Calculate Value Based On Other Values For Use In SRS Report

Mar 10, 2008



I am trying to create a report in SRS that will calculate a Composite Score based on the Sum of other scores and then that Sum is divided by 12.


Here is a copy of the Query I have created to calculate the numbers I want to use, but when I create the expression in SRS the calculations don't come out correctly. The expression that I use in SRS is at the bottom of the Script.

Thanks in Advance


--6 Trait_03052008.sql

--Pull test scores for 6 Trait out of Campus for SRS reports.

SELECT s.lastname+','+' '+s.firstname AS Student, e.grade, sm.lastname+','+' '+sm.firstname AS Teacher, sc.name AS School,

t.name AS Test, t.code, ts.rawscore,

CASE WHEN t.name = '1 Ideas' AND ts.rawscore IS NOT NULL THEN CAST(ts.rawscore * 3 AS Numeric)END AS IComp,

CASE WHEN t.name = '2 Organization' AND ts.rawscore IS NOT NULL THEN CAST(ts.rawscore * 3 AS Numeric) END AS OComp,

CASE WHEN t.name = '3 Voice' AND ts.rawscore IS NOT NULL THEN CAST(ts.rawscore * 2 AS Numeric)END AS VComp,

CASE WHEN t.name = '4 Word Choice' AND ts.rawscore IS NOT NULL THEN CAST(ts.rawscore * 2 AS Numeric)END AS WComp,

CASE WHEN t.name = '5 Sentence Fluency' AND ts.rawscore IS NOT NULL THEN CAST(ts.rawscore AS Numeric) END AS SComp,

CASE WHEN t.name = '6 Conventions' AND ts.rawscore IS NOT NULL THEN CAST(ts.rawscore AS Numeric)END AS CComp

FROM testscore ts

JOIN student s ON s.personid = ts.personid

JOIN roster r ON r.personid = s.personid

JOIN test t ON t.testid = ts.testid

JOIN calendar ca ON ca.calendarid = s.calendarid

JOIN enrollment e ON e.enrollmentid = s.enrollmentid and e.calendarid = ca.calendarid

JOIN section se ON se.sectionid = r.sectionid

JOIN course c ON c.courseid = se.courseid AND c.calendarid = ca.calendarid

JOIN school sc ON sc.schoolid = s.schoolid

JOIN staffmember sm ON sm.personid = se.teacherpersonid AND sm.schoolid = ca.schoolid

WHERE t.code LIKE '6%' AND c.calendarid =50 AND c.homeroom = 1

GROUP BY s.lastName,s.firstName,e.grade,sm.lastName,sm.firstName,sc.name,t.name,t.code,ts.rawScore

ORDER BY [Student], t.code, t.name DESC


Expression being used in SRS to calculate the Composite Score.

=SUM(Fields!IComp.Value)+(Fields!OComp.Value)+(Fields!VComp.Value)+(Fields!WComp.Value)+(Fields!SComp.Value)+(Fields!CComp.Value)/12

View 4 Replies


ADVERTISEMENT

SQL 2012 :: Produce Report To Calculate No Of Days Based On User Input Start And End Date

Jan 5, 2015

I have to produce a report to calculate no of days based on user input start date and end date.

say for eg: in the tables I have emp name
user 'Phani' started work from - EStart 20/11/2014EEnd 10/01/2015 - total days --datediff
within his work period he did different roles:

PhaniMarketing (prSt Date) 20/11/2014prE date (28/11/2014) Total 9 days
PhaniAdmin (prSt Date) 29/11/2014prE date (20/12/2014) Total 22 days
PhaniCRM (prSt Date) 20/12/2014prE date (10/01/2015) Total 22 days
Total days 53 Days
for this :

[code]...

HOW CAN I USE Case statement to calculate days for given start date and end date. I have to include all three totals, 1 for Job dates, 2, subjobs dates, 3 cal of days for a requested period.

View 0 Replies View Related

Reporting Services :: How To Calculate Percentage And Difference Of Two Values In Matrix Report In Ssrs 2008

Dec 2, 2014

I am creating matrix report with grouping on WEEK and Fiscalyearweek,I need to calculate of difference between FY14W01,FY15W01 ande  percentage of those..how to calculate in ssrs level.

View 13 Replies View Related

Sorting Parameter Values In SSRS Model Based Report

Sep 21, 2007

Hi,

I have created a report using Report designer (Visual Studio, using Data Model as a data source), in the report I had created few datasets (with single filed) to populate the report parameters, lets say I have created a multi valued Parameter CustomerName and assigned field from a dataset,

result are coming correctly and combo box is getting populated but the customers are not in alphabetical order!

I want to sort it and need to specify it in report (please note that I am using Report Model as a data source and I cant sort the source table in the data base to get the result sorted)


Please let me know if anybody has done that or forward me if know some link which talks about it.


Thanks in advance.

Regards,

Jayant Jape

View 23 Replies View Related

Transact SQL :: Creating Report - Query With Parameters Based Off Values

Sep 1, 2015

I have the following report I need to create with 2 parameters. An equal OR not equal. I need the report to have a drop down that has equal to  '1024' or a drop down option that IS NOT equal to '1024'. I also need the WHERE clause to return the equal or not equal based on the user selection inside of SSRS.

SELECT user1 AS [Company], reference AS [PAI_REF], statenumber,
LEFT(user4, 7) AS [Supplier Code],
user4 AS [Company Information], 
user8 AS [Transaction Type], user2 AS[Invoice Number], 
--CONVERT(VARCHAR,CONVERT(Date, user3, 103),101) AS [Invoice Date],
[routeName] AS [Route], username AS [User Name]

[Code] ....

View 2 Replies View Related

Show/Hide Report Parameters Based On Selected Values In Different Parameter

Mar 14, 2007

Hi All,


I have requirement where first I need to show only one report
parameter. Based on user selection I need to prompt or show the user
another report parameter.


Say suppose I have 3 parameters. User selects first value in first
parameter I should not show the other 2 parameters. If user selects
second value in first parameter I should show second parameter and
hide third parameter. There is no relationship between these 2
parameters except user selection. Similarly if user third value in
first parameter then I should show third parameter and hide second
parameter.


Is this possible? I can not see any Visible property for report
parameters.


If yes, how to achieve this functionality?


Appreciate your help.


Regards,
Raghu

View 1 Replies View Related

Calculate Age Based On Dob

Aug 26, 2004

hi all;

I have seen posts on numerous websites to get the age from a dob column I am faced with the same problem but get this error:

Server: Msg 403, Level 16, State 1, Line 1
Invalid operator for data type. Operator equals divide, type equals datetime.

when I run the following query:

SELECT ROUND((currentdate - DOB)/365.24,0) FROM FL1_A_Backup

All I need is a simple statement that calcualtes the age from the dob column(smalldatetime) then creates a new row which it puts the data into.
I have already created a CurrentDate column which has a (getdate()) value attached to it.

This is nothing fancy or complicated and I just need to figure out from the year I'm not really concerned about if the person has a bday tomorrow or so on.

I know I am probably doing something wrong with this query and am not shy to say that I have only been using ms sql for a couple of months (basic select statements).

View 14 Replies View Related

Reporting Services :: Date Range Filter Based On Date Values Returned In Report?

Aug 27, 2015

I have a QA Deployment Date field that is being returned in a custom report I created. I also found a sample date range parameter:

What I want to accomplish:

I want to select a From and To Date and filter the report to only display the rows that have the QA Deployment Date within the selected range.

For example.. I want to select From Date (8/1/2105) and To Date (8/31/2015) and I only want to return only the results that have a QA Deployment date between that selected range.

View 3 Replies View Related

Calculate Update Time Based On Recordcount

Apr 10, 2008

I have a number of databases with large tables. I need to update them from time to time. I want to get the recordcount of the table and calculate based on that the amount of time it would take to update the table. Any idea who I can do this? I'm using coldfusion 8 with sql to do this. Any advice would be appreciate!

Thanks
Shuvi

View 2 Replies View Related

Transact SQL :: Calculate Average Based On A Scenario

Oct 30, 2015

Col1                      Col2       Col3          Col4
54763.00              21           0              0             
--Row1
59574.00              23           0              0             
--Row2
64085.00              20           0              0             
--Row3
0.0               0.00      0           0              0             
--Row4

I'm trying to calculate Average of Col1 of above table based on below scenario:

CASE WHEN all the columns in the above table are “0” (as highlighted) THEN I want AVERAGE of Col1 as (Row1+Row2+Row3)/3

ELSE if at least one of the column of highlighted row has value other than “0”, THEN I want the AVERAGE of Col1 to be (Row1+Row2+Row3+Row4)/4

View 7 Replies View Related

Transact SQL :: Calculate Data Based On Position

Jun 4, 2015

I have a table "PrintArea" with below table structure.

The Details column have " " separated data.

CREATE TABLE [dbo].[PrintArea](
[ID] [int] IDENTITY(1,1) NOT NULL,
[AccessDate] [datetime] NULL,
[IPAddress] [varchar](16) NULL,
[SerialNum] [varchar](256) NULL,
[Description] [varchar](256) NULL,
[Details] [varchar](2048) NULL,
)

This is how the data lookis like.

INSERT [dbo].[PrintArea] ([ID], [AccessDate], [IPAddress], [SerialNum], [Description], [Details]) VALUES (104280, CAST(0x0000A28A00A88310 AS DateTime), N'70.89.39.161', N'InSign-f529c824-85a6-4a64-8c59-e9f786d718f3-YM2AS31367,BFEBFBFF000306A9', N'Printing', N'Headboard_Insert_4
1
1
7938
5579

[Code] ...

I want to calculate totalAreaPrinted based on below formula from Details column.

View 2 Replies View Related

Disaster Recovery: Calculate DB Size Based On .dmp Files

Feb 7, 2000

I have a client with no backup of MASTERdb or Help_rev_devices, all I have is a couple of .dmp's of the production data. In order to run DISK REINIT I need to know the size of the database, is there any way of finding out the size of the database device, if all you have to go with is a backup dump file?

I know it won't be pretty.

`Ken

View 1 Replies View Related

SQL 2012 :: Calculate Stock Aging Based On Hand Quantity

Jan 18, 2015

I want to calculate stock aging (qty, cost) based on the on hand quantity.

Currently I am recording only in/out transaction only.

For ex: Item A i have 115 pieces (Balance stock) as on to day.

Transaction History
---------------------
Lot 1 - 01/01/2015 - 50
Lot 2 - 10/02/2015 - 50
Lot 3 - 11/03/2015 - 50
Lot 4 - 15/04/2014 - 50

I want to calculate cost of balance qty as shown below.

Jan -
Feb - 15 @ 1.1
Mar - 50 @ 0.90
Apr - 50 @ 1.2

Database schema
--------------------
CREATE TABLE [dbo].[StockManagement](
[Uniid] [int] IDENTITY(1,1) NOT NULL,
[StockCode] [int] NULL,
[TransactionDate] [datetime] NULL,
[TransactionTime] [time](0) NULL,

[Code] .....

View 0 Replies View Related

T-SQL (SS2K8) :: Count Number Of Values That Exist In A Row Based On Values From Array Of Numbers

Apr 16, 2014

How to count the number of values that exist in a row based on the values from an array of numbers. Basically the the array of numbers I want to look for are in row 1 of table [test 1] and I want to search for them and count the "out of" in table [test 2]. Excuse me for not using the easiest way to convey my question below. I guess in short I have 10 numbers and like to find how many of those numbers exist in each row. short example:

Table Name: test1
Columns: m1 (int), m2 (int), m3 (int) >>> etc
Array/Row1: 1 2 3 4 5 6 7 8 9 10

------
Table Name: test2
Columns: n1 (int), n2 (int), n3 (int), n4 (int), n5 (int)

Row 1: 3, 8, 18, 77, 12
Row 2: 1, 4, 5, 7,18, 21
Row 3: 2, 4, 6, 8, 10

Answer: 2 out of 5
Answer: 4 out of 5
Answer: 5 out of 5

View 2 Replies View Related

Power Pivot :: Calculating Values For Future Dates Based On Past Values

Nov 13, 2015

I am working with a data set containing several years' of monetary values. I have entries for past dates and the associated values, and I also have entries for future dates. I need to populate the values of the future date records with the values from the same date the previous year. Is there any way this can be done in Power Pivot?

View 6 Replies View Related

How To Calculate Sum For Distinct Values In MDX

Jul 27, 2007

Hi ALL,
I need help in calculating sum of market value based on property_id. The sum should be calculated by finding the average market value for a given property and then sum the individual average of the property to get the Distinct sum.

I have a very little knowlegde in Cubes and analysis services. I need to perform this distinct sum by using calculated members using MDX on SQL server 2000.

Data example

P_Code Cus Prpty_IdMrkt Val

3000 1234 1111 $10,000 $10,000
3000 1234 2222 $20,000
3000 1234 3333 $30,000 $20,000
3000 5678 1111 $10,000
3000 5678 2222 $20,000 $30,000
3000 5678 3333 $30,000
3000 1020 1111 $10,000
3000 1020 3333 $30,000

Distinct Sum $60,000

Thanks in Advance

Brijesh

View 2 Replies View Related

T-SQL (SS2K8) :: Dynamically Change Values In Script Based On 3 Values

Feb 27, 2014

I have a script that I use after some amount of data massaging (not shown). I would like to be able to change the

1) denominator value (the value 8 in line 32 of my code) based on how many columns are selected by the where clause:

where left(CapNumber,charindex('_', CapNumber)-1) = 1where capNumber is a value like [1_1], [1_4], [1_6]...[1_9] capNumber can be any values from [1_1]...[14_10] depending upon the specialty value (example: Allergy) and the final number after the equal sign is a number from 1 to 14)

2) I'd like to dynamically determine the series depending upon which values correspond to the specialty and run for each where: left(CapNumber,charindex('_', CapNumber)-1) = n. n is a number between 1 and 14.

3) finally I'd like to dynamically determine the columns in line 31 (4th line from the bottom)

If I do it by hand it's 23 * 14 separate runs to get separate results for each CapNumber series within specialty. The capNumber series is like [1_1], [1_2], [1_3],[1_4], [1_5], [1_6], [1_7], [1_8],[1_9]
...
[8_4],[8_7]
...
[14_1], [14_2],...[14_10]
etc.

Again, the series are usually discontinuous and specific to each specialty.

Here's the portion of the script (it's at the end) that I'm talking about:

--change values in square brackets below for each specialty as needed and change the denom number in the very last query.

if object_id('tempdb..#tempAllergy') is not null
drop table #tempAllergy
select *
into #tempAllergy
from
dbo.#temp2 T

[Code] ....

If I were to do it manually I'd uncomment each series line in turn and comment the one I just ran.

View 6 Replies View Related

Case Statement - Calculate No Of Days Based On User Input Start And End Date

Jan 5, 2015

I have to produce a report to calculate no of days based on user input start date and end date. I have tried to explain below.

say for eg: in the tables I have emp name
user 'Phani' started work from - EStart 20/11/2014EEnd 10/01/2015 - total days --datediff
within his work period he did different roles:

PhaniMarketing (prSt Date) 20/11/2014prE date (28/11/2014) Total 9 days
PhaniAdmin (prSt Date) 29/11/2014prE date (20/12/2014) Total 22 days
PhaniCRM (prSt Date) 20/12/2014prE date (10/01/2015) Total 22 days
Total days 53 Days

For this :

I calculated datediff + 1 and got sub jobs days BUT

say financial director wants to see Title of 'Sub Jobs' with 'Days' from 1st Dec to 31st Dec

so on paper I calulated as :

1-31 Dec 2014
PhaniMarketing NULL (Do not fall in Req Dt)
PhaniAdmin 20 (Deduct 2 days of Nov & calculated 20 days of Dec)
PhaniCRM 11 (Deduct 20 days of Nov and deduct 11 days of Jan so for Dec , we got 11 days)
Total days 31

HOW CAN I USE Case statement to calculate days for given start date and end date. I have to include all three totals, 1 for Job dates, 2, subjobs dates, 3 cal of days for a requested period.

View 4 Replies View Related

Calculate Datediff Against Lesser Of Several Values

Apr 18, 2008

I need to calculate the datediff in minutes between Date1 and the lesser of Date2, Date3, Date4 (whichever came first)

View 3 Replies View Related

Calculate The Values From A Underlying Table

Jan 17, 2007

I am building a customerlist within the customer sales of a period. I have a dataset with two tables: "customer" and "customer_ledger_entry".

In the report I will present the customer number, the customer name and the sales. The problem is the sales value is not available as a field, but I have to calculate this value from the "customer_ledger_entry" table. In this table are several entries (invoices, credit notes, etc.)

How to calculate the values from a underlying table?

View 6 Replies View Related

SQL Server 2012 :: Calculate Failure Rates Of Systems Based On Cases Opened Through Support

Jun 5, 2014

I am trying to build a query which will be used in an automated report to calculate failure rates of systems based on cases opened through support. Here is where I am stuck. Some systems may have multiple cases opened within the same span of another cases however we would consider this one failure:

System ACase12013-07-11 13:17:09.0002013-07-15 12:05:03.000
System ACase22013-07-12 16:27:50.0002013-07-12 16:29:12.000
System ACase32013-07-12 17:30:32.0002013-07-12 17:40:11.000
System ACase42013-07-12 19:00:24.0002013-07-12 19:04:14.000
System ACase52013-10-01 18:02:23.0002013-10-01 18:11:26.000

Lets say System A generated those 5 cases however Case 2,3 and 4 all happened within the same period as Case 1 so those 4 cases should count as one failure so my end result should be

System ACase12013-07-11 13:17:09.0002013-07-15 12:05:03.000
System ACase52013-10-01 18:02:23.0002013-10-01 18:11:26.000

And that system should show me 2 failures. I was thinking of using a temp table but not sure if that is possible as I am stumped on how to compare the dates to be able to validate if they fall within the range of an older case and whether or not to include them into the new Temp Table.

View 8 Replies View Related

T-SQL (SS2K8) :: How To Calculate Total Sum Of Values Of Table

Jul 11, 2014

I've the table like

create table accutn_det
(
fs_locn char(50),
fs_accno varchar(100),
fs_cost_center varchar(100),
fs_tran_type char(50)

[Code] .....

Like all location details stored from all months in these table

here Dr=debit,Cr=Credit Formula= 'Dr-Cr' to find the salary wavges of amount

so i made the query to find the amount for may

select
fs_locn,
fs_accno,
amount=sum(case when fs_accno like 'E%' and fs_tran_type='Dr' then fs_amount
when fs_accno like 'E%' and fs_tran_type='Cr' then fs_amount * -1
end
)
from
accutn_det where fs_trans_date between '01-may-2014' and '31-may-2014'
groupby fs_locn,fs_accno

now i need the sum values of all costcenter for the particular account.how to do that?

View 9 Replies View Related

Calculate Relative Totals With Absolute Values

Feb 28, 2015

Have a bit of an SQL challenge in that I need to create a well performing view in SQL2008R2 which calculates hours remaining at any given point in time. This is not a simple sum but has some absolute values included.

---------------------------------------------------------------------------------------------------
-- Basic simplified structure of maintenance and usage tables
---------------------------------------------------------------------------------------------------
CREATE TABLE #Maintenance (Id int NOT NULL
IDENTITY(1, 1)
CONSTRAINT PK_Maintenance PRIMARY KEY,
MaintenanceDate smalldatetime NOT NULL, -- When maintenance hours are reset
HoursAvailable numeric(5, 1) NULL -- Available hours until next maintenance
)

[Code] ....

---------------------------------------------------------------------------------------------------
-- Required output view so that at any given point in time I can determine hours remaining
---------------------------------------------------------------------------------------------------
-- AtDate HoursAvailable
-- '01-Jan-2015 15:00' NULL -- before first maintenance hence unknown
-- '10-Jan-2015 10:00' 10.1 -- maintenance hours reset
-- '11-Jan-2015 07:30' 8.9 -- subtract 1.2
-- '11-Jan-2015 11:10' 2.9 -- subtract 6.0
-- '15-Jan-2015 00:00' -0.1 -- subtract 3.0
-- '01-Feb-2015 00:00' 12.2 -- maintenance hours reset
-- '02-Feb-2015 13:00' 10.0 -- subtract 2.2

View 4 Replies View Related

Power Pivot :: Calculate Repeated Values

Jun 15, 2015

I have one table

Customer ID; Sort of Transactions;Value
1234;Kit;1
1235;Kit;1
1236;Revenue;30
1235;Kit;2
1238;Revenue;10
1235 ;Kit;1

Looking for a formula for calculated column, which gives me sum of "Kit" for Customers

1234;Kit;1;1
1235;Kit;1;4
1236;Revenue;30;0
1235;Kit;2;4
1238;Revenue;10;0
1235 ;Kit;1;4

View 2 Replies View Related

Transact SQL :: Efficient Way To Calculate Unique Values?

Jul 14, 2015

I have a data set as -

ID       Set Date          DB Date
100     Null                 07/01/15
100     07/05/15         07/02/15
100     07/10/15        07/08/15

I want to able to get 2 unique dates

1. 07/02/15 - As I want the DB date for ID - 100 when set date changed from a null value to non null value.

2. 07/08/15 - As I want the DB date for ID - 100 when a non null set date changes.

The table has such records for lot of different ID's.

View 29 Replies View Related

Select Values From One Table Based Upon Values In Another...

May 19, 2006

How do I:Select f1, f2, f3, from tb1 where f1=Select f1 from tb2 where f1='condition'?

View 3 Replies View Related

Use Alias Name As A Column - Calculate Yearly Finance Values

Feb 25, 2014

I'm using this query to to calculate yearly finance values.

select [Year],[FinanceValue-2014],[FinanceValue-2013],[FinanceValue-2012],[FinanceValue- 2014]-[FinanceValue-2013] as [FinanceValue Variance]

Now I need to multiply the [FinanceValue Variance] * 2.50 and for that how can I use the alias name as column in the query. I tried this but it says invalid column name.

select [Year],[FinanceValue-2014],[FinanceValue-2013],[FinanceValue-2012],[FinanceValue- 2014]-[FinanceValue-2013] as [FinanceValue Variance], [FinanceValue Variance] * 2.50 as [NewVariance] from Finance

SumofVariance output will be like 5690.5893656 Also how can I show the SumofVariance to round off 4 decimal places like this 5690.5894.

View 1 Replies View Related

Calculate The Growth Percentage Or Previous Dates Values

Feb 7, 2008

This code displays dates, File name, and File size for four seperate dates 11/20/2007 , 11/30/2007, 12/30/2007 and 01/31/2007 . I'm trying to show the percentage growth from date to date (ie 11/20/2007 -11/30/2007 percentage growth)

is there a way i can get the previous date file size for each entry, so i can have a variable for the calculation. Or i can get the calculate it within this code (ie database_size_mb / ((database_size_md ) where database_size_datetime -1) *100
or whatever the formula is for percentage growth.




Code Snippet
SELECT
Database_Size_Datetime,
Database_file_name,
Database_Size_Mb
FROM RC_STAT.dbo.Tbl_Database_Statistics AS Tbl_Database_Statistics_1
GROUP BY Database_Size_Datetime, Database_file_name, Database_Size_Mb

this is what it displays now:


2007-11-20 00:00:00.000 ACTReplication_Data 442.5000
2007-11-30 00:00:00.000 ACTReplication_Data 442.5000
2007-12-31 00:00:00.000 ACTReplication_Data 442.5000
2008-01-31 00:00:00.000 ACTReplication_Data 442.5000
2007-11-20 00:00:00.000 ACTReplication_Log 14.8125
2007-11-30 00:00:00.000 ACTReplication_Log 109.7500
2007-12-31 00:00:00.000 ACTReplication_Log 112.9375
2008-01-31 00:00:00.000 ACTReplication_Log 115.5625
2007-11-20 00:00:00.000 BAMArchive 0.6875
2007-11-30 00:00:00.000 BAMArchive 0.6875
2007-12-31 00:00:00.000 BAMArchive 0.6875
2008-01-31 00:00:00.000 BAMArchive 0.6875
2007-11-20 00:00:00.000 BAMArchive_log 0.4922
2007-11-30 00:00:00.000 BAMArchive_log 0.4922
2007-12-31 00:00:00.000 BAMArchive_log 0.4922
2008-01-31 00:00:00.000 BAMArchive_log 0.4922

View 1 Replies View Related

How Do I Jump To Another Report Based On A Value In My Current Report? Report Has No Parameters.

May 3, 2007

How do I jump to another report based on a value in my current report. The report that I am jumping from has no parameters, just values.

View 7 Replies View Related

Calculate Total Tuition By Accumulating Column Values ( Loop?)

Jun 3, 2004

I am trying to create a procedure which will calculate the total tuition
This process involves 3 tables.
Contract table has tuition information which is all $100 (set price).
Discount table has discount type and discount percentage (ex. 0.3) on each discount type.
ContractDiscount table have contract number and discount number to connect both tables


I think I need to create a loop since some contract gets more than one discount.
I have to calculate and get result nee to be like this

total_tuition = (tuition - discountPer * tuition) - this has to be a loop condition

Do you have any suggestion ?

Thanks

View 3 Replies View Related

SQL Server 2012 :: Calculate Total On-peak And Off-values For A Month

Nov 25, 2014

SQL query to calculate the total on-peak and off-values for a month as well as the Max/highest on-peak/offPeak hourly value for that month.

On a daily basis i store the hourly values of the meter in a SQL table.

On-Peak

Summer: Apr-Oct hours(7-22) on weekdays (M-F)
Winter: Nov-Mar hours(8-23) on weekdays (M-F)

off-Peak

Summer: Apr-Oct hours(0-6,23,24); Weekends (Saturday & sunday) ; all public holidays during those months as to be considered as off peak

Winter: Nov-Mar hours(0-7,24);Weekends (Saturday & sunday); all public holidays during those months as to be considered as off peak

Here is the DB Table Structure:

Column Name & Data Types
HourId - Uniqueidentifier
CustomerName - nvarchar(50)
Readingdate - datetime
IntegratedHour - TinyInt
Load - decimal(18,4)
Generation - Decimal (18,4)
LastModified - Datetime
ModifiedBy - nvarchar(50)

View 9 Replies View Related

SQL Server 2014 :: Calculate Running Difference In Values Between Days?

Oct 13, 2015

I am trying to write a query to calculate the running difference between data on different dates. Below is what my table of data looks like. Basically I want to calculate the difference between the total_completed for each state and date.

DateStatesTotal_Completed
08/27/15CA 19,952
09/11/15CA 26,336
10/02/15CA 35,444
10/08/15CA 38,278
08/27/15CO2797
09/11/15CO3264
10/02/15CO4270
10/08/15CO4297

below is what I am trying to achieve:

DateStatesTotal_CompletedCompleted_Difference
08/27/15CA 19,952 0
09/11/15CA 26,336 6,384
10/02/15CA 35,444 9,108
10/08/15CA 38,278 2,834
08/27/15CO27970
09/11/15CO3264467
10/02/15CO42701,006
10/08/15CO429727

below is my code (I almost have what I need) I just can't figure out how show 0 as the completed_difference for the first Date for each state since there is no prior date to calculate against.

MRR_TOTALS_WEEK_OVER_WEEK AS
(
SELECT
T1.[Date]
,T1.States
,T2.Total_Completed
,ROW_NUMBER() OVER(PARTITION BY T1.States ORDER BY T1.States,T1.[Date]) AS ORDERING
FROM TOTAL_CHARTS T1
LEFT JOIN TOTAL_COMPLETED T2 ON T1.[Date] = T2.[Date] AND T1.States = T2.States
)

[code].....

View 4 Replies View Related

Analysis :: Calculate Percentage Difference Of Two Values From Selected Years

Aug 31, 2015

Developing a measure which displays the difference of two values from the selected years.

An example : Show the difference of the sales amount from 2013 and 2015.

Since i am not really into mdx or calculated members.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved