HI,
I want to know if there's an easier way to do a calculation on the remaining total of the months. For example: month 09 would be (total *3 ) because 9+3 = 12 and there are 12 months in a year.
month total
01 2217.3700
02 2187.6600
03 2243.6500
04 2216.1000
05 2374.4200
06 2296.2200
07 2266.6000
08 2164.2600
09 2085.2400
I have the following table
FeedBack Type Date
test2 positive 03/15/08
tes3 negative 03/01/08
.. ....
in my page i need to select the number of negative/positive comments within the last
1 month, 6 months, 12 months
How can I accomplish that?
thanks
I have created calcalated measures in a SQL Server 2012 SSAS multi dimensional model by creating empty measures in the cube and use scope statements to fill the calculation.
(so I can use measure security on calculations
as explained here  )
SCOPE [Measures].[C];
THIS = IIF([B]=0,0,[Measures].[A]/[Measures].[B]);
Hi I am having to convert some oracle reports to Reporting Services. Where I am having difficulty is with the
calculations.
Oracle
TO_DATE(TO_CHAR(Visit Date+Visit Time/24/60/60,'DD-Mon-YYYY HH24:MISS'),'DD-Mon-YYYY HH24:MISS')
this is a sfar as I have got with the sql version
SQLSERVER2005
= DateAdd("s",Fields!VISIT_DATE.Value,Fields!VISIT_TIME.Value246060 )
visit_date is date datatype visit_time is number datatype. have removed : from MI(here)SS as was showing as smiley.
using:
VS 2005 BI Tools
SQLServer 2005
I have two SQL tables
Coupon and Coupon CouponStore
In Coupon there is a column of CouponID and in CouponStore the same column name.
Also in CouponStore there is a column called StoreID that has the value of each store 1, 2, 3 and 4.
How would I write a script to map any CouponID in the Coupon table to each Store Value that are not already mapped to a StoreID?
recently i noticed that my trans Log size is not increasing(it is constant) , but the databse size is increasing at high speed.
why is it so? earlier the reverse used to happen i.e databse size increased only after a certain period. and log size increased at const. rate.
I have already created Tran. Replication for one database and it is working fine. But i have added 3 tables to the database and i want to do replication for that tables with same publications . I mean i can go to Publishers Properties and add articles but the problem is:
1)When i run the snapshot agent,it creates the snapshot whole database which is bigger in size .
2)Is there a way i can run snapshot agent for remaining articles in same publication.
3)How to do it step by step
Any help will be appreciated
Thanks
Experts
Hello,
I need to pull records from single table such that I get a subset defined like this:
(
acctcode = 'xh364'
and
product = 'T&E'
)
And return all of the rest of the records:
(
acctcode = '%'
and
product = '%'
)
Can I do this within a WHERE clause, or will this require CASE / ELSE? There will be other specific acctcode/product rules that will be added later. I could do this with a UNION, but I need to avoid that if possible.
Thank you for your help!
cdun2
Hi
I have seen the threads already in here about connections and SQL Server but I too am having a connection pool problem.
I am explicitly making a connection, creating a command object, executing a datareader then closing the command and then disposing the connection. The connection just prior to the dispose is definately closed.
However when I do an sp_who in SQL Server the connection is still listed. I have a connection timeout of 30 seconds, so I am considering reducing this to 5 seconds but dont wish to. So therefore when a process is called repeatedly instead of using an existing connection in the pool, it thinks that this connection is still active and therefore creates a new connection. Because all of this is in an ascx, I cant code for one connection to stay open for all 30 instances of the control.
This is a problem because I am creating controls at run time and using page.databind and at that point, I exceed the connection pool and therefore the site crashes out to the "SQL Server Timeout" error.
Anyone else seen this?
Hi,
My replication application need to be able to skip the from-last-stop remaining logs (that means to skip the logs generated from the last stop time of my replication application), how can i realize it? thanks.
I have a table 'library' with two columns
user_name, access_time
every user is having more than 500 entries, i want to keep only top 50 records for every user and delete the remaining records.
Hello everyone,
I have a package that extracts data from a Flat File. If any errors or truncation occur during the extraction of the input data, the package should fail. All fields that have erroneous values should be reported in the log file.
My Solution:
- I have created a Data Flow Task that contains a Flat File Source Adapter and a dummy destination.
- I have left the default "Error Output" configuration of the Flat File Source adapter, namely if a truncation or an error occur for a certain column, then the reaction is "Fail Component".
Problem:
This configuration gives me only the first erroneous column in the row being processed.
Question:
Is it possible to make the Flat File Source adapter continue parsing the current row before it fails? This way, I would be able to get all the erroneous columns in the row in one shot.
Thanks in advance...
Samar
I have a table with about half a million records, each representing a patient in my county.
Each record has a field (RRank) which basically sorts the patients as to how "unwell" they are according to a previously-applied algorithm. The most unwell patient has an RRank of 1, the next-most unwell has RRank=2 etc.
I have just deleted several hundred records (which relate to patients now deceased) from the table, thereby leaving gaps in the RRank sequence. I want to renumber the remaining recs to get rid of the gaps.
I can see what I want to accomplish by using ROW_NUMBER, thus:
SELECT ROW_NUMBER() Over (ORDER BY RRank) as RecNumber, RRank
FROM RPL
ORDER BY RRank
I see the numbers in the RecNumber column falling behind the RRank as I scan down the results
My question is: How to convert this into an UPDATE statement? I had hoped that I could do something like:
UPDATE RISC_PatientList_TEMP
SET RRank = ROW_NUMBER() Over (ORDER BY RRank);
but the system informs that window functions will only work on SELECT (which UPDATE isn't) or ORDER BY (which I can't legally add).
Hi,another problem I have is that have compounded fields in my sql table.Exampleproduct@customerI need a simple function to return "customer", so it should return the valueafter "@", unfortunate "@" will sometimes be character number 6, sometimescharacter number 7 etc.regardsJorgen
View 1 Replies View Related
Hi All,
I my requirement I need to read all the files from folder (one by one) and insert data from those files into the database table . I am facing one issue here . If suppose while executing if any of the file fails its not executing the other files. Package stops execution.
I cannot use Redirect rows option beacuse as per requirment if file has some Data problem , I am suppose to ignore the file instead of Data Rows.
Is there is any property in for each file task .....kindly suggest
Regards
Shagun
I need to get all the data based on the user selection of the months. So, I will provide a dropdown will all list of the months. When user pick the month, for example January, then I will show all the invoice on January. How to get the month of the year in the where clause in T-SQL?
TIA
I have a question i am confused very much with i am doing on MTD Average , i really need some help with code.
the logic behind the code is
3 MTD should be the past two completed months as well as the dates in the current month as well. So taking the example above – if the reporting period for Feb was 01/30/2007 to 02/27/2007, and March was 02/28/2007 to 03/27/2007, the 3 MTD should then be the average from 01/30/2007 to 04/10/2007.
This code does not actually gives me the exact value, please advise on any correction to the code , or a new way to write the code.
Avg
(
[Time].[Month].CurrentMember.Lag(3) :
[Time].[Month].CurrentMember,
[Measures].[A1_Avg]
)
Hi, I am trying to determine the amount of months between today and adate stored in the database. But I cannot seem to figure out get thedifference between the two dates. Thanks in advance.
View 2 Replies View RelatedHi all,How to get the date from the 3 months ago? So, if user enter a date (10/10/2006), how can I get to 07/10/2006.Thanks in advance...
View 3 Replies View RelatedHi All,
I provided the client with the dropdownlist which lists all the months (january - december). This input will be used to filter in the invoiceDT.
How can I write the query where clause to compare the invoiceDT (mm/dd/yyyy) into this input which is only number 1 through 12?
TIA
I have a stored procedure that I want to pass in a number of months and use it in my where caluse. I need to minus the number of months that as passed in by @TaskMonths.
But it is minusing days not months.
@TaskMonths intWHERE (tblTasks.Caller = @Caller) AND (tblTasks.DueDate BETWEEN CONVERT(varchar, GETDATE() - @TaskMonths, 101) AND GETDATE()) I apprecaite any help.
I have records in a table and 1 column is in the smalldatetime format which stores the date in the format "2004-09-22",2004-09-20",2004-09-12",2004-08-04" etc etc.
Can anyone tell me how to craft an SQL statement so that i can retrieve records for a certain month.For example,if i want to retrieve records for the month of September,i would get "2004-09-22",2004-09-20",2004-09-12" in results.
SELECT K.TRANS_TYPE,K.COMPANY,K.DIVISION,K.SALES_FORCE,K.SALES_LINE,K.SALES_REGION,K.SALES_ZONE,K.FORECAST_ DATE,C.STATISTICS_PERIOD,K.PRODUCT_NUMBER,
K.CUSTOMER_CODE,K.WAREHOUSE,0,0,0,K.FORECAST_QTY
FROM KPI_SIGNOFF AS K inner join ROUNDED_CALENDAR as C on K.FORECAST_DATE
between C.START_DATE and C.END_DATE
Hi this is the code that I am using to populate a table let us call new_table.
However what I would like to do is get the max forecast date and get the statistics_period for that max forecast date.
Once I get that I would set that as my current statistics period.
Then I want to create a new column in the same new_table call stat_period-1, which would be the one period back.
Please note that the statistics period is like the months 1 – 12.
Does not go higher that 12 and does not go lower than 1.
So for stat_period-1 when statistics period is equal to 1 it would have to be set to 12.
This is what I want but do not know how to place this into the code, please help me with this.
THanks
Hi All,
I need to display the rent not paid months in the year. How can I form the query?
Help me.
Kamal.
Hi Friends,
i need a Month name between 2 dates...
Example :
If i give start date(MM/dd/yyyy) is 03/20/2008
and End Date(MM/dd/yyyy) is 05/24/2008)
The Output Should be
March,
April,
May
How can i get this...
Thank you...
I am wondering if someone maybe able to help me, I am needing to order my data via months in the calendar sense not alphabetically, below is what I currently have, but it only does it alphabetically.
select to_char(created,'yyyy-Mon'), matdesc, count(*)
from test
group by to_char(created,'yyyy-Mon'), matdesc
order by to_char(created,'yyyy-Mon') desc
any help would be greatly appreciated
Thank you
Stephen
I have a View there I need my criteria to select 13 months from previous month.
Example. This is 3/1/2007 - I need to query 2/1/2007 to 2/1/2006.
Hi all.
I have probs on grouping by...
Sample data...
table - hrEmpPayrollSummary
empno period1 period2 pagibig_share
1 1/1/2007 1/15/2007 2000
1 1/16/2007 1/30/2007 5000
1 2/1/2007 2/16/2007 6000
2 1/1/2007 1/15/2007 8000
3 1/16/2007 1/28/2007 9000
3 12/1/2007 1/15/2007 10000
3 12/1/2007 12/15/2007 10000
expected result...
result for the year 2007
empno january february march april may june july august september october november december
1 7000 6000 0 0 0 0 0 0 0 0 0 0
2 8000 0 0 0 0 0 0 0 0 0 0 0
3 9000 0 0 0 0 0 0 0 0 0 0 10000
-Thanks
-Ron-
"A logician trying to explain logic to a programmer is like a cat trying to explain to a fish what it's like to get wet."
Hi i need a sql stored procedure below, this returns 2 columns of data, what i now need is to display the months as columns
ie.
TotalQty - OL_St_Code - Jan - Feb - March
then each month column shows a TotalQty for that month, do i need a query of query? if so how would i go about this
select count(OL_Qty)as TotalQty, OL_St_Code
from dbo.X_TBL_ORDER_LINEWEB LW
LEFT JOIN dbo.X_TBL_ORDERWEB OW ON OW.O_ID = LW.OL_O_ID
WHERE MONTH(O_Date) Between '11' AND '12'
group by Month(O_Date), OL_St_Code
How can I get the date of the first day of the month of3 months ago in one statement ?(And with no time in it ??)Arno de Jong, The Netherlands.
View 1 Replies View RelatedHi,
I need to count last 3 months records. The query I'm trying to use was based on last 8 days. How can I use this query in months and not days? Or should I use a new query?
Code Snippet
SELECT COUNT(Column1) AS [Nº de Cartões], Column2 AS [Tipo de Cartão], Column4 AS Periodicidade
FROM main_client_file
WHERE (Column9 >= DATEADD(Day, DATEDIFF(Day, 0, GETDATE() - 3), 0)) AND (Column9 <= DATEADD(Day, DATEDIFF(Day, 0, GETDATE() - 1), 0))
GROUP BY Column2, Column4
Thx.
Hi,
I want to select data from a table for last 13 months.
Can anyone tell me how to write the T-sql code for this?
The table looks like this.
FileMonth Type
2007-04-01 00:00:00.000 Total NULL 199886109.65
2007-04-01 00:00:00.000 Total Line 170724936.92
2007-05-01 00:00:00.000 Total Loan 29161172.73
2007-05-01 00:00:00.000 InstLend NULL 49780163.49
2007-06-01 00:00:00.000 InstLend Line 42450387.44
...........
So I wanna pull data from 04/01/07 to 04/01/08.
So I wanna write a query some thing like this.
Select *
from table1
where Filemonth BETWEEN PreviousMonth AND Last13thMonth
Thanks
Hi, I've just noticed that there is a proc in my database using a person's age in a where clause but it seems to be rounding the age. The idea is select records where the age (using the person's birthdate) is between @xMonths and @yMonths.
Code Snippet
select datediff(month, '4-30-2006', '4-1-2008');
Result: 24
If 4/30/06 is the birthdate and 4/1/08 is today, it needs to be 23 months. Can someone explain how it determines the month boundaries and how to exclude partial months?