Can't Select Data Mining Technique....
Nov 14, 2006
Colleagues:
I'm working through the DM tutorials and I can't select a data mining technique when creating a new mining structure in BI Studio - BI Studio locks up totally. Have installed SQL Svr 20005 SP1 and components from feature pack. Analysis Server service is running, have set the properties in the DM project properties to the running instance of Analysis Services. Have read the various posts on the forum and have double checked my configuration - all seems as it should be.
All suggestions appreciated - very much looking forward to working with the technology.
Michael (michael.dataSense@sympatico.ca)
View 3 Replies
ADVERTISEMENT
Apr 26, 2006
Hi, all here,
I am wondering where can I store my mining results in data mining engine? For example, I got mining results like accuracy chart, decision trees, and other formats of results based on different mining algorithms I used for my data mining, so where can I actually store the results for reporting service use later? Is it possible to do that in SQL Server 2005?
Thanks a lot for any help and guidance in advance.
View 4 Replies
View Related
Sep 29, 2015
I followed the tutorial posted at [URL] ...
Everything was ok until the last step where I had to process the mining structure which resulted in a warning
"Informational (Data mining): Decision Trees found no splits for model, Tbl Decision Tree Example."
What does this error mean? How do I resolve it? Also, I only see the first level in the Mining Model Viewer, I don't see the levels 2 and 3.
View 2 Replies
View Related
Feb 23, 2007
Hi, all experts here,
I would like to know if there is any way to migrate third-party data mining packages with SQL Server 2005 data mining algorithms together then we can have a comparison among all of them to get the best results for training models.
I am looking forward to hearing from you.
Thanks a lot.
With best regards,
Yours sincerely,
View 1 Replies
View Related
May 31, 2006
Hoping someone will have a solution for this error
Errors in the metadata manager. The data type of the '~CaseDetail ~MG-Fact Voic~6' measure must be the same as its source data type. This is because the aggregate function is not set to count or distinct count.
Is the problem due to the data type of the column used in the mining structure is Long, and the underlying field in the cube has a type of BigInt,or am I barking up the wrong tree?
View 16 Replies
View Related
Apr 30, 2015
I'm a beginner with SQL 2012 SSDT & SSMS. I get this error message when I try to deploy my project:Â
"Error 6
Error (Data mining): KEY SEQUENCE columns are not supported at the case level. The 'Customer Key' column of the 'TK448 Ch09 Cube Clustering' mining structure contains content that is not valid.
0 0
"
I am finding it hard to locate the content that is not valid. I've been trying to find a answer for this problem but can't seem to find anything. How can I locate the content that is not valid and change or delete it so that I can deploy this solution?
View 2 Replies
View Related
Jun 4, 2015
Having successfully created :
- a data mining structure with about 80 columns.
- a data mining model using Microsoft_Decision_Trees with 2 prediction columns.Â
I thought I would then explore the possibility of have more than 2 prediction columns, in this case 20.
I get an error message and I can't work out :
a) if this is because there's a limit to the maximum number of prediction columns and where that maximum is stated.
b) if something else has become corrupted
c) there's a know bug and if the error message is either meaningful or not.
Either way, I'm unable to complete the data mining wizardÂ
The error message is :Errors in the metadata manager. Either the mining structure with the ID of '[my model Structure]' does not exist in the database with the ID of 'DMAddinsDB', or the user does not have permissions to access the object.
View 3 Replies
View Related
Oct 25, 2007
Hi all,
I am using Microsoft_Time_Series and have set HISTORIC_MODEL_GAP to various values (from 1 to 21). I always get this error:
Error (Data mining): The 'HISTORIC_MODEL_GAP' data mining parameter is not valid for the 'My Time Series' model.
In Algorithm Parameters window, this parameters is not there by default, so I have to add it.
Any tip will be greatly appreciated.
View 3 Replies
View Related
Jun 15, 2015
Implementing data mining Add-in in an academic setting? We need to handle over 150 new students a semester and have their connection to Analysis Services survive for their four years at the college. We are introducing data mining to every freshman business student as a unit within their Intro to Excel class (close to a month of work to give them a sense of what is possible). Other courses later in their curriculum will expand on that introduction.Â
Once implemented, we would have as many as 900 connections to manage (four years from now). It is possible that multiple sections will be running at the same time, so 40 students may be accessing the data mining tools concurrently. Â
Is there a way to "bulk establish" the access credentials and establish those databases?
View 4 Replies
View Related
Aug 4, 2015
With SASS Database i have created Data mining Structure Using Time series algorithm, while processing the SSAS db, Data mining  taking long time to process, so how we can  reduce processing time ???
View 2 Replies
View Related
Sep 26, 2006
Hi,
I have just run a simple data set through a model to predict a simple true or false value (i.e. binary output)
The Lift Chart/Mining Legend in Analysis Services shows three results €“ Score, Population Correct (%), and Predict Probability (%)
Population Correct I beleive is the percentage of predictions it got right out of the total number of predictions it tried to make. Is this correct?
However, I can€™t work out how the other two are derived in particular the 'SCORE'. To give a live example the scores were as follows:
Model Score Pop Correct Pred Probability
Decision Trees 0.83 76.59% 54.28%
Neural Network 0.75 67.63% 50.05%
Ideal Model 100.00%
Can anyone help with this and give a detailed explanation?
Many thanks,
S Rajput
View 4 Replies
View Related
Apr 11, 2007
Hi,
I am trying to model data in analysis services with the Advance Create Mining Model function in the excel addin. I am having trouble creating an association model that works like the Associate button above the Advanced button.
The format of my data is like this
OrderID Product
100 Bike
100 Helmet
100 Shoes
200 Helmet
200 basketball
200 Bat
300 Shoes
300 Socks
The associate button works perfectly since it asks me which column is the transaction id (orderid) and which column I am trying to predict (product). The advanced create mining model asks me to determine what the columns are...
OrderID=key Product=Input+Predict?
When I run the advance create mining model associate, I get a browser that gives me no rules and the support for only one item itemset (each product but no combination of products).
Does anyone know what I have to do to get it to work like the associate button?
View 8 Replies
View Related
Jan 15, 2008
Been handed a system which inserts millions of records per day into a single table with a composite 'wide' index (they tell me it's the only way to achieve uniqueness) and they run large financial reports from this 300,000,000 row table and of course we are I/O is an understatment.
I wish to split the data feed (inserts) workload away from the reporting tables however I need method to transfer the feed data into the report tables and control the volume of traffic. first choice is replication but is this sufficiently robust enough for a commodeties system? If not any ideas?
View 2 Replies
View Related
Jul 18, 2006
I perform data mining on all products and a specific product category.
Do I need to create 2 data source views, one for all products and the other one for the specific product category?
Afterward, I run the Data Mining Wizard 2 times to create 2 mining structures.
I also need to add the same mining model (e.g. Bayes, Cluster) to each of these mining structures.
Is there any simple way to do it?
Thanks.
Joe.
View 3 Replies
View Related
Nov 24, 2006
Hi, all here,
Thank you very much for your kind attention.
I am wondering if it is possible to use SSIS to sample data set to training set and test set directly to my data mining models without saving them somewhere as occupying too much space? Really need guidance for that.
Thank you very much in advance for any help.
With best regards,
Yours sincerely,
View 5 Replies
View Related
May 3, 2015
I am trying to delete tables from data where the ModifiedDates older than 9 years in AdventureWorks2012 database . I get console notified that foreign keys are dropped but the delete statement is throwing errors. I am sure that somewhere the key constraints are not getting altered, but i'm not able to figure it out as i'm a relative beginner to T-SQL. The error and code:
The DELETE statement conflicted with the REFERENCE constraint "FK_SalesOrderHeaderSalesReason_SalesReason_SalesReasonID". The conflict
occurred in database "AdventureWorks2012", table "Sales.SalesOrderHeader
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.SMO") | Out-Null
$option_drop = new-object Microsoft.SqlServer.Management.Smo.ScriptingOptions;
$option_drop.ScriptDrops = $true;
[Code] ....
View 3 Replies
View Related
Jun 19, 2007
Hi, all experts here,
I am wondering is there any way to select only a portion of a data set to train the mining model? In this case, I mean we dont need to split the dataset in advance, what I want to do is being able to select any random portion of a selected dataset to train a mining model. Any advices?
I am looking forward to hearing from you and thanks a lot in advance for your advices and help.
With best regards,
Yours sincerely,
View 3 Replies
View Related
May 25, 2006
hi
I am new at MSSQL 2000 DBA thing. and trying to learn more about analysis service/data warehouse/data mining. so is any expert out there can Recommend some good books or web link article to read? Thanks
View 1 Replies
View Related
Jun 15, 2007
Could I ask how to spit the data into training and validation sets when doing data mining?
Thanks
View 1 Replies
View Related
Dec 20, 2006
I'm stucked in a problem and I thought if you would be so kind as to helping me to resolve it.
I'm implementing a clustering algorithm plugin for text mining. I've already read the tutorials and sample codes provided by the MSDN Library.
Well... My problem is: I can't go through the data when the Predict method is called. I've read that this method implements the "core" of the custom algorithms. Here is a small snippet of my code for you to understand my doubt:
STDMETHODIMP ALGORITHM::Predict(/* [in] */ IDMContextServices* in_pContext,/* [in] */ DM_PREDICTION_FLAGS in_Flags,/* [in] */ IDMAttributeGroup* in_pPredAttGroup,/* [in] */ DM_CaseID in_CaseID, /* [in] */ ULONG in_ulCaseValues,/* [in] */ DM_ATTRIBUTE_VALUE* in_rgValues,/* [in] */ ULONG in_ulMaxPredictions,/* [in] */ ULONG in_ulMaxStates, /* [out] */ DM_ATTRIBUTE_STAT** io_prgPredictions,/* [out] */ ULONG* out_pulPredictions) {
for(UINT i=0;i<in_ulCaseValues;i++) {
DM_ATTRIBUTE_VALUE& dmattributevalue = in_rgValues;
ULONG iAttribute = dmattributevalue.Attribute;
if (iAttribute == DM_UNSPECIFIED)
continue;
double dblValue = ::DblContinuous(dmattributevalue.Value);
char buffer[129];
sprintf(buffer,"%f ",dblValue);
RENAN_Log::log(buffer);
}
return S_OK;
}
As you can see, I'm going through in_rgValues to get its values, but i'm only obtaining the first register of the table on the database. I need to roll over a kind of resultset so I could access all the registers I need. Is there any way to do so ?
I expected Predict() received a matrix containing all my data, but the only thing I noticed that could represent the data is that in_rgValues vector. So I can go through this vector, but it holds only the first register of the table in the database (that's what's being saved on my log). I need all of the registers in order to pre-process the data and implement my clustering algorithm.
Well... That's it... I would be very pleased if you could help me.
View 7 Replies
View Related
Jun 15, 2015
I have very little experience with programming and data mining, but I am working on a project where I need to take data from one spreadsheet and place it in another. Since it is hard to describe what I would like to do, I will provide an example:
SPREADSHEET 1
Column 1, Column 2
100, ?
101, ?
102, ?
103, ?
SPREADSHEET 2
Column 1, Column 2
102, 202
100, 200
103, 203
101, 201
In this example, the data in Column 1 is always tied to the data in Column 2 (i.e., 100 in Column 1 means 200 in Column 2, etc.) However, the data for Column 2 is only available in SPREADSHEET 2; moreover, the data is not in the same order in both spreadsheets.
My question is how can I create some sort of program where I can transfer the data from SPREADSHEET 2 into SPREADSHEET 1?
View 2 Replies
View Related
Jul 24, 2007
Hi my friends,
I do have a problem with results of clustering algorithm with my categorical data.
In reality I have a big table with one's and zero's and I try to cluster according to 60 attributes.
I tries to cluster to two categories many times but I get only one cluster. What do you suggest. Which values can I change to the algorithm? Is there anything particular for categorical data ?
Thank for your help in advance.
Manolis
View 3 Replies
View Related
Aug 5, 2007
Thank you very much for your previous answers conserning clustering algorithm.
I change a bit my data and now I can get two and three clusters as I wish.
But now I have a different question. I wish to keep my Structure and Model for further trials with different algorithm values, like cardinality. I tried the following
I selected in excel Data Mining and then the option cluster button.
Then in the cluster wizard I chose analysis service data source and I reform the query as I need adding only at the end
where "STAFF_YES" = 1. Then I choose the needed columns and target value. Finally I select browse model, enable drill through only and I finish the wizard and get some results, rather good. But i need to try again with different parameters.
I tried Business intelligent Studio to check my Analysis service. The structure were here but when I changed any parameter and I tried to reprocess I got the following messages
Processing Mining Structure 'try Structure_1' completed successfully.
Start time: 5/8/2007 4:55:08 μμ; End time: 5/8/2007 4:55:08 μμ; Duration: 0:00:00
Processing Dimension 'try Structure_1 ~MC-__RowIndex' completed successfully.
Start time: 5/8/2007 4:55:08 μμ; End time: 5/8/2007 4:55:08 μμ; Duration: 0:00:00
Processing Dimension Attribute '(All)' completed successfully.
Start time: 5/8/2007 4:55:08 μμ; End time: 5/8/2007 4:55:08 μμ; Duration: 0:00:00
Processing Dimension Attribute 'EPI_CELL_SINO_GOOD' completed successfully.
Start time: 5/8/2007 4:55:08 μμ; End time: 5/8/2007 4:55:08 μμ; Duration: 0:00:00
Processing Dimension Attribute 'EPI_CELL_SINO_LOOSE' completed successfully.
Start time: 5/8/2007 4:55:08 μμ; End time: 5/8/2007 4:55:08 μμ; Duration: 0:00:00
Errors and Warnings from Response
Internal error: The operation terminated unsuccessfully.
Internal error: The operation terminated unsuccessfully.
Internal error: An unexpected error occurred (file 'pcprocbinding.cpp', line 6645, function 'PCDBProcBinding:electOrChangeCartridge').
Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'try Structure_1 ~MC-__RowIndex', Name of 'try Structure_1 ~MC-__RowIndex' was being processed.
Errors in the OLAP storage engine: An error occurred while the 'EPI_CELL_SINO_LOOSE' attribute of the 'try Structure_1 ~MC-__RowIndex' dimension from the 'DMAddinsDB2' database was being processed.
Internal error: The operation terminated unsuccessfully.
Internal error: The operation terminated unsuccessfully.
Internal error: An unexpected error occurred (file 'pcprocbinding.cpp', line 6645, function 'PCDBProcBinding:electOrChangeCartridge').
Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'try Structure_1 ~MC-__RowIndex', Name of 'try Structure_1 ~MC-__RowIndex' was being processed.
Errors in the OLAP storage engine: An error occurred while the 'EPI_CELL_SINO_GOOD' attribute of the 'try Structure_1 ~MC-__RowIndex' dimension from the 'DMAddinsDB2' database was being processed.
And no change to the structure take place.
Please help me if you can
Thank you in advnce
Best regards.
Manolis
View 1 Replies
View Related
Oct 18, 2006
Dear friends,
I encounter a serious problem.
I would like to develop an application that can create Data Mining structures and a mining model in SQL Server 2005 with VB.NET. I tried the code from book Data Mining with SQL server 2005 in chapter 14 but did not work. Any good idea?
Please help me.
Best regards,
Manolis
View 5 Replies
View Related
Oct 20, 2006
Thank you very much for your help.
The errors that I can see in the code that you gave in your answer are the following and they are more or less the same as I had previously
I tried the code but initially I have encounter the following problems.
1. In any line that have the declaration As Server, As Database like in
Public Function CreateDatabase(ByVal srv As Server, ByVal databaseName As String) As Database gives me the problem that type Database is not declared the same type Server is not declared and it does not give me any option.
2. In addition to that for As DataSource, As RelationalDataSource, As RelationalDataSourceView, As ScalarMiningStructureColumn, As DataSourceViewBinding, gives me the problem that type is not declared.
3. Finally in mc = New MiningModelColumn("Yearly income", Utils.GetSyntacticallyValidID("Yearly income", Type.GetType(MiningModelColumn))) is not accesible in this context because it is 'Private'.
I have some more problems but I thing that by solving the above that I referred I will solve the rest.
Thank you any way.
Best regards,
Manolis
PhD student
View 1 Replies
View Related
Nov 27, 2006
Hi ,all here,
Thank you very much for your kind attention.
I just found that I am not able to view the accuracy chart for my mining model. The error message is: no mining models are selected for comparision. Which is quite strange.
Any guidance? thank you very much.
With best regards,
Yours sincerely,
View 5 Replies
View Related
Apr 23, 2006
Hi,
I've come along way learning about databases and SQL. I can write basic queries now. Even some with subQueries. What I need to learn, is how to approach data mining. Can someone suggest the best path to follow, to learn how to accomplish data mining from a very large database?
I don't just need to produce reports of acquired data. I need to go in and grab data and look for patterns against known result sets. I hope that makes sense.
Thanks,
Milfredo
View 4 Replies
View Related
Jan 30, 2004
Hello all,
I was handed a new project and I'm not quite sure how to do it or even what technology to use. Now, I think that SQL Server's Analysis Services could help (or even do the entire thing) but I'm not sure. So, basically, I'm looking for recommendations and ressources on the subject.
Here's my scenario:
We have a Data-Warehouse that stores information about the production of our company. Around this fact table, we have multiple dimensions including one about the origin of the production (who) and a time dimension (when).
We are buiding cubes and linking Excel to them for future analysis. Everything is done. Now, the all-mighty supervisors would like to have some predictions built-in to the system for the rest of the year based on the previous years. Basically, we would be adding production values for every possible time (the step is every hour, so the sum of the production comming from a certain origin is set as the fact and linked to a time dimension row for that hour).
As you can see, it's not very difficult and it seems to me like Analysis Services might already have that functionnality although I couldn't find it (seems like predictions can only be made by looking at relations found by the data mining algorithms and these predictions need to be made by a human because they are not really registered as "new" facts).
So, in short, I'd like to have a tool calculate future productions for the rest of the year and set a new column (or dimension) to a certain value indicating that this fact row has been predicted and is not certain. Of course, the refreshing of data would not create duplicate rows for predictions, newer predictions (probably based on more facts) would replace the last equivalent prediction.
I hope that's clear.
What do you recommend I use? Is it a case where I will need to build my own separate program (that updates the data-warehouse) or is it possible to achieve this using data mining?
Thanks a lot,
Skip.
View 5 Replies
View Related
Mar 17, 2007
1)In solution explorer,what is data source folder?
View 1 Replies
View Related
May 5, 2007
I am building a web data mining application using sql server 2005 .
I have create my cubes, structures and mining models in analysis services
and i am trying to show the results through a web form (asp.net)
Does anyone know how can i call a specific mining model
(e.g association rules model) through my form (and show the output) ?
I did not manage to find out how to capture the model (how is it saved, how to access it).
I would appreciate any help.
MSc student
View 5 Replies
View Related
Aug 2, 2006
Hi to all,
Wat is data mining? what is the use of data mining in SQL?
wat is the difference between SQL 2005 and sql2000?
Thanks & Regards
Mani
View 1 Replies
View Related
Aug 12, 2006
Well thank you so much for the reply of my question before. But i still have some questions :
1. I've made a data mining model using DSO and VB 6.0. And i found a listing programs like this :
const adinteger = 3
const adwchar = 130
My question is what does the listing program above means?
2. What kind of data type for adinteger and adwchar? is there are OLE DB data type?
3. In analysis manager, data mining model browser, especcially in content navigator for attribut, there will be Node total value, Yes value, No value and Missing value. My question is What does missing value means? and what's the function of missing value?
I reaaly hope that anyne could answer my question. Thank you so much.
View 1 Replies
View Related
Aug 2, 2006
Wat is the difference between SQL 2000 and SQL 2005? Wat are all the advantages in SQL 2005?
Thanks & Regards,
Mani
View 1 Replies
View Related
