Can't Access Reporting Services In Management Studio Or Web Interface Using Windows Integrated Security
May 12, 2008
I know from searching this forum that there have been many variations of the issue I'm currently suffering, but I haven't found anything quite like mine or a solution to solve it. The issue I'm running into is that I am unable to log on to Reporting Services using Management Studio or the web interface when Windows Integrated Security is enabled. I have full functionality using basic security, but the risks involved make it impossible to deploy basic authentication out into production. The error I'm receiving in Management Studio is The request failed with HTTP status 401: Unauthorized. (Microsoft.SqlServer.Management.UI.RSClient). I recieve the same error when I try the web interface.
I've looked the most recent logfile in WindowsSystem32LogFilesW3SVC1 and these entries match up to the time I attempted my authentication.
Code Snippet
2008-05-12 20:30:42 <Edited: Server IP> GET /reports - 80 - <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254
2008-05-12 20:30:42 <Edited: Server IP> GET /reports - 80 DomainUserName <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 301 0 0
2008-05-12 20:30:42 <Edited: Server IP> GET /reports/ - 80 - <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254
2008-05-12 20:30:46 <Edited: Server IP> GET /reports/home.aspx - 80 DomainUserName <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 302 0 0
2008-05-12 20:30:46 <Edited: Server IP> GET /reports/Pages/Folder.aspx - 80 - <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254
2008-05-12 20:30:47 127.0.0.1 POST /ReportServer/ReportService2005.asmx - 80 - 127.0.0.1 - 401 2 2148074254
2008-05-12 20:30:47 127.0.0.1 POST /ReportServer/ReportService2005.asmx - 80 - 127.0.0.1 - 401 1 0
2008-05-12 20:30:47 127.0.0.1 POST /ReportServer/ReportService2005.asmx - 80 - 127.0.0.1 - 401 1 2148074248
2008-05-12 20:30:49 127.0.0.1 POST /ReportServer/ReportService2005.asmx - 80 - 127.0.0.1 - 401 2 2148074254
2008-05-12 20:30:49 127.0.0.1 POST /ReportServer/ReportService2005.asmx - 80 - 127.0.0.1 - 401 1 0
2008-05-12 20:30:49 127.0.0.1 POST /ReportServer/ReportService2005.asmx - 80 - 127.0.0.1 - 401 1 2148074248
2008-05-12 20:30:50 <Edited: Server IP> GET /reports/Pages/Folder.aspx - 80 DomainUserName <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 500 0 0
2008-05-12 20:30:50 <Edited: Server IP> GET /Reports/js/ReportingServices.js - 80 - <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254
2008-05-12 20:30:50 <Edited: Server IP> GET /Reports/js/ReportingServices.js - 80 DomainUserName <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 200 0 0
2008-05-12 20:30:54 <Edited: Server IP> GET /Reports/styles/ReportingServices.css - 80 - <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254
2008-05-12 20:30:54 <Edited: Server IP> GET /Reports/images/blank.gif - 80 - <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254
2008-05-12 20:30:54 <Edited: Server IP> GET /Reports/images/blank.gif - 80 DomainUserName <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 200 0 0
2008-05-12 20:30:54 <Edited: Server IP> GET /Reports/images/48error.jpg - 80 - <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254
2008-05-12 20:30:54 <Edited: Server IP> GET /Reports/styles/ReportingServices.css - 80 DomainUserName <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 200 0 0
2008-05-12 20:30:54 <Edited: Server IP> GET /Reports/images/48error.jpg - 80 DomainUserName <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 200 0 0
2008-05-12 20:31:07 127.0.0.1 GET /reports/ - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254
2008-05-12 20:31:07 127.0.0.1 GET /reports/ - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 1 0
2008-05-12 20:31:13 127.0.0.1 GET /reports/ - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254
2008-05-12 20:31:13 127.0.0.1 GET /reports/ - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 1 0
I tried to highlight one of each of the HTTP errors I am getting. 401.2 and 401.1 are the ones I kind of expected, but have no idea why I'm getting them. The 500 0 error is a bit troubling, because unless I'm mistaken thats a server side error.
Here's my current setup. As far as I can tell, I've done everything to set up correctly for Windows Integerated security.
My Specs
The server machine running all SQL 2005 services. It resides in a domain. All Clients are in the same domain.
Intel Dual Processor 3.20 gig Xenon
Windows Server 2003 w/ SP2
Microsoft Sql Server 2005 w/ SP2
Reporting Services Setup
The virtual directories Reports and ReportServer are set to Windows Integrated Security with Anonymous Access disabled. All other checkboxes in Directory Security are unchecked. For permissions in Reports, I have:
Administrators (servernameAdministrators) - Full Control
ASP.NET Machine Account - Modify, Read & Execute, List Folder Contents, Read, Write
Authenticated Users - Modify, Read & Execute, List Folder Contents, Read, Write
Creator Owner - No permissions
Domain Users - Read & Execute, List Folder Contents, Read
SQLServer2005ReportingServices]WebServiceUsers$... - Read & Execute, List Folder Contents, Read
SQLServer2005ReportServerUsers$... - Read & Execute, List Folder Contents, Read
SYSTEM - Full Control
Users (CompNameUsers) - Read & Execute, List Folder Contents, Read
In ReportServer I have the same permissions except Authenticated Users is absent.
At one point, I even added the account Everybody and gave it full control, and I still recieved a HTTP 401 error. Any help at what I might be missing would be a godsend.
Thanks.
View 1 Replies
ADVERTISEMENT
Feb 22, 2011
I am trying to fetch the sharepoint list data into the SSRS report.
I have given credentials in shared datasource to access remote datasource.
In preview i m getting the following error:
Data extension supports windows integrated security and no credentials only.
View 3 Replies
View Related
Aug 12, 2015
I have an acctest server (XX-ATS-ASSHP102) running SSRS, SQL DB Engine & SSAS. I'm trying to configure NATIVE SQL Reporting Services to use a data source with Windows Integrated mode towards a SSAS cube on the same server. When I use the servername (or 127.0.0.1) it works perfectly. But when I use the DNS name bidb.acctest.internal it fails with the error "The connection either timed out or was lost.". The profiler on SSAS says "anonymous login" so the Kerberos login is broken at some point.The weird thing is that this works perfectly in production environment, but I've missed something in the ACCTEST environment.The SPN for the serviceaccount running SSAS has correctect SPN:s:
MSOLAPSvc.3/bidb.acctest.internal
MSOLAPSvc.3/bidb.acctest.internal:MSSQLSERVER
MSOLAPSvc.3/XX-ATS-ASSHP102
MSOLAPSvc.3/XX-ATS-ASSHP102.XX.XXXXXXXXXXX.net
MSOLAPSvc.3/XX-ATS-ASSHP102.XX.XXXXXXXXXXX.net:MSSQLSERVER
MSOLAPSvc.3/XX-ATS-ASSHP102:MSSQLSERVER
The SSRS account has delegation with "any service". No account has the "sensitive" flag.DNS names are A-records, except the hostname for the SSRS site which is a c-name, but it's identical in production.The "impersonate client after login" and "replace token" permissions are correct in the policy.The rsreportserver.config says:
   <Authentication>
      <AuthenticationTypes>
         <RSWindowsNTLM/>
      </AuthenticationTypes>
      <RSWindowsExtendedProtectionLevel>Off</RSWindowsExtendedProtectionLevel>
      <RSWindowsExtendedProtectionScenario>Proxy</RSWindowsExtendedProtectionScenario>
      <EnableAuthPersistence>true</EnableAuthPersistence>
   </Authentication>
both in production and in acctest env..
View 2 Replies
View Related
Apr 21, 2015
I have a client who would like to access his database via SQL Server Management Studio. I created a login for him. This login has access only to his database on the server (I set this up using the user mapping), the Securables has Connect to SQL checked (otherwise he won't see his database). When I test this login, he is able to see all the other databases on the server, though when he clicks on the ones he doesn't have access to, it will tell him that he can't access that database. He can access his database alright. My question is, can I hide all the other databases from him, and only display that only database he has access to? I have tried many different ways, I can't seem to be able to do so.
View 6 Replies
View Related
Jun 21, 2007
Hello everyone.
I have a question about granting enough rights to allow a non admin user to start and stop a sql server service via the SQL Server Management Studio by right clicking on the server node.
I have changed the acl's of the SQL Server service security and gave the user rights to start and stop the service. This does allow them to connect remotly to the server using computer manager and they successifully start and stop the service. But, in SQL Server Management Studio the option still does not show up, unless he is a admin of the server.
Does anyone know what other security settings I need to address for the start and stop to show up when I right click on the server node?
Thanks for any help
View 3 Replies
View Related
Apr 7, 1999
Hi All,
Can we implement a table level (object) security on the groups of the windows NT domain using the integrated windows NT security so that one group has
the permission over one table to update ,select ,delete the information and other group has permission has for some other table.
Thanks
Ajay
View 3 Replies
View Related
Jun 20, 2007
Hi,
I'm trying to connect Management Studio to Reporting services on my local machine, but get this message:
Code Snippet
Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
--
<html>
<head>
<title>Compilation Error</title>
<style>
body {font-family:"Verdana";font-weight:normal;font-size: .7em;color:black;}
p {font-family:"Verdana";font-weight:normal;color:black;margin-top: -5px}
b {font-family:"Verdana";font-weight:bold;color:black;margin-top: -5px}
H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red }
H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon }
pre {font-family:"Lucida Console";font-size: .9em}
.marker {font-weight: bold; color: black;text-decoration: none;}
.version {color: gray;}
.error {margin-bottom: 10px;}
.expandable { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; }
</style>
</head>
<body bgcolor="white">
<span><H1>Server Error in '/ReportServer' Application.<hr width=100% size=1 color=silver></H1>
<h2> <i>Compilation Error</i> </h2></span>
<font face="Arial, Helvetica, Geneva, SunSans-Regular, sans-serif ">
<b> Description: </b>An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
<br><br>
<b> Compiler Error Message: </b>CS0246: The type or namespace name 'Site' could not be found (are you missing a using directive or an assembly reference?)<br><br>
<b>Source Error:</b><br><br>
<table width=100% bgcolor="#ffffcc">
<tr><td>
</td></tr>
<tr>
<td>
<code><pre>
[No relevant source lines]</pre></code>
</td>
</tr>
</table>
<br>
<b>Source File:</b> c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportserver55a9c3a52dd8b450App_Code.7gago72k.0.cs
<b>Line:</b> 19
<br><br>
<br><div class="expandable" onclick="OnToggleTOCLevel1('compilerOutputDiv')">Show Detailed Compiler Output:</div>
<div id="compilerOutputDiv" style="display: none;">
<br><table width=100% bgcolor="#ffffcc">
<tr>
<td>
<code><pre>
C:WINDOWSsystem32> "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727csc.exe" /t:library /utf8output /R:"C:WINDOWSassemblyGAC_32System.Web2.0.0.0__b03f5f7f11d50a3aSystem.Web.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem2.0.0.0__b77a5c561934e089System.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportserver55a9c3a52dd8b450assemblydl378d258ab 0f57899_d34cc701ReportingServicesWebServer.DLL" /out:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportserver55a9c3a52dd8b450App_Code.7gago72k.dll" /debug- /optimize+ /w:4 /nowarn:1659;1699 "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportserver55a9c3a52dd8b450App_Code.7gago72k.0.cs" "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportserver55a9c3a52dd8b450App_Code.7gago72k.1.cs"
Microsoft (R) Visual C# 2005 Compiler version 8.00.50727.1318
for Microsoft (R) Windows (R) 2005 Framework version 2.0.50727
Copyright (C) Microsoft Corporation 2001-2005. All rights reserved.
c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportserver55a9c3a52dd8b450App_Code.7gago72k.0.cs(19,20): error CS0246: The type or namespace name 'Site' could not be found (are you missing a using directive or an assembly reference?)
</pre></code>
</td>
</tr>
</table>
</div>
<script type="text/javascript">
function OnToggleTOCLevel1(level2ID)
{
var elemLevel2 = document.getElementById(level2ID);
if (elemLevel2.style.display == 'none')
{
elemLevel2.style.display = '';
}
else {
elemLevel2.style.display = 'none';
}
}
</script>
<br><br>
<hr width=100% size=1 color=silver>
<b>Version Information:</b> Microsoft .NET Framework Version:2.0.50727.1318; ASP.NET Version:2.0.50727.1318
</font>
</body>
</html>
<!--
[HttpCompileException]: c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportserver55a9c3a52dd8b450App_Code.7gago72k.0.cs(19): error CS0246: The type or namespace name 'Site' could not be found (are you missing a using directive or an assembly reference?)
at System.Web.Compilation.AssemblyBuilder.Compile()
at System.Web.Compilation.BuildProvidersCompiler.PerformBuild()
at System.Web.Compilation.CodeDirectoryCompiler.GetCodeDirectoryAssembly(VirtualPath virtualDir, CodeDirectoryType dirType, String assemblyName, StringSet excludedSubdirectories, Boolean isDirectoryAllowed)
at System.Web.Compilation.BuildManager.CompileCodeDirectory(VirtualPath virtualDir, CodeDirectoryType dirType, String assemblyName, StringSet excludedSubdirectories)
at System.Web.Compilation.BuildManager.CompileCodeDirectories()
at System.Web.Compilation.BuildManager.EnsureTopLevelFilesCompiled()
at System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters)
[HttpException]: c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportserver55a9c3a52dd8b450App_Code.7gago72k.0.cs(19): error CS0246: The type or namespace name 'Site' could not be found (are you missing a using directive or an assembly reference?)
at System.Web.HttpRuntime.FirstRequestInit(HttpContext context)
at System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context)
at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)
-->
--. (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
Program Location:
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.SqlServer.Management.UI.RSClient.RSClientConnection.CreateConnection(String connectionString)
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.CreateConnectionObject()
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.RSTypeImpl.GetConnectionObject(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.RSType.GetConnectionObject(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
Anyone got any ideas?
Thanks,
Martin.
View 1 Replies
View Related
Apr 29, 2005
In my architecture I have a Domain Controller with Active Directory (DOMAIN_A), IIS 6.0 (WEBSERVER) and SqlServer 2000
(SQLDBSERVER).
The WEBSERVER has a
.NET application with windows authentication. The .NET application interacts with the
database server. I want to use Integrated Security to pass in
the users login credentials to the database to run any database calls so that I can
audit who is making what calls on the database.
The connection string
I am using for this is as follows:
string connStr =
"Server=SQLDBSERVER;Database=xxx;integrated
security=SSPI";
The problem arises
after I login to the web application (I use the user DOMAIN_ASomeUser where
SomeUser is a user who has permissions set up to make all of the database
calls). After logging in however, when I go to a page that makes a database
call I get the following error:
System.Data.SqlClient.SqlException: Login failed for user
'DOMAIN_AWEBSERVER$'.
It seems that for some
reason, .NET is not passing the login name SomeUser, but instead is passing
SERVERNAME$. Would anyone pls have any ideas how I can implement this. Any guide or references would be much appreciated.
Thanks in advance.
View 2 Replies
View Related
Dec 17, 2006
Hi,
I am having a problem in applying subscription to a report.
Here is my case:
I have a datasource with 'Windows integrated security ' authentication, yes....I am using windows domain authentication, so login info is not stored in DB but its authenticated from domain. Now the report I want to use subscription on is using this DS. I read it somwehere that I can use rsconfig -e -u -p option to assign user to unattended reports.
I think, this is the unattended report. I tried with rsconfig and then clicked on 'new subscription option'...and i got error (again) saying 'Subscription can not be created because the credentials used to run the report are not stored...or if linked report.....blah blah...'
I want to use subscription to this report but with 'Windows integrated security', is there any way I can do it ?? How can I assign some user to this report without changing authentiation method and use subscription ?
Help me ...I am stuck, this is the last milestone in my project !!!
Thanks,
Prashant
View 8 Replies
View Related
Mar 1, 2007
I have a set of reports that read from an Analysis Services cube. Permissions are managed at the cube level since different users should look at the same report but different data. This is why for those reports, the data source has Windows Integrated Security set.
Those same users should be able to subscribe to those reports, the problem is that for subscriptions to work, the data sources must store the credentials. This means the filtered reports are lost since the stored account will show all the reports for all users.
Is there any way of generating "filtered subscriptions"?
Thanks in advance
View 3 Replies
View Related
Jul 13, 2007
Hi.
I have some strange error trying to connect to Reporting Services.
At the beginning I was suspecting some accounts issues.
But after checking all the accounts under wich ASP.NET, SQL SERVER, Reporting Services are running I don't even know what to think.
After searching internet for answers the only similar problems' solutions were remove RS and install it again.
Have anybody here had this problem? Can you just fix something without reinstalling RS? The error is:
Object reference not set to an instance of an object
------------------------------
Program Location:
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.SqlServer.Management.UI.RSClient.RSClientConnection.CreateConnection(String connectionString)
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.CreateConnectionObject()
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.RSTypeImpl.GetConnectionObject(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.RSType.GetConnectionObject(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectorThread()
View 2 Replies
View Related
Dec 27, 2007
I have installed 2005 in a new machine with reporting services and configured the reporting services fine. I see the virtual directories fine in IIS but when I try connecting to the report server using IE (http://localhost/reports or http://servername/reports) i get page cannot be displayed errro. When I try connecting using management studio I get the following error
TITLE: Connect to Server
------------------------------
Cannot connect to BLRPTSQL03T.
------------------------------
ADDITIONAL INFORMATION:
The underlying connection was closed: An unexpected error occurred on a receive. (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. (System)
------------------------------
An existing connection was forcibly closed by the remote host (System)
------------------------------
BUTTONS:
OK
------------------------------
I donot see any errors in the event logs or the report server logs. Any help with this issue greatly appreciated
View 3 Replies
View Related
Aug 3, 2007
Hi,
I'm getting the following error message when I want to connect to reporting services through SQL Server Management Studio. I have also check the reporting services configurations manager for any issues but still can't connect. The http://localhost/reportserver also is down. I also checked if ASPNET account belongs to the Reporting Services security settings and it does. IIS is up and running.
I'm running SQL 2005 Enterprise 64bit with Service Pack 2.
===================================
Cannot connect to ctbbcysql02.
===================================
The request failed with HTTP status 503: Service Unavailable. (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
Program Location:
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.SqlServer.Management.UI.RSClient.RSClientConnection.CreateConnection(String connectionString)
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.CreateConnectionObject()
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.RSTypeImpl.GetConnectionObject(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.RSType.GetConnectionObject(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
Any help will be greatly appreciated.
Regards,
Ruaan
View 1 Replies
View Related
May 30, 2007
Greetings Folks,
We have a SQL Server Reporting Services instance running SP2. I have attempted to add a domain group in a trusted domain to the server to enable regular users to access reports. I have added this group to the instance folder as a SYSTEM USER and home as BROWSER. I am allowing those settings to be inherited down through the folders (reports and data sources) to the reports. My test user in this report receives:
The permissions granted to user 'DOMAINuser' are insufficient for performing this operation.
(log shows HTTP 500)
when the user attempts to use the URL to go directly to the report. If we try to navigate from HOME and walk the folders the user sees a blank HOME page.
I have used other groups with no problem.
Is there something I am missing in setting up the security environment? Any help would be greatly appreciated.
Thanks, Mark
View 1 Replies
View Related
Oct 23, 2007
I am trying to connect as follows:
Server: Windows 2003, SQL 2005, on a domain
Client: Windows 2008 Beta, not on any domain
I created an account with the same user name as the domain user on the client machine. And then I logged in as that user and went to Manage Network Password. I entered the correct domain credentials. Verified that this worked for file shares. However, SQL does not appear to be recognizing this and it tells me:
Login failed for user ''. The user is not associated with a trusted SQL Server connection.
I have verified that this domain account is working properly with SQL when the client is also on the domain.
How can I get this Windows authentication scenario to work where the client is not on the domain and the SQL server is on the domain?
View 5 Replies
View Related
Sep 15, 2006
When I try to connect to the Reporting Services using Microsoft SQL Server Management Studio, the following error message propmpts up:
_____________________________________________________________
ADDITIONAL INFORMATION:
The request failed with HTTP status 401: Unauthorized. (Microsoft.SqlServer.Management.UI.RSClient)
_____________________________________________________________
Is there any settings that I need to do in the "Reporting Services Configuration Manager" ?
Thanks.
Best regards,
Michael Wu
View 1 Replies
View Related
Jan 23, 2008
Please can you help me...
I am unable to open reporting services on my SQL 2005 server.
How can I open it??
It falls over with the following:
TITLE: Connect to Server
------------------------------
Cannot connect to L00000001DEV1.
------------------------------
ADDITIONAL INFORMATION:
Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
--
<html>
<head>
<title>Compilation Error</title>
<style>
body {font-family:"Verdana";font-weight:normal;font-size: .7em;color:black;}
p {font-family:"Verdana";font-weight:normal;color:black;margin-top: -5px}
b {font-family:"Verdana";font-weight:bold;color:black;margin-top: -5px}
H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red }
H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon }
pre {font-family:"Lucida Console";font-size: .9em}
.marker {font-weight: bold; color: black;text-decoration: none;}
.version {color: gray;}
.error {margin-bottom: 10px;}
.expandable { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; }
</style>
</head>
<body bgcolor="white">
<span><H1>Server Error in '/ReportServer$ILDEV1' Application.<hr width=100% size=1 color=silver></H1>
<h2> <i>Compilation Error</i> </h2></span>
<font face="Arial, Helvetica, Geneva, SunSans-Regular, sans-serif ">
<b> Description: </b>An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
<br><br>
<b> Compiler Error Message: </b>CS0016: Could not write to output file 'c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportserver$ildev1575b41e7ef9faab0App_global.asax.eki-3joz.dll' -- 'Access is denied. '<br><br>
<b>Source Error:</b><br><br>
<table width=100% bgcolor="#ffffcc">
<tr><td>
</td></tr>
<tr>
<td>
<code><pre>
[No relevant source lines]</pre></code>
</td>
</tr>
</table>
<br>
<b>Source File:</b>
<b>Line:</b> 0
<br><br>
<br><div class="expandable" onclick="OnToggleTOCLevel1('compilerOutputDiv')">Show Detailed Compiler Output:</div>
<div id="compilerOutputDiv" style="display: none;">
<br><table width=100% bgcolor="#ffffcc">
<tr>
<td>
<code><pre>
c:windowssystem32inetsrv> "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727csc.exe" /t:library /utf8output /R:"C:WINDOWSassemblyGAC_32System.Web2.0.0.0__b03f5f7f11d50a3aSystem.Web.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem2.0.0.0__b77a5c561934e089System.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportserver$ildev1575b41e7ef9faab0assemblydl3e595e3cb 025f0d5_c24cc701ReportingServicesWebServer.DLL" /out:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportserver$ildev1575b41e7ef9faab0App_global.asax.eki-3joz.dll" /debug- /optimize+ /w:4 /nowarn:1659;1699 "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportserver$ildev1575b41e7ef9faab0App_global.asax.eki-3joz.0.cs" "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportserver$ildev1575b41e7ef9faab0App_global.asax.eki-3joz.1.cs"
Microsoft (R) Visual C# 2005 Compiler version 8.00.50727.42
for Microsoft (R) Windows (R) 2005 Framework version 2.0.50727
Copyright (C) Microsoft Corporation 2001-2005. All rights reserved.
error CS0016: Could not write to output file 'c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportserver$ildev1575b41e7ef9faab0App_global.asax.eki-3joz.dll' -- 'Access is denied. '
</pre></code>
</td>
</tr>
</table>
</div>
<script type="text/javascript">
function OnToggleTOCLevel1(level2ID)
{
var elemLevel2 = document.getElementById(level2ID);
if (elemLevel2.style.display == 'none')
{
elemLevel2.style.display = '';
}
else {
elemLevel2.style.display = 'none';
}
}
</script>
<br><br>
<hr width=100% size=1 color=silver>
<b>Version Information:</b> Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
</font>
</body>
</html>
<!--
[HttpCompileException]: (0): error CS0016: Could not write to output file 'c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportserver$ildev1575b41e7ef9faab0App_global.asax.eki-3joz.dll' -- 'Access is denied. '
at System.Web.Compilation.AssemblyBuilder.Compile()
at System.Web.Compilation.BuildProvidersCompiler.PerformBuild()
at System.Web.Compilation.ApplicationBuildProvider.GetGlobalAsaxBuildResult(Boolean isPrecompiledApp)
at System.Web.Compilation.BuildManager.CompileGlobalAsax()
at System.Web.Compilation.BuildManager.EnsureTopLevelFilesCompiled()
at System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters)
[HttpException]: (0): error CS0016: Could not write to output file 'c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportserver$ildev1575b41e7ef9faab0App_global.asax.eki-3joz.dll' -- 'Access is denied. '
at System.Web.HttpRuntime.FirstRequestInit(HttpContext context)
at System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context)
at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)
-->
--. (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
BUTTONS:
OK
------------------------------
View 6 Replies
View Related
May 30, 2007
I can run the following query in Management Studio, but get the error listed below when I run it from the data tab in Reporting Services:
declare @starttime as datetime
declare @endtime as datetime
declare @timezone as integer
declare @date as datetime
set @timezone = 1
set @date = '5/1/2007'
set @starttime = dateadd(hh, @timezone, @date)
set @endtime = dateadd(d, 1, @starttime)
select @Starttime, @endtime from site
Error Message:
TITLE: Microsoft Report Designer
------------------------------
An error occurred while executing the query.
The variable name '@starttime' has already been declared. Variable names must be unique within a query batch or stored procedure.
------------------------------
ADDITIONAL INFORMATION:
The variable name '@starttime' has already been declared. Variable names must be unique within a query batch or stored procedure. (Microsoft SQL Server, Error: 134)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=08.00.2039&EvtSrc=MSSQLServer&EvtID=134&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
What I am trying to accomplish is the ability for users to select which time zone they want the data in the report to display in. To do this, I created a timezone parameter that has the offset from Central Time (which is how all data is stored in our database).
Any help would be greatly appreciated!
View 4 Replies
View Related
Jul 23, 2005
Hi , I am trying to connect to MS Sql server 2000 from Java (1.4.2 /1.5 ). I installed my Sql Server(8.00.382) from the one supplied withVS.NET 2001. When I installed it on my laptop it did not ask me for auser name and password. After install when I re-started my machine Isee the server started up with a green light. Now when I connect to theserver from VS.NET it works fine. This is because VS uses windowsintegrated security. I now need to connect using Java , so I downloadedthe microsoft drivers for SQL2000-JDBC sp3 from the microsoft site. Iadded the jar files to my Java project classpath. I manage to registerthe driver in java :Class dbClass = ClassLoader.getSystemClassLoader().loadClass("com.microsoft.jdbc.sqlserver.SQLServerDriver");DriverManager.registerDriver((Driver) dbClass.newInstance() );Connection conn =DriverManager.getConnection("jdbc:microsoft:sqlserver://localhost:1433;_integrated security=SSPI");but cannot seem to get a connection as it gives an SQLException sayingthat it is unable to connect:java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Errorestablishing socket.I cant seem to figure it out.Can some one help ??I am a newbie to sqlserver so couldnt quite figure out how to changeadmin password or create a new user with the tools provided with thisversion of sql (SQL Server Desktop Engine).Any help will be appreciated.Ebby
View 3 Replies
View Related
Aug 1, 2006
Hello Everyone,
I am trying to connect SQL database through code but I get this error,I have spent days to solve it but unfortunately I couldn't...Here is my code in VB express(OP:windows 2000 with SP4)I am new to VB,so it makes the situation more difficult for me.
my code is:
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim conn1 As SqlConnection = _
New SqlConnection("Data Source=.SQLEXPRESS;" & _
"Integrated Security=SSPI;" & _
"database=deneme3_database;")
'Open connection
conn1.Open()
MessageBox.Show("Connection succeeded.")
'Close connection
conn1.Close()
MessageBox.Show("Connection closed.")
End Sub
The error message is,it is in german but it is clear I guess:)
" Die von der Anmeldung angeforderte "deneme3_database"-Datenbank kann nicht geöffnet werden. Fehler bei der Anmeldung.
Fehler bei der Anmeldung für den Benutzer 'ADPLANatalay'. "
Thank you in advance!
Can
View 6 Replies
View Related
Mar 17, 2007
I am trying to connect to an SQL database with a Java program compiled in NetBeans IDE. I have copied the proper .dll in the auth folder to the same folder as the .jar file required. I have tried a lot of things for a lot of hours, and am still coming up with the message "Driver is not configured for integrated security and "could not load the xxxxx.dll
Has anyone come up with a solution or a workaround to this problem. Please help. I have read the documentation until I am blue in the face. Please only respond if you have a 64 bit machine.
Thanks, Frank
View 1 Replies
View Related
Oct 5, 2007
I have installed multiple instances of SSRS on same server with different database. I can go to the report server URL for both SSRS and run reports. But I cannot connect to the 2nd instance through "SQL Server Management Studio". Also
I am getting following error when I try to connect to the "Reporting services configuration" tool from a remote machine
Code Block
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Management.ManagementException: Not found
at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.PropertyData.RefreshPropertyInfo()
at System.Management.PropertyDataCollection.get_Item(String propertyName)
at System.Management.ManagementBaseObject.GetPropertyValue(String propertyName)
at System.Management.ManagementBaseObject.get_Item(String propertyName)
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.get_IsSharePointIntegrated()
at ReportServicesConfigUI.ConfigurationManager.ResetStepStatus()
at ReportServicesConfigUI.ConfigurationManager.ChangeMachine()
at ReportServicesConfigUI.ConfigurationManager.LaunchDialog()
at ReportServicesConfigUI.ConfigurationManager.OnActivated(EventArgs e)
at System.Windows.Forms.Form.set_Active(Boolean value)
at System.Windows.Forms.Form.WmActivate(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINNT/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
RSConfigTool
Assembly Version: 9.0.242.0
Win32 Version: 9.00.3042.00
CodeBase: file:///C:/Program%20Files/Microsoft%20SQL%20Server/90/Tools/Binn/RSConfigTool.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINNT/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINNT/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINNT/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINNT/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Management
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINNT/assembly/GAC_MSIL/System.Management/2.0.0.0__b03f5f7f11d50a3a/System.Management.dll
----------------------------------------
System.ServiceProcess
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINNT/assembly/GAC_MSIL/System.ServiceProcess/2.0.0.0__b03f5f7f11d50a3a/System.ServiceProcess.dll
----------------------------------------
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
View 5 Replies
View Related
Mar 22, 2009
Is Format Painter is available in SQL Server Management Studio Report Design?If not, any other way can we copy format?
View 4 Replies
View Related
Jan 4, 2006
Hi, Happy New Year!
I have been struggling with this problem for a while with SQL 2005. I have never had such login problem with SQL 2000. Here is the scenario:
I have installed SQL2005 standard version on a XP Pro box and I am trying to access it from another XP Pro machine. I can access it using a SQL user name and password that I set up on the server, but I have not had luck with using Windows NT Integrated security. When I try to connect to it (e.g. by a UDL file), I get an error saying Login failed for user €˜HP-AMD64Guest€™ where €˜HP-AMD64€™ is the name of the PC running the SQL 2005. I can access the files on the machine without any problem. I do not understand why it uses €˜Guest€™ that is not what I use to log on my machine. Does anyone have any clue to offer me?
Thank you in advance!
h
View 14 Replies
View Related
Mar 29, 2007
I do a clean install of SQL Server + RS + SP1 with standard setup on Windows Server 2003. I create a simple report (select * from aTable). This report (actually any report) shows the error message "For security reasons DTD is prohibited in this XML document. To enable DTD processing set the ProhibitDtd property on XmlReaderSettings to false and pass the settings into XmlReader.Create method."
This has to do with security settings in Windows Server 2003. On Windows XP everything works fine.
Any help would be greatly appreciated. Thanks!
Edit: The reports do work in the preview tab in BIDS.
View 5 Replies
View Related
May 11, 2007
Hello,
I'm new to ASP, but developping in Sql for years.
What we would like to have is that the user is accessing the database over it's own Windows Logon. Our triggers log quite some changes and are using UserName() for this. I've treid to force the IIS to accept Windows Integration only, the SqlDataSource users a connection that has Integrated Security = True. But when connection to the site i'm gatting error that there is no trusted connection for the user . (dot) ...
I suppose i'm missing something but could you give me a hint where to start looking..... THX
View 3 Replies
View Related
Oct 19, 2007
If I am posting to the wrong forum, please point me in the right direction.
We have upgraded to SQL Server 2005 and Window 2003 from SQL Server 2000 and Windows 2000, and have been having all kinds of problems with security of our web applications. We have been forced to put the system account of the web server as a user in the database in order for the web applications to work. We have lost the ability to control security at the user/role level. Is this the way security is going to work in Windows 2003/SQL Server 2005? How do I use integrated security so that I can secure web pages and database objects?
Thanks
View 4 Replies
View Related
Feb 20, 2008
Hi €“
We have built a .NET on SQL Server application with extensive business functionality and security. It uses SQL integrated security to control logon and access to the database objects. There is business logic built into the .NET code, so I don€™t want any chance that users access the tables directly through a tool such as Management Studio - many users need update, delete, insert on tables in order to use the applications functions. With integrated security they can logon through SQL Management Studio and change data in the tables directly.
How are people who are using integrated security for their business applications preventing logons through unauthorized tools or applications?
Peter
View 1 Replies
View Related
Oct 24, 2015
I am asking a dummy question. I downloaded SQL Express 2014 and can't find the management studio from Windows 8.
View 2 Replies
View Related
May 8, 2008
Hello,
I am facing a very odd behavior with SQL server 2005.
I have a database role with specific permissions to execute only some of the stored procedures in the database. I also have a SQL login/user attached to the role.
If I execute one of the stored procedures from the application (web application, with Microsoft enterprise library database block) I am getting a security error stating that I need select permission for the schema.
However, If I execute the same sp with the same parameters from SQL management studio, connecting with the same SQL login as in the application I can execute the sp without any security errors. The SQL management studio is in on a different server than the targeted database.
Are there any differences between executing stored procedures from SQL MS and from application when using the same SQL login?
Thanks,
IT
View 6 Replies
View Related
Dec 11, 2007
Hello,
After searching the SQL reporting services forum for a while, I decided to lay this problem before you.
I am faced with the following problem:
I want to generate a report containing video data, this videodata is streamed into a SQL 2005 database.
The main question I have is whether it is at all possible to show moving images in an report? (for instance with a CRI?)
Or should I look in another direction (I initially thought of an external link to HTML file with an MediaPlayer Object and having the file stored on a harddisk for instance?)
Any help on this subject would be greatly appreciated!
kind regards,
Michiel
View 1 Replies
View Related
