COnfiguring Number Of Records Per Page?
Dec 5, 2005Is there a way I can specify how many records per page should be displayed?> This is a very basic functionality that needs to go in the deployment at any cost for us?...any ideas.
View 13 Replies
ADVERTISEMENT
Page Number && Records Number
Jun 20, 20061. how to show page number & total page number in report body?
2. how to show total records number?
Set A Number Of Records Per Page In Reporting Services
Jul 26, 2007
Is it possible to set a page to display only certain number of
records at a time? Like 20 records per page?
thanks a lot
Configuring The Code Page Of A OLEDB Source.
Jun 25, 2007hi,
i have a number of interfaces in which i have used oledb source.
the problem i am facing is oledb source components code page is not configurable now if i want to deploy the interface in a different environment which has a database with a different collation it gives a error that oledb source needs new metadata.
has anybody faced this problem earlier.please give me a solution to this problem ..
thanks in advance.
srikanth
Mirroring :: Any Limit For Configuring Number Of Secondary DB Server
May 7, 2015In log shipping is there any limit for configuring no.of secondary db server???
View 3 Replies View RelatedHow To Set How Many Records Showed In Each Page In View Page?
Dec 12, 2007I want to show more records in each page when i view report
Question is subject above
any idea? thanks
How Do I Get Page Number For DBCC PAGE?
Feb 21, 2006I would like to look at the way my data is stored in the page. I have done this for a long time on Sybase, but I am having trouble with the page number on MS SQLServer 2000. I have a 5 row table. When I select INDID and FIRST from SYSINDEXES, I get
indid first
------ --------------
1 0x370300000100
I have tried all manner of gyrations to put this in to the DBCC PAGE command. No matter how I do it, I get an error saying that page is not part of the database, or the format is wrong. From my searching and reading, I think that this actually a combination number, consisting of the file and page number, but I can't see how to separate it. Any assistance would be appreciated. A link to documentation on internals, such as system table details and page formats would be most helpful. I looked in Ken Henderson's book on architecture and internals, and could not find it.
Or is there a DBCC command that will tell me more about the table, and perhaps give me the page number in decimal? So far, I can only find the checkdb gives that info on errors only.
Thanks for looking at this with me.
Doug W
Hunt Valley, Md
How To Number Records / Duplicates Receiving Same Number
Feb 19, 2013I have a large table of customers. I would like to add a column that contains an integer, unique to that customer. The trick is that this file contains many duplicate customers, so I want the duplicates to all have the same number between them.the numbers dont have to be sequential or anything, just like customers having the same one.
View 8 Replies View RelatedGet Page Number
Dec 19, 2007Hi, I need to get page number of a data row. Does SQL Server 2005 support it? Please help me
Thanks
Report Page Number
Mar 5, 2007Hi all. how make a page number at the buttom of the report. I can't find it in Business Intelligence project.
Thanks.
-Ron-
List Box Page Number
Jul 3, 2007Hello,
I have a matrix inside a list box that groups by "question id" to display matrices with summaries for each question. I have checked the box "Insert page break after this list".
I want to be able to place the list box number next to the question, so that I will see something like:
1. Name
2. Category
3. Age
Is there a way to do this? Can I access the current number within the list? If I try the Globals!PageNumber variable, I get an error saying that the variable can only be used in a header or footer.
Thanks,
Michael
Page Number In Body
Aug 2, 2007how to get page number in body of report
View 9 Replies View RelatedPage Number Issue
Nov 15, 2007
Hello All,
I need some help with a page number issue. I have a report that looks great, and runs like it is supposed to, except I cannot get the page numbers to reset properly. The report can span several document numbers in one query run, and I would like the page number to reset each time a new document number is found in the recordset. Right Now, SSRS does not seem to have this capabiliry, and I am looking for a creative solution.
Example:
What SSRS actual does:
Actual Page Document SSRS Page Display
1 Document 1 1
2 Document 1 2
3 Document 1 3
4 Document 2 4
5 Document 2 5
What I need it to do:
Actual Page Document SSRS Page Display
1 Document 1 1
2 Document 1 2
3 Document 1 3
4 Document 2 1
5 Document 2 2
Any suggestions?
Many thanks in advance!
-Tom
Formating A Number To Show $23.49 From Sql Server Into An Asp Web Page
Feb 10, 2000Hi,
I need to make the format by pulling the number from a table from sql server 7.0 and show the result in a table and have the following format $120,534.45 is that possible.
Thanks
Ali
Hiding A Table Row Depending On Page Number?
Jul 5, 2007Hi, Everyone.
i am wondering if there is some way to hide a table row depending on the page number.
I have tried to find a way to access the global page number to use it in an expression for the visibility property on the table row, but i havent found anything useful.
Reset Total Page Number In A Group
Sep 26, 2006I know how to reset the page numbers with each group, but how do you reset the total page number within each group.
EX. Code for page of total pages
="Page " & Globals.PageNumber & " of " & Globals.TotalPages
EX. Code to reset within a group
Custom Code:
Shared offset as Integer
Shared currentgroup as object
Public Function GetGroupPageNumber(group as Object, pagenumber as Integer) as Object
If not (group = currentgroup)
offset = pagenumber - 1
currentgroup= group
end if
return pagenumber - offset
end function
=Code.GetGroupPageNumber(ReportItems!Category.Value(grouping),Globals!PageNumber)
What I need is code for a combination of the two...to display code for page of total pages that resets within a group.
Any help is greatly appreciated.
Thanks!
How To Limit Number Of Rows Showing Each Page?
Dec 17, 2006Hi All,
i couldn't find how to set up the number of rows displaying on each page?
i wanna each page display 20 rows.
Thanks
Nick
Page Number In ReportExecution2005 - Render Method
Mar 10, 2008Hello,
I am trying to render a Report in HTML4.0 format using ReportExecution2005 web service's Render method. When I use this, I am getting all the results in a single page. I want to display the results page by page as ReportViewer control does. Is there any way to get the total number of pages of the Result using Render() web method?
I tried using the following deviceinfo:
"<DeviceInfo><StreamRoot></StreamRoot><Toolbar>True</Toolbar><Parameters>True</Parameters><Section>0</Section><HTMLFragment>false
</HTMLFragment></DeviceInfo>";
Any help or suggestions would be appreciated.
Extending The Number Of Rows Returned Per Page In RS
Jun 7, 2007Is there a way to extend the number of rows that will be returned so that Reporting services doesn't display such a large number of pages for the users to page through? It would be easier for them to "wheel mouse" through a long page on the screen.
Anyone out there have any thoughts on how this might be accomplished?
Thanks!
Travis
Resetting Page Number On Group Break
Apr 21, 2008
Hi,
I have a report where i do a page break for each supplier. I want to reset my page number to '1' when there is a group break.When i googled for this functionality i found the following chris Hay's blog which provides the solution.
http://blogs.msdn.com/chrishays/archive/2006/01/05/ResetPageNumberOnGroup.aspx
But if i follow the same, I get #Error instead of page number during the run time.How do i resolve the error?
Also, I want to display the "page 1 of totalpages in group" like that. Is that possible?
Thanks in advance
Records On A Page?
Oct 1, 2007I was able to fix this data with no data loss.
However How would I use a restored backup to find the records that were on this particular page?
DATE/TIME:10/1/2007 12:33:36 PM
DESCRIPTION:Error: 823, Severity: 24, State: 2
I/O error (torn page) detected during read at offset 0x00000003aa6000 in file 'K:Program FilesMicrosoft SQL ServerMSSQLDataMC_20070101_2.mdf'.
COMMENT:(None)
JOB RUN:(None)
You can do anything at www.zombo.com
Records Per Page
Jun 14, 2007Hi.
I want to know how many records there are per page.
For example there may be a textbox showing the count of records per page.
What is the expression for this?
Any help would be appreciated.
Counting Total Number Of Queries Executed Within The Page
Aug 25, 2007Hi everyone,Does exist an easy way to count the actually number of queries executed within a page?I've searched here and in google but found anything...Thanks in advance!
View 3 Replies View RelatedRestore Gives 'invalid Logical Page Number' Error
Jun 24, 1999We tried to restore an empty database from a backup and got:
'Load database encountered an invalid logical page number' error.
This then set the database as 'loading'
Anyone got any ideas?
We aren't exactly sure how big the first database was when the backup was done but if the new database isn't big enough to contain the backed up data, wouldn't we get a more meaningful error?
Janet
SQL Server 2008 :: How To Check Page Split Number
May 11, 2015I am working now on optimization of an update query for a particular table and I want to measure the number of page splits after each update. How to check it?
View 6 Replies View RelatedReporting Services :: How To Hide Page Number In SSRS
May 16, 2015How to hide page number based on tablix availability?
I would like to hide all page number once a specific tablix has data!!
How To Make Footers Page Number Appear When I Print The Report
Jan 10, 2007I have the footer with the following in it,
**********************************
= " Page " & Globals!PageNumber & " of " & Globals!TotalPages & " " & String.Format(Globals!ExecutionTime, "dd-MM-yyy uu:mm")
********************************
When i view the report it shows the page number and time, but when i print it does'nt appear at all on the print paper( page number and time)
is there a trick to make it appear on the print.
Thank you very much.
Retrieving Specific Page(number Of Rows) Form Table
Sep 27, 2005hi,
i need SP that receive 2 integers ,@NUM_ROWS and @PAGE_NUMBER,
and return the rows in that page.
for example:
SP(4,2) will return 4 rows in page number 2 .
So if i have table with 9 rows i will get rows 5-8,
the first page is rows 1-4 the second page is 5-8 and the 3 page is row 9.
i have to assume that rows can be deleted form that table.
thanks
Reporting Services :: Table Of Content With Page Number In SSRS
Oct 30, 2015How to creating a Table Of Content with page number in ( SSRS )SQL Server Reporting Services or when exported to pdf report.
FYI, Page number should be there in TOC.
Third party component is not accepted.
Dynamic Document Map will not work, as it cant get the page number.
I understand that there is no buildin feature which support this, but there should be some work around in SSRS or when export to PDF.
Reporting Services :: Report - Change Number Of Rows Per Page
May 29, 2008I am fairly new to reporting services and recently created a simple tabular report. There is one table which queries the database and I would like to change the table so there are more than 25 rows of data per page. How do I do this? Also it would be advantageous to know how to set the report to only create a new page for every different item in a column. E.g., if I have various data for each date, I would like to only create a new page when the date changes so that all data for a specific date is on one page etc etc.
View 13 Replies View RelatedDisplaying Total Number Of Rows In A Report In Page Header.
Jun 20, 2007Hi,
I have requirement to display Total number of Rows in a Report in Page Header.
I have written the following code in Page header it shows RowCount for the Page only.
=Count(ReportItems!textboxInTableCell.Value)
Can anyone please help on this?
Regards
Raghav
SSRS(2005) Print Review && Page Number Reset ?s
Sep 17, 2007Hi,
I'm having 2 issues on my first "real" SSRS report.
1. How to do a print preview via the preview tab. For print rendering, I have no print preview button on the preview toolbar. Is this normal? MS documention said that there is a Print Preview button. (BOL May 2007 - Designing & Creating reports -> working with report designer -> debugging and Publishing reports (Print Preview)) This report will always be rendered via the printer and it is a "pain" to have to always print it to see changes. The print layout option comes up all black with nothing viewable.
2. How do I reset page numbers back to 1 for report groups? I see no option for this. My report group requires a new page and I want page numbering to start at 1 when the grouping changes.
Note: I'm running VS2005 via Vista (with VS2005 Vista fix installed). SQL2005 SP2 also installed.
Any advice on this will be appreciated. I've spent too much time already where this should be obvious.
Controlling Number Of Rows To Display In A Table And Matrix On One Page
Jul 19, 2007Is there a way to control how many Detail Rows are displayed on one page in Table and Matrix controls?
View 1 Replies View Related