CPU Per File Group
Mar 19, 2008SQL SERVER 2005
Hello,
I would like to set each cpu available per each file group.
How can I do?
Thank
ADVERTISEMENT
DB Design :: Partition With Single File Group Or Multiple File Group?
May 19, 2015partition with single file group or multiple file group which one best.
we have some report running from partition table, few reports don't have any partition Key and after creating 400 partition with 400 file group it is slow.what is best practices to crate 400 file group or single file group.
SQL Server Admin 2014 :: Creating Additional Data File For A Particular File Group?
Jul 6, 2015For a database, we have 4 data files in a particular file group and the file sizes are almost 70 GB each.
Do I come across any performance issues if I create/pre-allocate an additional data file in the same file group so that the existing files don't grow too much?
SQL Server Admin 2014 :: Can Delete A Data-file Or File-group
Apr 27, 2015In a server we had File Growth,And then We had to Add New Hard Drive And New File On It.And Now We have New server with a Huge Hard Drive.But all files remaind.Can I Reduce This files to One data file or not ?
View 3 Replies View RelatedSplit The Existing MDF File Into Mutliple Files As A File Group?
Jul 30, 2007I have a huge MDF File - 120 GB File (Had setup as 1 MDF initially) -- Did not anticipate that the DB would grow to that size!!
Anyways.. I heard that the general performance woul grow if i had them as "File Groups"..
Is there anyway - to split the existing MDF file into Mutliple files as a File Group?
Where should i start? Can someone please direct me..
SQL 2012 :: DBCC Shrinkfile Empty File Not Distributing Data Evenly In Primary File Group With Multiple Files
Apr 29, 2014Why shrinkfile empty file does not redistribute data evenly in the primary file group with multiple files:
Please run the script attached to see what the end result is.
This is what I set up last night on my test machine.
1) Create database [FGTest] size 200MB
2) Create table called TEST on primary
3) Insert 40MB of data into test
4) Create another file group called temp in primary size 200MB
5) Shrinkfile('FGTest',emptyfile) so that all data is transfered from FGTest into temp file group.
6) Add another 2 files called DATA2 and DATA3. Both are 200MB.
7) We now have 3 empty files that I want data distributed evenly on. FGTest, DATA2 & DATA3
8) Shrinkfile('temp',emptyfile) to move all the data from temp over the 3 file groups evenly
I would expect at this stage to have the following:
FGTest = 13MB,
DATA2 = 13MB,
DATA3 = 13MB
(40MB of data over 3 files should be about 13 MBish in each file)
What I actually end up with is this:
FGTest = 20MB
DATA1 = 10MB
DATA2 = 10MB
It looks as though SQL Server is allocating 50% of all data to the original file and then 50% evenly over
the remaining files in PRIMARY.
File Group
Nov 5, 2001I have a table which has about 10 million rows, is it possible to
create a seperate file group just for that table?
Reporting Services :: Display Group Name Value Of Each Group In Column Header Outside The Group?
Sep 29, 2015I have an SSRS 2012 table report with groups; each group is broken ie. one group for one page, and there are multiple groups in multiple pages.
'GroupName' column has multiple values - X,Y,Z,......
I need to group 'GroupName' with X,Y,Z,..... ie value X in page 1,value Y in page 2, value Z in page 3...
Now, I need to display another column (ABC) in this table report (outside the group column 'GroupName'); this outside column itself is another column header (not a group header) in the table (report) and it derives its name partly from the 'GroupName' values:
Example:
Value X for GroupName in page 1 will mean, in page 1, column Name of ABC column must be ABC-X Value Y for GroupName in page 2 will mean, in page 2, column Name of ABC column must be ABC-Y Value Z for GroupName in page 3 will mean, in page 3, column Name of
ABC column must be ABC-Z
ie the column name of ABC (Clm ABC) must be dynamic as per the GroupName values (X,Y,Z....)
Page1:
GroupName Clm ABC-X
X
Page2:
GroupName Clm ABC-Y
Y
Page3:
GroupName Clm ABC-Z
Z
I have been able to use First(ReportItems!GroupName.Value) in the Page Header to get GroupNames displayed in each page; I get X in page 1, Y in page 2, Z in page 3.....
However, when I use ReportItems (that refers to a group name) in the Report Body outside the group,
I get the following error:
Report item expressions can only refer to other report items within the same grouping scope or a containing grouping scope
I need to get the X, Y, Z ... in each page for the column ABC.
I have been able to use this - First(Fields!GroupName.Value); however, I get ABC-X, ABC-X, ABC-X in each of the pages for the ABC column, instead of ABC-X in page 1, ABC-Y in page 2, ABC-Z in page 3, ...
File Group Backup
Oct 10, 2001Can you backup individual files within a file group.?
View 1 Replies View RelatedFile Group Backup
Oct 10, 2001Can you backup individual files within a file group.?
View 1 Replies View RelatedFile Group As Variable
Jun 29, 2006Hi Champs!
How can i create a table on an filegroup that comes from a variable?
Using EXECUTE??
the following does not work:
declare @var char
set var = 'filegroup'
Create table table]
...
...
ON [@var]
/Many thanks
Primary File Group Full
Apr 26, 2005Weird. I have an Agent job that populates some warehouse data every night. It's been working fine for over a year. Then it fails with a message that thePRIMARY file group is full. The database is set to Simple recovery, automatic, unrestricted growth by 10% for both the log file and the data file. The drive it's on has 96GB free. The data file is 1.5GB and the log is 2MB and there's not very much fluctuation in the amoutn of data going into it.
Anybody have an idea why that would happen?
Thanks for any insight,Pete
Move SQL Table To Another File Group
Oct 25, 2005Hi, I have huge SQL table (5 mil records), currently it is on primary file group, is there any way to move it to another file group?Thanks.
View 2 Replies View RelatedThe Default File Group Is Full
Jul 13, 2000Hi folks,
I got a message that 'Could not allocate space for object '(SYSTEM table id: -732777483)' in database 'TEMPDB' because the 'DEFAULT' filegroup is full.
Connection Broken'
Can you tell me how to solve this problem?
Thanks in advance.
Mike.
Move Tables To New File Group
Nov 22, 1999Just ran the 6.5 to 7.0 upgrade. It put all tables into a 1 large file. Is there a way to move a single table out of the file and into a second filegroup?
View 1 Replies View RelatedPrimaryt File Group-Urgent
Feb 22, 2001I am to create a new file group?Should it be on Primary file group?What is the advantage of having it on Primary File Group?
Thanks
Jai
How To Confirm File Group Is Currupt
Jul 20, 2004How do we will come to know, whether file group is currupted or not
View 1 Replies View RelatedSQL 2012 :: Restoring Only One File Group?
Feb 27, 2014I have created the file group for my database.First i took backup of individual file group(mdf and ndf) then I tried to restore only secondary(ndf) file group.I got error like
Restore failed for Server 'pcnameSQLEXPRESS'. (Microsoft.SqlServer.SmoExtended)
File 'regSQL_dat' was not backed up in file 1 on device 'D:vtndf.bak'. The file cannot be restored from this backup set.
RESTORE DATABASE is terminating abnormally. (Microsoft SQL Server, Error: 3144)
When i tried to restore only primary file group i got the same error.
Can i restore individual file group? I
For the purpose of data archiveng,i have taken back up of ndf file (it contains very old data) & i have removed this file from database.Now my customer asking these file data.Now i have to again attach/restore this ndf file.how to attach/restore.
SQL 2012 :: Not Able To Drop File Group
Dec 11, 2014I am not able to to drop few file groups that has been created to add partition range.
Steps taken so far:
--Empty files started
DBCC ShrinkFile(YEAR2015_FG,EmptyFile);
GO
--Removing files
Alter DATABASE ETL_MART REMOVE FILEGROUP YEAR2015_FG;
GO
-- Remove parition scheme depednecy
[code]...
Index Moving To A New File Group
May 7, 2008I have a requirement for moving all the non-clustered indexes to a new file group. Does anyone have a script for this?
Thanks.
------------------------
I think, therefore I am - Rene Descartes
Partition Function And File Group
May 16, 2008Am I correct in assuming, in partitioning scenarion - the NUMBER OF PARAMETERS in a partitioning function is equal to number of file groups?
------------------------
I think, therefore I am - Rene Descartes
Moving Table To New File Group
Oct 17, 2007Hi all
I have a table called ACTIVATION_CONSUMPTION which is in PRIMARY file group, in order to move this table to new file group [FG_ACTV], I have done the following
1. ALTER DATABASE [MYDB] ADD FILEGROUP [FG_ACTV] (i have not attached a file to this file group)
2. IF EXISTS (SELECT * FROM sys.indexes WHERE object_id = OBJECT_ID(N'[dbo].[ACTIVATION_CONSUMPTION]') AND name = N'ACTIVATION_CONSUMPTION_PK')
ALTER TABLE [dbo].[ACTIVATION_CONSUMPTION] DROP CONSTRAINT [ACTIVATION_CONSUMPTION_PK]
GO
3.ALTER TABLE [dbo].[ACTIVATION_CONSUMPTION] ADD CONSTRAINT [ACTIVATION_CONSUMPTION_PK] PRIMARY KEY CLUSTERED
(
[ACTIVATION_CONSUMPTION_ID] ASC
)WITH (PAD_INDEX = OFF, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = OFF, ONLINE = OFF) ON [FG_ACTV]
The above command executed successfully and now the table is in new file group [FG_ACTV]
My question is how come the table was moved to new file group though it has no files attached to it?
Thanks in advance.
Primary File Group Is Full
Jan 7, 2008Primary file group is full for one user db
This is production server
Total db size is 132186 MB
data file is 12000 MB, set automatically grow
and restrict file growth is 121024 MB
Now there is 30 GB space on drive
I have added space to file 3 times(1GB, 10GB, 3 GB) and incresed restrict file growth also(5GB). database is in simple recovery mode.
stille I am getting above error, pleasee let me know how to proceed now?
Create Indexes - Own File Group
Mar 12, 2007With help of others on this group, I've been learning and researchingabout indexes; an area I neglected.I see I can specify which filegroup I wish to create an index, whichthe default is Primary.I have more than one drive in my SQL server where I put data and logson their own logical raid groups.My databases are SIMPLE, so they dont use much, if any logs (none as Iunderstand).I was thinking of adding an additional file to my database and use itsolely for the indexes.Any thoughts?SQL Server 2005 Enterprise x64 SP28 disk SAS Raid 1+0 w/ 512mb ram w/ battery backup.Thanks,Rob
View 2 Replies View RelatedFile Group Space Error
Jul 20, 2005Hi,Received the following error during index creation of the tables. Thedata & log files are set to 'unrestricted growth' and enough spaceavailable on the disk. Any reasons?___________Microsoft OLE DB Provider for SQL Server (80040e14): Could not allocatenew page for database 'Ultimareports'. There are no more pages availablein filegroup PRIMARY. Space can be created by dropping objects, addingadditional files, or allowing file growth___________ThanksJohn Jayaseelan*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedPRIMARY File Group Is Full
Jul 20, 2005Hi there,I've just run some DTS packages on my test sqlserver (Which has limitedhard disk space and memory) and all the tasks have failed, due to'PRIMARY' file group is fullIs there a query or script I can run to resolve this problem??M3ckon*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedPrimary File Group Is Full
Jan 8, 2008Primary file group is full for one user db
This is production server
Total db size is 132186 MB
data file is 12000 MB, set automatically grow
and restrict file growth is 121024 MB
Now there is 30 GB space on drive
I have added space to file 3 times(1GB, 10GB, 3 GB) and incresed restrict file growth also(5GB). database is in simple recovery mode.
stille I am getting above error, pleasee let me know how to proceed now?
Replication To The Non Default File Group
Apr 25, 2007Hi,
I have a snapshot replication set up on a SQL 2K Server publishing to other SQL 2K servers. The publisher database has mutliple file groups - which is structured the same as the subscriber databases. The snapshot has been set to delete and recreate the tables on the subscribers - this is a performance decision as the tables are large and this is the better approach. The tables reside in their own file groups (but not the default). I want the replication agents to recreate these tables in the original file groups and not the default.
Is there a method within Replication to specify which file group to recreate the table in so it doesn't fill up the default file group?
Thanks in advance,
Pete
File Group Is Running Out Of Space?
Jul 21, 2015I am currently SQL admin since our ordinary SQL folks are at summer vacation.
Yesterday SCOM alerted that File Group is running out of space on one not so critical database "The file group "PRIMARY" for the database "loganalys" in SQL instance "MSSQLSERVER" on computer "sqlserver2" is running out of space".
I logged in to the SQL server and checked the database in question. It is a very large DB with a size of 577 GB.The storage on which the database files resides has 123 GB free space so that isn't the issue.
The database is set to autogrowth 1 MB at a time (unrestricted) so that doesn't seem to be the issue either.However, in the database properties under General, it says Space avaliable: 570 MB.
I guess that this may be the issue, that this is under some treshold for SCOM to alert on.I have looked at the other databases and they have everything between 0,25MB to 270MB space avaliable (they are all set to autogrowth 1 MB, unrestricted).
I am not sure what this means and if I have to do something about it?
Primary File Group Is Full
Dec 20, 2007
I got below error :
Could not find allocate space for object 'tablename' in DB, because the primary file group is full
Upon investigation I found :
datafile is reached it's maximum size
DB Size space allowcated 197 MB, space free 20.69 MB
DB mdf 194880 KB, ndf 6272 KB
It's production server, please let me know how to proceed now?
File Group Free Space--urgent
May 23, 2000Hi,
In sql 7.0 , i would like to create a database with the size of 10Gb, in my server couple of databases already exist.
How do i know how much free space is there in File group.
we are having only one file group i.e PRIMARY.
Could anyone pls tell me about this.
Thank u.
--kavira
Restore File Group At Certain Point Of Time
Aug 11, 1999How could i restore a filegroup to a certain point of time (not to apply all
transaction log up to the latest one) ??
How To Migrate Existing Indexes To A Different File Group?
Apr 21, 2003Is there any utility to migrate the existing indexes on default filegroup to a new user defined file group? The only way that I know is to delete the index and recreate with new filegroup.
How about for table? Is there any utility for migrating the existing tables to a different filegroup? The only way that I know is to create a clustered index on the new filegroup which will move the table to the new filegroup. If a clustered index exists then drop the clustered index and recreate it with the new filegroup
I am looking for an existing utility which would do the above?
Any help is appreciated.
Thanx in advance.