I was looking at a previos thread in this very queston and the answers given to it, I tried a SSIS package that works fine on its own but on creating a new job and invoke it, the JOB fails ,it says its not able to locate the file specified,
I tried copying the package to the server machine wher am creating the job,but again the same error; and when i try to alter the protection level of the SSIS package to Server Storage its throwing an error like '' This protection level cant be applied to this destination,The system can't verify that the destination supports storage capacity. this error occurs when saving to XML."
I am using OLE DB Destination in the dataflow task of the SSIS package I ve created. Please guide whr am going wrong. Some detailed steps which has some screenshots depicting step by step procedure of creating a JOB that calls a SSIS package will be highly helpful
I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
I have an SSIS package (TransAgentMaster) that I recently modified to include a call to a child package via the file system. The child package creates a text file. When I run the package in dev studio then the child package/text file is produced.
I then imported the TransAgentMaster as a stored packagesfilesystem package into SQL SSIS and executed the package. The child package produced the text file.
I then ran the SQL Server Agent to see if the child package would work and it did not generate the text file. Thus after updating a SSIS package importing the package into SSIS the job that calls the package will not call the child package. Please not that the TransAgentMaster package calls 7 children packages €¦ just not my new one.
Any thoughts why the agent will not run the child newly crated childe package?
Using a Web Service or Remote Component to Run a Remote Package Programmaticallyas per following msdn example. http://msdn2.microsoft.com/en-us/library/ms403355.aspx
my SSIS .dtsx file is on the Server having SQL Server & SSIS Installed. (Database Server)
and asp.net web service & web application is on another server, which is Application Server.
the .dtsx does simple process like executing existing Sql view from Database Server to the .csv file on the Application Server.
when I implemented the Code explained in msdn its works fine from my development machine.
but as soon as i tried to execute from running from the website, it gives following error.
The following exception occurred: Retrieving the COM class factory for component with CLSID {E44847F1-FD8C-4251-B5DA-B04BB22E236E} failed due to the following error: 80040154.
I am sure this forums must have been answered already for the this kind of problem.
If anyone can guide me for the above problem, ASAP pls.
I have built a SSIS package which runs fine in BIDS. I went into SqlServer Management Studio and created a new job and job step. When Iselect the SQL Server Integration Services Package, I get the belowerror. There are no options on selecting a SSIS package.I searched this error for about 5 hours yesterday and the onlysolution I could find was a user who rebooted their server which fixedthis problem. I did restart the server, which did not fix theproblem.Can anyone help provide more information on this problem and thesolution to it? Thank you, Jason.The specified module could not be found. (Exception from HRESULT:0x8007007E) (SqlManagerUI)------------------------------Program Location:atMicrosoft.SqlServer.Management.SqlManagerUI.DTSJob SubSystemDefinition.Microsoft.SqlServer.Management .SqlManagerUI.IJobStepPropertiesControl.Load(JobSt epDatadata)atMicrosoft.SqlServer.Management.SqlManagerUI.JobSte pProperties.UpdateJobStep()atMicrosoft.SqlServer.Management.SqlManagerUI.JobSte pProperties.typeList_SelectedIndexChanged(Objectsender, EventArgs e)at System.Windows.Forms.ComboBox.OnSelectedIndexChang ed(EventArgse)at System.Windows.Forms.ComboBox.WmReflectCommand(Mes sage& m)at System.Windows.Forms.ComboBox.WndProc(Message& m)atSystem.Windows.Forms.Control.ControlNativeWindow.O nMessage(Message& m)atSystem.Windows.Forms.Control.ControlNativeWindow.W ndProc(Message& m)at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32msg, IntPtr wparam, IntPtr lparam)
We had a scenario where we used to run the Process from front end thru application. on the back ground the the process call the SP & from there it calls the SSIS package then again to SP.
after SSIS package ran succesfully it will be updated on a table with sucess then call the SP & deletes the entry from the other table but in one scenario Package was success but the entry was not getting deleted as the process takes almost 2-3 hours loading 60 millions records. but the process was running in SQL 2008 but once we upgraded to SQL 2012 its not working for one application. its not returning any error as timeout also. we tried changing the server level setting for remote query time out also to 0 but no luck .
It runs fine on my machine; however, on anyone elses machine "result" comes back as "failure". We have figured out that it is loading the package and variables fine but failing before the first step of the package. Does anyone know why this would be? Or how to fix it? I am totally stumped considering it works fine on my machine.
I have a SSIS-Package stored in the SQL Server. This package works fine when i execute it from the SQL Server. But if I try to execute the package from a COM+-Application, nothing happens.
Here is my code snipped:
Public Function ExecutePackage €¦ Dim myPackage As New Package Dim app As New Application Dim pkgResults As DTSExecResult
'----- Execute the package from SQL Server myPackage = app.LoadFromSqlServer("\PackageName", "ServerInstance", Nothing, Nothing, Nothing) pkgResults = myPackage.Execute() €¦
End Function
In a Windows Forms Application I can execute the package with this code snipped succesfully. Therefor I think that the problem is my COM+-Application.
Can you call a SSIS package from Web services? I would like to create a web services that can call a SSIS package ( generate a text file).. If it is possible, Can someone show me code examples?
I'm trying to call a SSIS package as my data source for SQL reporting service but I keep getting the error "Cannot create a connection to data source 'DsSSIS'.
My DsSSIS consists of the following in the connection string.
I have written package which goes through a directory and load all the files with certain criteria. I have set the package to run using package configuration. It does work fine.
when calling an SSIS package from a trigger causes it to run for ever. Know why??
In Detail;
Consider that there are two tables with the same schema in a db. Lets name that Test1 and Test2. I develope a package whihc will transform data from Test1 to Test2. I initiate this package from a Trigger for Insert on Test1. For eg.
This runs for ever when a record is inserted into the Test1 table.
But, when the trigger is on someother table , everything works fine.For eg, if the trigger is on the table TT1 & this trigger initiates the same package while inserting a record into TT1, everything is fine.
All, I am developing the data mart refresh task in SSIS. I wanted to call the package in command prompt. I need help. Can any one give any tips on it. Thanks and appricate in advance.
I'm trying to create a stored procedure which will run 2 SSIS packages before it runs some other SQL code. I read [url=http://msdn2.microsoft.com/en-us/library/ms162810.aspx]this[/url] article. I'm trying to use the package from the file system.
Here is the my code:
CREATE PROCEDURE usp_participant_limits_report AS dtexec /f "C:....Activity_Limits.dtsx" GO
The error message says it doesn't like the "/". Anyone?
I am calling Store Procedure from my C# Code and inside the SP, I am calling my SSIS Package.It is working fine. On my local because I have all rights to run xp_cmdshell COMMAND. Now I have to transfer this SP to QA and Prod and I don't have rights to run xp_cmdshell COMMAND.
Here is my SP.
declare @cmd varchar(1000) SET @ssispath = 'SSIS Package Path where my .dtsx package' set @ExcelF = 'Passing My source file name and full path'
Posted the same message to the Service Broker forum. But the board is neither responsive nor active. So I am trying this forum. Hope someone can help.
I would like to call an SSIS package from a Service Broker Queue.
There is one way that I am aware of -
Using xp_cmdshell from within an activation stored procedure and using DTEXEC.
Is there a more elegant way of executing an SSIS package from within SSB?
Also, I am not interested in writing a .NET external activator to process my messages in the queue. I would like this operation to be strictly database oriented. Having said this, I am also trying to avoid triggers processing the messages in the queue.
1. (calls an oracle package) - call lpaarchive.pibrdg.setlastbridgeruntime(sysdate);
2. (selects rows) - select timestamp ,
pitag ,
rtlmp from LPAARCHIVE.I_PIBRDG_BUS5MINRTLMPS
where timestamp <= (sysdate + 0.002777778)
order by TIMESTAMP ASC; I need to execute these 2 statements together. I tried using Execute SQL task to call the package and then an OLEDB source that calls a variable with the select statement. But it does not retrieve any rows. It seems like the result of calling the package is used by the select statement to give the final rows. Could anyone please help me resolve this issue.
It's been a while since I post here. Anyway, I'm trying to call a SSIS package as my data source for SQL reporting service but I keep getting the error "Cannot create a connection to data source 'DsSSIS'.
My DsSSIS consists of the following in the connection string.
I would like to find out how would I call an AS400 (IBM DB2) iSeries Stored Procedure from within my SSIS Package. What tasks should i be using? and do I need any additional adapters installed on my machine to access AS400(IBM DB2). Thanks.
I am trying to call a SSIS package from a web service hosted on the same machine as the package file is sitting. All that the package does is a simple Execute SQL task with one datasource connection.
I have set impersonation as true. When I run the package from the web service on the virual port (through Visual studio IDE) it runs fine.
I have enabled logging in SSIS. The package log indicates the following:
Failed to acquire connection "APNetDS". Connection may not be configured correctly or you may not have the right permissions on this connection.
Effectively, my web service impersonated account (which is my admin account) is not being authenticated for any of the db connection (uses windows integrated authentication) and I find that odd. To impersonate, I have set the Impersonation to true in the web.config file. The authentication mode is windows.
Please tell me what bit of security I am missing? In case if it helps, the database connection is to my local database and hence should not deny access to my own account. And yes, I think my impoersonation is working because when I debug, the user.identity shows my user id.
Need some clarification on calling an SSIS package from SSRS. I have managed to get this to work, but only if I actually build the SSIS package on the report server machine.My SSIS package is very simple it. The control flow is a single data flow task. Within the data flow task is an ole db data source and a data reader destination. I verified that the package works in BIDS.  If I build it and deploy it on the report server I can execute it just fine from integration services (using the dtexec UI panel) in SSMS, no validation errors and no execution errors.If I try to build a dataset (specifying SSIS as the data source type) then immediately on referencing the package I get a "Package failed to validate error". However, if I bring the whole project over to the report server and build it then I can reference it from my Report Services project.  I'm using package deployment security of "Don't Save Sensitive" for the SSIS package with the 'sa' login. After the deployment package is built I edit the connection string to include the password.The remote execution account for the Report Server is set to the administrator of the box. I know these account permissions are overkill, but I'll iron all that out once I get the basic pieces in place and working.
My project currently has task which have their own individual event handlers that get called onError (setup event messages). I also have a package level event handler that performs a generic task (sending events to the windows eventviewer) In the package level event handler there is a script task that decides on a boolean variable whether to "Success" or "Failure" to different task. When I fail one task of the main control flow, the task level event handler runs, then the package level event handler runs, and then it also runs again for some unknown reason. The second time it runs it picks up the value of a variable set in the variables window. However, I change this value at runtime to the value from a database. I can't understand why it would run the second time, and if it did run why it would have the value from the variables window and not the value that is set in memory. It's like the event handler runs with the value from memory and then runs and picks the values back out of the variables window, replacing the db values and re-runs.
Maybe the package itself is failing all together and then re-runing the package level event handler?
I am trying to execute an SSIS package from an MS Access 2003 database that imports a table from the Access database into a target table in SQL 2005. I saved the package in SQL 2005 and tested it out. If I run it from the Management Studio Console with Run->Execute ... everything works just fine. However, if I try to run it using "Exec master.dbo.xp_cmdshell 'DTExec /SER DATAFORCE /DTS SQL2005TestPackage /CHECKPOINTING OFF /REPORTING V'" the execution will always fail when the Access database is open (shared mode). It will only work when the Access database is not open. The connection manager looks like this: "Data Source=E:Test.mdb;Provider=Microsoft.Jet.OLEDB.4.0;Persist Security Info=False;Jet OLEDB:Global Bulk Transactions=1". The error is listed below:
Code: 0xC0202009 Source: NewPackage Connection manager "SourceConnectionOLEDB" Description: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Could not use ''; file already in use.".
I've imported an SSIS package into Management Studio (2008 R2) and I've set up a SQL Server Agent job to call the package but it fails due to error code: 0xc00160aa.
As far as I can tell this is because it is unable to read the location of the package despite it being a file system location within Management studio. Also I can run the package manually within Management Studio, but when I try to call it via the job it fails.
When running an integration services package from a windows service I get the "Object ... has been disconnected or does not exist at the server." exception after aproximately six minutes of execution.
This is *not* my windows service failing. I can loop indefinately while tracing to a log file within the service and it will run forever. While calling the mypackage.execute(...) method however, after six minutes (give or take) the exception is thrown...
my code looks something like this: <code> dim foo as Microsoft.SqlServer.Dts.Runtime.Application mypackage = foo..LoadPackage(strimportPkgFilename, pkgevents) results = myPackage.Execute(Nothing, Nothing, pkgevents, Nothing, Nothing) </code>
<error> A first chance exception of type 'System.Runtime.Remoting.RemotingException' occurred in mscorlib.dll Exception in: frmMyForm.DoImports Message: Object '/b76f98a0_5bd9_49d8_a524_eeb49d55b303/bqbhkjnaofq_ifr_cwz+srid_1.rem' has been disconnected or does not exist at the server. </error>
oddly, this same code works perfectly if I run it within a windows form application no matter how long it takes.
It also runs fine if the package can complete in under six minutes.
I have a SQL2000 DTS package that executes vbscript to loop through a recordset which:
- runs a stored procedure and populated tables
- builds a recordset from the populated tables to write records to an Excel file
- writes status to text files with either the error or success notices
I use FSO to set up the success and error files, but the scheduled job in SQL2005 which calls the SSIS package returns the following error:
"Retrieving the file name for a component failed with error code 0x0015F74C"
I can successullly run this (vbscript) in both the SSIS package via the BI Development Studio and in MS Access (exactly the same code in both) - but not as a SSIS package called in a scheduled job in SQL2005.
I am at an impasse with this ... any and ALL assistance would be GREATLY appreciated.
I need to pass variables from the parent package to the child package. I got this to work in a small test case. But in the actual project, I get an error when I try to do that. The parent package's log has this error :
Error: Error 0xC0012050 whike loading package file "c:.......". Package failed validation from the ExecutePackage task. The package cannot run..
Hey, I've a few jobs which call SSIS packages. If I run the SSIS package, it runs fine but if I try to run the job which calls this package, it fails. Can someone help me troubleshoot this issue? None of my jobs that call an SSIS package work. All of them fail.
hi, i'm trying to call a dts package from vb.net. i got 2 examples which both don't work. first one gives me a [DBNETLIB][ConnectionOpen(Connect()).]SQL Server does not exist or access denied error. source code:Dim serverName As String = "SERVERNAME"Dim oPackage As New DTS.Package()Dim oStep As DTS.StepDim pVarPersistStgOfHost As Object = Nothing oPackage.LoadFromSQLServer(serverName, "USERID", "PASSWORD", DTSSQLServerStorageFlags.DTSSQLStgFlag_Default, _ "DTSPASSWORD", Nothing, Nothing, "DTSPACKAGENAME", pVarPersistStgOfHost) For Each oStep In oPackage.Steps oStep.ExecuteInMainThread = TrueNext oPackage.Execute() Dim err As LongDim source, description, message As StringFor Each oStep In oPackage.StepsIf oStep.ExecutionResult = DTSStepExecResult.DTSStepExecResult_Failure Then oStep.GetExecutionErrorInfo(err, source, description) message = String.Format("ErrorCode: {0}, Source: {1}, Description: {2}", err.ToString(), source, description)Else message = "Success"End IfNext oPackage.UnInitialize()oPackage = Nothing second example tries to create a dts package dynamically. this time i get the error that the CustomTask can not be casted, somehting about the QueryInterface. source code:Dim oPackage As New Package2()Dim oConnection As Connection2Dim oStep As Step2Dim oTask As TaskDim oCustomTask As BulkInsertTask oConnection = oPackage.Connections.[New]("SQLOLEDB")oStep = oPackage.Steps.[New]()oTask = oPackage.Tasks.[New]("DTSBulkInsertTask")oCustomTask = CType(oTask.CustomTask, BulkInsertTask) <-- error With oConnection .Catalog = "CATALOG" .DataSource = "SERVERNAME" .ID = 1 .UseTrustedConnection = True .UserID = "USERID" .Password = "PASSWORD"End With oPackage.Connections.Add(oConnection)oConnection = Nothing With oStep .Name = "InsertGemal" .ExecuteInMainThread = TrueEnd With With oCustomTask .Name = "InsertGemal" .DataFile = "D:ImportGemal.dat" .ConnectionID = 1 .DestinationTableName = "Gemal" .FieldTerminator = ";" .RowTerminator = " "End With oStep.TaskName = oCustomTask.Name With oPackage .Steps.Add(oStep) .Tasks.Add(oTask) .FailOnError = TrueEnd With oPackage.Execute() oPackage.UnInitialize()oPackage = Nothing any help highly appreciated! t.i.a.,ratjetoes.
I'm new to using DTS packages and I'm running into a problem. Hopefully someone can help me out. I have an ASP.NET page that needs to call a DTS package. Everything seems to be working right up until I call opkg.Execute. The package seems to run but nothing happens. After further investigation I have found what looks like a permissions issue. this is the message I'm getting" Error Number: -2147467259 {Integer}
Error Description: "The Microsoft Jet database engine cannot open the file ''. It is already opened exclusively by another user, or you need permission to view its data." {String}
This is obviously a permissions issue. I'm just not sure who the DTS package is running as and where to set the permissions.
