This may seem like a simple question to be asking but I’m not the most experienced working with DTS loads and can't understand (don't know) why my load is failing.
I am trying to load in a text file comma separated into a table I have created.
As far as I can se it should be working but it gives me the error:
The number of failing rows exceeds the maximum specified.
TransformCopy 'DTSTransformation_4'conversion error: General conversion failure on column pair (source column 'Col004(DBTYPE_STR), destination column 'Result1' (DBTYPE_NUMERIC)).
Help.
Can't figure out what’s going on so any ideas would be useful.
I have a table on SQL with numeric field (18,3), when create a cursoradaptor the become the a numeric field accept only int Value not allow to accept decimal. How to enable the field to accept decimal.
I am attempting to concatenate two numeric type fields together with character data and the query is adding them together. I am assuming I need to convert the ints to a string type but would appreciate some info on the best way to do this...I am sure it's something simple but am not finding much on the web about it.
SELECT vehFacID + '-' + vehID AS vehNew FROM Vehicles
I have a table: batch_date numeric (8,0) batch_nmbr numeric (5,0) batch_ctr numeric (4,0) col4... col5... col6...
I am trying to select data using something like: select col1, col2 FROM tablename WHERE (BATCH_DATE + BATCH_NMBR + BATCH_CTR) >= (:BATCH-DATE + :BATCH-NMBR + :BATCH-CTR)
this is a mssql cursor embedded in a microfocus cobol program.
I've generated a report using Reporting Services, and some of my fields are numeric with the value zero. On generating the report this is shown as 0.00 and not 0. Is this something that is easily fixed?
If I create an index on a field in SQL Server, what will be the most efficient (fastest) field type to index a field? (This field will be a "Pointer" to a child table that will contain a list of codes, and their description.) Would a Numeric field be quicker than a VarChar field? VarChar would make it easier for a Human to decipher the raw records. (For example, if I used a numeric the code would be 42 or 47, while the VarChar could be 'savings' or 'checking'.) Basically I will have the following "Master" table: FieldType --------- IDInt NameVarChar StatusInt -or- VarChar Customer_TypeInt -or- VarChar If Customer_Type is a code that can be looked up in another table, and I index that field, would I want the "Code" to be an Int or VarChar? SQL: Select * From Master Where Customer_Type = <42> or <'savings'> My Where clause would depend on the field type. Thank you, Bryan
I have 2 varchar fields on MS 2005 table First field is date and format is 080118(YYMMDD) and second is salary field like 00002000(positive) and 00002000- (negative) how can I move them to date and numeric fields on another table....
I'm attempting to use the isnull function to convert null values in a column to a blank. It works on the alpha field but not the numeric and I was wondering what can be done for numeric field conversion.
I am totally new to SSIS and im in the learing phase. I have a requirement as below,
I have two flat files (mainframe files), the structure i have given below,
File1:
070113
12345johnk
23456james
1st row is header record which has got date in YYMMDD format and remaining rows have emp no and emp name
File2:
070113
070113
070113
070113
contains 4 records which are dates.
The requirement is to compare the header date in file1 with the 4 dates in file2, if they are equal then it should load all the records in file1 except the header into a table and if they donot match then it should log an err msg. Please could someone provide a lead on this.
The files have same record length and fixed field delimited.
when I run below query I got Error of Arithmetic overflow error converting numeric to data type numeric declare @a numeric(16,4)
set @a=99362600999900.0000
The 99362600999900 value before numeric is 14 and variable that i declared is of 16 length. Then why this error is coming ? When I set Length 18 then error removed.
I'm getting the above when trying to populate a variable. The values in question are : @N = 21 @SumXY = -1303765191530058.2251000000 @SumXSumY = -5338556963168643.7875000000
When I run, SELECT (@N * @SumXY) - (@SumXSumY * @SumXSumY) in QA I get the result OK which is -28500190448996439680147097583285.072256 ie 32 places to left of decimal and 6 to the right When I try the following ie to populate a variable with that value I get the error - SELECT R2Top = (@N * @SumXY) - (@SumXSumY * @SumXSumY)@R2Top is NUMERIC (38, 10)
I have the Excel Connection Manager and Source to read the contents from an Excel file. For some reason couple of numeric fields from the Excel worksheet are brought over as nulls even though they have a value of 300 and 150. I am not sure why this is happening. I looked into the format of the fields and they are set to General in Excel, I tried setting them to numeric and that did not help.
All the other content from the excel file is coming thru except for the 2 numeric fields.
I tried to bring the contents from the excel source to a text file in csv format and for some reason the 2 numeric fields came out as blank.
Any inputs on getting this addressed will be much appreciated.
Here I will describe my problem. 1. We are loading large amount of data from database on background thread which is starting on Application_start event in global.aspx.cs file.The data is later cached for subsquent request to improve the performance. 2. Now when we put the application on web farm garden, it is not able to load the application. 3. We are sending the request the servers through Router kind of application. 4 This application is working fine on single server enviornment.
I just have done the SSIS example in the tutorial document included when install SQL 2005 ENT. I have a problem that whenever I test to run, the service load all data from source with out noticing about the data (I mean it load all the data to the destination), I do it several time and it continue to load all without checking. That mean the data is dublicated when the schedule run???
I think there should be a paramete or something like that to help the engine just load the new data to the destination. Could you help please?
I have just started using SQL Server reporting services and am stuck with creating subreports.
I have a added a sub report to the main report. When I right click on the sub report, go to properties -> Parameters, and click on the dropdown for Parameter Value, I see all Sum and Count fields but not the data fields.
For example, In the dropdownlist for the Parameter value, I see Sum(Fields!TASK_ID.Value, "AppTest"), Count(Fields!TASK_NAME.Value, "CammpTest") but not Fields!TASK_NAME.Value, Fields!TASK_ID.Value which are the fields retrieved from the dataset assigned to the subreport.
When I manually change the parameter value to Fields!TASK_ID.Value, and try to preview the report, I get Error: Subreport could not be shown. I have no idea what the underlying issue is but am guessing that it's because the field - Fields!TASK_ID.Value is not in the dropdown but am trying to link the main report and sub report with this field.
Am I missing something here? Any help is appreciated.
How can I create a Table whose one field will be 'tableid INT IDENTITY(1,1)' and other fields will be the fields from the table "ashu". can this be possible in SQL Server without explicitly writing the"ashu" table's fields name.
Hello !I'm trying to update one table field with another table searched firstdate record.getting some problem.If anyone have experience similar thing or have any idea about it,please guide.Sample case is given below.Thanks in adv.T.S.Negi--Sample caseDROP TABLE TEST1DROP TABLE TEST2CREATE TABLE TEST1(CUST_CD VARCHAR(10),BOOKING_DATE DATETIME,BOOKPHONE_NO VARCHAR(10))CREATE TABLE TEST2(CUST_CD VARCHAR(10),ENTRY_DATE DATETIME,FIRSTPHONE_NO VARCHAR(10))DELETE FROM TEST1INSERT INTO TEST1 VALUES('C1',GETDATE()+5,'11111111')INSERT INTO TEST1 VALUES('C1',GETDATE()+10,'22222222')INSERT INTO TEST1 VALUES('C1',GETDATE()+15,'44444444')INSERT INTO TEST1 VALUES('C1',GETDATE()+16,'33333333')DELETE FROM TEST2INSERT INTO TEST2 VALUES('C1',GETDATE(),'')INSERT INTO TEST2 VALUES('C1',GETDATE()+2,'')INSERT INTO TEST2 VALUES('C1',GETDATE()+11,'')INSERT INTO TEST2 VALUES('C1',GETDATE()+12,'')--SELECT * FROM TEST1--SELECT * FROM TEST2/*Sample dataTEST1CUST_CD BOOKING_DATE BOOKPHONE_NOC12005-04-08 21:46:47.78011111111C12005-04-13 21:46:47.78022222222C12005-04-18 21:46:47.78044444444C12005-04-19 21:46:47.78033333333TEST2CUST_CD ENTRY_DATE FIRSTPHONE_NOC12005-04-03 21:46:47.800C12005-04-05 21:46:47.800C12005-04-14 21:46:47.800C12005-04-15 21:46:47.800DESIRED RESULTCUST_CD ENTRY_DATE FIRSTPHONE_NOC12005-04-03 21:46:47.80011111111C12005-04-05 21:46:47.80011111111C12005-04-14 21:46:47.80044444444C12005-04-15 21:46:47.80044444444*/
I am using MS SQL 2012. I have a table that contains all the data that I need, but I need to summarize the data and also add up decimal fields while at it. Then I need a total of those added decimal fields. My data is like this:
I have Providers, a unique ID that Providers will have multiples of, and then decimal fields. Here are my fields:
I would like to search a table for a phrase, or for a partial phrase,eg on table product - for name or description, or name + descprition.How does one say select * from product where name + description like%phrase%or contains phraseCurrently I can get where name, or where descriotion like %phrase%,eg, where name like krups, or where description like coffee makerBut if I search for where name like %krups coffee maker% i get noresults. krups is in the name field, coffee maker is in thedescription field.Thanks,-M
I have a big problem and i'm not able to find any hint on the Network.
I have a window2000 pc, VS2005,II5 and SQLServer 2005(dev edition)
I created an SSIS Package (query to DB and the result is loaded into an Excel file) that works fine.
I imported the dtsx file inside my "Stored Packages".
I would like to load and run the package programmatically on a Remote Scenario using the web services.
I created a solution with web service and web page that invoke the web service.
When my code execute: Microsoft.SqlServer.Dts.Runtime.Application.LoadFromDtsServer(packagePath, ".", Nothing)
I got the Error: Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
The error message doesn't help so much and there is nothing on the www to give me and advice....
Pardon me if this question is too elementary. I am trying to create a trigger that will cause certain datafields to be updated with values from other data fields in the same row when a certain column, created specifically to fire the trigger, is updated. The purpose of this is to reduce data entry by field personnel.I think I have the create trigger statement correct, but I'm a little confused on the update statement.
In a nutshell, how can I write something like: UPDATE "TABLENAME" SET DATAFIELD1 = DATAFIELD2 WHERE RECORDNUMBER = (THE SAME RECORD NUMBER)
I do know that I have to ensure that sp_dboption Recursive Triggers value is set to false, thanks.
I have a list of items in one table and a field (pageName) in another table that may contain one of the aforementioned items somewhere within that field. There is no fixed position within the field where the itemNo may be so I can't just use SUBSTRING(pageName,2,5) in(select itemNo from tblItem).
Logically, it's like I need to combine IN and LIKE: select pageName where pageName LIKE IN %select itemNo from tblitemNo%..LIKE can only handle one comparison string.
Hi people My users are having troubles with link to default drillthrough report when reports are exported to excel (they REALLY don't like this behavior ), so I decided set all of them disabled in report model, this work fine, but calculated field in reports has this drillthrough link.
Let me show you the situation. Entity Product has an UnitaryCost field, I set the EnableDrillthrough Property in False so when I export a report with this field, no link is shown.
But if I create in the report a calculated field Round(UnitaryCost) this field has a Drillthrough Link
Is this the standard and expected behavior? or its simply a BUG?
Have I done something wrong in my model? and in this case, How I can correct this?
I have an assembly, call it A1, that I've deployed to a SQL Server 2005 database. I can use the managed stored procedures from A1 in SQL Server no problem.
In A1 there is a bit of code which uses the Assembly.Load() method, so load another assembly and use instances of class found in that external assembly. However, when I run the managed stored proc in A1 that uses Assembly.Load() I get the error:
Could not load file or assembly 'A1, Version=1.0.0.0, Culture=neutral,PublicKeyToken='????' or one of its dependencies. The system cannot find the file specified.
(note: for security I've changed some of the above line).
I re-built the project, re-deployed it and ran the code in SQL Server - it worked. I could create an instance of a System.Data.DataSet for example. So why can't I load my own custom assembly? My assembly does have a strong name and it's installed in the GAC. I wrote a console app to try and Assembly.Load() my custom assembly and that worked fine (it was also running on the same server as the SQL Server).
So it's defiantely the SQL Server that can't 'see' my customer assembly. What do I need to do this assembly so that SQL Server will allow me to Assembly.Load it, just as it can with System.Data?
Hello,Im calling a stored proc that has a numeric value as a varible.In the asp im using the code:myPrivate.Parameters.Add("@memberID", SqlDbType.Decimal, 18).Value = Decimal.Parse(uxToText.Text);I'm using decimal as there is no numeric sqldb type, is this correct? Also is the decimal parse correct as Im getting a 'Input string was not in a correct format' error.Thanks
