Calculating A Percentage Using Aggregate Task
Feb 28, 2007
Hi,
I have a column called QTY and I need to calculate the percentage for each row based on the total sum of the column. They are all decimals. I have an OLE DB source that is reading the table used an aggregate task using the QTY column with operation SUM and called the output SUM OF QTY. Then I have a Derived Column task that takes the QTY column / SUM OF QTY * 100 to create the percentage. My numbers are not coming out correctly and when I put a data viewer from the aggregate task, it shows the same number for both columns:
QTY SUM OF QTY
0.01833 0.01833 (this should be the sum of all the decimals in the QTY col)
What am I doing wrong?
Thanks in advance!
Isabelle
View 3 Replies
ADVERTISEMENT
Mar 25, 2008
My site has members. Each member has a certain goal, an amount that they are hoping to raise. Here's my tables:
---------------------
Members
---------------------
ID | Goal
---------------------
---------------------
Donors
---------------------
Amount | MemberID
---------------------
I'm trying to get the percentage of money raised compared to their goal. Basically 100*(SUM(Amount)/Goal). Here's my stored procedure:
CREATE PROCEDURE sproc_GetGoalPercentage
(
@memberid int
)
AS
SELECT(SUM(D.Amount)/M.Goal)*100
FROMMembers AS M INNER JOIN Donors AS D
ON M.ID = D.MemberID
WHEREM.ID = @memberid
GROUP BY M.Goal
RETURN
All it does is return 0.
View 7 Replies
View Related
Mar 5, 2015
I'm trying to calculate the % of people but it doesn't seem to be working. I get the following error:
ORA-00904: "ACT"."PAT_ID": invalid identifier
00904. 00000 - "%s: invalid identifier"
What am I doing wrong?
WITH ENCOUNTERS AS
(
SELECT COUNT(*) AS TOT_COUNT
FROM
(
SELECT DISTINCT PATIENT.PAT_ID
[code]....
View 2 Replies
View Related
Jan 25, 2008
Here is the sample data .
Tradedate Type TotalOrdQty FillQty
2008-01-24 ATS 1392906.0 817965.0
2008-01-23 ATS 645306.0 469269.0
.... Goes on
Depending on the Type Column, I have to calculate the Percentage change in the TotalOrderQty and FillQty ( Daily , monthly , Yearly )
Is there a way to calculate the Percentage change with out using a
cursor.
Thanks
Venu
View 5 Replies
View Related
Oct 19, 2007
Hi All,
I have to create a table like this using SSRS.
LoanStatus NoOfLoans Amouunt Percentage
Started
1,000
1,000,000.00
100%
Sent to Partner
350
350,000.00
35%
Denied by Partner
50
50,000.00
5%
Accepted by Partner
300
30,000.00
30%
Loan Apps Pnd Disb
10
100,000.00
1%
Loan Apps Disbursed
290
290,000.00
29%
Table is grouped by loan status.
Percentage is calculate as NoOfLoans/TotalNoOfLoans.
Please can anyone tell me how to calculate the grand total and Percentages?
View 5 Replies
View Related
Jul 22, 2015
Calculating % of Column Total in Charts...
Doing this exercise in Excel is always very simple:
View 3 Replies
View Related
Feb 26, 2007
We have a Data Flow Task.
Inside this, we have a OLE DB Data Source which calls and executes a stored procedure.
We use a Row Count Task to count the number of rows returned by the OLE DB Data Dource Task.
Then, we use an aggregate function task to get the sum of all the rows of one particular column that is returned from the OLE DB Data Source.
The issue here is that we want to assign the sum value returned by the Aggregate Function Task to a User Variable named User::Variable. We have tried to assign this by using @User::Variable and User::Variable, but neither of those return the expected value.
If there is any other method to do the same then let us know.
We have checked the that the row count is greater than zero.
Any help would be very much appreciated.
Thanks in advance.
View 4 Replies
View Related
Jan 13, 2008
To create a strike file for a text file output, I piped the output of a query throught a mulitcast. One output is the actual flat file, the other output is the strike file. The next task for the strike output is an aggregate count and sum functions. If the original query returns no records, the count shows zero, but the sum shows NULL. Further down the process I have to pad out the values with zero's, but that NULL is causing problems. How do I convert the Null to either an empty string, or a value of zero?
Thanks
View 1 Replies
View Related
Jun 2, 2011
In my current project i have a requirement to assign value of an aggregate transform to a variable. But i need to accomplish it without using a script task.
View 3 Replies
View Related
Oct 19, 2007
Can any1 tell me why i am getting an error
SELECT DISTINCT
--p.voucher,
--p.amount,
p.siteID,
b.siteID,
SUM((round(b.total,2,2)) - SUM(round(p.amount,2,2))) AS OutStandingBalance,
SUM((round(b.total,2,2)) - SUM(round(p.amount,2,2))) AS CashCheque,
SUM((round(b.total,2,2)) - SUM(round(p.amount,2,2))) AS Vouchers
FROM
BillingTotal b,
Payment p
--WHERE
-- s.sitename=@cmb1
--AND p.siteid = s.siteid
-- p.voucher = 0
-- p.voucher = 1
GROUP BY p.siteID,b.siteID
Msg 130, Level 15, State 1, Line 1
Cannot perform an aggregate function on an expression containing an aggregate or a subquery.
View 8 Replies
View Related
Sep 22, 2015
I have 2 Dimensions in SSAS (see below end), I want to create a calculated member, named
This_Year_Billable_Objective_Count, with its formula = BillableLastYear*(100+ BillableObjective)/100.
The first factor, BillableLastYear is a number, aggregated (sum) from child units.
The second factor, BillableObjective is a percent number (for example 28 means 28%), it's not aggregate. It's an dependent value for each unit.
How can I calculate This_Year_Billable_Objective_Count for each unit?
\ able 1
SELECT [UnitKey]
,[UnitID]
,[UnitName]
,[Unit2Name]
,[Unit3Name]
,[Unit4Name]
[Code] .....
View 6 Replies
View Related
Jul 15, 2005
I have a column that has an expression with a runningvalue in it, a "Carrying Cost" for each month. I need to create another column that aggregates the monthly Cost. I can't to do a Runningvalue on the Runingvalue. I can't even do a Sum on the Runningvalue.
View 9 Replies
View Related
Jun 21, 2007
OK. I give up and need help. Hopefully it's something minor ...
I have a dataflow which returns email addresses to a recordset.
I pass this recordset into a ForEachLoop configuring the enumerator as (Foreach ADO Enumerator). I also map the email address as a variable with index 0.
I then have a Execute SQL task which receives this email address as a varchar variable (parameter 0) which I then use in my SQL command to limit the rows returned. I have commented out the where clause and returned all rows regardless of email address to try to troubleshoot this problem. In either event, I then use a resultset to store the query result of type object and result name 0.
I then pass this resultset into a script variable to start parsing the sql rows returned as type object. ( I assume this is the correct way to do this from other prior posts ...).
The script appears to throw an exception at the following line. I assume it's because I'm either not passing in the values properly or the query doesn't return anything. However, I am certain the query works as it executes just fine at the command prompt.
Try
ds = CType(Dts.Variables("VP_EMAIL_RESULTS_RS").Value, DataSet)
My intent is to email the query results to each email address with the following type of data by passing the parsed data from the script to a send mail task. Email works fine and sends out messages but the content is empty. I pass the parsed data as string values to the messagesource and define the messagesourcetype as a variable in the mail task.
part number leadtime
x 5
y 9
....
Does anyone have any idea what I might be doing wrong?
thanks
John
View 5 Replies
View Related
Mar 1, 2004
Hello
I need a little help.
I'm working on this query but is not returning the value I want
SELECT CONVERT(float, hits)/ abat as 'AVE'
The hit column value is 3 and abat 4 I want to return 750 but so far I'm getting
.75 or if I try decimal returns .7500000000
Thanks
Robert
View 2 Replies
View Related
May 26, 2006
I need to write a page that figures out the percentage of students passing an assessment item where students are from a particular school, grade, gender, and are not medically exempt.
I did a Count Statement on all test taker, and another Count Statement for the number passing the item who were not exempt. Both of the statements are shown through seperate datalist controls. I then want to get the percentage by dividing the number passed by the number taken and mulitplying that by 100.
Is there a better technique or can I do this in a sql statement somehow?
View 1 Replies
View Related
Mar 18, 2008
I am havingSELECT DISTINCT Name, (( count(id_Name) * 100 ) / (SELECT count(id_Name) AS tt FROM dbo.Name)) as PercentageFROM dbo.NameGROUP BY Namebut I get only integers : 1,0,4,12I need : 1.63, 0.4, 4.05, 12.78how can I do it ?is there a better way to calculate a percentage ?thank you
View 5 Replies
View Related
Jun 3, 2008
Hi i create a temp table that count how many A,B,C and D there where in a table.
I need calculate the percentage.It could be easy put the problem is that i cannot devide by the same number.
Here my temp table DECLARE @Temp table
(
strLastName varchar(50),
strFirstName varchar(50),
strReponse char(10),
strNomObjet nvarchar(200),
strDescripteurOrdre char(10),
strNomDescripteur nvarchar(200),
strObjetOrdre char(10)
)
I want to check how many A there is.
SELECT strNomObjet,strNomDescripteur,count(*) FROM @Temp
WHERE strReponse = 'A'
GROUP BY strNomObjet,strNomDescripteur
This will give me somthing like this
For the first one there 25 A
Second 27 A
NOMBRE ET OPÉRATIONSdémontre une compréhension du concept du nombre25
NOMBRE ET OPÉRATIONSpeut faire les opérations sur les nombres pour résoudre des problèmes27
STATISTIQUES ET PROBABILITÉSpeut suivre les étapes d'une démarche statistique26
RÉGULARITÉS ET RELATIONSutilise des régularités (suites logiques) pour résoudre des problèmes24
RÉGULARITÉS ET RELATIONSutilise des relations mathématiques (algèbre) pour résoudre des problèmes23
FORMES ET ESPACE (géométrie)utilise la mesure pour résoudre des problèmes17
FORMES ET ESPACE (géométrie)utilise les figures géométriques pour résoudre des problèmes22
STATISTIQUES ET PROBABILITÉSutilise les probabilités pour résoudre des problèmes27
FORMES ET ESPACE (géométrie)utilise les transformations géométriques pour résoudre des problèmes22
After that i use
SELECT count(*) FROM @Temp
GROUP BY strNomObjet,strNomDescripteur
That will give me how many person have been tested.
It will give me this
36
36
35
36
35
36
36
35
35
So i need to take the first 25
25 / 36 * 100 = 69.4%
27 / 36 * 100 = 75%
26 / 35 * 100 = 74.2%
I hope you understand what i mean!
Any idea?
Tks in advance
View 8 Replies
View Related
Jul 23, 2005
Hello!I have a need to create a function that will return a sublist ofelements from a table based on an associated column value and itsranking within the table (based on a percentage range).To expand with a simple example (only 4 elements):Element | Value---------------A102 | 5A506 | 10A322 | 15A342 | 20I would like to be able to return the range of elements that lie in the50-75% value range (e.g. third quartile range). Therefore with onlythese four elements I would want to return the element code 'A322'.I have attempted to achieve this by using SELECT TOP n PERCENT. I canbring back the required range by combining two select percentstatements.SELECT Element from ELEMENT_TABLEWHERE Element IN(SELECT TOP 75 PERCENT Element FROM ELEMENT_TABLE ORDER BY Value)AND Element NOT IN(SELECT TOP 50 PERCENT Element FROM ELEMENT_TABLE ORDER BY Value)The problem is that I cannot seem to pass a variable to this percentageso if I want another percentage range set, I ave to define anotherfunction.My question therefore is does anyone know either(1) a way I can pass a variable (n) to these SELECT n PERCENTstatementsOR(2) an alternative way of doing this?Many thanks!Andrew
View 3 Replies
View Related
Mar 11, 2008
Hi team, I have a column 'a' of a table in which i would like to calculate a percentge of all entries in that column 'a' and place the results in a column 'c' beside column 'a'. Can this be done in sql server ??
View 5 Replies
View Related
Sep 13, 2006
Lets say I have a table called ProductProductId Name Price Category1 Table 20.00 Furniture2 Chair3 Lamp Misc What is the SQL command that would give me as a percentage the completeness of a row, either complete or empty?For e.g. SELECT ... FROM Product WHERE ProductId = 2 ; should give a result of 50% as half the Columns in that row are empty.e.g. SELECT ... FROM Product WHERE ProductId = 3 ; should give a result of 25% as 1/4 of the Columns in that row are empty.I tried used something like SELECT COUNT(COLUMN_NAME) AS Expr1FROM INFORMATION_SCHEMA.COLUMNSWHERE (TABLE_NAME = 'Product')but dont know how to go forward.
View 2 Replies
View Related
Mar 11, 2008
Ok guys, here is my query
GridSqlDataSource1.SelectCommand = "SELECT *, (([WinSum])/(([WinSum]) + ([LossSum]))) AS WinPercent FROM [ResultsView] WHERE ([CDIV] = @CDIV) ORDER BY [CTEAM]"
I need it to give me a 3 decimal percentage for WinPercent, but right now it is giving me 0 because as an example:
6 / 7 = 0 instead of 0.857
Any ideas?
View 10 Replies
View Related
May 6, 2008
Hello every one, I am trying to get the total percentage of a column
Regions
Workbooks Required
Workbooks Sent
Workbooks Returned
Workbooks Complete
A
20
21
20
18
B
33
33
33
30
C
19
29
18
16
D
9
18
8
8
Totals
Thanks in advance for any tips/solutions.
View 5 Replies
View Related
Aug 5, 2007
Hi Guys,
I am in need some uinderstanding of how to return the percentage of calls that were closed, between 1, 2 ,3, 4 and 5 days (possibly extendable to catch all those that were holding on to jobs to make it look like the were busy) as well as including all open jobs.
Because of my newbie status I am stumped at how to even start a query of this magnitude, and no this is not a school assignment :-) just some one who is very new to T-SQL and wanting to learn how to extract data from an MS SQL database server, as I find it fascinating, also my bosses find it fascinating the type of data I am returning for them so far.
So enough waffling.
This query will be run through VBA, any variable(s) will be supplied by VBA.
DB name = Envisage
Table name = HD_Call
Columns = DateRaised (datetime, null), DateCompleted (datetime, null)
Help in understanding how to construct this query will be grately appreciated.
View 13 Replies
View Related
Sep 14, 2004
Hi,
easy question for advanced users:
I have a dimension called "Movement rate". The members are "1" to "6".
There is a measure called "No. of Products".
What i easily like to do is showing the percentages "No. of Product" for each "Movement rate" of the amount of "No. of Products" without using the frontend-tool.
Thx in advance for any help.
Andreas
View 2 Replies
View Related
Apr 28, 2004
b/w two colums?
i have two numberic columns
i want percentage of column2/column1
They are on separate table.. l am intended to creat view with my results.
thanks
View 8 Replies
View Related
Aug 29, 2013
I have requirement in which i need to calculate percentage value based on billamount and concession amount..to calculate the percentage part and show the o/p.
SELECT PP.KID_ID_NO_V,(PP.FIRSTNAME_V + SPACE(1) + PP.LASTNAME_V)AS [PATIENT_NAME],BM.TOTAL_AMOUNT_M AS [BILL_AMOUNT],BM.CONCESSION_AMOUNT_M AS [CONCESSION_AMOUNT],BM.BILL_AMOUNT_M AS [TOTAL_AMOUNT],
FROM BILL_MASTER BM
INNER JOIN PATIENT_PROFILE PP ON BM.PATIENT_ID_N=PP.PATIENT_ID_N
WHERE BM.BILL_SETTLED_C='Y'
[code]....
View 5 Replies
View Related
Dec 13, 2005
Hi, Please help.
I need to calculate percentage [COUNT(ALERT_RECEIVED_DATE) FRAUDCT,over SUM(CASE WHEN FRAUD_DECISION IS NULL THEN 1 ELSE 0 END) FRAUDUNWK] I tried my best but I cant come up with the solution.
Please, help.
Thk
SELECT
CONVERT(nvarchar(10),dateadd(d,-day(ALERT_RECEIVED_DATE) + 1,ALERT_RECEIVED_DATE),101) PERIOD,
COUNT(ALERT_RECEIVED_DATE) FRAUDCT,
SUM(CASE WHEN FRAUD_DECISION IS NULL THEN 1 ELSE 0 END) FRAUDUNWK,
SUM(CASE WHEN FRAUD_DECISION ='D' THEN 1 ELSE 0 END) DECLINED,
SUM(CASE WHEN A.FRAUDID IS NOT NULL AND FRAUD_DECISION IS NULL THEN 1 ELSE 0 END) PENDING_EXCEPTION,
SUM(CASE WHEN A.FRAUDID IS NOT NULL AND FRAUD_DECISION='D' THEN 1 ELSE 0 END) DECLINED_EXCEPTION
FROM
TBLFRAUDFINDER O
View 3 Replies
View Related
Dec 13, 2005
Hi, Please help.
I need to calculate percentage [COUNT(ALERT_RECEIVED_DATE) FRAUDCT,over SUM(CASE WHEN FRAUD_DECISION IS NULL THEN 1 ELSE 0 END) FRAUDUNWK] I tried my best but I cant come up with the solution.
Please, help.
Thk
SELECT
CONVERT(nvarchar(10),dateadd(d,-day(ALERT_RECEIVED_DATE) + 1,ALERT_RECEIVED_DATE),101) PERIOD,
COUNT(ALERT_RECEIVED_DATE) FRAUDCT,
SUM(CASE WHEN FRAUD_DECISION IS NULL THEN 1 ELSE 0 END) FRAUDUNWK,
SUM(CASE WHEN FRAUD_DECISION ='D' THEN 1 ELSE 0 END) DECLINED,
SUM(CASE WHEN A.FRAUDID IS NOT NULL AND FRAUD_DECISION IS NULL THEN 1 ELSE 0 END) PENDING_EXCEPTION,
SUM(CASE WHEN A.FRAUDID IS NOT NULL AND FRAUD_DECISION='D' THEN 1 ELSE 0 END) DECLINED_EXCEPTION
FROM
TBLFRAUDFINDER O
View 1 Replies
View Related
Nov 14, 2006
I am relatively new to SQL i.e. I know the basics!
What I am trying to do is: I have a database of customer spend and I am trying to segment them into certain %ages of the search results. So, for example, find all of the customers that are in the top 10% of spenders (I also want to only select customers with a spend of greater than x!). I am trying to do this using a Case When but feel that I may be out of my depth.
Please help if you can!!
Thanks, Kris
View 4 Replies
View Related
Jun 26, 2007
I have following tables structure
Employee
---------
EMP_ID varchar PK
NAME varchar
DEPARTMENT_CODEvarchar
POSITION_CODEint
Position
--------
POSITION_CODEint PK
POSITION_NAMEvarchar
Department
----------
DEPARTMENT_CODEvarchar PK
DEPARTMENT_NAMEvarchar
Training_Module
---------------
TRA_ID varchar PK
TRA_NAMEvarchar
TRA_GROUPvarchar (three group, A,B and C)
View_Training_Module
--------------------
MV_ID int PK
EMP_ID varchar
TRA_ID varchar
VIEW_DATE datetime
Training_Module table data like this
TRA_ID..TRA_NAME..TRA_GROUP
--------------------------------------
v01SafetyVideo1G1
v02SafetyVideo2G1
v03SafetyVideo3G1
V04SafetyVideo4G2
V05SafetyVideo5G2
v06SafetyVideo6G2
v07SafetyVideo7G3
v08SafetyVideo8G3
v09SafetyVideo9G3
View_Training_Module table data like this
EMP_ID.........TRA_ID....VIEW_DATE
-------------------------------------------
p0006367V016/2/2007
p0006367V026/2/2007
p0006367V036/2/2007
p0003892V016/12/2007
p0003892V026/12/2007
p0003892V036/12/2007
p0003890V016/15/2007
p0003890V026/15/2007
p0003890V036/15/2007
p0001232V046/16/2007
p0001232V056/16/2007
p0001232V066/16/2007
p0001230V076/17/2007
p0001230V086/18/2007
p0001230V096/18/2007
We have 44 Safety training videos (15 minutes)
How can calculate the percentage of each employee in query ?
if emploee view 22 video it means that this employee
50% view the videos.
We have to calcuate
1. total number of video view by each employee, sum
2. each employee perentage of viewing.ie. percentage %
3. Group wise percentage, ?
we have three group A,B,and C, calcuate the each
group percentage in query ?
regards
Martin
View 4 Replies
View Related
Jul 23, 2005
I am trying to figure out the syntax for a query that will essentiallygive me the Percentage each of my areas contributes to the Whole. Iknow this can be achieved by multiple queries but I would like to keepit intact as one single query if possible.For Example I have the following data set--AREA MOUNE 1234SO 4312WE 12312MW 97123NE 1123SO 31WE 312MW 971The results I would like to see would look likeAREA MOU PERCENTMW 98094 .83536NE 2357 .02007WE 12624 .10751SO 4352 .03706The query I came up with is--SELECT DISTINCT Area, SUM(MOU) AS AREA_TOTAL, sum(MOU) /(SELECT SUM(MOU) AS TOTAL_MOUFROM [2004_NOVEMBER_COST])as[PERCENT]FROM [2004_NOVEMBER_COST]GROUP BY AreaAll seems to calculate with the exception of the Percent where all thepercentages are 0's.I think I need to take the first line AREA_TOTAL and now divide by theSUM(MOU) like this--SELECT DISTINCT Area, SUM(MOU) AS AREA_TOTAL, AREA_TOTAL /(SELECT SUM(MOU) AS TOTAL_MOUbut I get Invalid Column.I essence I think it is a simple query but I am hitting a wall. Anyadvice would help.Thanks,Ben
View 3 Replies
View Related
Jun 22, 2007
Hello,
I have a matrix that looks as follows:
Name Jan Feb Total
John 5 6 11
Mary 3 4 7
Total 8 10 18
I want to add a percent column to the RIGHT of the total, and also on the bottom row. I can't find any clear examples of how to do this. If I had a new column, it adds additional headers beneath my top row. Or, my columns appear to the LEFT of the data, not the right. Can some please post some simple instructions that will make my simple matrix look like this:
Name Jan Feb Total %
John 5 6 11 60%
Mary 3 4 7 40%
Total 8 10 18 100%
% 40% 60% 100% 100%
I am so stuck on this I can pull my hair out.
Thanks!
Michael
p.s. I really hope the next version of SSRS has a simple "Sub-total %" option that you can enable just like the sub-total column.
View 3 Replies
View Related
Feb 14, 2007
I am trying to display a figure as a Percentage.
The figure is 2.00000. I want it to show as 2.00%.
When i go into the formatting i select P but it displays the figure as 200.00%.
What formatting code should i use to get 2.00%?
View 7 Replies
View Related
