Hi all
As you know when you run a piece of TSQL scrypt in Query Analizer
at the bottom of the page , sql-server will show you the Time of completion of your code....is there any way to capture this time
from SQL-Server environment and use it in the Front-End Application
to inform the user?
Kind regards.
I have a date/time field with a sql format of "datetime" The actualdate/time data format is MM/DD/YYYY^hh:mm:ss:pm or "1/25/200712:00:16 AM" Both the date and time are combined on the same fieldwith a space seperating the two.I need to run a query on this date/time field using the criteria oftoday's date so if I want to search all records with todays date, Ineed to query on this field. I don't need the time, but just today'sdate (MM/DD/YYYY) portion of the field.Thanks,Brian
View 7 Replies View RelatedI have table named #t1 and three columns. CODE, Column1, and Column2.
create table #t1 (
CODE NVARCHAR(20),
COLUMN1 NUMERIC(18,2),
COLUMN2 NUMERIC(18,2)
)
And i have some data:
INSERT INTO #t1 (CODE,COLUMN1,COLUMN2)
VALUES ('432', 0,100),
('TOTAL FOR 432',0,100),
('4320001',0,250),
('4320001',50,0),
('4320001',0,140),
('4320001',300,0),
('TOTAL FOR 4320001',350,390),
('432002',200,0),
('432002',0,100),
('TOTAL FOR 432002',200,100)
drop table #t1
I want to have 4 column (named BALANCE). Balance must be column that represent running totals between two columns (Column1 - Column2) for each group of data. For each group total must start from zero.after total 432 it starts to count again for total 4320001 and again for total 432002. I'm using MS SQL SERVER 2014.
Hello,
I am fairly new to this, but I need to write a query that calculates whether an order made a shipping cutoff based on creation time, and when it actually shipped, based on local customer time. All times in the table below are central time.
Heres where it gets complicated for me. If the order was created after 8:00am local customer time the same day, and shipped prior to 5pm local customer time, it would be considered a pass, or a 1. If an order was created after 8am local customer time, BUT didnt ship until AFTER 5pm local customer time, it would be considered a failure or a 0. And to complicate things even more, if the order is created after 5pm local customer time, the order create time would be treated as it was created at 8am local customer time the following day local customer time, and would need to be shipped prior to 5pm local customer time that day. Would CASE be appropriate for this? Or am I thinking wrong? Any help would really be appreciated!!
Ordernum OrderCreate OrderShipDate TimeZ
67890 5/5/2005 11:575/6/2005 15:33 EST
35789 5/5/2005 13:575/5/2005 14:19 MST
44465 5/5/2005 13:58 5/5/2005 21:58 CST
87654 5/5/2005 18:00 5/7/2005 21:58 PST
I have a table called Tickets which contains ticket information for a machine. Each machine can have more than one ticket number opened at the same time. The ticket number contains start date/time and end date/time of the ticket. Thereefore the table looks something like this:
Ticket_No (int)
Machine_No (int)
Description (char)
Start_Time (datetime)
End_Time (datetime)
I want to be able to calculate total duration time(in hours) that EACH MACHINE had a ticket open...but here is the tricky part. The total duration time that a machine had ticket open has to encompas any tickets that may fall in the same time period. For example:
If Machine A has a ticket open at 8:30 and the ticket is closed at 10:00. Meanwhile, Machine A had another separate ticket open at 9:30 which was closed at 10:30. In this case, the total duration time for this machine would be from 8:30 to 10:30 for a total of 2 hrs duration time.
Can anyone help me get started in tackling this problem or provide any examples?
Code:
CREATE TABLE [dbo].[DigiTracker](
[DigitrackID] [int] IDENTITY(1,1) NOT NULL,
[contact_id] [int] NOT NULL,
[Code]....
-- not accurate b/c it returns 0 for all TimePerPageSec
SELECT DATEDIFF(second,min(createDt),max(createDt)) AS TimePerPageSec
FROM DigiTracker
GROUP BY contact_id, ZinePageNumber
time spent (in seconds) between each record
Hi guys, I am having difficulty calculating the time duration between receiving process to shipping process.
I have a table that consists of: Order#, Processes, Time_In, Time_Out.
Order# can be 1, 2, 3, 4, 5.
While at the same time Order# 1 can go through more than one process, i.e.: Receiving, VisualTest, MechanicalTest, ..., Shipping.
Every Order# does not necessarily goes through all processes, but surely they will go through receiving process and shipping process.
For each process we will have recorded time when the order# comes in and when it finishes with each process.
I need to calculate the length of time from Time_In from Receiving to Time_Out in Shipping.
I.E.:
Order# | Process | Time_In | Time_out
1 | Receiving | 2007-12-1 10:00:00.000 | 2007-12-1 10:10:00.000
1 | Incoming Q.A. | 2007-12-1 10:40:00.000 | 2007-12-1 11:42:00.000
1 | Visual Check | 2007-12-2 08:10:00.000 | 2007-12-2 11:00:00.000
1 | Shipping | 2007-12-2 11:20:00.000 | 2007-12-2 11:52:00.000
2 | xxxxx | xxxxx | xxxxx
2 | xxxxx | xxxxx | xxxxx
2 | xxxxx | xxxxx | xxxxx
Please help.
Thanks in advance.
Hi,I have a table called Bookings which has two important columns;Booking_Start_Time and Booking_End_Time. These columns are both of typeDATETIME. Given any day how can I calculate how many hours are availablebetween the hours of 09.00 and 17.30 so a user can see at a glance how manyhours they have unbooked on a particular day (i.e. 8.5 hours less the timeof any bookings on that day), can this be done with a queryor do I have to work it out in my code?Thanks for your help
View 2 Replies View RelatedHi guys, I am having difficulty calculating the time duration between receiving process to shipping process.
I have a table that consists of: Order#, Processes, Time_In, Time_Out.
Order# can be 1, 2, 3, 4, 5.
While at the same time Order# 1 can go through more than one process, i.e.: Receiving, VisualTest, MechanicalTest, ..., Shipping.
Every Order# does not necessarily goes through all processes, but surely they will go through receiving process and shipping process.
For each process we will have recorded time when the order# comes in and when it finishes with each process.
I need to calculate the length of time from Time_In from Receiving to Time_Out in Shipping.
I.E.:
Order# | Process | Time_In | Time_out
1 | Receiving | 2007-12-1 10:00:00.000 | 2007-12-1 10:10:00.000
1 | Incoming Q.A. | 2007-12-1 10:40:00.000 | 2007-12-1 11:42:00.000
1 | Visual Check | 2007-12-2 08:10:00.000 | 2007-12-2 11:00:00.000
1 | Shipping | 2007-12-2 11:20:00.000 | 2007-12-2 11:52:00.000
2 | xxxxx | xxxxx | xxxxx
2 | xxxxx | xxxxx | xxxxx
2 | xxxxx | xxxxx | xxxxx
Please help.
Thanks in advance.
I have data in which i need to calculate employees working hours for a day...
name time in_out
manisha 2011-01-01 9:30:00.000am 1
manisha 2011-01-01 10:30:00.000 0
manisha 2011-01-01 10:45:00.000 1
manisha 2011-01-02 1:00:00.000am 0
How can i calculate time in that two dates as 1 is for entry an 0 is for exit..
Hi all,
Thanks for setting up such a great site and forum.
Here is my problem:
I have a table like the following in SQL Server 2005:
order | taskid | main_person | temp_person | start_assign_date
1 | 3 | John | John | 2008-01-01 10:20:22
2 | 3 | John | Joe | 2008-02-05 15:20:22
3 | 3 | John | John | 2008-02-07 20:25:20
4 | 6 | Joe | Joe | 2008-01-01 10:20:22
5 | 6 | Joe | Mike | 2008-02-01 10:20:22
6 | 10 | Doug | Doug | 2008-01-01 10:20:22
7 | 7 | Russ | Russ | 2008-02-01 11:20:22
8 | 7 | Russ | Mike | 2008-02-08 12:20:22
9 | 7 | Russ | John | 2008-02-10 20:05:12
It was made to record who was in charge of a specific task at a specific time. Each task has its own main responsible person and some substitutes for that person as Temporary Persons (who did the task while main person was away). The Main Person's name is in the temp_person column when he is doing the task by himself.
I'd like to generate a report that shows:
- in a specific time period
- which persons were in charge of a specific task and
- for how long
Something like this:
From 2008-##-## to 2008-##-##
Task 3 - John - 15 days
Task 3 - Joe - 5 days
Task 6 - Joe - 18 days
Task 6 - Mike - 2 days
Task 10 - Doug - 20 days
I have some ideas to do that when there are both start and end dates for every record but I couldn't find a way to use the next assignment start date for each task, as the end date for its previous record (in that task group) to calculate the duration for that record.
I can group the tasks and users and put them in the chronological order but I can't indicate the next start date as the end date for the previous record (in specific task group) to use the date difference functions.
Any hint or comment would be appreciated.
Thanks
Sami
I have a data set like so:UTC_TIME Timestamp NodeID Message FlagLineStation11/19/2005 10:45:07 1132397107.91 1 3 5 1028103411/3/2005 21:05:35 1131051935.20 2 3 5 1009104311/25/2005 21:12:16 1132953136.59 3 3 5 10371049I added the UTC_TIME column in as aconversion of the unix timestamp inthe TIMESTAMP column.Keeping things simple and straightforward, I need to be able tocalculate the difference from one record to the next (ordered byTIMESTAMP or UTC_TIME) and output the result into another column in thetable.NODEID is the unique id.First, what is the function to do so if, say, I only wanted tocalculate the difference between 2 records as just a basic SELECTstatement. That way I can answer quick question based on any one or twoNODEID's.Second, how would I further that to continually calculate (as statedabove)?WOuld this be a stored procedure? A trigger? A cursor?I am learning as I go here. Any help is greatly appreciated.R.
View 4 Replies View Relatedselect TOP 10 rec_id,trans_id,number_id,card_no,message_id,trans_datetimefrom [dbo].[trans_log]
order by trans_datetime desc101, 1,34343, 99999, 200, 2015-11-23 12:27:25.710101,2,34343,99999,210,2015-11-23
12:27:26.710102,3,43434,88888,200,2015-11-23 12:28:26.714102,4,43434,88888,233,2015-11-23 12:28:27.710expected result:34343,99999,datediff(ss,'2015-11-23 12:27:26.710','2015-11-23 12:27:25.710') --difference between row 2 and row 143434,88888,datediff(ss,'2015-11-23 12:28:26.714','2015-11-23 12:28:27.710') --
difference between row 4 and row 3difference between row 6 and row 5...In the above query, I always want to find the difference in transaction date time between second and first row in a moving window.I have the unique id as rec_id to compare the next row with the previous row.
Calculating time between two date In Sql Server 2005help me ..
View 3 Replies View RelatedI am using MS SQL Server 2000.
I have 4 text fields
1. event begin date
2. event begin time
3. event end date
4. event end time
I have to find the day and time difference in months days hours and minutes between the event begin date & time and the event end date & time – The event begin date and event end date are char(8) & event begin time and event end time are char(4) – with military time. I would need to combine the event begin date & event begin time to get the event begin date & time and the same for the event end date & time.
If the values of the 4 text fields are
event begin date = ‘20070207’, event begin time = ‘2015’, event end date = ‘20070208’, event end time = ‘0105’, the difference should be 0 month 0 day 4 hours 50 minutes.
Can somebody please help with MS SQL Server 2000 syntax?
I have a requirement to calculate the total outage time, based on logged fault tickets, of network nodes. Basically, multiple tickets may be raised for a single node and those tickets could overlap or sequence over a given period; the task here is to calculate the total time (hh:mm) of the outage in the period.
Ex:
3 tickets raised for a node outage over, say, a 48 hour period. Ticket 1 (spanning a total of 5 hours) overlaps with ticket 2 (spans 3 hours) by 1 hour; ticket 3 starts 5 hours after ticket 2 and spans 1 hour. Total outage time on the tickets is 7hrs + 1hr (T1+T2 minus the 1hr overlap) and the full time of T3.
In summary, it's calculating the total ticket time, allowing for overlaps of tickets, etc.
I have a table that contains an employee id and dates signifying time periods that those employees were working. I need to calculate anniversaries, such as 20 year, which are the sum of all periods spend working projected out to 20 years. For example,
emp_idstart_date end_date
1001 1998-01-01 2003-06-21
1002 1999-05-23 2008-03-28
1001 2004-08-19 NULL
1003 2004-10-12 2006-07-25
1004 2005-04-28 NULL
1002 2008-11-02 NULL
1003 2009-05-17 NULL
The periods in which the employees were inactive (the time period between active ranges) would push back their anniversary date, obviously. I'm only concerned with employees that are currently active (ie. the most recent record has a NULL end date). I thought about trying to use datediff to calculate the time between active periods, but I'm not sure how to go about doing it.
I am setting up a monitor to alert me if an SQL job has failed in the "last 20 minutes". This should run 24 hours a day, 7 days a week. My query looks something like this.
select * from TALMAIN.msdb.dbo.sysjobhistory where job_id = '7139D5D1-CD88-46E8-8324-5D5A0D8D3A27' and run_status <> 1 and
DATEPART(YYYY,GETDATE()) = substring(convert(char(8),run_date),1,4)and
DATEPART(MM,GETDATE()) = substring(convert(char(8),run_date),5,2) and
DATEPART(DD,GETDATE()) = substring(convert(char(8),run_date),7,2)and DATEPART(HH,GETDATE()) = substring(convert(char(8),run_time),1,2)and (DATEPART(MI,GETDATE()) - substring(convert(char(8),run_time),3,2)) <= 20.
The run_date and run_time columns in msdb..sysjobhistory are stored as integers. Tried a couple of things, but I am unable to convert both of them to datetime data type. The last conditions in the above logic hold true for only "2 digit" hour and minute values.
DATEPART(HH,GETDATE()) = substring(convert(char(8),run_time),1,2)and (DATEPART(MI,GETDATE()) - substring(convert(char(8),run_time),3,2)).
What about time values like 00:05 AM and single digit time values like 1:00 AM and 9:05 AM, for example?. I pasted some sample run_date and run_time values from sysjobhistory below.
run_date run_time
2006122821510 -- 02:15:10 AM (how to get the minute count?)
2006122821510 -- 02:15:10 AM (same as above)
20061227233014 -- 23:30:14 PM (this is strt forward)
20061227233014 -- 23:30:14 PM (same as above)
200612273016 -- 00:30:16 AM (how to get minute count?)
200612273015 -- 00:30:15 AM (how to get minute count?)
Is there a simpler logic to achieve this? Hope I was clear, else let me know. Please advise. Thank you.
I'm trying to find a solution to for a report i am building and was hoping that some of you will share your expertise with me. Basically, I need to work out how long an Incident Ticket was suspended (ie it's status is "on hold").
The data is stored something similar to the following...
Ticket Date Status
------ ---- ------
333 14/03/2005 10:24:19 "to on hold"
333 14/03/2005 15:23:01 "from on hold"
334 14/03/2005 11:14:11 "to on hold"
334 14/03/2005 16:26:15 "from on hold"
335 15/03/2005 10:10:15 "to on hold"
335 15/03/2005 11:15:35 "from on hold"
335 15/03/2005 13:26:10 "to on hold"
335 15/03/2005 14:30:59 "from on hold"
335 16/03/2005 14:00:05 "to on hold"
335 16/03/2005 16:45:15 "from on hold"
336 16/03/2005 10:10:15 "to on hold"
336 16/03/2005 12:45:12 "from on hold"
This is the result i'd like to see....
Ticket Start Hold End Hold Time Suspended
------ ---------- -------- --------------
333 14/03/2005 10:24:19 14/03/2005 15:23:01 datediff(...
334 14/03/2005 11:14:11 14/03/2005 16:26:15 datediff(...
335 15/03/2005 10:10:15 15/03/2005 11:15:35 datediff(...
335 15/03/2005 13:26:10 15/03/2005 14:30:59 datediff(...
335 16/03/2005 14:00:05 16/03/2005 16:45:15 datediff(...
336 16/03/2005 10:10:15 16/03/2005 12:45:12 datediff(...
Has anybody done something along the same lines? If so, could you point me in the right direction?
Thanks in anticipation
Jon
We are maintaining 3 Shifts in our database. Problem in maintaining date and time for 3rd Shift. For example, today date is 13th July and third shift timing is 11 PM - 7 AM. Then I have to display the beginning date as 13/07/2015 11 PM and end date as 14/07/2015 7 AM. Please find the data(in seconds) available in database which I need to use for my calculation.
Date(Fcreacion)
Start time in Seconds(Hcreacion)
End time in seconds(Hcerrar)
turno(Shift)
[code]...
We have a proc that runs nightly which updates stats. For each database it will run dbcc updateusage on each table, then then sp_updatestats on the database itself.
This process normally takes about an hour, but recently the time has gone up dramatically.
I am looking at ways of making the run faster. One suggestion was to split the work and have it run in parrallel, with multiple procs all doing the same job but on different databases. So for example, I could have a proc that would determine which databases would take the longest to process, and then call 3 different copies of our update proc, each getting a different set of databases to process.
If I went this route, how could I determine which databases would take the longest to complete this process? I'm investigating determining this from sysindexes' rowmodctr, or maybe just database size?
Any suggestions on how I could get an estimate of which dbs would be the most costly to update stats? This is for SQL Server 2000.
Thanks
I have a requirement to be able to calculate the transit time between international locations when I have the flight departure time and flight arrival times and departure and arrival locations.
We have a problem though, in that the datetime stored are local times, and the journeys can involve crossing the international date line in either direction, so it is possible for the arrival time to be earlier than the departure time!
To give a famous example, if you flew Concorde from London to Washington, you could depart at 10am on the 1st of June (London time) and arrive at 8.00am on 1st June (Washington time)
Even worse, you could leave Brisbane at 2.00 am on the 1st June, cross the International Date Line and arrive at San Francisco at 23:00 on 31st May!
If I start a long running query running on a background thread is there a way to abort the query so that it does not continue running on SQL server?
The query would be running on SQL Server 2005 from a Windows form application using the Background worker component. So the query would have been started from the background workers DoWork event using ado.net. If the user clicks an abort button in the UI I would want the query to die so that it does not continue to use sql server resources.
Is there a way to do this?
Thanks
Hi. I'm trying to calculate the total number of cases that more than 4 events. This is my query:
select count(defendanteventpros.vbkey) as countcase from defendanteventpros
where exists (select * from defendanteventpros where eventid=2 and eventdate between '1/1/2007' and '12/31/2007')
having count(defendanteventpros.vbkey)>4
The defendanteventpros table has a vbkey (primarykey) eventid (type of event) and an evetndate (when the event takes place).
What I'm trying to find is how many cases had 4 or more events and were received (eventid=2 from above) between 1/1/2007 and 12/31/2007.
I keep getting a big number that I know is not correct. I would appreciate any help anyone can offer! Thanks!
AA Guyz i want to calculate class position of students from a table.Sample data is as follows...Roll # - Name - Marks1 - ABC - 602 - DEF - 603 - GHI - 574 - JKL - 555 -MNO - 506 -PQR - 53The query should return the following result.Roll # - Name - Marks - POSITION1 - ABC - 60 - 12 - DEF - 60 - 13 - GHI - 57 - 34 - JKL - 55 - 45 -MNO - 50 - 56 -PQR - 53 - 6I want query in MS SQL Server 2000
View 1 Replies View RelatedWanted to verify how I would run a replace...it's actually my first time doing a replace, but figure it's worse to screw this up than just a simple SELECT :)
The table/field is:
SOHeader.ShiptoID
I need to go through and replace only values which are equal to '9999' with the word 'DEFAULT' instead for all rows in that column.
Hello,
If my SSIS runs every day, how can I "know" that I'm running it for the first time?
I need an SQL Select1 statement to execute the first day that my flow starts (to get all the old data) and after that SQL Select2 statement should always execute (to get the latest data).
How is this possable?
Thank you.
Hi there!,
Problem: I schedule a job that calls a stored procedure which loads around 1.5 million records. The Job takes 19 hrs to complete. However, if i run that stored procedure manually in Query Analyser it takes only 45 minutes..
Did anyone faced this problem? Is this known problem..Any suggestions/recommendations?
thank you.
regards,
Nana
Hi
Is it possible for me to run an update syntax at a certain time say midnight for example?
I'm trying to update a bit field in my table (which acts as a checkbox in my Access front end), but only if three date fields are before todays date. The dates in question are in two other tables.
If so how would I go about doing this?
Thanks
I am re-writing a old query that update's it's value based on values at run time. Is there anyway to accomplish the following query where column s1.AI referances the values that were updated during run-time.
I want to avoid a Loop (i.e. cursor or a CTE).
Please help!
Declare @Stage Table(StartDate datetime,BenefitInterestID INT PRIMARY KEY, Amount MONEY, InterestAmount MONEY, Interest DECIMAL(10, 4), ai DECIMAL(10, 4))
Insert Into @Stage
Select
convert(datetime,'2006-12-01 00:00:00.000',101) as StartDate,1 as BenefitInterestID,1701.00 as amount,79.605 as InterestAmount ,0.1000 as Interest,0.0000 as ai
Union all
select '2007-12-01 00:00:00.000',2,172.80,7.92,0.0500,0
Union all
select '2008-12-01 00:00:00.000',4,0.00,0.00,0.0700,0
UPDATEs1
SETs1.ai = s1.Interest * coalesce((SELECT SUM(coalesce(s2.Amount,0) + coalesce(s2.InterestAmount,0)+coalesce(s2.ai,0)) FROM @Stage AS s2 WHERE s2.StartDate < s1.StartDate ),0)
FROM@Stage AS s1
select * from @Stage
My desired Results are
2006-12-01 00:00:00.00011701.0079.6050.10000.0000
2007-12-01 00:00:00.0002172.807.920.050089.0303
2008-12-01 00:00:00.00040.000.000.0700143.5300
But I am geting
2006-12-01 00:00:00.00011701.0079.6050.10000.0000
2007-12-01 00:00:00.0002172.807.920.050089.0303
2008-12-01 00:00:00.00040.000.000.0700137.2928
Due to as you can see on row 3 that the amount does not factor in the previous Years ai column when I sum, due to the update takes place at runtime.
Please help!
I have several sequence containers in one package that fire off execute package tasks. I would like each of the sequence containers to start at the same time when the job starts running. However when I set them up to do that, i get an error that the variable cannot be read because it is locked. I have the variables setup as readonly so not sure why they are being locked. When I run the package and have each sequence container fire off after the previous one ends it runs fine.
Any ideas on how to get around this?
Thanks!
SELECTÂ
  CONVERT(VARCHAR(10),attnc_chkin_dt,101) as INDATE,
  CONVERT(VARCHAR(10),attnc_chkin_dt,108) as TimePart
FROM pmt_attendance
o/p
indate   04/18/2015
time part :17:45:00
I need to convert this 17:45:00 to 12 hours date format...
Hi,
I have a table which has a few fields, one being "datetime_traded". I need to write a query which returns the row which has the closest time (down to second) given a date/time. I'm using MS SQL.
Here's what I have so far:
Code:
select * from TICK_D
where datetime_traded = (select min( abs(datediff(second,datetime_traded , Convert(datetime,'2005-05-30:09:31:09')) ) ) from TICK_D)
But I get an error - "The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.".
Does anyone know how i could do this? Thanks a lot for any help!