveStream As Stream = response.GetResponseStream()
' Pipes the stream to a higher level stream reader with the required encoding format.
Dim readStream As New StreamReader(receiveStream, Encoding.UTF8)
Dim fileStream As New StreamWriter(Dts.Variables(fileVarName).Value.ToString())
fileStream.Write(readStream.ReadToEnd())
fileStream.Flush()
fileStream.Close()
readStream.Close()
fileStream.Dispose()
readStream.Dispose()
'Download the file and report success
Dts.TaskResult = Dts.Results.Success
Catch ex As Exception
' post the error message we got back.
Dts.Events.FireError(0, String.Empty, ex.Message, String.Empty, 0)
Dts.TaskResult = Dts.Results.Failure
End Try
End Sub
View 1 Replies
View Related
Nov 14, 2006
Hi all,
I'm getting this problem 'Object reference not set to an instance of an object.' whenever I try to review a report and I checked the log file and this is what it had
w3wp!ui!1!11/14/2006-10:54:20:: Unhandled exception: System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.Reporting.WebForms.WebRequestHelper.GetExceptionForMoreInformationNode(XmlNode moreInfo, XmlNamespaceManager namespaces)
at Microsoft.Reporting.WebForms.WebRequestHelper.ExceptionFromWebResponse(Exception e)
at Microsoft.Reporting.WebForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
at Microsoft.Reporting.WebForms.ServerReport.GetStyleSheet(String styleSheetName)
at Microsoft.Reporting.WebForms.ReportServerStyleSheetOperation.PerformOperation(NameValueCollection urlQuery, HttpResponse response)
at Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Some previous forums stated checking the webconfig file but the web config file look okay. Is there another way to fix this.
Much Thanks,
Carl
View 3 Replies
View Related
Jan 14, 2008
Hello -
For the life of me I cannot figure out why i'm getting the "Object Refence Not Set To an Instance of An Object" error after I try and create a Report Services project in Business Intelligence Studio. I've followed all of the steps in similar posts such as checking the ReportServer/web.config file but everything checks out.
Does anyone have any other ideas as to how I can get rid of this annoying error and start creating some reports?
Thanks!!!
View 3 Replies
View Related
Dec 27, 2007
Hello,
I've ran into trouble while creating a rather simple transformation script component (one input, one output). The only thing it has to do is test the values coming from it's input rows and set the values of the output rows according to some rules; something like:
Code Block
Public Overrides Sub InputBrowser_ProcessInputRow(ByVal Row As InputBrowserBuffer)
If Row.UserAgent.Contains("MSIE") Then 'test input
Row.BrowserName = "Internet Explorer" 'set output
End If
End Sub
This raises an "Object reference not set to an instance of an object." exception. Commenting out the input (Row.UserAgent) solves the exception, but I actually do need to test the contents of the input row (and by leaving only the output manipulation, the script won't reach it's end, the components remain yellow). What can I do about this?
Thanks in advance!
View 5 Replies
View Related
Feb 18, 2007
Hi, I am deploying my web through a web hosting services which provides SQL database support. I got following errors whenever I try to open my webpage,which never happen when I run my web on the local machine. I have my connection string configured in my web.config as below:
<add name="ArtHouseConnection" connectionString="Server=serveripaddress; Integrated Security=True; Database=arteh3_database;User Id=username;Password=password;" providerName="System.Data.SqlClient"/>
<add name="ASPNETDBConnectionString1" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|ASPNETDB.MDF;Integrated Security=True;User Instance=True" providerName="System.Data.SqlClient"/>
This is the source code where error was generated:
public static class ArtHouseConfiguration
{
//cache connection string
private readonly static string dbConnectionString;
//cache data provider name
private readonly static string dbProviderName;
private readonly static string siteName;
//initialize constructor properties
static ArtHouseConfiguration()
{
dbConnectionString = ConfigurationManager.ConnectionStrings["ArtHouseConnection"].ConnectionString;
dbProviderName = ConfigurationManager.ConnectionStrings["ArtHouseConnection"].ProviderName;
siteName = ConfigurationManager.AppSettings["SiteName"];
}
and finally this is the error mg I got:
Object reference not set to an instance of an object.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.Source Error:
Line 30: static ArtHouseConfiguration()
Line 31: {
Line 32: dbConnectionString = ConfigurationManager.ConnectionStrings["ArtHouseConnection"].ConnectionString;
Line 33: dbProviderName = ConfigurationManager.ConnectionStrings["ArtHouseConnection"].ProviderName;
Line 34:
Source File: d:inetpubvhostsartehouse.orghttpdocsApp_CodeArtHouseConfiguration.cs Line: 32 Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
ArtHouseConfiguration..cctor() in d:inetpubvhostsartehouse.orghttpdocsApp_CodeArtHouseConfiguration.cs:32
[TypeInitializationException: The type initializer for 'ArtHouseConfiguration' threw an exception.]
ArtHouseConfiguration.get_EnableErrorLogEmail() in d:inetpubvhostsartehouse.orghttpdocsApp_CodeArtHouseConfiguration.cs:74
Utilities.LogError(Exception ex) in d:inetpubvhostsartehouse.orghttpdocsApp_CodeUtilities.cs:100
ASP.global_asax.Application_Error(Object sender, EventArgs e) in d:inetpubvhostsartehouse.orghttpdocsGlobal.asax:20
System.EventHandler.Invoke(Object sender, EventArgs e) +0
System.Web.HttpApplication.RaiseOnError() +182
Anyone got any ideas? thank you!
View 2 Replies
View Related
Jan 2, 2008
Hi,
I am using a stored procedure and places the value into a dataset.
But it prompts me an error.
And here is my code:
Dim cmd As New SqlCommand("testProc", mySqlConnection)
cmd.CommandType = CommandType.StoredProcedure
cmd.Parameters.Add("@PrdCode", SqlDbType.VarChar, 50).Value = strBonPrdCode
cmd.Parameters.Add("@keyWord", SqlDbType.VarChar, 250).Value = srchKeyword
cmd.Parameters.Add("@keyWord_Count", SqlDbType.Int).Value = Keyword_count
Dim da As New SqlDataAdapter(cmd)
Dim ds As New DataSet
da.Fill(ds, "Results")
recCount = ds.Tables("Results").Rows.Count
Can you give me a solution to solve this problem. Thanking you in advance.
View 8 Replies
View Related
Jun 17, 2014
I need to get the object type (view, table ...etc) for a synonym base object inside a script. The only place where I see something related to this stored is in column "base_object_name" in sys.synonyms but there I can see only the same with format [database].[user/schema].[name]. After some testing playing with different users without specifying database/schema I think that maybe the object_id must be stored in a another place, my first idea was parent_object_id in sys.synonyms but it isn't stored there.
know if object_id for the base object is stored in any other place ?
View 6 Replies
View Related
Apr 12, 2007
I have successfully implemented forms authentication, that means, I can access it from a web browser, get the login page, add my credentials and log on to Reporting Services.
But now I try to access reporting services Web service from a winforms app, doing something like this:
ReportingService _rs = new ReportingService();
_rs.LogonUser("myUsername", "myPassword", "");
_rs.Url = "http://myServer/ReportServer/ReportService.asmx";
CatalogItem[] items = _rs.ListChildren("/", true);
The first three lines works fine, but he last line (ListChildren) throws a "Object reference not set to an instance of an object" exception. I have enabled remote error and looked in the RS log files, but nowhere I can find where this null-pointer exception occured.
Any idea about where to go from here?
Regards Andreas
View 34 Replies
View Related
