Calling Stored Proc B From Stored Proc A

Jan 20, 2004

Hi all

I have about 5 stored procedures that, among other things, execute exactly the same SELECT statement

Instead of copying the SELECT statement 5 times, I'd like each stored proc to call a single stored proc that executes the SELECT statement and returns the resultset to the calling stored proc

The SELECT statement in question retrieves a single row from a table containing 10 columns.

Is there a way for a stored proc to call another stored proc and gain access to the resultset of the called stored proc?

I know about stored proc return values and about output parameters, but I think I am looking for something different.

Thanks

View 14 Replies


ADVERTISEMENT

Stored Proc - Calling A Remote Stored Proc

Aug 24, 2006

I am having trouble executing a stored procedure on a remote server. On my
local server, I have a linked server setup as follows:
Server1.abcd.myserver.comSQLServer2005,1563

This works fine on my local server:

Select * From [Server1.abcd.myserver.comSQLServer2005,1563].DatabaseName.dbo.TableName

This does not work (Attempting to execute a remote stored proc named 'Data_Add':

Exec [Server1.abcd.myserver.comSQLServer2005,1563].DatabaseName.Data_Add 1,'Hello Moto'

When I attempt to run the above, I get the following error:
Could not locate entry in sysdatabases for database 'Server1.abcd.myserver.comSQLServer2005,1563'.
No entry found with that name. Make sure that the name is entered correctly.

Could anyone shed some light on what I need to do to get this to work?

Thanks - Amos.

View 3 Replies View Related

Calling A Stored Proc From Within Another Stored Proc

Feb 20, 2003

I have seen this done by viewing code done by a SQL expert and would like to learn this myself. Does anyone have any examples that might help.

I guess I should state my question to the forum !

Is there a way to call a stored proc from within another stored proc?

Thanks In Advance.

Tony

View 1 Replies View Related

Calling T SQL Stored Proc From CLR Stored Proc

Aug 30, 2007

I would like to know if the following is possible/permissible:

myCLRstoredproc (or some C# stored proc)
{
//call some T SQL stored procedure spSQL and get the result set here to work with

INSERT INTO #tmpCLR EXECUTE spSQL
}

spSQL
(

INSERT INTO #tmpABC EXECUTE spSQL2
)


spSQL2
(
// some other t-sql stored proc
)


Can we do that? I know that doing this in SQL server would throw (nested EXECUTE not allowed). I dont want to go re-writing the spSQL in C# again, I just want to get whatever spSQL returns and then work with the result set to do row-level computations, thereby avoiding to use cursors in spSQL.

View 2 Replies View Related

Calling A Stored Procedure From Within A Stored Proc

Dec 18, 2007

Hi Peeps
I have a SP that returns xml
I have writen another stored proc in which I want to do something like this:Select FieldOne, FieldTwo, ( exec sp_that_returns_xml ( @a, @b) ), FieldThree from TableName
But it seems that I cant call the proc from within a select.
I have also tried
declare @v xml
set @v = exec sp_that_returns_xml ( @a, @b)
But this again doesn't work
I have tried changing the statements syntax i.e. brackets and no brackets etc...,
The only way Ive got it to work is to create a temp table, insert the result from the xml proc into it and then set @v as a select from the temp table -
Which to be frank is god awful way to do it.
 Any and all help appreciated.
Kal

View 3 Replies View Related

Calling CLR Stored Proc

Apr 15, 2008

For a new web project I am working on I wrote a couple of Stored Procs in C#.  I have deployed them to the database, and can run them fine using SQL Mgmt Studio.  The problem is that when I try and run them from my application, I get a 'The Stored Procedure 'ProcName' does not exist' error message.  I orignally thought it might be a permissions issue, so I changed my connection string to connect as 'sa' and it still got the same error.  I am using the Microsoft.Practices.EnterpriseLibrary to connect to the database.  Any ideas on what I need to do to get this to work?

View 1 Replies View Related

Calling DLL From A Stored Proc

Jan 8, 2003

I need to call a DLL from with one of my stored procedures. How do I achieve this?

The DLL is currently on App server (Not on the SQL Server box). Do I have to register this DLL on my SQL server, create an extended stored proc and call it from my stored proc?

Please throw some light on this topic.

Thanks,
Varma

View 3 Replies View Related

What Is Calling A Stored Proc?

Apr 24, 2007

How can I find what is calling a stored proc in a database or on the server?


Currently a job runs daily that calls a couple of DTS packages. Somewhere in this process a stored proc is being called that pumps out several emails. BUT nowhere in the DTS or job can I find any reference to the stored proc.

View 3 Replies View Related

Calling At Stored Proc (DHL)

Sep 17, 2007

I would like to know how to call a Stored Proc with in code. Have an SQL code but need data from a table that needs to be updated by a Stored Proc. Would need to call proc in the middle of code to get the correct data. Just not sure of what the statement looks like to call the proc. Thank you for your help. David (DHL)

View 9 Replies View Related

Can You Trace Into A Stored Proc? Also Does RAISERROR Terminate The Stored Proc Execution.

Feb 13, 2008

I am working with a large application and am trying to track down a bug. I believe an error that occurs in the stored procedure isbubbling back up to the application and is causing the application not to run. Don't ask why, but we do not have some of the sourcecode that was used to build the application, so I am not able to trace into the code.
So basically I want to examine the stored procedure. If I run the stored procedure through Query Analyzer, I get the following error message:
Msg 2758, Level 16, State 1, Procedure GetPortalSettings, Line 74RAISERROR could not locate entry for error 60002 in sysmessages.
(1 row(s) affected)
(1 row(s) affected)
I don't know if the error message is sufficient enough to cause the application from not running? Does anyone know? If the RAISERROR occursmdiway through the stored procedure, does the stored procedure terminate execution?
Also, Is there a way to trace into a stored procedure through Query Analyzer?
-------------------------------------------As a side note, below is a small portion of my stored proc where the error is being raised:
SELECT  @PortalPermissionValue = isnull(max(PermissionValue),0)FROM Permission, PermissionType, #GroupsWHERE Permission.ResourceId = @PortalIdAND  Permission.PartyId = #Groups.PartyIdAND Permission.PermissionTypeId = PermissionType.PermissionTypeId
IF @PortalPermissionValue = 0BEGIN RAISERROR (60002, 16, 1) return -3END 
 

View 3 Replies View Related

Calling Stored Proc In ActiveX Script

Dec 13, 2005

Hi!

How do you call a store procedure in an ActiveX script? I have a stored procedure that I want to execute everytime my Data Driven Query tasks inserts a new record.

Thanks.

View 2 Replies View Related

Calling Stored Proc. Multiple Times...

Feb 1, 2008

I have basic SQL query that returns a one column result set. For each row returned in this result set, I need to pass the value in the column to a stored procedure and get back a result set.

I have 2 solutions, neither of which are very elegant. I'm hoping someone can point me in a better direction.

Solution 1:
Use a cursor. The cons here, are the SP returns a result set on each pass which generates multiple result sets overall. If there is a way to combine these result sets, I think this solution might work.

Solution 2:
Use a temp table or table variable.
The cons here are, if the schema of the result set returned from the stored procedure changes, the table variable will have to change to accommodate it. This is a dependency I'd rather not create.

Any help is very much appreciated.

View 2 Replies View Related

How To Specifiy An Output Parameter When Calling Stored Proc In C#

Oct 2, 2007

How do I specify a parameter as an output parameter --> OUTPUT paramI am referring to how to do this on line 10 below
1 int GetTheReturnValue=0;2//Code not shown//
9  mySqlCommand.Parameters.Add("@returnParameter", SqlDbType.Int, 10).Value = 0;  // How to specify output param?10 GetTheReturnValue=mySqlCommand.ExecuteNonQuery();

View 7 Replies View Related

Calling Stored Proc With Default Params From .NET Not Working.

Mar 20, 2006

All,
I have the following :
ALTER PROCEDURE [dbo].[sp_FindNameJon]

@NameName varchar(50)='',
@NameAddress varchar(50)='',
@NameCity varchar(50)='',
@NameState varchar(2)='',
@NameZip varchar(15)='',
@NamePhone varchar(25)='',
@NameTypeId int=0,
@BureauId int,
@Page int=1,
@Count int=100000
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
DECLARE @SqlString nvarchar(3000),@SelectClause nvarchar(1000), @FromClause nvarchar(1000),@WhereClause nvarchar(1000)
DECLARE @ParentSqlString nvarchar(4000)
DECLARE @Start int, @End int
INSERT into aaJonTemp values (@Page, 'here2', @NameCity);
 
And inside of aaJonTemp, I have the following :




NULL
here2
NULL

NULL
here2
NULL
 
How is this possible?  If @Page or @NameCity is NULL, how come it doesn't default to a value in the stored proc?
 
Thx
jonpfl

View 1 Replies View Related

Problem In Calling A Stored Proc With OUTPUT Parms

Sep 26, 2000

I have a problem in calling a procedure.
It has two input parameters and seven(7) output parms.

When I run it this way:

exec usp_List_Relationship_Users @relationship_id = 1851 ,
@status = 'Channel Member',
@cust_idOUTPUT,
@user_login_id OUTPUT,
@username OUTPUT,
@password OUTPUT,
@status_id OUTPUT,
@sdesc OUTPUT,
@administrator OUTPUT

I get this error:
Server: Msg 119, Level 15, State 1, Line 10
Must pass parameter number 3 and subsequent parameters as '@name = value'. After the form '@name = value' has been used, all subsequent parameters must be passed in the form '@name = value'.

But when I run it this way :
exec usp_List_Relationship_Users 1851 ,
'Channel Member',
@cust_idOUTPUT,
@user_login_id OUTPUT,
@username OUTPUT,
@password OUTPUT,
@status_id OUTPUT,
@sdesc OUTPUT,
@administrator OUTPUT

I get the expected results. Why should I omit the name of the name of the input parameters? I don't know why I am getting this error if don't run by ommitting the name of the input params.

Any help regarding this matter is greatlt appreciated.
You can assume that all the variables are declared prior to executing the stored procedure.

Regards
Sushruth Nanduri.

View 3 Replies View Related

Strange Results When Calling A Sql Stored Proc From Within An Access2000 Project

Nov 18, 2006

Hi,I have written a stored procedure which includes a DATEPART command, i.e.DATEPART(weekday, <date>)The result when ran from SQL Query Analyser is as expected . i.e. Sundayreturns 1, Monday 2, etcWhen the same proc is called from within the Access 2000 project Sundayis returned as 7, Saturday as 6 instead of 1 and 7 respectively.Basically the same stored proc returns different data depending on fromwhere it has been called.This is causing some issues obviously as the resulting tables andreports are showing incorrect data when presented in Access 2000.Has anyone else experienced this before or have any idea what may cause it.Regards,PB

View 1 Replies View Related

Best Practice For A Long Running Queries / Asynchronously Calling A Stored Proc?

May 23, 2008

All -

I am using SQL Server 2005 and I have an endpoint that exposes some stored procedures as web-methods in the endpoint.

One particular stored procedure I have exposed takes a long time to execute: about 10 - 15 minutes. While, it is OK, that this stored procedure takes this long, it is not desirable for the HTTP Request that executed this proc to not wait for that long.

What I want to be able to do is to call the stored procedure and have the call return immidetaly but the stored proc continues what its doing. I will call another stored proc at a later time to retrive the result of the first stored proc. The first proc will store its results in a temp table. I am thinking of using SQL Server Service Broker to achieve this.

Is there a better a way to achieve this? And how does SQL Server process the Service Broker requests, i.e., I dont want the query to be executed when the server is busy. Are there any hints that I need to give to Service Broker to be able to do this?

Thanks.

View 5 Replies View Related

Stored Proc Question : Why If Exisits...Drop...Create Proc?

Jun 15, 2006

Hi All,Quick question, I have always heard it best practice to check for exist, ifso, drop, then create the proc. I just wanted to know why that's a bestpractice. I am trying to put that theory in place at my work, but they areasking for a good reason to do this before actually implementing. All Icould think of was that so when you're creating a proc you won't get anerror if the procedure already exists, but doesn't it also have to do withCompilation and perhaps Execution. Does anyone have a good argument fordoing stored procs this way? All feedback is appreciated.TIA,~CK

View 3 Replies View Related

ASP Cannot Run Stored Proc Until The Web User Has Run The Proc In Query Analyzer

Feb 23, 2007

I have an ASP that has been working fine for several months, but itsuddenly broke. I wonder if windows update has installed some securitypatch that is causing it.The problem is that I am calling a stored procedure via an ASP(classic, not .NET) , but nothing happens. The procedure doesn't work,and I don't get any error messages.I've tried dropping and re-creating the user and permissions, to noavail. If it was a permissions problem, there would be an errormessage. I trace the calls in Profiler, and it has no complaints. Thedatabase is getting the stored proc call.I finally got it to work again, but this is not a viable solution forour production environment:1. response.write the SQL call to the stored procedure from the ASPand copy the text to the clipboard.2. log in to QueryAnalyzer using the same user as used by the ASP.3. paste and run the SQL call to the stored proc in query analyzer.After I have done this, it not only works in Query Analyzer, but thenthe ASP works too. It continues to work, even after I reboot themachine. This is truly bizzare and has us stumped. My hunch is thatwindows update installed something that has created this issue, but Ihave not been able to track it down.

View 1 Replies View Related

Stored Proc Calls Another Stored Proc

Jan 13, 2006

Hi all,

I have a stored procedure "uspX" that calls another stored procedure "uspY" and I need to retrieve the return value from uspY and use it within uspX. Does anyone know the syntax for this?

Thanks for your help!
Cat

View 5 Replies View Related

Execute Stored Procedure Y Asynchronously From Stored Proc X Using SQL Server 2000

Oct 14, 2007

I am calling a stored procedure (say X) and from that stored procedure (i mean X) i want to call another stored procedure (say Y)asynchoronoulsy. Once stored procedure X is completed then i want to return execution to main program. In background, Stored procedure Y will contiue his work. Please let me know how to do that using SQL Server 2000 and ASP.NET 2.

View 3 Replies View Related

How Can I Call One Or More Stored Procedures Into Perticular One Stored Proc ?

Apr 23, 2008

Hello friends......How are you ? I want to ask you all that how can I do the following ?
I want to now that how many ways are there to do this ?



How can I call one or more stored procedures into perticular one Stored Proc ? in MS SQL Server 2000/05.

View 1 Replies View Related

Calling A Proc From A Proc

Jan 10, 2007

I'm having problems calling my second proc (MyProcedure2) from within anexisting proc. MyProcedure2 does not seeem to fire this way. My code isbelow. Help appreciated.Thanks,TrevorALTER procedure dbo.MyProcedure1(@newsletterid int)ASSET NOCOUNT ON-- Return Subscribersdeclare @howmany intset @howmany=isnull((select count(subscriberid) from mySubscribers wherenewsletterid=@newsletterid),0)update Mynewsletters set status=3,howmany=@howmany wherenewsletterid=@newsletteridselect @howmanyexec MyProcedure2*** Sent via Developersdex http://www.developersdex.com ***

View 4 Replies View Related

Under Which Filegroup Are Stored Proc. Stored?

Aug 23, 2007

When you create a Stored procedure, is it automatically stored under the default Filegoup?

How can I see under which Filegroup my Stored Procedures and Triggers are stored?

View 2 Replies View Related

FoxPro Triggers Call FoxPro Stored Proc Calls SQL Server Stored Procedure

Mar 10, 2005

I didn't want to maintain similar/identical tables in a legacy FoxPro system and another system with SQL Server back end. Both systems are active, but some tables are shared.

Initially I was going to use a Linked Server to the FoxPro to pull the FP data when needed. This works. But, I've come up with what I believe is a better solution. Keep in mind that these tables are largely static - occassional changes, edits.

I will do a 1 time DTS from FP into SQL Server tables.

I then create INSERT and UPDATE triggers within FoxPro.

These triggers fire a stored procedure in FoxPro that establishes a connection to the SQL Server and fire the appropriate stored procedure on SQL Server to CREATE and/or UPDATE the corresponding table there.

In the end - the tables are local to both apps.

If the UPDATES or TRIGGERS fail I write to an error log - and in that rare case - I can manually fix. I could set it up to email me from within FoxPro as well if needed.

Here's the FoxPro and SQL Server code for reference for the Record Insert:

FOXPRO employee.dbf InsertTrigger:
employee_insert_trigger(VAL(Employee.ep_pk),Employ ee.fname,Employee.lname,Employee.email,Employee.us er_login,Employee.phone)

FOXPRO corresponding Stored Procedure:
FUNCTION EMPLOYEE_INSERT_TRIGGER
PARAMETERS wepk,wefname,welname,weemail,WEUSERID,WEPHONE

nhandle=SQLCONNECT('SS_PDITHP3','userid','password ')

IF nhandle<0
m.errclose=.f.
IF !USED("errorlog")
USE tisdata!errorlog IN SELECT(1)
m.errclose=.t.
ENDIF

SELECT errorlog
INSERT INTO errorlog (date, time, program,source,user) ;
values (DATE(), TIME(), 'EMPLOYEE_INSERT_TRIGGER','nhandle<0 PARAMS: '+STR(wepk)+wefname+welname+weemail+WEUSERID+WEPHO NE,GETENV("username"))

IF m.errclose
USE IN errorlog
ENDIF
RETURN

ENDIF
nquery="exec ewo_sp_insertNewEmployee @WEPK ="+STR(wepk)+",@WEFNAME ='"+wefname+"',@WELNAME ='"+welname+"',@WEEMAIL ='"+weemail+"',@WEUSERID ='"+weuserid+"',@WEPHONE='"+wephone+"',@RETCODE =0"
nsucc=SQLEXEC(nhandle,nquery)

SQLDISCONNECT(nhandle)

IF nSucc<0
m.errclose=.f.
IF !USED("errorlog")
USE tisdata!errorlog IN SELECT(1)
m.errclose=.t.
ENDIF

SELECT errorlog
INSERT INTO errorlog (date, time, program,source,user) ;
values (DATE(), TIME(), 'EMPLOYEE_INSERT_TRIGGER','nSucc<0 PARAMS: '+STR(wepk)+wefname+welname+weemail+WEUSERID+WEPHO NE,GETENV("username"))

IF m.errclose
USE IN errorlog
ENDIF
ENDIF

RETURN

SQL SERVER Stored Procedure called from FOXPRO Stored Procedure
CREATE procedure ewo_sp_insertNewEmployee (
@WEPK int,
@WEFNAME char(20),
@WELNAME char(20),
@WEEMAIL char(50),
@WEUSERID char(15),
@WEPHONE char(25),
@RETCODE int OUTPUT
)

AS

insert into WO_EMP (
WE_PK,
WE_FNAME,
WE_LNAME,
WE_EMAIL,
WE_USERID,
WE_PHONE
)

VALUES (
@WEPK,
@WEFNAME,
@WELNAME,
@WEEMAIL,
@WEUSERID,
@WEPHONE
)


IF @@ERROR <> 0
BEGIN
SET @RETCODE=@@ERROR
END
ELSE
BEGIN
-- SUCCESS!!
SET @RETCODE=0
END

return @RETCODE
GO

View 2 Replies View Related

Sql And Stored Proc

Jul 19, 2007

Im trying to perform an update with a stored procedure thats all working but
 an exception is thrown ....violation of primary key contraint....cannot insert duplicate pri key
I understand whats going on but how do you update some ones details if its protected this way.
?

View 3 Replies View Related

Help With SQL Stored Proc

Feb 22, 2008

I have a stored procedure , where i want to return identity column after insert but before insert i want to check if the record exist then select its identity value to return , after select statement it is retutrning null  CREATE PROCEDURE SP_Attendance1 (@DIVISIONID int,@EMPLOYEEID int,@CALLDATE datetime,@RECEIVEDDATE datetime,@DOC datetime,@SYSTEMNAME VARCHAR(20),@DELETED int,@attendanceID int output) AS---DECLARE @ID intIF EXISTS (SELECT ID  FROM TBLATTENDANCE WHERE EMPLOYEEID = @EMPLOYEEID AND YEAR ( CALLDATE ) = YEAR ( @CALLDATE)AND MONTH (CALLDATE) = MONTH ( @CALLDATE) AND DAY (CALLDATE) = DAY ( @CALLDATE)  )BEGIN SET  @attendanceID = SCOPE_IDENTITY()END ELSE BEGIN INSERT INTO TBLATTENDANCE  (DIVISIONID ,EMPLOYEEID ,CALLDATE , RECEIVEDDATE ,DOC,SYSTEMNAME ,DELETED )VALUES  (@DIVISIONID ,@EMPLOYEEID ,@CALLDATE , @RECEIVEDDATE ,@DOC,@SYSTEMNAME ,@DELETED ) ;SELECT DIVISIONID, EMPLOYEEID, CALLDATE, RECEIVEDDATE, DOC, SYSTEMNAME, DELETED,ID  FROM TBLATTENDANCE WHERE (ID = SCOPE_IDENTITY())SELECT  @attendanceID = SCOPE_IDENTITY()ENDGO  Kindly help with this  

View 5 Replies View Related

SQL Stored Proc

Jan 15, 2004

Hi,

I am trying to create a stored proc, that delivers a recordset, per the user requirements BUT,

I want to create a Geneirc search Proc that can handle a few criteria

I was wondering if it is possible to create a VB like Select case
depending on Information supplied to the stored proc

i.e
@Loc_Thing
@Loc_OtherThing

SELECT FirstName,LastName,CIty,Job,,Company,Webpage FROM RECORDSET WHERE
Select case @Loc_Thing
Case "Mickey"
LastName = @Loc_OtherThing
Case "Walt"
Company = @Loc_OtherThing

...... etc

is it possible to create a strored proc like this?
I have found a Select case in SQL, but it doesn't work I would like it?
Any Idea's?

View 1 Replies View Related

My First Stored Proc

Nov 29, 2004

Hello,
So I created my first SP today which returned data to populate a datagrid. Worked to perfection. Now I'm trying to do a simple login and I'm having a hard time getting it together. I want the user to enter in a username and pass then if user exists, to return their userid and update their last login date. But I can't get it. Any help would be awesome.

Here's my SP...

CREATE PROCEDURE [dbo].[userLogin] @username varchar(50), @pass varchar(50) AS

declare @x int
declare @userid int


if exists (SELECT userid FROM users WHERE username = @username AND password = @pass)
set @x = 1
else
set @x = 0

if @x = 1
UPDATE users SET lastlogin = getdate() WHERE userid = (SELECT userid AS name FROM users WHERE username = @username AND password = @pass)
else
return '0'

if @x = 1
SET @userid = (SELECT userid FROM users WHERE username = @username AND password = @pass)
return @userid
GO


Any constructive criticism on my SP is welcome. Also, should I be using Print or Return if I want to send back a value to my VB code?

And my VB:

Dim user As String = txtUsername.Text
Dim pass As String = txtPassword.Text
Dim objDataSet As DataSet
Dim objAdapter As SqlDataAdapter

Try
Dim cmd As New SqlCommand

'Enter Param's here
Dim myParam1 As SqlParameter = cmd.Parameters.Add("@username", SqlDbType.VarChar)
Dim myParam2 As SqlParameter = cmd.Parameters.Add("@pass", SqlDbType.VarChar)

myParam1.Value = user
myParam2.Value = pass

objAdapter = New SqlDataAdapter
objAdapter.SelectCommand = cmd
objAdapter.SelectCommand.Connection = SqlConn
objAdapter.SelectCommand.CommandType = CommandType.StoredProcedure
objAdapter.SelectCommand.CommandText = "userLogin"

SqlConn.Open()

Dim str As String = cmd.Parameters("@userid").Value()
cmd.ExecuteNonQuery()
If str = "0" Then
'Error Login Page
Response.Redirect("login_err.aspx")
Else
Session("userid") = str
Response.Redirect("home.aspx")
End If

SqlConn.Close()

Catch ex As SqlException
SqlConn.Close()
End Try

View 4 Replies View Related

Need Help With Stored Proc

Feb 13, 2006

I have 2 tables, lets say: Table1 and Table2.

Table1 has an ID field that is unique (PK).

Table2 has the same ID field and a date field which are both
unique (PK, FK)

 

I need to write a stored procedure that will query the ID
field from table1 like

Select distinct(id) from Table1

 

Would return:

ID

1

2

3

4

5

 

Now on the first of every month I want a job to run that
would create a new record for EACH ID from the above query.  The new record would be created in Table2
with the ID and a date (that I will determine), resulting in:

 

ID        DATE

1          01/01/06

2          01/01/06

3          01/01/06

4          01/01/06

5          01/01/06

 

 

The following month, after running it again, the table would
look like:

ID        DATE

1          01/01/06

1          02/01/06

2          01/01/06

2          02/01/06

3          01/01/06

3          02/01/06

4          01/01/06

4          02/01/06

5          01/01/06

5          02/01/06



 I have no idea how to “loopâ€? through this record set for
each record in Table1 and in turn insert into Table2.

View 2 Replies View Related

Need Help With A Stored Proc

Mar 30, 2006

I have a current stored proc that creates records based on
certain criteria.  One of the fields I
have is a SmallDateTime field.  To
populate this from my stored proc, I have this code (for this one field).

 SELECT @myLeaveDate = CAST(STR(MONTH(getdate()))+'/'+STR(01)+'/'+STR(YEAR(getdate())) AS DateTime) 

This always creates a record for the 1st of the
current month.  This works fine as is.  After it runs I can look at the table and it
creates dates that look like the following: “2/1/2006� -Notice it doesn’t have
any minutes, seconds, etc.

 

Now what I need is to do something similar in another field
which is also SmallDateTime, BUT I want the date to be for the 10th day
of the following month.


I got this working using dateadd, but it also appends the minutes, seconds,
etc.

View 1 Replies View Related

Stored Proc

May 9, 2001

Can I call a sp from within a sp ?
Is this a fairly normal practice ?

Thanks,
Ivan

View 2 Replies View Related

NEED HELP ON STORED PROC

Sep 15, 1999

Can someone help us with this stored proc.
We need the maxccid -1 to be passed as a value.

Here is the proc.

CREATE PROCEDURE NewBillingInfo
@int_acct_id char (10)
@cc_nickname varchar (20),
@cc_zip varchar (20),
@cc_name varchar (100),
@cc_num varchar (20),
@cc_typ varchar (20),
@cc_month char (2),
@cc_year char (4)
as
set nocount off
declare @maxaddrid int
declare @maxccid smallint
/* BEGIN ENCRYPT DATA*/
exec encrypt @cc_zip output, @cc_zip
exec encrypt @cc_name OUTPUT, @cc_name
exec encrypt @cc_num OUTPUT , @cc_num
exec encrypt @cc_typ OUTPUT, @cc_type
exec encrypt @cc_month OUTPUT, @cc_month
exec encrypt @cc_year OUTPUT, @cc_year
BEGIN TRAN
/* get max credit card id for customer and add 1 */
SELECT @maxccid = Max(int_cc_id) from CusCredit where int_acct_id = @int_acct_id
if @maxcced is null
SELECT @maxccid = -1
SELECT @maxccid = @maxccid + 1
INSERT INTO CusCredit
(int_acct_id, int_cc_id, cc_name, cc_num,
cc_typ, cc_month, cc_year, cc_zip, cc_nickname)
VALUES
(@int_acct_id, @maxccid, @cc_name, @cc_num,
@cc_type, @cc_month, @cc_year, @cc_zip, @cc_nickname)
if @@ROWCOUNT < 1
BEGIN
ROLLBACK TRAN
RETURN 103
end
COMMIT TRAN
RETURN
GO

If someone could take a minute and look at this I would be so grateful.

Thanks Dianne Watson

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved