I am trying to create a stored procedure to Call ALTER LOGIN based on the the username passed in. However, the Alter login statement chokes on any parameter. Is there a way I can alter sql logins from a web form ?
I try the following and it bombs
ALTER LOGIN @LoginName WITH PASSWORD = @Password
But this works
ALTER LOGIN 'TestUser' WITH PASSWORD = '123test'
I guess the alter login statement does not work with Parameters.
Any thoughts ?
I have seen alot of comments posted about an Issue in SQL2005 that no one at microsoft could really answer. If a user would try to alter his own login, it would fail stating a permissions error.
This is what I did to get it to work .
USE my_dataBase
GO
Alter Login [my_login] WITH PASSWORD = 'newpassword' OLD_PASSWORD = 'oldpassword'
In previous examples, people were trying to do an alter login without first narrowing it to the database.
If you do not include the USE statement it will fail.
Another thing to note is that they can only change certain things....they cannot turn off check_policy or check_expiration.
Happy Coding
In my SQL SERVER 2005, sa login is enabled, despite Windows Authentication mode being set.
When I'm trying to change it to disabled, I get the error "cannot alter 'sa' login. it doesn't exist or you don't have the permission"
How can I change the status?
The sa (system administrator) login seems to be disabled for my SQL Server 2005.
I don't have the permissions to change it from the "loging properties-tab".
And as mentioned in an earlier thread, my windows authentication doesn't work for 2005...
So, is there a way to enable the login for the sa user when your windows authentication is screwed up?
SQLCMD??
Regards,
JOHAN
Hi,
How can I alter the SQL Server user login id to a new login id globally so that the database objects which related to the old id will be tied to this new login id ?
Thanks.
Can the ALTER USER statement be used (without a hack like using EXEC) in a stored procedure? I know that the sp_password system stored procedure can not be. Additionally, it is being deprecated anyway. I guess what is boggling me about my attempts so far relate to the errors I am getting due to the user being specified not being in quotes in the syntax. All of the searching I have done so far have come up lame so far; the only examples I have found about it were in scripts that create other scripts for transferring users and other administrative tasks that would be run from the query window, but not from an application. To be complete as possible, here is an example of a script the returns errors:
ALTER PROC [dbo].[lbxChangePassword]
(
@loginid nvarchar(180),
@oldpassword nvarchar(40),
@newpassword nvarchar(40)
) AS BEGIN
IF @oldpassword = (SELECT password FROM contacts WHERE loginid = @loginid)
BEGIN
BEGIN TRANSACTION
UPDATE contacts
SET password = @newpassword
WHERE loginid = @loginid
ALTER LOGIN @loginid WITH PASSWORD=@newpassword OLD_PASSWORD=@oldpassword
END
ELSE
BEGIN
RAISERROR(N'The password you entered does not match your current password.', 16, 1)
RETURN
END
IF @@ERROR <> 0
BEGIN
RAISERROR(N'There was an error creating your new password.', 16, 1)
RETURN
END
COMMIT TRANSACTION
END
************
This returns:
Msg 102, Level 15, State 1, Procedure lbxChangePassword, Line 15
Incorrect syntax near '@loginid'.
Msg 319, Level 15, State 1, Procedure lbxChangePassword, Line 15
Incorrect syntax near the keyword 'with'. If this statement is a common table expression or an xmlnamespaces clause, the previous statement must be terminated with a semicolon.
************
If ALTER LOGIN isn't how to change the password, then please tell me what the correct practice of changing a password is. I want to use the CURRENT_USER keyword in my queries and want I can't finish setting that up until I have this resolved because users will need to change their own passwords through the application I am developing.
I typed the following in sqlcmd:
1> ALTER LOGIN [BUILTINAdministrators] WITH DEFAULT_DATABASE=master
2> GO
And I got this error:
Line 1: Incorrect syntax near 'LOGIN'.
Can you help me find the problem? Thanks
Hi All,
I would like to disable a user account from logging to the database. I would like to know the difference between deny connect to sql permission and disabling an account by alter login disable. Please advice. Thanks
Please Help!!
We have an application using SQLOLEDB connection to a SQL Server 2005 database. Per domain policy, the users are required to change their password every 60 days.
The accounts are established to 'Enforce password policy'.
When we try to execute the 'ALTER LOGIN' command to change the password, locks are being established and will not free the account without bouncing the instance.
After issuing the command, any interaction with the server using this UserID results in a "lock request time out" error 1222.
I have tried issuing this command using both the application and through SQLServer Mgmt Studio Express and the results are the same.
Any idea would be greatly appreciated.
Rusty Rickmon
I have dw schema in the database, owned by user dw.The login name is dw. The login had db_owner right in the database. The default schema for the login on the database is dw.Now Once I assign 'sysadmin' serverrole to dw login, I started seeing stored proc not found error, if try to execute stored proc without mentioning dw.spname;Also I am seeing table not found error while quering tables under dw schema, after the change.
View 20 Replies View RelatedI want to set up a database role so that users can use sp_readerrorlog through SSMS. It does a check on membership in the securityadmin role.
I have tested it and can see you can grant execute on xp_readerrorlog but the SSMS GUI uses sp_readerrorlog.
I thought I could create a user/certificate and add the signature to sp_readerrorlog but it's not permitted (likely because it's not a normal database object).
So the other solution is to add the users to the securityadmin role but then explicitly deny alter any login (best done with a custom server role in 2012+ but otherwise just manually in 2008). I tested this out and it works, I'm not able to alter any logins or increase my own permissions, I also did a check of what's reported from fn_my_permissions(null, null) and it shows minimal permissions like I'd expect.
Hi people,I?m trying to alter a integer field to a decimal(12,4) field in MSACCESS 2K.Example:table : item_nota_fiscal_forn_setor_publicofield : qtd_mercadoria integer NOT NULLALTER TABLE item_nota_fiscal_forn_setor_publicoALTER COLUMN qtd_mercadoria decimal(12,4) NOT NULLBut, It doesn't work. A sintax error rises.I need to change that field in a Visual Basic aplication, dinamically.How can I do it? How can I create a decimal(12,4) field via script in MSACCESS?Thanks,Euler Almeida--Message posted via http://www.sqlmonster.com
View 1 Replies View RelatedHi,
I am producing a php report using SQL queries to show the SLA status of our calls. Each call has response, fix & completion targets. If any of these targets are breached, the whole SLA status is set as 'Breach'.
The results table should look like the one below:
CallRef.
Description
Severity
ProblemRef
Logged
Date
Call
Status
SLA Status
C0001
Approval for PO€™s not received
2
DGE0014
05-01-06 14:48
Resolved
Breach
C0002
PO€™s not published
2
DGE0014
06-01-06 10:21
Resolved
OK
C0003
Approval for PO€™s not received from Siebel.
2
n/a
05-01-06 14:48
Investigating
OK
Whereas I can pick the results for the first 6 columns from my Select query, the 'SLA Status' column requires the following calculation:
if (due_date < completed_date)
{ sla_status = 'OK';
}
else sla_status = 'Breach';
The Select statement in my query is looking like this...
Select Distinct CallRef, Description, Severity, ProblemRef, Logdate, Status, Due_date, Completed_date;
The problem is that my query is returning multiple entries for each stage of the call (see below), whereas I just want one entry for each call, with SLA status 'Breach' if any of the stages for the call were out of SLA.
CallRef.
Description
Severity
ProblemRef
Logged
Date
Call
Status
SLA Status
C0001
Approval for PO€™s not received
2
DGE0014
05-01-06 14:48
Resolved
Breach
C0001
Approval for PO€™s not received
2
DGE0014
05-01-06 14:48
Resolved
OK
C0001
Approval for PO€™s not received
2
DGE0014
05-01-06 14:48
Resolved
Breach
Any help will be much much appreciated, this issue has been bothering me for some time now!!!
Hi,
Im getting this error when attempting to retrieve data from an sql database.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Cannot open database requested in login 'projectAllocations'. Login fails. Login failed for user 'sa'.
Source Error:
Line 13: objConn = New SqlConnection( "Server=LAB303-066NETSDK; Database=projectAllocations; User ID=sa;Password=mypassword")
Line 14: objCmd = New SqlCommand("SELECT * FROM project_descriptions", objConn)
Line 15: objConn.Open()
Line 16: objRdr = objCmd.ExecuteReader()
Line 17: While objRdr.Read()
Source File: C:finalyearproject2sample.aspx Line: 15
Please Help!! Im a beginner to this, so if anyone knows the answer, take baby steps when explaining. Thanks
Been looking through the forums for a solution to this problem.I already tried granting access through statements such as:exec sp_grantloginaccess N1'machineNameASPNET'But they don't seem to work.. i vaguely remember seeing somewhere a DOS command line statement that grants access to the ASPNET_WP and that fixed my problem before on another computer.. but this is a new computer and i forgot to write down the command.Can anyone help explain and propose a solution to my problem. Many thanxs.
View 9 Replies View RelatedI would like to add an Identity to an existing column in a table using astored procedure then add records to the table and then remove the identityafter the records have been added or something similar.here is a rough idea of what the stored procedure should do. (I do not knowthe syntax to accomplish this can anyone help or explain this?Thanks much,CBLCREATE proc dbo.pts_ImportJobsas/* add identity to [BarCode Part#] */alter table dbo.ItemTestalter column [BarCode Part#] [int] IDENTITY(1, 1) NOT NULL/* add records from text file here *//* remove identity from BarCode Part#] */alter table dbo.ItemTestalter column [BarCode Part#] [int] NOT NULLreturnGOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGOhere is the original tableCREATE TABLE [ItemTest] ([BarCode Part#] [int] NOT NULL ,[File Number] [nvarchar] (20) COLLATE SQL_Latin1_General_CP1_CI_AS NULLCONSTRAINT [DF_ItemTest_File Number] DEFAULT (''),[Item Number] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULLCONSTRAINT [DF_ItemTest_Item Number] DEFAULT (''),[Description] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULLCONSTRAINT [DF_ItemTest_Description] DEFAULT (''),[Room Number] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULLCONSTRAINT [DF_ItemTest_Room Number] DEFAULT (''),[Quantity] [int] NULL CONSTRAINT [DF_ItemTest_Quantity] DEFAULT (0),[Label Printed Cnt] [int] NULL CONSTRAINT [DF_ItemTest_Label Printed Cnt]DEFAULT (0),[Rework] [bit] NULL CONSTRAINT [DF_ItemTest_Rework] DEFAULT (0),[Rework Cnt] [int] NULL CONSTRAINT [DF_ItemTest_Rework Cnt] DEFAULT (0),[Assembly Scan Cnt] [int] NULL CONSTRAINT [DF_ItemTest_Assembly Scan Cnt]DEFAULT (0),[BarCode Crate#] [int] NULL CONSTRAINT [DF_ItemTest_BarCode Crate#] DEFAULT(0),[Assembly Group#] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULLCONSTRAINT [DF_ItemTest_Assembly Group#] DEFAULT (''),[Assembly Name] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULLCONSTRAINT [DF_ItemTest_Assembly Name] DEFAULT (''),[Import Date] [datetime] NULL CONSTRAINT [DF_ItemTest_Import Date] DEFAULT(getdate()),CONSTRAINT [IX_ItemTest] UNIQUE NONCLUSTERED([BarCode Part#]) ON [PRIMARY]) ON [PRIMARY]GO
View 2 Replies View RelatedI am using sql server ce.I am changing my tables sometimes.how to use 'alter table alter column...'.for example:I have table 'customers', I delete column 'name' and add column 'age'.Now I drop Table 'customers' and create again.but I read something about 'alter table alter column...'.I use thi command but not work.I thing syntax not true,that I use..plaese help me?
my code:
Alter table customers alter column age
I am using the MSDE to connect to my ASP.NET application. I get this error after clicking the login button of my login page. Anyone know why this would happen?
Thanks for any help,
Cannot open database requested in login 'DataSQL'. Login fails. Login failed for user 'serverASPNET'.
Hi guys,
If I have a temporary table called #CTE
With the columns
[Account]
[Name]
[RowID Table Level]
[RowID Data Level]
and I need to change the column type for the columns:
[RowID Table Level]
[RowID Data Level]
to integer, and set the column [RowID Table Level] as Identity (index) starting from 1, incrementing 1 each time.
What will be the right syntax using SQL SERVER 2000?
I am trying to solve the question in the link below:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2093921&SiteID=1
Thanks in advance,
Aldo.
I have tried the code below, but getting syntax error...
ALTER TABLE #CTE
ALTER COLUMN
[RowID Table Level] INT IDENTITY(1,1),
[RowID Data Level] INT;
I have also tried:
ALTER TABLE #CTE
MODIFY
[RowID Table Level] INT IDENTITY(1,1),
[RowID Data Level] INT;
hi,
so i have a new box and I'm trying to get my websites and SQL Server 2005 Standard Edition working on it, but the pages give me the following error when I try to load them:
"Cannot Open Database "XXXX" requested by login. The login failed. Login failed for user 'xxx'"
Everything seems exactly the same settings and user-wise from my old box to my new one, but nevertheless everything I've tried gives me the same error.
I've tried creating new users in SQL Server and giving them appropriate permissions to my database. I've even tried just using the built in 'sa' account. Nothing seems to change the error, except when I give it the incorrect password then it just says 'login failed'
This leads me to believe that i'm successfully logging into the SQL Server, but it doesn't want to give me access to the database I'm requesting access too. But "apparently" the account i'm using should have access to the database. If nothing else the 'sa' account should, but that didn't work either.
I'm stumped. Any ideas?
Hi I have asp.net2 app using SQLExpress which works fine in VS2005.
When I compile it and try to run it from IIS on the same machine using the same
sql server database with:
connectionstring="server=.SQLEXPRESS;Database=abc.mdf;Trusted_Connection=yes"/>
I get the following error.
Cannot open database abc.mdf requested by login. The login failed. Login failed for user 'machinenameASPNET'
Any help much appreciated
Thanks
David
Hi All
I am getting below error while
Error string: Cannot open database requested in login 'XXXXXXXXXXX'. Login fails.
what is possible casue for above problem.
Hi,
I have a script component. What it does, it queries the a table using a connectionstring assigned to it in the Connection Managers Editor (which is an ado.net adapter). this works fine when i'm using a windows login in the ado.net connection manager. But when i changed my connection to use SQL server login, I encounter this error:
OnError,,,Add new records to Dim_T_Status (Case),,,10/14/2007 5:54:47 PM,10/14/2007 5:54:47 PM,-1073450910,0x,System.Data.SqlClient.SqlException: Login failed for user 'CS_REPORT'.
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e)
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper90 wrapper, Int32 inputID, IDTSBuffer90 pDTSBuffer, IntPtr bufferWirePacket)
OnError,,,LOAD AND UPDATE OCEAN Dimension Tables,,,10/14/2007 5:54:47 PM,10/14/2007 5:54:47 PM,-1073450910,0x,System.Data.SqlClient.SqlException: Login failed for user 'CS_REPORT'.
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e)
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper90 wrapper, Int32 inputID, IDTSBuffer90 pDTSBuffer, IntPtr bufferWirePacket)
OnError,,,LoadOCEANDimensions,,,10/14/2007 5:54:47 PM,10/14/2007 5:54:47 PM,-1073450910,0x,System.Data.SqlClient.SqlException: Login failed for user 'CS_REPORT'.
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e)
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper90 wrapper, Int32 inputID, IDTSBuffer90 pDTSBuffer, IntPtr bufferWirePacket)
How to go about this?
cherriesh
Cannot open database "QuoteSystem" requested by the login. The login failed.Login failed for user 'NT AUTHORITYNETWORK SERVICE'.
Last time I recieved this error I had to add ASPNet, NTAuthority, and myWebSiteUsers USERS under the database properties-->permissions setting for the specific database I am trying to access with the website but this database(QuoteSystem) does not lists any of these objects so I can add them. Does anybody know what I have to do to fix this?
I am using SQL Server 2005.
Please, can anyone tell me why I am getting the undermentioned error message when I develop my application as an IIS Site in Visual Web Developer 2005 Express ? I have already developed and successfully tested it as a 'FileSystem Web Site' .I am using SQLSErver Express 2005 edition and have which I have installed along with the Northwind database as per the download instructions. My IIS software is version 5.1 which I have checked and it is configured to allow Integrated Windows Authentication. the relevant code is (1) web.config file connection strings
<connectionStrings>
<add name="NorthwindConnectionString"
connectionString="Data Source=.sqlexpress;Initial Catalog=Northwind;Integrated Security=True"
providerName="System.Data.SqlClient"/>
</connectionStrings>(2) the grid view control and sqldatasource
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="CategoryID"
DataSourceID="SqlDataSource1">
<Columns>
<asp:BoundField DataField="CategoryID" HeaderText="CategoryID" InsertVisible="False"
ReadOnly="True" SortExpression="CategoryID" />
<asp:BoundField DataField="CategoryName" HeaderText="CategoryName" SortExpression="CategoryName" />
<asp:BoundField DataField="Description" HeaderText="Description" SortExpression="Description" />
</Columns>
</asp:GridView>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:NorthwindConnectionString %>"
SelectCommand="SELECT [CategoryID], [CategoryName], [Description] FROM [Categories]">
</asp:SqlDataSource>This is the full error message and details:
Server Error in '/sqlservertest' Application.
Cannot open database "Northwind" requested by the login. The login failed.Login failed for user 'JERRY-3C9615BAAASPNET'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Cannot open database "Northwind" requested by the login. The login failed.Login failed for user 'JERRY-3C9615BAAASPNET'.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): Cannot open database "Northwind" requested by the login. The login failed.
Login failed for user 'JERRY-3C9615BAAASPNET'.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +684883
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +207
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1751
System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +32
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +601
System.Data.SqlClient.SqlInternalConnectionTds..ctor(SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +159
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +346
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +445
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +304
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +85
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1837
System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17
System.Web.UI.WebControls.DataBoundControl.PerformSelect() +129
System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70
System.Web.UI.WebControls.GridView.DataBind() +4
System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82
System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69
System.Web.UI.Control.EnsureChildControls() +87
System.Web.UI.Control.PreRenderRecursiveInternal() +41
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1787
Version Information: Microsoft .NET Framework Version:2.0.50215.312; ASP.NET Version:2.0.50215.312
All the logins with sysadmin role are locked out in one of the SQL server. Also in that instance Logon trigger is implemented which allows only certain users with Windows Authentication to logon.
This server is converted into single user mode by using command prompt. Now we are attempting to connect to SQLServer using command sqlcmd -S FTCPU3239 (since we do not have any other login) and create a new login with sysadmin role but are refused due to logon trigger. it says Login failed for login 'DomainNameUserName' due to trigger execution.
I have a server that has 20 databases . I have tested with few users with different level of access and all of them were able to connect to the server and also see, select, update , delete from a particular database which is kind of weird because they do not have a user login associated or mapped to that database. I checked and no user is part of any group in AD that would give them permission to connect . I need a query that would find the permission path of a user. I already queried with xp_logininfo but I am not getting any thing.
View 9 Replies View RelatedHi all,
Iam getting this error
System.Data.SqlClient.SqlException: Cannot open database "XYZ" requested by the login. The login failed.Login failed for user 'xyz-abcASPNET'.
when trying to open the page....
http://localhost:1807/projectname/WebFormName.aspx
as
http://localhost/projectname/WebFormName.aspx
Couldnt figure out the solution.Please help
Soujanya
Hi,
I just installed Visual web developper 2008 express with all options including SQL srvr express 2005!
This is from default iso image on the official website.
I create my first project and when I want to do ASP.NET configuration from web site menu, i got this error:
"Cannot open database "aspnetdb" requested by the login. The login failed."
I am just trying to learn here so i even did not create any dB or something, it is 1st time I run configuration to add security roles and users for testing!
I also un-installed all and re-installed, still the same...
pleas help and give me details as i am new.
kind regards,Golgot
Im running sql server 2005 and trying to connect from dreamweaver. What is causing this problem?
View 2 Replies View Related Error!!! 1>Cannot open database "intranet" requested by the login. The login
failed.Login failed for user 'RAGHAVEN-71AF9BASPNET'. Error!!! 2>
An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005, this failure may be caused by the fact that
under the default settings SQL Server does not allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL
Server) These both errors r coming simultaneously when start to debug only when i tried to retrive data from database ,
from past two days not able to work on database,plz
help me in solving this ,i tried everything what i know and even on
experts advice from recommended websites, forums and on google search..
I receive this error message occasionally in my ETL - usually when trying to pull data from our source system:
An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Login timeout expired". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Unable to complete login process due to delay in login response". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "TCP Provider: Timeout error [258]. ".
There is a setting in the connections manager, under the ALL tab, Initialization, Connect Timeout. It is set to zero, which would be the default. It appears (by looking at the timestamps in my error log) that the default is 15 seconds. If I change this to a higher value (60 seconds or so) should this fix the error?
Thanks,
Evan Black
I am getting the above error. On server1 I am running a dts package via a sql server job (sql server2005). This has been working perfectly for over a year. This package needs to access a database on server2. The database in question on server2 was recently restored from our produciton environment to refresh the data. Every since thsi time the job on server1 is failing with the above error.
Steps I have taken so far:
droped the user from server2 and recreated it
gave the user sysadmin rights on server 2 and server1