Call Csharp From Sql-Server
Sep 4, 2006Can I call a csharp method of my custom class from Sql-Server Stored Procedure?
If it's possible can anyone provide some sample code or the configuration required?
Thanks
ADVERTISEMENT
I Just Want One Entry For Each Call, With SLA Status 'Breach' If Any Of The Stages For The Call Were Out Of SLA.
Mar 19, 2008Hi,
I am producing a php report using SQL queries to show the SLA status of our calls. Each call has response, fix & completion targets. If any of these targets are breached, the whole SLA status is set as 'Breach'.
The results table should look like the one below:
CallRef.
Description
Severity
ProblemRef
Logged
Date
Call
Status
SLA Status
C0001
Approval for PO€™s not received
2
DGE0014
05-01-06 14:48
Resolved
Breach
C0002
PO€™s not published
2
DGE0014
06-01-06 10:21
Resolved
OK
C0003
Approval for PO€™s not received from Siebel.
2
n/a
05-01-06 14:48
Investigating
OK
Whereas I can pick the results for the first 6 columns from my Select query, the 'SLA Status' column requires the following calculation:
if (due_date < completed_date)
{ sla_status = 'OK';
}
else sla_status = 'Breach';
The Select statement in my query is looking like this...
Select Distinct CallRef, Description, Severity, ProblemRef, Logdate, Status, Due_date, Completed_date;
The problem is that my query is returning multiple entries for each stage of the call (see below), whereas I just want one entry for each call, with SLA status 'Breach' if any of the stages for the call were out of SLA.
CallRef.
Description
Severity
ProblemRef
Logged
Date
Call
Status
SLA Status
C0001
Approval for PO€™s not received
2
DGE0014
05-01-06 14:48
Resolved
Breach
C0001
Approval for PO€™s not received
2
DGE0014
05-01-06 14:48
Resolved
OK
C0001
Approval for PO€™s not received
2
DGE0014
05-01-06 14:48
Resolved
Breach
Any help will be much much appreciated, this issue has been bothering me for some time now!!!
SQL Server 2005, SQL Server Mobile, SQL Server Management Studio. Unsupported HTTP Function Call
Sep 5, 2005Hi All,
View 14 Replies View RelatedA Call To SQL Server Reconciler Failed. SQL Server 2005, SQL Server Mobile Merge Replication
Oct 2, 2005Hi,
View 36 Replies View RelatedSQL Server 2008 :: Restoring A Database / Server Using A Remote Server As The Service Call?
Jan 4, 2013if you can restore a database to Server B using Server A as the service. Meaning we would issue the command on Server A but somehow point to Server B as where we want the restore to happen.
The backup file would be in a location independent of both servers.
SQL Server 2014 :: Call For DB Backup For A Database On Another (linked) Server
Jul 8, 2015I have a sproc that will generate a dynamic call (and this must be done in a stored procedure),... Anyway the dynamic call I am having problems with is that I need to dynamically create a statement to backup a database. It works as long as the database is on the same server / instance as the stored procedure. I want to be able to from server/instance A create a command that does a backup of a database that is on server B. I just can't figure out the syntax for a database backup where the database is on another server.
Trying something like [ServerName].[DatabaseName] does not work...
SQL Server Call C++ Function?
Dec 11, 2001Hi,
Does anyone know if/how SQL server can call a function in a C++ library?
Cheers,
Xiaobing
Procedure Call Between Two Different SQL SERVER
Aug 1, 2006Hi,
I have two SQL SERVER server1 and server2. A server1's stored procedure should call server2's stored procedure. how can i do this.please explain me in detail.i am new to this concept.
VENKAT
Call .NET Web Service From SQL Server
May 3, 2004Hi,
I have a situation where I need to call a web service from the database (by an insert trigger on a table). Please let me know how I could do this.
Thanks in advance
Raj
It's Possible To Call A View From A Different SQL Server?
Nov 3, 2006dear friends,
It's possible to call a view from a different SQL Server? I need to create a connection inside one view from the first server to call the second server...
Thanks
Call A UDF From Another Server &&<&&> Authentication
Sep 28, 2006Hello
I'm trying to call a UDF from another server with the following command:
select i from openquery([10.0.10.240], '[survey].[dbo].[ufnGetAxis_Ana] as i')
error:
[OLE/DB provider returned message: Invalid authorization specification]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' IDBInitialize::Initialize returned 0x80040e4d: Authentication failed.].
Msg 7399, Level 16, State 1, Line 3
OLE DB provider 'SQLOLEDB' reported an error. Authentication failed.
Can someone give me some advice on how to pass username and password to access an object on another server?
Many thanks!
Call Web Service From Sql Server 2000 Job
Mar 5, 2007I would like to call a web service from a sql server 2000 s.proc/sql job, but if there is a better way please let me know. I'm using Captaris Workflow to create and manipulate workflow processes. I have a sql job that will create some pdf's. I want to call the web service that creates a new process in a step from that sql job. I have read about doing this with extended s.procs, but I'm trying to find any possible solutions. Essentially, the web method I want to call will insert several records into sql so I know I can at least do that. I would still like to know if I can make a call to the web service from the sql job. Thanks for any help.
View 1 Replies View RelatedHow To Call SQL Server 2005 From ASP.NET Application?
Apr 17, 2008I am trying to call a view that is already in SQL Server 2005 from my ASP.NET 2.0 application. I get the following error message:
The request for procedure 'vwMyView failed because 'vwMyView' is a view object.
I thought I could call a view the same way that I call a stored procedure but I guess I was wrong. How can I fix this?
Here is some sample code too:
Dim Results As DataSetDim Cmd As IDbCommand
Dim Adapter As IDbDataAdapter Results = New DataSet
Cmd = DB.CreateCommandCmd.CommandText = "vwMyView"
Cmd.CommandType = CommandType.StoredProcedure
Adapter = DataSource.CreateDataAdapter
Adapter.SelectCommand = Cmd
DB.Open()
Cmd.Connection = DB
Adapter.Fill(Results)
Cmd.Dispose()
DB.Close()
Return Results
How To Call A VB Program From A Trigger Of SQL Server
Feb 23, 2004Hi,
I have a VB program to sit somethere. I like to call that program with passing two parameters from a trigger on the SQL Server. The parameters are the contents of the table which the trigger is created on.
Is there any way to achieve that?
Thanks a lot!
Regards,
Kevin Jin
CAll Oracle Procedure From SQL Server
Jan 12, 2003I have been trying to execute Oracle Stored Procedure From SQL Server using Linked Server without luck. The scenario is explained in detail below ..
Environment :
SQL Server Version : 2000
OS : Win NT 4.0 SP5
Oracle Version : 8.0
OS : Win NT 4.0 SP5
User : Scott
Oracle Procedure
Name : TEST_PROC
Parameters: None
The procedure look something like this ...
Create or Replace PROCEDURE TEST_PROC
AS
BEGIN
Insert into Table1 Values('A');
END;
Scenario One
Executing the stored procedure using Linked Server (JDEV), configured Using OLEDB For Oracle, results in the following error
Server: Msg 7212, Level 17, State 1, Line 1
Could not execute procedure 'TEST_PROC' on remote server 'JDEV'.
[OLE/DB provider returned message: One or more errors occurred during processing of command.]
[OLE/DB provider returned message: Syntax error in {call...} ODBC Escape.]
Scenario One
Executing the stored procedure using Linked Server (SCOTT), Configured Using OLEDB for ODBC, results in the following error
Could not execute procedure 'TEST_PROC' on remote server 'SCOTT'.
[OLE/DB provider returned message: One or more errors occurred during processing of command.]
[OLE/DB provider returned message: Syntax error in {call...} ODBC Escape.]
Could you please help me out with a workaround. In case SQL-DMO is the only workaround, can you provide some sample programs.
The bigger picture is, replicating Execution of a SQL Server Stored Procedure on Oracle.
Linked Server Procedure Call
May 30, 2013I am trying to call a DB2 procedure in SQl server through a linked server object. I use the IBMDADB2 provider for the linked server. on the DB2 I have a simple procedure with 2 in and 1 out paramater. on DB2 it works no problem.but in SQL server I just cannot get it to work.
so my code:
DB2IBM is the name of the linked server.
declare @I_DIS smallint
declare @I_UID char(8)
declare @ID_TICK int
alternative 1:
Exec ('Call btp.GET_TICK(?,?,?)',@I_DIS, @I_UID, @ID_TICK OUTPUT) AT DB2IBM
alternative 2:
EXECUTE DB2IBM..BTP.GET_TICK 2,'19', @ID_TICK
in both cases I got the same error:
OLE DB provider "IBMDADB2.DB2COPY1" for linked server "DB2IBM" returned message " CLI0100E Wrong number of parameters. SQLSTATE=07001".
so how can I call this procedure?
Call Getdate From Linked Server
May 12, 2008Hello,
i need get value of getdate function on local and oon linked server by one select something like this:
select
getdate() 'locladate'
, [SERVER2SQL05_01, 9999].getdate() 'remotedate'
first problem i dont know in which database is getdate stored, second is it possible call function from linked server in select statement?
Thanks Jakub.
Recursive Call Of ETL Through SQL Server Job Error
Apr 30, 2008I have created a package which has to move huge volume of data in chuncks from source to target with a few sorter transformations and many lookup transformation. Once a chunck is completed the Execute SQL Task in the package updates the etldates into a control table against the chunkid. I want this run in a loop, as on completion of a chunk another should start and follow the same process until there are no more chuncks in the control table.
First i execute the package manually, then i have written a trigger to call the SQL Server Job (etl) on update of the dates for the chunkids in the control table. The job when being called by the on update trigger is throwing up the following error. "The job failed. The Job was invoked by User fwt
obin. The last step to run was step 1 (Package1)".
Am i missing something basic here?
PS: So i tried putting the package into a for each loop container, performance suffers. A chunck which used to take 2 hours is taking more than 12 hours to complete. Then i removed sorter transformation and used db sorting in my source OLE db. Then thought of cacheing the lookups but did not know how and what to give so i gave up. While iam here, DB sorting/SSIS sorting? which is better?
SSIS Call Fails In 64 Bit Server
Sep 20, 2007SQL server agent has to be executed form a user other than windows admin. A SSIS where an excel file is loaded into a SQL Server table has to be scheduled by a job.SSIS runs fine alone in the server but fails when called by agent job. http://support.microsoft.com/?kbid=918760#appliesto article has this specific error described but in a 64 bit server this error cannot be rectified. Any ideas?
View 1 Replies View RelatedSQL Server 2008 :: How To Call Database From Another Server
Oct 2, 2015How to call database from another server while trying to set up a job on the reports server.
I currently have a job set up on on Server S now I exactly want the same job set up on the reports server to get some consistency.
Is there a way I can call database from another server while creating a job on reports server?
Stored Procedure Fails On Call From V6.5 To V7 MS SQL Server
Aug 24, 2000I am having a problem trying to run a stored procedure
from a MS SQL Server version 6.5 server. The stored
procedure calls another stored procedure on a MS SQL
Server version 7.0 server.
The job task always fails with the error message...
"Login failed for user 'sa'. (Message 18456)".
I can run the stored procedure from the T-Query window
on the 6.5 server successfully but it will not run
as a job task.
Does anyone have any suggestions?
Invalid Procedure Call... Error With SQL Server 7
Feb 5, 1999I'm having trouble with the following code. I get a "Invalid procedure call or argument" error in response to OpenResultset. The same command works in MSQuery and when ADO is used. Does anyone have any insight?
We're using VB5.0 SP2 and SQL Server 7 Beta 3.
Option Explicit
Sub Main()
Dim objC As RDO.rdoConnection
Dim objColsRS As RDO.rdoResultset
Dim objQ As rdoQuery
Set objC = New RDO.rdoConnection
With objC
.Connect = "Driver={SQL Server};Server=KENBNT;UID=SYSADM;PWD=SYSADM;DATABA SE=QT;"
.EstablishConnection
Set objQ = objC.CreateQuery("", "select name from syscolumns")
Set objColsRS = objQ.OpenResultset
End With
Set objColsRS = Nothing
Set objQ = Nothing
Set objC = Nothing
End Sub
Call Remote Server In A Stored Procedure(6.5)
Nov 27, 2001Hi,
I was wondering is anyone can help me out on this one,
I want to run a query, but I need to reference a Database that exists on a different server. I am using SQL 6.5
Any suggestions would be welcomed,
Thanks a mill,
Fin
SQL Server 2012 :: Call SP On The Basis Of Input?
Feb 15, 2015I have create Store procedure for all the Source and destination table for loading new and updated record.
For example I have below Store procedure
1-SP_Archive_using_merge_Fdoor
2-SP_Archive_using_merge_Fdoop
now I want to call all the sp on the basis of input like If filename is Fdoor then it shold fire the SP_Archive_using_merge_Fdoor , if file name is Fdoop then it shoilud fire the SP_Archive_using_merge_Fdoop like that .
below is the 2 sp .
--First SP
ALTER PROCEDURE [dbo].[SP_Archive_using_merge_Fdoor]
AS
BEGIN
SET NOCOUNT ON
DECLARE @Source_RowCount int
DECLARE @New_RowCount int
[code].....
Call A Oracle Stored Proc In SQL SERVER
Jul 20, 2005We have set up Oracle database as a linked server in SQL Server.We are able to access Oracle tables fine.I am trying to call a Oracle stored procedure in SQL Server as follows:declare @p1 varchar(1000)set @p1 = 'HHH'exec GENRET..OPS$GENRET.BOB_TEST_PROC @p1This is the message:Server 'GENRET' is not configured for RPC.Please help.Thanks in advancev
View 1 Replies View RelatedHow To Call Proc On Linked Oracle Server
Sep 12, 2006
Sorry if this is very stupid question, but i've spent too long searching for the answer:
I have a linked Oracle server set up for RPC in SQL server 9 db. How do I call it? I've tried this, but gives Unspecified error:
"
OLE DB provider "OraOLEDB.Oracle" for linked server "SANSORA1" returned message "Unspecified error".
"
From this:
declare @UserName char(20) -- Current Username
declare @Password varchar(20) -- Current Password
declare @PasswordNew varchar(20) -- New Password
declare @PasswordCfm varchar(20) -- Confirm New Password
set @UserName = '900878'
set @Password = '900878'
set @PasswordNew = '777'
set @PasswordCfm = '777'
declare @return int
exec SANSORA1..PCG.USR_CHANGEPASSWORD @UserName ,@Password ,@PasswordNew ,@PasswordCfm;
--Exec ( 'SANSORA1..PCG.USR_CHANGEPASSWORD (' + @UserName + ' ,' + @Password + ' ,' + @PasswordNew + ' ,' + @PasswordCfm + ')')
Call SSIS Remotely To Run Exe Task In Server By C#
Sep 15, 2007
I would like to build a C# program to connect to a remote SQL2005 server.
Then call the server SSIS to run a .exe in the server (The .exe file already exist in the SQL2005 server)
I have refer to the following webpage http://www.codeproject.com/useritems/CallSSISFromCSharp.asp
I can connect to the SQL server by the "LoadFromSqlServer" method with SQL server login A/C.
However, the SSIS failed. I believe it should be due to the window authentication issue. During SSIS execution, the SQL server login A/C does not have the access right to run the .exe file
Could anyone suggest the solution?
Thanks.
SQLExecDirectA Call Hangs Up On SQL Server 2000
May 7, 2007Hi,
I am trying to execute a stored procedure on SQL server 2000 Developer edition through ODBC. I am using a VC++ client for the same. The stored procedure has 51 parameters. The issue is that the response on method SQLExecDirect is not consistent. At times it will return success or failure based on parameter values, otherwise it just hangs up. The code snippet is like -
// get database handle
// get statement handle
//call sql bind parameter
// set memory for query string and copy it
// strcpy(sqlString,"{call pi_ml_*******(?, ?, 2, 0, 0, ?, ?, 100,'2007-05-04 19:37:37.357', '2007-05-04 19:37:37.357', 1, 1, 72, ?, 72, ?, ?, ?,0, 0, ?, 0, NULL, NULL, 0, 0, 0, 0, ?, '2007-05-04 19:37:37.357', ?, ?, ?, 0, 0, ?, ?, 0, NULL, ?, ?, 0, NULL, NULL,NULL, NULL, 0, NULL,NULL, 0, 0, 0)}");
//call sqlexecDirectA( for an ANSI build)
returnVal = SQLExecDirectA(hstmt, (UCHAR*)sqlString, SQL_NTS);
It appears to be some locking issue but I am the only user for the database. This code works perfectly fine for other stored procedures. I have tested the parameters on SQL analyzer store procedure execution utility.
Thanks,
Peeyush
Please Help : A Call To SQL Server Reconciler Failed. Try To Resynchronize.
Mar 21, 2006Hi all,
While i am doing new substription wizad, I encounter following error: Do I miss something?
A call to SQL Server Reconciler failed. Try to resynchronize.
A call to SQL Server Reconciler failed. Try to resynchronize.
HRESULT 0x80004005 (29006)
The schema script 'C:Program FilesMicrosoft SQL ServerMSSQLReplDataunccompuntername_SQLMOBILE_SQLMOBILE20060321224198CustomerData_2.sch' could not be propagated to the subscriber.
HRESULT 0x80070005 (0)
The merge process was unable to deliver the snapshot to the Subscriber. If using Web synchronization, the merge process may have been unable to create or write to the message file. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write.
HRESULT 0x80045017 (0)
I am using
IIS 5.1
SQL 2005 (Upgrade from SQL 2000 SP4)
Visual Studio 2005
Thank you very much
Tony
Function Call To Progress Linked Server
Nov 23, 2006I have a Progress DB set up as a linked server.
To get the data through to SQL Server 2005 in a useable format i need to use the progress PRO_ELEMENT function call. How do I delimit this so it gets passed to the progress DB.
I've tried
SELECT
{fn PRO_ELEMENT(fldarr1,1,1)} as fld1
from ls1..pub.tab
This just returns an unknown function message which I believe is on the SQL Server end of the call.
This statement works fine through Business Objects.
Any help greatfully received.
SQL Server Paging / Alert Call To A Mobile Phone
Dec 13, 2000Hi
I am trying to setup alert msg. on my mobile phone when sql task fails
Has any body done this before????? Any sugessitions????
Thanks
Vijay
SQL Server 2012 :: Call A Split Parameter Function
Sep 15, 2014In t-sql 2012, the followinng sql works fine when I declare @reportID.
IF @reportID <> 0
BEGIN
SELECT 'Students report 1' AS selectRptName, 1 AS rptNumValue
UNION
SELECT 'Students report 2', 2
UNION
[code]...
However when I use the sql above in an ssrs 2012 report, the query does not work since the @reportID parameter can have 0, 1, or up to 200 values.Thus I am thinking of calling the following following function to split out the parameter values:
FUNCTION [dbo].[fn_splitString]
(
@listString VARCHAR(MAX)
)
RETURNS TABLE WITH SCHEMABINDING
AS
RETURN
(
SELECT SUBSTRING(l.listString, sn.Num + 1, CHARINDEX(',', l.listString, sn.Num + 1) - sn.Num - 1) _id
FROM (SELECT ',' + LTRIM(RTRIM(@listString)) + ',' AS listString) l
CROSS JOIN dbo.sequenceNumbers sn
WHERE sn.Num < LEN(l.listString)
AND SUBSTRING(l.listString, sn.Num, 1) = ','
)
GO
how to remove the @reportID <> 0 t-sql above and replace by calling the fn_splitString function?
SQL Server 2008 :: Call SSIS Package From Procedure
Mar 5, 2015I am having few queries related to follow.
1. Is it possible to call SSIS package from procedure .
2. Also want to supply parameters to procedure.
3. Can multiple users execute that procedure simultaneously.
4. If yes then will it cause any issue if it is run simultaneously by 10 users.