Calling Oracle Procedure From SSIS 'Execute SQl Task' Is Not Working
Nov 6, 2007
Hi ,
Iam using 'Execute SQl task' which calls a stored procedure located in sql server database.The task's SQL source type is variable and the variable has the follwoing expression "EXEC PROC_SEL_MBO_REPORT "+@[User::V_SP_Job_Date]after evaluation it is like EXEC PROC_SEL_MBO_REPORT '01/NOV/2007'.It is working fine
Now the procedure is changed to Oracle.So I have changed it to "BEGIN PROC_SEL_MBO_REPORT " + "("+ @[User::V_SP_Job_Date]+")"+"; END"+";" after evaluation it is like BEGIN PROC_SEL_MBO_REPORT ('01/NOV/2007') END;.It is sucessfully executing from the task but no data is loaded into the tables which are used by the procedure internally.
Executing 'execute BEGIN PROC_SEL_MBO_REPORT ('01/NOV/2007') END;' is perfectly alright from SQl developer or sql plus.
I'm using Execute SQL Task to call an Oracle stored procedure. The following is the error that I get.
Error: 0xC002F210 at Validate and Transfer Actuals, Execute SQL Task: Executing the query "{call RS2_RealProject_ETL.TransformLoadAction}
" failed with the following error: "ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'TRANSFORMLOADACTION'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Per my review of the Forums, I'm entering the SQL syntax correct that is as follow and also use parameter names in Oracle in ordinal method starting from 0.
I have three "input" and one "output" parameter for the stored procedure that they all are of type "NUMBER" in oracle and I've defined them in "Parameter Mapping" window of Excute SQL Task as "NUMERIC".
I am facing problems while calling Oracle stored procedure which has no parameters.
I have used Microsoft OLE DB provider for Oracle. I have taken one Execute SQL task and set the SQLStatement as call procedurename
I also set the IsStoredProcedure property to True for Execute SQL task.
Is there any synatx problem?
I am getting an error saying
Error: 0xC002F210 at Call Sp, Execute SQL Task: Executing the query "(call sp_procname)" failed with the following error: "ORA-00928: missing SELECT keyword.
I removed the curly braces for the SQL statement and again ran the Package, i am getting the below error
Executing the query "call sp_procname" failed with the following error: "ORA-06576: not a valid function or procedure name
Can anyone help me out on this regard! Thanks in advance.
I am trying to execute a Oracle Procedure through Execute Sql Task but it keeps throwing back an error ORA:00900. Is it possible to execute the procedure from this object? Do I need to use the script task to execute this. If yes then how?
I'm executing Oracle procedure, which has three OUTPUT parameters and returns results in table type variable. i should not use ODBC, MSDAORA providers to call the procedure. So I'm planning to using Oracle OLEDB provider. I'm able to execute the procedure successfully, but when i do check (while dr.Read()) its not returning any records. But I know as per stored procedure results, it should return 66 records.
Dim conn As New OleDbConnection Dim cmd As New OleDbCommand Dim dr As OleDbDataReader Dim QSQL As String
I'm having a hard time to getting back an xml data back from a stored procedure executed by an Execute SQL task.
I'm passing in an XML data as a parameter and getting back resulting XML data as a parameter. The Execute SQL task is using ADO connection to do this job. The two parameters(in/out) are type of "string" and mapped as string.
When I execute the task, I get the following error message.
[Execute SQL Task] Error: Executing the query "dbo.PromissorPLEDataUpload" failed with the following error: "The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Parameter 2 ("@LogXML"): Data type 0xE7 has an invalid data length or metadata length.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
I also tried mapping the parameter as XML type, but that didn't work either.
If anyone knows what's going on or how to fix this problem please let me know. All I want to do is save returning XML data in the parameter to a local package variable.
I have a remote batch file on machine B that I need to execute using 'Execute process task' control from a package on machine A. The batch file uses pgp software and encrypts a file sitting on machine B itself. The reason why my batch file is sitting on machine B, is because the PGP software is on machine B.
If I execute the batch file by itself from machine B, the script runs fine. I refer the same batch file as a UNC path from my package on machine A. But that does not work since the 'Working directory' is still machine A. I can not set machine B's folder as the working dir because it does not accept UNC path. So I say, ok , let me map a path to that UNC location and map it as drive 'Z:'. Certainly if I do so, I will be running the process on machine A and the batch file will look for the pgp software on machine A, and hence fail.
I have tried third party remote batch execution tools (PSEXEC) but have not had success, not because of SSIS limitations, but simply because the PGP executable when run through the PSEXEC tool, does not identify the location of the public keys on machine B and hence gives an encrytion failure.
How do I get the remote batch file to execute such that it executes with its own env? Is there a better remote execution tool I can try or are there any other features of SSIS I can use to get around this issue? I need the results of the batch file and hence do not want to make it an asyncronous process.
Is there a way to call an Oracle Procedure using the MS OLD DB Providerfor Oracle object in a SQL Server 2000 DTS package? If it can't be donethis way, is there another way to retrieve data from an Oracle databaseusing an Oracle procedure to a SQL Server table? Also, can parametersbe passed into Oracle from SQL Server via a procedure? Our Oracle DBAdoes NOT want to create views to enable SQL Server to access the data.Examples would be great if possible. Thanks.*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
This is the first time I've tried creating an "execute sql task" with a "full result set".
I've read in the documentation that I must set the resultname to 0, which is done, and that the variable must be of type object. Also done.
[Execute SQL Task] Error: Executing the query "select * from blah" failed with the following error: "The SelectCommand property has not been initialized before calling 'Fill'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Has anyone else had success with a full result set?
I had got the below error when I execute a DELETE SQL query in SSIS Execute SQL Task :
Error: 0xC002F210 at DelAFKO, Execute SQL Task: Executing the query "DELETE FROM [CQMS_SAP].[dbo].[AFKO]" failed with the following error: "The transaction log for database 'CQMS_SAP' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
But my disk has large as more than 6 GB space, and I query the log_reuse_wait_desc column in sys.databases which return value as "NOTHING".
So this confused me, any one has any experience on this?
I am facing problems while calling Oracle stored procedure which has no parameters.
I have used Microsoft OLE DB provider for Oracle. I have taken one Execute SQL task and set the SQLStatement as call procedurename
I also set the IsStoredProcedure property to True for Execute SQL task.
Is there any synatx problem?
I am getting an error saying
Error: 0xC002F210 at Call Sp, Execute SQL Task: Executing the query "(call sp_procname)" failed with the following error: "ORA-00928: missing SELECT keyword.
I removed the curly braces for the SQL statement and again ran the Package, i am getting the below error
Executing the query "call sp_procname" failed with the following error: "ORA-06576: not a valid function or procedure name
Can anyone help me out on this regard! Thanks in advance
1. (calls an oracle package) - call lpaarchive.pibrdg.setlastbridgeruntime(sysdate);
2. (selects rows) - select timestamp ,
pitag ,
rtlmp from LPAARCHIVE.I_PIBRDG_BUS5MINRTLMPS
where timestamp <= (sysdate + 0.002777778)
order by TIMESTAMP ASC; I need to execute these 2 statements together. I tried using Execute SQL task to call the package and then an OLEDB source that calls a variable with the select statement. But it does not retrieve any rows. It seems like the result of calling the package is used by the select statement to give the final rows. Could anyone please help me resolve this issue.
Server: Msg 7212, Level 17, State 1, Line 3 Could not execute procedure 'EmployeeOutPrm' on remote server 'GENEVA'. [OLE/DB provider returned message: One or more errors occurred during processing of command.] [OLE/DB provider returned message: Syntax error in {call...} ODBC Escape.]
I am trying to call oracle stored procedure from SRSS 2005. I am using the syntax { Call s_test_rcur()} . I am getting following error.An error occurred while retrieving the parameters in the query.ORA-00911: invalid characterORA-06512: at "SYS.DBMS_UTILITY", line 68ORA-06512: at line 1
ORA-00911: invalid characterORA-06512: at "SYS.DBMS_UTILITY", line 68ORA-06512: at line 1 (System.Data.OracleClient) Here is the Oracel stored proc. TYPE rc_test IS REF CURSOR; PROCEDURE s_test_rcur (po_test_rc OUT rc_test, -- returns a record setpo_error OUT INTEGER)ISBEGIN g_err_level := 1;OPEN po_test_rc FORSELECT a.ssn_id,TO_CHAR (a.acad_yr) || TO_CHAR (a.acad_yr + 1) acad_yr,RPAD (NVL (last_name, ' '), 30, ' ') last_name,RPAD (NVL (first_name, ' '), 30, ' ') first_name,NVL (middle_initial, ' ') middle_initialfrom test_tableorder by last_name;po_error := 0;EXCEPTIONWHEN OTHERSTHENpo_error := -1;g_error_code := SQLCODE;g_error_msg :='Err level :' ||TO_CHAR (g_err_level) ||' ' ||SUBSTR (SQLERRM, 1, 250);END;
I'm using SSIS in Visual Studio 2012. My Execute SQL Task calls a Stored Procedure where I have a TRY-CATCH. Last week there was a problem and the CATCH was executed and logged an error to my error table, but for some reason the Execute SQL Task didn't fail. Is there a setting to make the Execute SQL Task fail when an SP encounters a failure?
I have a SQL Task that calls a stored procedure and returns an output parameter. The task fails with error "Value does not fall within the expected range." The Stored Procedure is defined as follows: Create Procedure [dbo].[TestOutputParms] @InParm INT , @OutParm INT OUTPUT as Set @OutParm = @InParm + 5 The task uses an OLEDB connection and has a source type of Direct Input. The SQL Statement is Exec TestOutputParms 7, ? output The parameter mapping is: Variable Name Direction Data Type Parameter Name User::OutParm Output LONG @OutParm
I executed them and got the following results in SSMSE: TopSixAnalytes Unit AnalyteName 1 222.10 ug/Kg Acetone 2 220.30 ug/Kg Acetone 3 211.90 ug/Kg Acetone 4 140.30 ug/L Acetone 5 120.70 ug/L Acetone 6 90.70 ug/L Acetone ///////////////////////////////////////////////////////////////////////////////////////////// Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming: //////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class ///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors: Error #1: Type 'SqlConnection' is not defined (in Form1.vb) Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb) Error #3: Array bounds cannot appear in type specifiers (in Form1.vb) Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance, Scott Chang
More Information for you to know: I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly. I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
When running an integration services package from a windows service I get the "Object ... has been disconnected or does not exist at the server." exception after aproximately six minutes of execution.
This is *not* my windows service failing. I can loop indefinately while tracing to a log file within the service and it will run forever. While calling the mypackage.execute(...) method however, after six minutes (give or take) the exception is thrown...
my code looks something like this: <code> dim foo as Microsoft.SqlServer.Dts.Runtime.Application mypackage = foo..LoadPackage(strimportPkgFilename, pkgevents) results = myPackage.Execute(Nothing, Nothing, pkgevents, Nothing, Nothing) </code>
<error> A first chance exception of type 'System.Runtime.Remoting.RemotingException' occurred in mscorlib.dll Exception in: frmMyForm.DoImports Message: Object '/b76f98a0_5bd9_49d8_a524_eeb49d55b303/bqbhkjnaofq_ifr_cwz+srid_1.rem' has been disconnected or does not exist at the server. </error>
oddly, this same code works perfectly if I run it within a windows form application no matter how long it takes.
It also runs fine if the package can complete in under six minutes.
I was wondering if someone could point me in the direction of any sample code or documentation that allows you to execute SSIS packages from within a Script task?
In SQL Server 2000 DTS this was accomplished by instantiating the DTS.Package object and calling either the LoadFromSQLServer or LoadFromStorageFile method.
I have not been able to find any similiar logic in the SQL Server 2005 SSIS environment.
I'm attempting to call a storedprocedure from within an ActiveX task ina DTS and am getting a "Command Text was not set for the commandobject" error. I have no problem if I replace the stored procedure callwith the actual SQL.Is it possible to directly call a SP via an ActiveX task? If yes, couldsomebody help me with the syntax please?This is what I have currently haveSet Conn = CreateObject("ADODB.Connection")SQL = "exec (MySP)"set RLoop=conn.Execute(SQL)do while (NOT RLoop.EOF)msgbox RLoop(1)RLoop.MoveNextLoopTIAKarthik
I'm pretty stuck on a security issue in SSIS. The web service works by itself, but I can't call it from SSIS, it gives me a 401 unauthorized error. The web service also uses impersonation of my domain admin account.
I have tried the following things: Setting integrated windows authentication in IIS Setting the NTFS permissions of those web site directories to EVERYONE Using a credential / proxy in SSIS and running it from SQL Agent Changing the log on services of MSSQLSERVER, SQLAGENT, and SQL Integration Services to my domain admin account
I can't get anything to work. What is wrong with this thing? Microsoft's security model has gotten completley out of of hand imo
Also in the security event log it shows all authentication as successful.
I have a package that inserts data from a sql server table to an oracle table. I use a dataflow task to do the loading.
The weird thing is, if the package fails during execution, the transaction does not perform a rollback and the inserted data is committed.
The dataflow component has its TransactionOption set to Supported (this has always been the case for our sql to sql packages). However, now that I have a sql to oracle package, it won't work anymore.. also, setting the TransactionOption of the dataflow component to Required causes the whole package to fail.
I am searching for a solution for Calling or consume a web service in SSIS through Script task. I have gone through so many links but i am able to find the exact solution. I am getting so many references, though i am unable to crack it.
My requirement is i need to call a web service URL through script task which is having a client certificate. When we are trying to connect to the URL it will ask for the certificate authentication. After calling this URL we will get a WSDL file from the web service, We need to consume that WSDL file and we need to identify the methods inside this WSDL and need to write the data available in this WSDL to the data base tables.
How can we call that web service URL( With certificate) through script task and how can we read the WSDL file and How we can load the data into DB table.
Hi, I'm trying to do a straight forward call to an Oracle Stored Procedure from a GridView Web Control using UpdateQuery. I created a simple procedure (then tried a package) with no parameters (then with a parameter) and tried to call it from UpdateQuery. I either get a Internal .Net Framework Data Provider error 30 with a parameter or Encountered the symbol "UARF_FUNCTIONAL_UPDATE" when expecting one of the following: := . ( @ % ; without using a paremeter. My updatequery on the sqldatasource control is: exec uarf_functional_update; I'm sure I'm missing something very simple (syntax or something), but I can't find the right direction in my help material. Any assistance would be greatly appreciated. Thanks, E.
I've tried several different way to execute a oracle storedprocedure from a DTS package but to no avail.I have a Linked Server setup which does bring back Oracle tables from theserver when I click on the Tables icon.Here's my DTS statement:exec omsd..OMS_TECO.SP_Callback_Update_Pkg(116);omsd is the linked serveroms_teco is the owner of the oracle stored procedureSP_Callback_Update_Pkg is the oracle stored procedure(116) is the parameter passed to the oracle stored procedureI put the above exec statement in a DTS Execute SQL Task using a Connectionthat I tried using several OLE and ODBC Data Sources. I can't seem to findthe right combination.Please Help!!!!!!!!--Message posted via http://www.sqlmonster.com
I'm trying to build ssis package that select rows from SQL Server table and
according to Conditional Split cube results I should execute oracle stored
procedure with in and out parameters.
The in parameters should come from the SQL select and the output parameters
should be inline parameter that I should declare on in the OleDB Command
selecet statement.
Here is the sql statement I wrote in the OleDB Command:
declare @out_return_status as int declare @out_return_msg as varchar (1000) begin exec clickace.cns_clk_sst_iw_pkg.update_instal_warranty_dates ?,?,?,?,?,
@out_return_status,@out_return_msg end
When I click on the Refresh button in the ssis GUI I get the following error:
An OLE DB error has occured. Error Code : 0x80040E51.
An OLE DB record is available. Source: OraOLEDB Hresult : 0x80040E51.
Description :"provider cannot provide parameter information and
A stored function is created in MySQL Server running on Linux with following info: mysql > delimiter $$ mysql > CREATE FUNCTION GetMaxKeyForSampleTable() -> RETURNS DOUBLE READS SQL DATA -> BEGIN -> RETURN (SELECT MAX(MJD) FROM tblSampleTable); -> END; Query OK, 0 rows affected (0.02 sec) mysql > delimiter ;
***The above function is successfully stored in the database.
"Execute SQL Task" add-in module has following info:
Got a problem with 'Execute SQL Task'. When I click to open the 'Execute SQL Task Editor', add a connection then click on 'Parameter Mapping' then click 'Add' button the window disappears. I have re-installed visual studio and applied SP1 but the problem is still there.
