1. find an error in the real code?
2. How can I reference a query with a given name in order to simplify my code, like this:
use ventas
go
select * into bds_temp1
from (named_query)
Error:
Msg 102, Level 15, State 1, Line 29
Incorrect syntax near ')'.
[code]....
After making several hundred queries against a SQL CE 2.0 database (through NetCF/ADO.NET), I begin getting a SqlCeException: "Not enough storage is available to complete this operation."
Microsoft speaks to this situation in the following hotfix:
http://support.microsoft.com/?kbid=827837
When I contacted them to receive the hotfixed ssce20.dll, they described the problem as SqlCeDataReader and SqlCeDataAdapter not releasing their memory resources after they went out of scope. In addition to using the hotfixed binary, they also advised me to call SqlCeEngine.Dispose() after every query to force SQL CE to release resources, as shown in the "finally" block of the code below.
I have a couple of questions about this:
(1)
Will this cause a lot of performance overhead for me, especially if my application makes frequent queries using the following code?
(2)
Can a cache an instance of SqlCeEngine and call Dispose() on that cached instance repeatedly, so I can avoid having to instantiate a new SqlCeEngine each time?
SqlCeConnection conn = null;
try
{
conn = new SqlCeConnection(connectionString);
dbCmd.Connection = conn;
dbCmd.Connection.Open();
dbCmd.ExecuteReader(CommandBehavior.CloseConnection);
<use the reader>
}
finally
{
dbCmd.Connection.Close();
// Add the following code to release resources?
SqlCeEngine engine = new SqlCeEngine(connectionString);
engine.Dispose();
}
I have created testreport.rdl using SQL Server 2012 SSRS. How to execute/call this through SQL query analyser, so that this will be executed and display output.
View 2 Replies View RelatedI have the following procedure, that calls a Padding function to pad characters to a field.
Here is what the procedure looks like
Code:
CREATE PROCEDURE [dbo].[Pad_Left]
@Table VARCHAR(255),
@Column VARCHAR(255),
@PadChar CHAR(1),
@PadToLen INT
AS
DECLARE @Query Varchar(5000)
SET @Query = 'UPDATE ' + @Table + '
SET ' + @Column + ' = dbo.Function_PadLeft(' + @Column + ', ''' + @PadChar + ''', ' + @PadToLen + ')'
EXECUTE(@Query)
GO
When I run this I get the error
Server: Msg 245, Level 16, State 1, Procedure Pad_Left, Line 13
Syntax error converting the varchar value 'UPDATE Lincoln
SET baths = dbo.Function_PadLeft(baths, '0', ' to a column of data type int.
But when I just run this query, it works
Code:
CREATE PROCEDURE [dbo].[Pad_Left]
@Table VARCHAR(255),
@Column VARCHAR(255),
@PadChar CHAR(1),
@PadToLen INT
AS
UPDATE Lincoln
SET Baths = dbo.Function_PadLeft(Baths, '0', 4)
GO
Why would one work but not the other? I don't understand, as they are the same thing, just one calls the function dynamically?
I must be missing something very obvious
Thanks for any help!
I use a database that has user names stored in Encrypted format usingthe following API.Declare Sub Encrypt2 Lib "QPRO32.DLL" (ByVal Work As String, ByValPASSWORD As String)Every time i require the user name i have to again decrypt the nameusing the same function.My problem is that when i fetch a large number of records i have toloop through every record and call the encrypt function for eachrecord.Instead of binding the recordset to my control i need to loopthrough and fill my controlA MSHFlexGrid in Vb6.0.Is there a way out to this problem that will make my record populatiogfaster withoutout changing the current Encrypted users.Thanx in Advance
View 2 Replies View RelatedHi all, i have a DTS package that i call from a C# app, i had it working great until i decided to use an activeX script to do the data transformations instead of the row copy. I need to use ActiveX to add a standard name to the last column in the destination table. the problem is the task is executing without errors (from c#) but nothing is happening, its failing silently. If i modify the Data Transformation back to a standard column mapping (with separate DTSTransformations for each column) it works fine, but as soon as i use activeX to handle the transformations it doesn't work. Can anyone tell me what i may be doing wrong. heres the calling code from C# if(f.Name.Substring(13,7).ToLower() == "product")
{
try
{
activity.Log("Starting Product DTS Package...");
DTS.Package2Class package = new DTS.Package2Class();
object pVarPersistStgOfHost = null;
package.LoadFromSQLServer(
"192.168.8.8",
"username",
"thepassword",
Microsoft.SqlServer.DTSPkg80.DTSSQLServerStorageFlags.DTSSQLStgFlag_Default,
null,
null,
null,
(string)ConfigurationSettings.AppSettings["productDTSPackage"],
ref pVarPersistStgOfHost);
package.GlobalVariables.Item(1).Value = f.FullName.ToString();
package.Execute();
package.UnInitialize();
//force release of COM object
System.Runtime.InteropServices.Marshal.ReleaseComObject(package);
package = null;
}
catch(Exception e)
{
activity.Log(string.Format("Failureprocessing {0}",WorkingPath + f.Name) +" - "+ e.Message);
} and the activex i tried to use for the transformations is: '**********************************************************************' Visual Basic Transformation Script'************************************************************************' Copy each source column to the destination columnFunction Main() DTSDestination("Yesmail Id") = DTSSource("product series") DTSDestination("Customer CKM CustId") = DTSSource("product family") DTSDestination("Product SKU") = DTSSource("transaction date") DTSDestination("product model name") = DTSSource("serial number") DTSDestination("serial number") = DTSSource("product model name") DTSDestination("transaction date") = DTSSource("Product SKU") DTSDestination("product family") = DTSSource("Customer CKM CustId") DTSDestination("product series") = DTSSource("Yesmail Id") DTSDestination("fileName") = DTSGlobalVariables("sourceFile").Value <-- this is why im using the activex for this field to get a Global Variable. Main = DTSTransformStat_OKEnd Functionthe weird thing is the PACKAGE runs fine from ENTERPRISE MANAGER with this activex, it just doesn't do it from my Calling app, perhaps i have missed something i need to change in the package constructor? BTW: i do have my assembly signed in C# for the COM wrapper.thanks in advance, mcm
Hello,
I have done extensive work with Classic ASP for 9 years now. Working with Stored Proceedures etc
However now am working in c# am adviced by a friend that its best to use the
1. The "Object data source" to call SP
2. Are there any documentations pointers on best practices, how its done ?
I want to use the "on click event" in my class file.
thanks
Ehi
Hello,
are there any sample codes that show you how to execute a SP in .net
1. Using a class
2. Calling the class in the onlick_button function ?
thanks
Ehi
I'm developing a new Stored Proc that will be taking information in to enter customer and order info. Looking at the current Stored Proc its using alot of If statements and I'm thinking of breaking the sp up into different Stored Procs and calling them all from One main stored proc. I know how to do this but I was wondering how it would effect performance. So should I simply keep all the stuff in one proc or module it out into multiple ones to make it easier to follow and read?
Thanks
Does anyone have an example of a Stored Procedure calling
another stored procedure and passing it parms.
What I would like to do is: Have a stored procedure select
data from a table and pass that data to another stored
procedure.
Thanks in advance,
Rodney
Hi,
Can I call SP in the Trigger? Googled for this but din gt any satisfactory answer.
Thnkx,
Rahul Jha
I'm working in SQL Server 2005. I have an existing SP that does exactly what I need (it's the aspnet_UsersInRoles_IsUserInRole SP). I want to reuse this SP and use it's return value as a field in the SP I'm writing. How do I go about doing this? I could take the logic out of the called SP and wrap it in a function; but, I would really like to reuse the SP aspnet_UsersInRoles_IsUserInRole. Thanks in advance for any assistance.
View 7 Replies View Relatedhi,
i'm trying to call a dts package from vb.net.
i got 2 examples which both don't work.
first one gives me a [DBNETLIB][ConnectionOpen(Connect()).]SQL Server does not exist or access denied error.
source code:Dim serverName As String = "SERVERNAME"Dim oPackage As New DTS.Package()Dim oStep As DTS.StepDim pVarPersistStgOfHost As Object = Nothing
oPackage.LoadFromSQLServer(serverName, "USERID", "PASSWORD", DTSSQLServerStorageFlags.DTSSQLStgFlag_Default, _ "DTSPASSWORD", Nothing, Nothing, "DTSPACKAGENAME", pVarPersistStgOfHost)
For Each oStep In oPackage.Steps oStep.ExecuteInMainThread = TrueNext
oPackage.Execute()
Dim err As LongDim source, description, message As StringFor Each oStep In oPackage.StepsIf oStep.ExecutionResult = DTSStepExecResult.DTSStepExecResult_Failure Then oStep.GetExecutionErrorInfo(err, source, description) message = String.Format("ErrorCode: {0}, Source: {1}, Description: {2}", err.ToString(), source, description)Else message = "Success"End IfNext
oPackage.UnInitialize()oPackage = Nothing
second example tries to create a dts package dynamically. this time i get the error that the CustomTask can not be casted, somehting about the QueryInterface.
source code:Dim oPackage As New Package2()Dim oConnection As Connection2Dim oStep As Step2Dim oTask As TaskDim oCustomTask As BulkInsertTask
oConnection = oPackage.Connections.[New]("SQLOLEDB")oStep = oPackage.Steps.[New]()oTask = oPackage.Tasks.[New]("DTSBulkInsertTask")oCustomTask = CType(oTask.CustomTask, BulkInsertTask) <-- error
With oConnection .Catalog = "CATALOG" .DataSource = "SERVERNAME" .ID = 1 .UseTrustedConnection = True .UserID = "USERID" .Password = "PASSWORD"End With
oPackage.Connections.Add(oConnection)oConnection = Nothing
With oStep .Name = "InsertGemal" .ExecuteInMainThread = TrueEnd With
With oCustomTask .Name = "InsertGemal" .DataFile = "D:ImportGemal.dat" .ConnectionID = 1 .DestinationTableName = "Gemal" .FieldTerminator = ";" .RowTerminator = "
"End With
oStep.TaskName = oCustomTask.Name
With oPackage .Steps.Add(oStep) .Tasks.Add(oTask) .FailOnError = TrueEnd With
oPackage.Execute()
oPackage.UnInitialize()oPackage = Nothing
any help highly appreciated!
t.i.a.,ratjetoes.
Hello,
I am trying to call a SQL Function in C#, as I want to get the value binded back to the column in a datagrid.
Any answers will be appreciated ...............Urgent.
:)
Hello,
I have the class below. And trying to execute it on a button click event.
What am i doing wrong ?
Thanks
Here is the button click event1 protected void Button1_Click(object sender, EventArgs e)
2 {
3 signup_data_entry signup = new signup_data_entry();
4 signup.signup_data_entry();
5
6 }
Here is my class file. please advice
1 public class signup_data_entry
2 {
3 public signup_data_entry()
4 {
5 //SqlConnection con = new SqlConnection("cellulant_ConnectionString");
6 SqlConnection con = new SqlConnection(ConfigurationManager.AppSettings["cellulant_ConnectionString"]);
7
8 SqlCommand command = new SqlCommand("Cellulant_Users_registration", con);
9 command.CommandType = CommandType.StoredProcedure;
10
11 con.Open();
12
13 //string IP = new string();
14
15
16 command.Parameters.Add(new SqlParameter("@RegionID", SqlDbType.Int, 0, "RegionID"));
17 command.Parameters.Add(new SqlParameter("@RegionDescription", SqlDbType.NChar, 50, "RegionDescription"));
18
19 command.Parameters[0].Value = 4;
20 command.Parameters[1].Value = "SouthEast";
21
22 int i = command.ExecuteNonQuery();
23
24
25 }
26 }
Hi All,
I have problem in calling the SP from ASP.NET application
@DefApp nvarchar(255)= '' ,@DefBusFunction nvarchar(255)= '' ,@DefImpact nvarchar(255) = '',AS Begin declare @sql nvarchar(4000)declare @whereClause nvarchar(4000)DECLARE @return_value intdeclare @sqlWhere nvarchar(4000) select @sql = 'SELECT DefApp, DefBusFunction, DefImpact FROM Def LEFT JOIN ZFunction ON (def.DefApp = ZFunction.App) AND (Def.DefBusFunction = ZFunction.BusFunction)' if @DefImpact <> '' Set @whereClause = ' where DefImpact ' SET @whereClause = @whereClause + ' = ''' + @DefImpact + '''' set @sqlWhere=@sql + @WhereClauseEXEC @sqlWhereEnd
and i am calling this SP from my ASP.net application to fill the SSRS report. I have written code in ASP.NET like:
sqlCmd = new SqlCommand("subbusample", conn);
sqlCmd.CommandType = CommandType.StoredProcedure;sqlCmd.Parameters.Add(new SqlParameter("@DefImpact", SqlDbType.NVarChar, 255, txtValue3.Text.ToString()));
sqlCmd.Parameters.Add(new SqlParameter("@DefBusFunction", SqlDbType.NVarChar, 255, txtValue1.Text.ToString()));
sqlCmd.Parameters.Add(new SqlParameter("@DefApp", SqlDbType.NVarChar, 255, txtValue2.Text.ToString()));
RptViewer.ProcessingMode = Microsoft.Reporting.WebForms.ProcessingMode.Remote;
RptViewer.ServerReport.ReportServerUrl = new System.Uri("http://servername/ReportServer");RptViewer.ShowParameterPrompts = false;
RptViewer.ServerReport.ReportPath = "/folder name/Subbu_Sample";
when i execute it, i am not able to fill the report with data.
Please let me know what i am doing wrong.
Thanks,
SR.
In my shared hosting environment where I am making large volumes of database calls, I am very anxious to preserve my heavily throttled threads-I presume when I make a database call, that it is going to a separate server and any threads that server may be using are in addition to my " hosting plan ".
My question (s) is, is it therefore a no-brainer to always make calls to:Dim oResult As IAsyncResult = iDBCmd.BeginExecuteReader()arWaitHandles(0) = oResult.AsyncWaitHandleiIndex = WaitHandle.WaitAny(arWaitHandles, 60000, False)
i.e. run all calls to the database asynchronously?
Is it really releasing a thread back to my asp.net App while it is waiting? (I.e. Is it worth doing)
I'm new to using DTS packages and I'm running into a problem. Hopefully someone can help me out. I have an ASP.NET page that needs to call a DTS package. Everything seems to be working right up until I call opkg.Execute. The package seems to run but nothing happens. After further investigation I have found what looks like a permissions issue. this is the message I'm getting"
Error Number:
-2147467259 {Integer}
Error Description:
"The Microsoft Jet database engine cannot open the file ''. It is already opened exclusively by another user, or you need permission to view its data." {String}
This is obviously a permissions issue. I'm just not sure who the DTS package is running as and where to set the permissions.
Any ideas????
Thanks
How to do this?thanks :-)
View 1 Replies View RelatedDoes anyone know the command that can be used to call a dts package directly from VB?
regards,
reshma
Hello,
What is the syntax of calling stored procedure from vb
Is there any1 can please give me a example of how to call sp with passing parameters, thanks a lot.
Thanks
I have a DTS package created in a databasse and need to call that DTS package from a stored procedure.Is there a way that I can do it?
View 2 Replies View RelatedIf you have a begin tran in a sp that calls another sp and that called sp fails. can you execute a roll back from the called sp, or should it return and error which will roll back the begin tran in the original sp
View 1 Replies View RelatedHi all,
I want to call dts package from visual basic. The dts package will do a backup of the database.
I am not sure how this can be achieved.
Any help will be great
Thanks
SQL Server Load Balancing -- Any ideas?
There is no inherent mechanism available in SQL Server (replication, log shipping, or clustering) which allows you to load balance you database server.
Clustering is only useful for a failover situation and does not allow active/active balancing.
Is is possible to use merge replication between two identical OLTP servers
and manage transactions via MSMQ? Will this mechanism allow for a load balanced OLTP server?
Will this work? If not, why not?
What will work? Will federated servers work for an entire database??
I need a simple example of calling a dll or exe with params
from a stored procedure.
Thanks
Robert Kapciuk
hai guys
how should we have to cal the store procedure inside the same store procedure.
for Example
Create procedure A
as
Begin
Select * from mytable
execute A
end.
is this the correct one
Is it possibe to call a Stored Proc on a remote server in a DTS package?
Thanks in advance,
John
Dear Everybody,
Hi again!
Supposing I have an SQL Server Function named Fxn1 which returns a VARCHAR(6) value. I want to use this returned value in another function named Fxn2 but Fxn2 accepts a parameter of type INT. Fxn2 itself returns an INT value. This has to be achieved in a single line.
The following line of code will not work in SQL Server. How should I achieve this?
declare @Res INT
EXEC @Res = Fxn2 (CONVERT( INT, Fxn1 ))
Thanx in advance!
I have a rather complex function (part of a production planning engine) that is written in VBA, and is part of my front end app. I'd like to be able to somehow call this function from either a sproc or DTS package in SQL. Is this possible, or am I going to have to convert the function to a SQL sproc (ugh)?
View 2 Replies View RelatedI am trying to call a VB script file with the following command,
xp_cmdshell 'cscript c:file.vbs'
But its giving the following output -
Microsoft (R) Windows Script Host Version 5.1 for Windows
Copyright (C) Microsoft Corporation 1996-1999. All rights reserved.
NULL
Input Error: Can not find script file "c:file.vbs".
NULL
------------
If i changed the command to
xp_cmdshell 'cscript c:file.vbs'
it gives the folowing error -
Input Error: Can not find script file "C:WINNTsystem32file.vbs".
Actually my main intention is to call a url from the sql server where '
i can pass some value. Plz let me know if its the right step and whts
going wrong.
Thanks & regards,
-dkoushik
create procedure t1 (@var int output)
as
begin
set @var =3
end
declare @var int
execute t1 @var output
print @var
the output is ok
but i need it like
execute t1 @var output i should get value
I was wondering if there was a way to call a stored procedure within a stored procedure, and after that's done, it goes back where the other stored procedure left off? I was also hoping to return a value also. Thank you.
View 3 Replies View Related