I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.
How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?
I know this is probably simple but I am trying to call a stored procedure from another stored procedure. Basically this is so I can group lots of table updates into one overnight procedure to run. I don't need a record return using temp tables which is the only reference I seem to be able to find about stored procedures in stored procedures. I just want it to run. Tried the obvious:
I have a stored procedure I created in SQL server 2005. Now I need to call the stored procedure in C#. Can someone help me out here? What is the C# code I need to call this stored procedure? I have never done this before and need some help. CREATE PROCEDURE [dbo].[MarketCreate] ( @MarketCode nvarchar(20), @MarketName nvarchar(100), @LastUpdateDate nvarchar(2),) ASINSERT INTO Market( MarketCode MarketName LastUpdateDate)VALUES( @MarketCode @MarketName @LastUpdateDate )
I have created a stored procedure only with an insert statement in sql server 2005. How can i call this stored procedure through code in ASP.NET page using vb. i want to pass one parameter that comes from a text box in asp.net page. my emailid is: g12garg@yahoo.co.in pls reply. Thank you Gaurav
Does anyone give me syntax for adding a bcp script within a stored procedure..I had done it once 3 yrs back does'nt seem to work now, and I do not know where I am going wrong?? Thanks
Even though this may be not right place with this issue I would like to try! I facing with the problem “Object Variable or With Block variable not set” while I am trying to execute the stored procedure from Ms. Access form. I need some help very badly or maybe a good sample of code that works in this issue is very welcome.
i created a stored procedure and below is the code segment of it;
create Procedure test1 @price as varchar(50) output, @table as varchar(50) = '' AS
Declare @SQL_INS VarChar(1000)
SELECT @SQL_INS = 'select ['+@price+'] from ['+@table+']'
Exec (@SQL_INS)
Procedure gets 2 parameters, one of them is just INPUT parameter and the other one is both OUTPUT and INPUT. What i wanna do is to get the result set of this procedure to use in my application.
i am working on VC++ (visual studio2005 with sql200).i have created one stored procedure to insert data into table. i want to call this strd procedure in the VC++ main.cpp file....
Could you please help me for the correct syntax code with example.
Hi there. My problem is: I have two stored procedures. 1. SELECT A FROM B 2. SELECT C FROM D WHERE A = EXEC First procedure
The meaning: First procedure gets some Id from B table. The second one gets a DataSet by this Id number. The problem is that when I getting an Id from first proc I use SELECT, than in the second one I use EXEC, and in the end, seconf procedure returns two DataSets. The first contains an Id from first procedure, second contains a valid DataSet. Therefore my application falls because it suppose that valid data in first DataSet. Hoow can I call to stored procedure from another stored procedure without creating two DataSets? P.S. I already tried to use return instead of select in the first procedure. Same result. Thank you
I didn't want to maintain similar/identical tables in a legacy FoxPro system and another system with SQL Server back end. Both systems are active, but some tables are shared.
Initially I was going to use a Linked Server to the FoxPro to pull the FP data when needed. This works. But, I've come up with what I believe is a better solution. Keep in mind that these tables are largely static - occassional changes, edits.
I will do a 1 time DTS from FP into SQL Server tables.
I then create INSERT and UPDATE triggers within FoxPro.
These triggers fire a stored procedure in FoxPro that establishes a connection to the SQL Server and fire the appropriate stored procedure on SQL Server to CREATE and/or UPDATE the corresponding table there.
In the end - the tables are local to both apps.
If the UPDATES or TRIGGERS fail I write to an error log - and in that rare case - I can manually fix. I could set it up to email me from within FoxPro as well if needed.
Here's the FoxPro and SQL Server code for reference for the Record Insert:
Hi, I would like to trigger a DTS or a stored procedure from asp.net 1.1 BUT I don't want to wait for it to finish. In fact the DTS/Storeproc calculates values into different tables. Those values are not needed immediately. The calculation takes between 20 or 30 minutes. Do you have any idea how to do it ? Thanks
I have gridview display a list of users. I have added a column for a check box. If the box is checked I move the users to another table.I need to pass some parameter of or each row to a stored proc. My question. In the loop where I check if the checkbox is selected I need to call the stored procedure.Currently I do an open and closed inside the loop.What is best and most effficent method of doing this should I open and close the connection outside the loop and change the procs parameters as loop through. System.Data.SqlClient.SqlConnection conn = new System.Data.SqlClient.SqlConnection( System.Configuration.ConfigurationManager.ConnectionStrings["connString"].ConnectionString); System.Data.SqlClient.SqlCommand commChk = new System.Data.SqlClient.SqlCommand("storedProc", conn); commChk.CommandType = System.Data.CommandType.StoredProcedure; commChk.Parameters.AddWithValue("@mUID", ddMainUser.SelectedValue.ToString()); commChk.Parameters.AddWithValue("@sUId", gvUsers.Rows[i].Cells[2].Text); commChk.Connection.Open(); commChk.ExecuteNonQuery(); conn.Close(); If so exactly how do I do this? How do I reset the parmaters for the proc? I haven't done this before where I need to loop through passing parameter to the same proc. thanks
Hi All, I'll admit that I'm not the greatest at stored procedure/functions but I want to learn as much as possible. So I have two questions: 1) I had VS2005 autogenerate a sqldatasource that created Select/Insert/Update stored procedures. When Updating a record and calling the stored procedure, I want to query another table (we'll call it tblBatchNo) that has only one record, Batchno. I want to put that current batchno into the Update statement and update the record with the current batchno. Can someone point me in the right direction? Remember that I'm still a beginner on this subject. 2) Can someone provide any links to online tutorials on t-sql? Thanks in advance. Curtis
Hi.....I have problem and I need your helpI stored a procedure in the Projects Folder in my computerand I want to return the procedure result in a column inside tableHow I can do that?????????thank you
Can DTS make a call to a stored procedure on an AS/400 and accept data from that call. I need to access the AS/400 through OLE/DB for AS/400, execute the call to a stored procedure (the AS/400 stored procedure gets the data from DB2/400, executes some business logic, then presents the record set), and grab the record set returned and dump it into a SQL 7.0 table.
I'm using the sp_OAMethod method to call a method called "getDesc" from within a VB .dll I created. Within the .dll file, the method is called "getDesc()", but for some reason I'm getting an error saying it is an unknown name. I am able to create the object without errors, so I know the .dll is correctly registered and is being found by the server. Any idea what would cause this error when I know the method name is correct? The code I use is below (without error handling to make it shorter):
I am using an Access 2003 front-end, and an SQL backend to run my application. I have a pretty good handle on using stored procedures and assigning variables for criteria within the SPROC.
I am however having a problem when I try to use a variable in place of a named procedure. For example I have a function that runs 2 procedures, therefore I "Call" the function with the code that runs my procedure, and simply change the name of the SPROC with each call. My problem is that I cannot figure out the syntax to use a variable for the named procedure. My code always errors on the line "objConn.MySProc MyCalendar, objRs" because MySproc is of course not a named procedure.
So how do I refer to a procedures name using a variable?
Hi All,I have a stored procedure.I need to create a scheduled job using that stored procedure.I went to Enterprise Manager -->Management--> Jobs-->New JobPropertiesIn the step tab, I can select db and put the codes.Instead of writing the code there, I want to call the stored procedurein the command box.How can I do that?System: MS SQL Server 2000I would highly appreciate your help.Thanks a million in advance.Best regards,mamun
HelloI am calling a stored procedure in a MSDE/SQLServer DB form within myVisual C++ 6.0 program along the linesCCommand<CAccessor<CdboMyAccessor>>::Open(m_session, NULL);WithDEFINE_COMMAND(CdboMyAccessor, _T("{ CALL dbo.MyProc; 1(?,?) }"))It all works sweet as, but it can take a while and I want to let theuser abort it.Everything I've tried ends in tears.
I would like to know how can I call a c#.net class from a stored procedure.
I have a class file which will generate a pdf file from sql reporting services and mail that file. Now I want to call this class from a stored procedure. Is it possible, if so please send me the sample code.
I have a sql2005 express database I am using in a vb2005 application. I have read a bunch and can't seem to find a clear (to me) example of how to call a stored procedure. I have a procedure that runs ok in the query builder, but don't have a clue about how to call it now that it is written. SO. call the database MYdatabase call the Stored procedure MYStoredproc. Any help? Dave PS: it dosen't require and values passed to it, its very simple.
When I try to call a stored procedure by using one of the two marked code segments instead of concatenating string in GetRelation, I can deploy the project to my SQL server without problem. But when I call GetRelation from Query Analyzer, I get an error: "Invalid use of side-effecting or time-dependent operator in 'SET ON/OFF' within a function."
What does the error message mean? How could I correct it? Thanks for answering.
