I run SELECT statement with a COMPUTE clause,columns in the select list overrides on aggregate functions in COMPUTE clause.
why was overrided?
how show output COMPUTE clause?
SELECT NUMBER
FROM Table_1
COMPUTE AVG(NUMBER)
Result:
NUMBER
1
56
78
89
56
Thanks,mohsen
I am having a problem with this compute by clause
The statement is a simple select
Select col1, col2 from table1
where <where clause>
order by col1
Compute Sum(col2) by col1
I want the display to show details and group totals.
The error message I keep getting is
Server: Msg 410, Level 16, State 2, Line 1
COMPUTE clause #1 'BY' expression #1 is not in the order by list.
I have previously used the compute clause so I know it should work !!
Ay help will be appreciated - Thank you.
Hi all. How could i get the age of the employees given the birthdate.
table - personalinfo
name birthdate
john 2/15/2004 12:00:00 AM
peter 2/15/2003 12:00:00 AM
jon 2/15/2001 12:00:00 AM
mike 2/15/2000 12:00:00 AM
sam 2/15/2002 12:00:00 AM
Thanks
-Ron-
Is there a way to change the column headings when using a compute? I have the following code:
Select IP_address, Caption1, VendorIcon, InterfaceID, Caption2, InterfaceIcon, In_Maxbps, Out_Maxbps, DateTime1
from #test
WHERE InterfaceID IN('144', '154')
ORDER BY InterfaceID
COMPUTE max(In_Maxbps), max(OUT_maxbps), min(OUT_maxbps), avg(OUT_maxbps)
BY InterfaceID
The compute gives me 2 columns with the heading max. I would like to change those headings.
Thanks.
I have a SQL table that consists of columns A, B and C. I am trying to construct a view consisting of all columns (i.e. A, B, C) and a computed column. This computed column has the following logic:
If B is blank or null then NewColumn = A + ' - ' C
else
NewColumn = A + ' - ' + B
I am just wondering how the SQL statement should look like....
Hi Guys, got a problem.
I am trying to create a table of summarized fees. I was unable to do a Insert command so I settled for an Update command. But I ran into this error msg which I’m not sure how to fix. Can anyone see the problem or is it not even possible to Update and Compute in the same statement? Do I have to do a sub query?
Update FEE_SUMs_20080402
SET LOAN_Num = F.DDLOAN, Fee_Amt = F.DDMFEE
FROM FEE_Recs AS F
INNER JOIN dbo.Addr_20080402 ON
Account_Num = F.DDLOAN
ORDER BY F.DDLOAN
COMPUTE SUM(F.DDMFEE) BY F.DDLOAN
Msg 156, Level 15, State 1, Line 7
Incorrect syntax near the keyword 'ORDER'.
i have this query and would like to have a sum for each column. how can i phrase the compute line please ?
select office as Office
, Sum(Case (role) when 'ebp' then 1 else 0 end) as 'EBP'
, Sum(Case (role) when 'support' then 1 else 0 end) as 'Support'
, Sum(Case (role) when 'Awaiting Disposal' then 1 else 0 end) as 'Awaiting Disposal'
, Sum(Case (role) when 'Interview Room' then 1 else 0 end) as 'Interview Room'
, Sum(Case (role) when 'Sch Drop In' then 1 else 0 end) as 'Sch Drop In'
, Sum(Case (role) when 'Sch CX Staff' then 1 else 0 end) as 'Sch CX Staff'
, Sum(Case (role) when 'Not in Use' then 1 else 0 end) as 'Not in Use'
, Sum(Case (role) when 'Public' then 1 else 0 end) as 'Public'
, Sum(Case (role) when 'IAG' then 1 else 0 end) as 'IAG'
, Sum(Case (role) when 'Delivery' then 1 else 0 end) as 'Delivery'
, Sum(Case (role) when 'NVQ Use' then 1 else 0 end) as 'NVQ Use'
, Sum(Case (role) when 'Hot Swap Spare' then 1 else 0 end) as 'Hot Swap Spare'
, Sum(Case (role) when 'Archived' then 1 else 0 end) as 'Archived'
, Sum(Case (role) when 'Network Infrastructure' then 1 else 0 end) as 'Network Infrastructure'
, Sum(Case (role) when 'Unknown' then 1 else 0 end) as 'Unknown'
, Sum(Case (role) when 'Drop in Centres' then 1 else 0 end) as 'Drop in Centres'
, Sum(Case (role) when 'Training' then 1 else 0 end) as 'Training'
from tempassets2
group by office, role
order by office
any help appreciated.
How to display sql compute sum command their result in amount and qty in report?
I am try this query is successful show the total amount and qty in studio management server and show in screen. But run this query on report is without to show last column of qty and amount, why ?
select
xsodetail.shopcode,xsodetail.memono,xsodetail.txdate,
xsodetail.sku,xsoheader.depositamt,xsopayment.paymentcode,xsopayment.paymentamt,
xsodetail.itemamt,xsodetail.salesqty
from xsoheader
inner join xsodetail on xsoheader.shopcode + xsoheader.memono = xsodetail.shopcode + xsodetail.memono
inner join xsopayment on xsoheader.shopcode + xsoheader.memono = xsopayment.shopcode + xsopayment.memono
where (xsodetail.sku = 'L000254' or xsodetail.sku='L000256') and xsoheader.voidflag='N' and xsodetail.txdate = CONVERT(varchar(100), GETDATE(), 112)
compute sum(xsopayment.paymentamt) , sum(xsodetail.salesqty)
i want this keep query output result but don't want the "compute " this command , because this query cannot run in this dos command directc.exe , Thus, it is have any writing skill , it is possible using of rollup ?
select d.shopcode
,d.memono
,d.txdate
,d.sku
,h.depositamt
[Code] ....
hello guys,
Please bare with my english.
Is there a way to compute for the backup file size of the database.
Example.
DatabaseName
TEST_DB
*in MB
DataSize DataSize_Used DataSize_UnUsed
150.00 81.00 70.00
LogSize LogSize_Used LogSize_UnUsed
30.00 1.00 29.00
When I run a backup for TEST_DB ,
*base on this figure - can we compute the the estimated backup file size for TEST_DB?
Hi,
With reference to http://www.intelligententerprise.com/001020/celko.jhtml?_requestid=235427
I want the "sql stmt" which wud give the lft and rgt col values..
i am reading his book but cant understand :eek: where he explains
wat lft and rgt cols are..
"The root is always (lft,rgt) (1, 2*(Select count(*)from table) and leaft nodes are (lft+1=rgt)" :S
Take the example of a master-detail/parent-child set of tables, say, for example, an order table and order details. The order details table has bit field called "IsShipped". I want the overall order status to be shipped=true when all of the order details have their IsShipped column true. Let's say this is in a stored procedure that returns a result set of orders and whether or not they are completely shipped. How could I achieve this?
View 10 Replies View RelatedI am trying to update fields in my table based on certain critera.
UPDATE tblALMLoans
SET tblALMLoans.NextRepDate = dateadd(YY,5,tblALMLoans.OriginalDate)
do until tblALMLoans.NextRepDate > getdate()
tblALMLoans.NextRepDate = dateadd(YY,1,tblALMLoans.OriginalDate)
loop
FROM tblALMLoans
WHERE (tblALMLoans.RateFlag = 'A');
I know this is no where near what its supposed to look like, but this is in code what I am looking to do.
Any help would be greatly appriciated.
I would like a single SQL to return all employee's total billablecompensation for a year. Their billable rates change throughout the year sounder the employee table (one), there is a compensation table (to many)which has the employee id, effective date, billable hourly rate. So in agiven year calendar year they could have many different (though usually 2 atmost) rates. These rates then have to correspond to and e multiplied bytheir corresponding billable hours from the time sheet table.I know I could create a series of UNIONs and hard code the effective dates,i.e.select from time sheets where employee=john and timesheet.task_date betweenjan 1 and jun 1, compensation.billable rate * timesheet.billable hoursUNIONselect from time sheets where employee=john timesheet.task_date between jun1 and dec 31 compensation.billable_rate * timesheet.billable_hoursI'd have to do that for every employee in a very large SQL.Is there an easier way using straight SQL? If not could it be done with astored procedure?Thanks for any insight.
View 2 Replies View RelatedI have three coloumn in Salary Table
Emp ID, Emp Salary , Sequence
a1 1000 1
a1 2000 2
a1 2000 3
a2 4000 1
a2 5000 2
a2 5000 3
a2 6000 4
Now I have to calculate the count on salary if the previous salary is different then count +1 else is previous salary same then add +0.
so output be
EmpID and Updation in Salary
a1 = 2 and for a2 =3
Can anyone help me with the query or storeprocedure i can achieve this output counting according to previous data.
How can I compute the biweekly periods when a date is passed in as a parameter, for example if the user enters 9/12/2014 I should get:
Friday /2nd half9/12/2014
Saturday9/13/2014
Sunday9/14/2014
Monday9/15/2014
Tuesday9/16/2014
Wednesday9/17/2014
Thursday9/18/2014
Friday/1st half 9/19/2014
Friday/2nd half9/19/2014
Saturday9/20/2014
Sunday9/21/2014
Monday9/22/2014
Tuesday9/23/2014
Wednesday 9/24/2014
Thursday9/25/2014
Friday/1st half 9/26/2014
Hi all
I am busy looking at the WIndows 2003 Comptu Cluster setup (Well I am loading it)
And I am interested to know if any body has run SQL 2005 Enterprise on this platform before ?
I know that Windows Compute Cluster uses a JOB scheduler to run tasks and this can be customised for each task , to allow it to use more resourses or less .
I also know that SQL 2005 is much more capable of running cluster mode with database replication and log file shipping
I want to know is of I load SQL 2005 on a Clustered Compute setup will it handle the SQL jobs, database requests with out the scheduler.
The question might be a bit tricky but any help is appricated
Thanks
Sylvester
i am having problem putting this query to calculate students grade using the condition and legend bellow.
WHEN EXAMS BETWEEN 75 AND 100 THEN 'A'
WHEN EXAMS BETWEEN 70 AND 74 THEN 'AB'
WHEN EXAMS BETWEEN 65 AND 69 THEN 'B'
WHEN EXAMS BETWEEN 60 AND 64 THEN 'BC'
[code]...
Imagine a 5 column dataset with the following fields - Organiser, Date of Invoice, Total Invoice Value, Reimbursements and Service tax charged. Using the PowerPivot, I want to determine the "Growth in Professional fee billed over the previous period" - please note that previous period need not be previous year because a client may be billed after a gap of 1-2 years as well.To compute growth, I first need to determine the absolute value of Professional fee billed over the previous period. This is where I am getting stuck. Since the billing periods for different clients need not be consecutive, I cannot use the SAMEPERIODLASTYEAR function.
In trying to solve the problem, I tried to frame a calculated field formula but could not do so. Therefore, I tried solving it via a calculated column formula in the PowerPivot window. My idea here was to determine the client wise previous financial year for each row and then use this column in a calculated field formula to get my desired result. I am getting an error when I write this formula (see Billing data tab of PowerPivot window).
I have a quite big SQL query which would be nice to be used using UNION betweern two Select and Where clauses. I noticed that if both Select clauses have Where part between UNION other is ignored. How can I prevent this?
I found a article in StackOverflow saying that if UNION has e.g. two Selects with Where conditions other one will not work. [URL] ....
I have installed SQL Server 2014 and I tried to use tricks mentioned in StackOverflow's article but couldn't succeeded.
Any example how to write two Selects with own Where clauses and those Selects are joined with UNION?
Hi, can anyone shed some light on this issue?SELECT Status from lupStatuswith a normal query it returns the correct recordcountSELECT Status from lupStatus GROUP BY Statusbut with a GROUP By clause or DISTINCT clause it return the recordcount= -1
View 3 Replies View RelatedI am working with a vendor on upgrading their application from SQL2K to SQL2K5 and am running into the following.
When on SQL Server 2000 the following statement ran without issue:
UPDATE dbo.Track_ID
SET dbo.Track_ID.Processed = 4 --Regular 1 leg call thats been completed
WHERE Processed = 0 AND LegNum = 1
AND TrackID IN
(
SELECT TrackID
FROM dbo.Track_ID
GROUP BY TrackID
HAVING MAX(LegNum) = 1 AND
TrackID + 'x1' IN
(
SELECT
dbo.Track_ID.TrackID + 'x' + CONVERT(NVARCHAR(2), COUNT(dbo.Track_ID.TrackID))
FROM dbo.Track_ID INNER JOIN dbo.transactions
ON dbo.Track_ID.SM_ID = dbo.transactions.sm_session_id
GROUP BY dbo.Track_ID.TrackID
)
)
Once moved to SQL Server 2005 the statement would not return and showed SOS_SCHEDULER_YIELD to be the waittype when executed. This machine is SP1 and needs to be upgraded to SP2, something that is not going to happen near time.
I changed the SQL to the following, SQL Server now runs it in under a second, but now the app is not functioning correctly. Are the above and the following semantically the same?
UPDATE dbo.Track_ID
SET dbo.Track_ID.Processed = 4 --Regular 1 leg call thats been completed
WHERE Processed = 0 AND LegNum = 1
AND TrackID IN
(
SELECT TrackID
FROM dbo.Track_ID
WHERE TrackID + 'x1' IN
(
SELECT dbo.Track_ID.TrackID + 'x' + CONVERT(NVARCHAR(2), COUNT(dbo.Track_ID.TrackID))
FROM dbo.Track_ID INNER JOIN dbo.transactions
ON dbo.Track_ID.SM_ID = dbo.transactions.sm_session_id
GROUP BY dbo.Track_ID.TrackID
)
GROUP BY TrackID
HAVING MAX(LegNum) = 1
)
2 examples:
1) Rows ordered using textual id rather than numeric id
Code Snippet
select
cast(v.id as nvarchar(2)) id
from
(
select 1 id
union select 2 id
union select 11 id
) v
order by
v.id
Result set is ordered as: 1, 11, 2
I expect: 1,2,11
if renamed or removed alias for "cast(v.id as nvarchar(2))" expression then all works fine.
2) SQL server reject query below with next message
Server: Msg 169, Level 15, State 3, Line 16
A column has been specified more than once in the order by list. Columns in the order by list must be unique.
Code Snippet
select
cast(v.id as nvarchar(2)) id
from
(
select 1 id
union select 2 id
union select 11 id
) v
cross join (
select 1 id
union select 2 id
union select 11 id
) u
order by
v.id
,u.id
Again, if renamed or removed alias for "cast(v.id as nvarchar(2))" expression then all works fine.
It reproducible on
Microsoft SQL Server 2000 - 8.00.2039 (Intel X86) May 3 2005 23:18:38 Copyright (c) 1988-2003 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
and
Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Feb 9 2007 22:47:07 Copyright (c) 1988-2005 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
In both cases database collation is SQL_Latin1_General_CP1251_CS_AS
If I check quieries above on database with SQL_Latin1_General_CP1_CI_AS collation then it works fine again.
Could someone clarify - is it bug or expected behaviour?
I am using web developer 2008, while connecting to I wanted to fetch data from Lotus notes database file, for this i used notesql connector, while connectiong to notes database i am fetting error
ERROR [42000] [Lotus][ODBC Lotus Notes]Table reference has to be a table name or an outer join escape clause in a FROM clause
I have already checked that database & table name are correct, please help me out
How i can fetch the lotus notes data in my asp.net pages.
I am using web developer 2008, while connecting to I wanted to fetch data from Lotus notes database file, for this i used notesql connector, while connectiong to notes database i am fetting error
ERROR [42000] [Lotus][ODBC Lotus Notes]Table reference has to be a table name or an outer join escape clause in a FROM clause
I have already checked that database & table name are correct, please help me out
How i can fetch the lotus notes data in my asp.net pages.
Hi,
What is HAVING clause equivalent in the following oracle query, without the combination of "GROUP BY" clause ?
eg :
SELECT SUM(col1) from test HAVING col2 < 5
SELECT SUM(col1) from test WHERE x=y AND HAVING col2 < 5
I want the equivalent query in MSSQLServer for the above Oracle query.
Also, does the aggregate function in Select column(here the SUM(col1)) affect in anyway the presence of HAVING clause?.
Thanks,
Gopi.
How Can I use Top Clause with GROUP BY clause?
Here is my simple problem.
I have two tables
Categories
Products
I want to know Top 5 Products in CategoryID 1,2,3,4,5
Resultset should contain 25 Rows ( 5 top products from each category )
I hope someone will help me soon.
Its urngent
thanks in advance
regards
Waqas
hi..
i have basic question like
what is differance between conditions put in ON clause and in WHERE clause in JOINS????
see conditions that shown in brown color
select d1.SourceID, d1.PID, d1.SummaryID, d1.EffectiveDate,
d1.Audit, d1.ExpirationDate, d1.Indicator
from[DB1].[dbo].[Implicit] d1 inner join [DB2].[dbo].[Implicit] d2
on d1.SummaryID=d2.SummaryID
AND d1.ListType = d2.ListType
AND (d1.EffectiveDate <= d2.ExpirationDate or d2.ExpirationDate is null)
AND (d1.ExpirationDate >= d2.EffectiveDate or d1.ExpirationDate is null)
whered1.ImplicitID >= d2.ImplicitID AND
(d1.SourceID<>d2.SourceID
OR (d1.SourceID IS NULL AND d2.SourceID IS NOT NULL)
OR (d1.SourceID IS NOT NULL AND d2.SourceID IS NULL)
)
select d1.SourceID, d1.PID, d1.SummaryID, d1.EffectiveDate,
d1.Audit, d1.ExpirationDate, d1.Indicator
from[DB1].[dbo].[Implicit] d1 inner join [DB2].[dbo].[Implicit] d2
on d1.SummaryID=d2.SummaryID
AND d1.ImplicitID = d1.ImplicitIDAND d1.ListType = d2.ListType
AND (d1.EffectiveDate <= d2.ExpirationDate or d2.ExpirationDate is null)
AND (d1.ExpirationDate >= d2.EffectiveDate or d1.ExpirationDate is null)
whered1.ImplicitID >= d2.ImplicitID AND
(d1.SourceID<>d2.SourceID
OR (d1.SourceID IS NULL AND d2.SourceID IS NOT NULL)
OR (d1.SourceID IS NOT NULL AND d2.SourceID IS NULL)
)
another thing...
if we put AND d1.ImplicitID = d1.ImplicitID condition in second query then shall we remove
d1.ImplicitID >= d2.ImplicitID from WHERE clause????
Hi everyone,
I saw some queries where SQL inner join clause and the where clause is used at the same time. I knew that "on" is used instead of the "where" clause. Would anyone please exaplin me why both "where" and "on" clause is used in some sql Select queries ?
Thanks
Example, suppose you have these 2 tables(NOTE: My example is totally different, but I'm simply trying to setupthe a simpler version, so excuse the bad design; not the point here)CarsSold {CarsSoldID int (primary key)MonthID intDealershipID intNumberCarsSold int}Dealership {DealershipID int, (primary key)SalesTax decimal}so you may have many delearships selling cars the same month, and youwanted a report to sum up totals of all dealerships per month.select cs.MonthID,sum(cs.NumberCarsSold) as 'TotalCarsSoldInMonth',sum(cs.NumberCarsSold) * d.SalesTax as 'TotalRevenue'from CarsSold csjoin Dealership d on d.DealershipID = cs.DealershipIDgroup by cs.MonthIDMy question is, is there a way to achieve something like this:select cs.MonthID,sum(cs.NumberCarsSold) as 'TotalCarsSoldInMonth',TotalCarsSoldInMonth * d.SalesTax as 'TotalRevenue'from CarsSold csjoin Dealership d on d.DealershipID = cs.DealershipIDgroup by cs.MonthIDNotice the only difference is the 3rd column in the select. Myparticular query is performing some crazy math and the only way I knowof how to get it to work is to copy and past the logic which isgetting out way out of hand...Thanks,Dave
View 5 Replies View RelatedHey guys, I'm a bit weak when it comes to doing ands and or's. I know what i want, but when I put it into statement, i dont get the results that i want.
I have 3 fields in my where clause. ID, LW, and LWU. The code is as follows:WHERE (LASTVISIT BETWEEN '1 / 1 / 95 12 : 00 : 00 AM' AND '1 / 1 / 06 12 : 00 : 00 AM') AND (ID NOT LIKE '%6%') AND (ID NOT LIKE '%7%') AND (ID NOT LIKE '%8%') AND (LW <> 1) AND (LWU <> 'test') OR (LASTVISIT BETWEEN '1 / 1 / 95 12 : 00 : 00 AM' AND '1 / 1 / 06 12 : 00 : 00 AM') AND (ID IS NULL) AND (LW <> 1) AND (LWU <> 'test')
I have a range of dates that I want to grab, in there I do not want any records where ID has 6,7,8 and I only want records where LW does not equal 1. UP to this point, it works fine. I get all the records that only return these values. However, the moment I add where LWU does not equal 'test'. it does not return the values I want. Furthermore, why can I not put this whole string into one and clause? I never understood why I had to create a second line following OR. the longer this query gets the more I get confused. Any help?
I have an insert statement that reads:
SELECT AppointmentID, PatientNo, PatientSurname, PatientForename, ConsultantName, HospitalName, Date, CONVERT (varchar, Time, 8), AppointmentStatus FROM [Appointment] WHERE ([AppointmentId] = @AppointmentId)
I also need to add another WHERE clause. This clause will mean that if the date is within 14 days of the actual date it will not ba able to be selected need help writing this not sure how to write it
Thanks in advance Mike.
I'm having a heck of time with this where clause. I have a table that contains client addresses, a client can have more than one address. So some of the addresses may be seasonal. I need to return only the current address based on a flag MailTo (bit) and a date range, just the month and day, the start and end are datetime datatypes.
Here is what i have tried:
I would really would like it to work on a range of month and day based on the startdate and enddate fields and the MailTo flag.
The table looks like this;
tblClientAddresses:
Address_ID,Client_ID,Address,Address2,City,State,Zip,Country,AddressType,StartDate,
EndDate,MailTo
WHERE (A.MailTo=1) AND (A.EndDate Is Null OR DatePart(mm,A.Enddate) >= DatePart(mm,GETDATE()) AND DatePart(dd,A.Enddate) >= DatePart(dd,GETDATE()))
Thank you for any help!