Can't Attach DB, Reports Error 824
Sep 20, 2007
Hi,
SQL Server 2005
When I try to attach a SDE data.mdf I get.
SQL Server detected a logical consistency-based I/O error: incorrect pageid (expected 1:3067392; actual 0:0). It occurred during a read of page (1:3067392) in database ID 10 at offset 0x000005d9c00000 in file 'E:ODYSSEUS SDE DataMSSQL.1MSSQLData.mdf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online. Could not open new database 'sde'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 824)
Is there anyway to fix this DB so it can be attached.
Thanks for your thoughts & comments...
View 7 Replies
ADVERTISEMENT
Nov 21, 2007
An attempt to attach an auto-named database for file C:WebApp_Dataaspnetdb.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
My web.config file, the connection strings
<connectionStrings>
<add name="POAdatabaseConnectionString1" connectionString="Data Source=sss;Persist Security Info=True;Initial Catalog=POAdatabase.mdf;Integrated Security=SSPI" providerName="System.Data.SqlClient" />
</connectionStrings>
I cann't really find the statement for attaching aspnetdb.mdf. I don't where to find it. Is there any other web.config file in the C drive? Thanks for help!
View 3 Replies
View Related
Sep 7, 2005
I know the chances of getting a positive answer on this are remote but here goes:
I have a db that I need to move to a new server (that isnt on the same network !)
Firstly tried, backing up the DB, copying the backup to various removable media, copied it onto the new server, then tried restoring. The restore almost completes, then comes up that backup is incomplete !
If I restore the DB on the original server from the same backup file it works fine !
Second method, detached the DB, copied the mdf file to a memory stick, copied onto the new server, attempted to attach the mdf file and get:
I/O error (bad page ID) detected during read at offset 0x00000003f80000 in file ..........mdf
Error: 823, Severity: 24, State: 2
If I re-attach the file on the original server this works !!!
My next step will be to get the two servers connected over the network, so that I can use DTS, but this is not ideal and would like to avoid this if possible.
If anybody has any suggestions, I would be eternally grateful.
p.s. I have tried restoring/attaching on other servers in case it was a problem with the new server, but get the same problems.
Regards
Tom
View 4 Replies
View Related
Dec 16, 2006
I plan to move my database file to another folder, I detach it first (successfull), but I can't move (Cut&Paste) my database to another folder (Access is denied), And then I go back object explorer but error when I try to Attach
"Failed to retrieve data for this request (Microsoft.SQLServer.SmoEnum)...... CREATE FILE encountered operating system error 5 (Access is denied)"
please tell me how to attach my database, I really need the data..
thx..
View 1 Replies
View Related
Mar 21, 2006
Cannot access the specified path or file on the server. Verify that you have the necessary security privileges and that the path or file exists.
If you know that the service account can access a specific file, type in the full path for the file in the File Name control in the Locate dialog box.
------------------------------
I get this error when I try to attcah a Database file sitting in "My Documents" folder.
Any help will be appreciated
--Thanks
View 1 Replies
View Related
Jun 16, 2005
I am trying to attach a database to SQLEXPRESS. I get an error, [Directory Lookup for the file C: . . . DataORION.mdf" failed with the operating system error 5(Access is denied.)]
I tried to attach another database and got the same error. I have attached databases to SQLEXPRESS before successfully. I tried to attach using single file to no avail.
I am using the query, "sp_attach_db @dbname=N'ORION', @filename1=N'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataORION.MDF'
go"
ORION.mdf is in the Data folder for SQLEXPRESS
What am I doing wrong or what did I change inadvertently to restrict my access to the file?
Randy Fair
View 6 Replies
View Related
Oct 27, 2007
Hi!
I created one database on one server which system working with Win2003server. Now I tried to attach the database to another server which is working with WinXP SP2, I got this error
'Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "E:ASPNETDB.MDF". Operating system error 5: "5(Access is denied.)".
Msg 911, Level 16, State 1, Line 1
Could not locate entry in sysdatabases for database 'Everydayonline'. No entry found with that name. Make sure that the name is entered correctly.'
is anything i am missing while attaching? i just copied the .mdf and .log file from first system to second system. I was tried to make backup of the database and restore, but it was also not workedout. When I tried to restore the database I got this error
'Msg 5133, Level 16, State 1, Line 1
Directory lookup for the file "F:ASPNETDB.MDF" failed with the operating system error 3(The system cannot find the path specified.).
Msg 3156, Level 16, State 3, Line 1
File 'ASPNETDB_983ed943e1fe49e3ae7fa189b823b238_DAT' cannot be restored to 'F:ASPNETDB.MDF'. Use WITH MOVE to identify a valid location for the file.
Msg 5133, Level 16, State 1, Line 1
Directory lookup for the file "F:ASPNETDB_log.ldf" failed with the operating system error 3(The system cannot find the path specified.).
Msg 3156, Level 16, State 3, Line 1
File 'ASPNETDB_TMP_log' cannot be restored to 'F:ASPNETDB_log.ldf'. Use WITH MOVE to identify a valid location for the file.
Msg 3119, Level 16, State 1, Line 1
Problems were identified while planning for the RESTORE statement. Previous messages provide details.
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.'
Please help me to do this.
View 5 Replies
View Related
Dec 18, 2007
Hi
I Have just detached my SQL Server database, I am currently running SQL Server 2005, when I try to reattach it I get the error Cannnot open user default database - Login Failed
Any ideas.
View 4 Replies
View Related
Feb 25, 2008
need some help with some errors.
Today I recieved this alert from the SQL Server, when I want to attach database:
Server: Msg 823, Level 24, State 6, Line 1
I/O error (torn page) detected during read at offset 0000000000000000 in file 'D:Program FilesMicrosoft SQL ServerMSSQLdataDB Askes Apotik_Data.MDF'.
Connection Broken
I was Running dbcc checkdb repair_allow_data_loss with ALL_ERRORMSGS, NO_INFOMSGS yield the following:
Server: Msg 945, Level 14, State 2, Line 1
Database 'DB Askes Apotik' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
Any ideas on how to resolve these errors?
thx
View 15 Replies
View Related
Oct 29, 2007
I have done this many times in the past but now I am seeing a error when I try to move my db from my local machine to the server and try to re attach it. The error I am receiving is:
TITLE: Microsoft SQL Server Management Studio Express------------------------------ Failed to retrieve data for this request. (Microsoft.SqlServer.Express.SmoEnum) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476 ------------------------------ADDITIONAL INFORMATION: An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo) ------------------------------ CREATE FILE encountered operating system error 5(Access is denied.) while attempting to open or create the physical file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataCuddleUpCabinRentals.mdf'. (Microsoft SQL Server, Error: 5123) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.2047&EvtSrc=MSSQLServer&EvtID=5123&LinkId=20476 ------------------------------BUTTONS: OK
------------------------------
When I right click the files and check their permissions I am noticing when its moved to the server it adds a few new ones and I can't make changes to them or anyting else. That is the only difference I am seeing from the ones I did earlier this week and now with the ones that are not working. I can't find anything in sql on what might cause this so any direction would be great.
ThanksRusty
View 4 Replies
View Related
Apr 13, 2003
Database Restore & Attach Error
I have a problem with restoring or attaching DB files from different version of the engine. I Have a existing SQL server 7.x and another one is SQL 2000 but I try to backup my database and restore it into the 2000 engine This is the following Problem which occurs :-
1st Problem : During Restoration, The restoration process was runing fine until it reach the last inficatior tab and it fail and say Database terminated abnormal. I been try to restore into other machine also but it give me the same problem.
2nd Problem : Say I can't restore but I stop the engine and manual copy the *.mdf and *.ldf to another machine. I try to restore it but it "is on a network device not supported for database files." So what shall I Do with it.
Pls Advise If anything need to be done before I do the restoring and anything need to be done in both 7.x and 2000 Engine.
:confused:
View 1 Replies
View Related
Mar 18, 2004
hi to all
I got a probelm with attaching the database. I hv Database Name called "ABC". it is working fine. (contain MDF,LDF files)
I got new BackFiles from CLient. They sent MDF and LDF Files. But i could't able to attach the database i got the following error while attaching the databse.
Server: Msg 5173, Level 16, State 2, Line 1
Cannot associate files with different databases.
I tried with the following query
EXEC sp_attach_db @dbname = N'ABC',
@filename1 = N'C:DataBaseABC.mdf',
@filename2 = N'C:DataBaseABC_log.ldf'
i Tried with EnterPrise Manager also i got the same error. you can see the attachment file to view the ERROR.
Please Help me .Urgently...
View 1 Replies
View Related
Oct 13, 2015
I copied database .mdf and trying to attached to sql 2012 server but it gives error as attached
tried following
1. added user everyone with full control
2. coping .mdf in sql server default data folder
running sql studio manager in adminstrator
View 1 Replies
View Related
Aug 1, 2006
Hi,
i need to attach my db, but i receive this error:
an error occurred while processing the log for database 'xyj'.
Could not open database 'xyj' . Create database is aborted. (Microsoft Sql Server,
error 9004).
Can you help me?
View 14 Replies
View Related
Aug 23, 2007
We have a log shipping database running on SQL 2000 ENT SP4, the secondary DB is in standby/read only mode . we have a job that runs every day to take it offline, make a copy of the files and attach them as a new database for reporting purposes.
We're planning to upgrade to SQL 2005 however, when we copy the Standby/read only database files and attach using "CREATE DAABASE FOR ATTACH" we get :
msg 1284
Cannot attach a database that was being restored.
this works in SQL 2000 but not SQL 2005, is there a way to force attach the DB ?
Thanks.
View 4 Replies
View Related
Apr 3, 2007
Hi Guys,This is my first post and I hope I'm not going to embarrass myself to much.I am currently writing a pseudo install package for SQL Server Express, it is written in VB.Net 2.0.
I have created an *.exe that fires the SQL Server Express install package silently with command line options, once complete the *.exe copies an *.MDF and an *.LDF to the newly created data directory. Once the data has been copied I fire a "CREATE DATABASE FOR ATTACH" using a SQLClient.SQLCommand to attach my DB. I am using Windows Authentication for SQL Server Express.This all works beautifully when the *.exe is being run from a local hard disk - complete success.When I move the *.exe to a CD it fails . SQL Server is installed correctly, the files are copied to the local hard disk in the correct location. I then fire the "CREATE DATABASE" command - its here I get the error.The error details are:Unable to open the physical file "c:....Exchange.LDF". Operating System error 5:"5(error not found)". Cannot create file "c:....Exchnage.ldf" because it already exists. Change the file path or file name, and retry the operation. Could not open new database 'Exchange'. CREATE DATABASE is aborted. File activation failure. The physical file name "c:....Exchange.LDF" may be incorrect.Remember this works perfectly when run from the local hard disk, this only occurs when running from a CD-ROM.Now from the research I have done I believe it may be a permissions error. The setup *.exe is being run from a Administrator account and the SQL Server DB Engine Service Account is System. I'm under the impression that this should provide more than enough permissions.
Thanks for any help you guys may be able to provide...
Matt.
View 11 Replies
View Related
Jan 29, 2008
Hello.
Our GIS group is working with SQL Server 2005 in conjunction with ESRI's ArcGIS software. SQL Server is being used as a test bed until we formally migrate our existing Microsoft Access mdb's over. So, at this time we are conducting various tests and have the freedom to "blow up" our databases.
We are currently testing ArcSDE Workgroup edition, which will only work with SQL Server Express (SSE). SSE will let us create spatial joins and relationships, while maintaining data integrity. So one possible workaround was to detach the database from SQL Server 2005 and then attach it to SSE. Unfortunately, we ran into a problem in re-attaching the database back to SQL Server 2005.
The exact steps are as follows:
Back up database using back up tool in SQL Server 2005.
Detached database from SQL Server 2005.
Attached database to SQL Server Express (hereafter SSE).
Created a table in database while it was attached to SSE.
Detached database from SSE.
Attempt to attach database to SQL Server 2005 failed
Successfully restored database in SQL Server 2005 using Restore tool.
Step number 6 above failed and generated the following error:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
CREATE FILE encountered operating system error 5(Access is denied.) while attempting to open or create the physical file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataLNRIS_SQL_Test.mdf'. (Microsoft SQL Server, Error: 5123)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=5123&LinkId=20476
Questions:
Why did I get this error?
Can incorrect or missing permission or ownership settings generate this kind of error?
When should one detach/attach a database?
I welcome your assistance and suggestions.
View 12 Replies
View Related
Mar 14, 2006
tried to attach a database in sse-ms, and for some reason the database name is changing to G:someFoldersomeFolderdb.mdf, even tho i dont have a drive g:,
during "attach as" screens inside sse-ms, , ie attach>add> then select the database the mdf loction is what it is suppose to be ie C:inetpubwwwrootapp_datachp11wroxunited.mdf but the database name in the same screen shot is G:someOtherFolderAndPathwroxunited.mdf and the attach as is also the G:someOtherFolderAndPathwroxunited.mdf.
pretty confused, could use a clue, thanks
View 3 Replies
View Related
Aug 1, 2006
Hi,
I've just created my first projects using Visual Studio 2005 and SQL 2005 Express. This is the basic;
One windows service is created that updates a database. The windows service running under "Local system" account
One windows application where a user can see data (and change) from the database
A common business and dataaccess layer/project is used by both applications
Connection string to the database: "Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|DataDatabase.mdf;Integrated Security=True;Connect Timeout=60;User Instance=True"
Both application is located in the same directory. When the computer starts the windows service starts and works perfectly. But when a user starts the windows applications the following error is reported "An attempt to attach an auto-named database for file..A database with the same name exists, or specified file cannot be opened, or it is located on UNC share".
It look likes that only one of my application can connect to the database at a time!
Is it possible to use separate applications to connect to the same database file?
/Robert
View 7 Replies
View Related
Jan 17, 2007
Hello,
I have seen some solutions of which I tried on this form for the error I am receiving, but I still cannot get the issue resolved.
Here is my case:
I developed an app using SQL Express as the local data source. I published it to my server using the Once Click install feature. When I look in my project viewer, under settings, My db connection strings are listed as follows: Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|TAP_Master.mdf;Integrated Security=True;User Instance=True
From another computer, I navigate to the publish site, install and run the application with no problems. I have on another computer, the same app with an updated version number that I wish to publish, however the difference is is that this published version does not include the database as I do not want the end user to overwrite any existing data that they may have from the previous version.
I publish the updated version, install it but when the app runs, I receive the message, "An attempt to attach an auto-named database for file".
Any suggestions?
Thanks in advance.
View 6 Replies
View Related
Feb 22, 2008
I had few databases developed in SQL Server 2005 Developer Edition. I have detached all the databases and stopped developing anything new other than taking reqular backup of detached .mdf and .ldf files. I installed Vista on the other Hard drive that corrupted my XP installation drive letters so I had to reinstall XP OS. I have reinstalled SQL 2005 Dev edition. Now I am trying to attach the database it is giving error of Operating system error 5: "5(Access is denied.)". I tried to copy those .mdf and .Ldf files through windows explorer and it is not letting me copy past in the other place. I am getting Access denied from OS. I have about 5 databases and only one has this problem.
What is going on and how do I solve this? Is the OS has locked the file? My home computer is not in a domain. I tried to right click the file to see if I can set access permission on the file. There is no such security options. Any help is appreciated.
Thanks,
Vijay
View 1 Replies
View Related
Jan 24, 2008
I've installed Visual Studio 2005 Professional evaluation edition on both my desktop & on the server to try out the Debugger to be used with my Stored procedures
I got this error message every time i try to 'Step into Stored Procedure' from my desktop to connect to the stored procedure which resides on the Server.
Error message: Unable to Start T-SQL Debugging. Could not attach to SQL Server Process on 'Server1'.The RPC server is unavailable
The 'Step into Stored Procedure' works though if I open the stored procedure directly on the server.
Both my PC and Server has been installed with Remote Debugger and my windows login has been assigned permission to debug on the debugger that resides on the Server and has sysadmin server role on SQL 2005 both on PC and Server.
Can someone tell me what i miss out to debug Stored procedure in the SQL Server 2005 on the Server from my PC?
Thanks in advance.
View 1 Replies
View Related
May 9, 2008
I recently installed SQL Server 2005 Enterprise on a machine running Server 2003. I have successfully configured Reporting Services (see below for summary of settings)
- Used the defaults for the Repor tServer and Report Manager Virtual Directories
- Windows Service Identity set to domain user. The domain user is part of the administrator group on the machine and has sysadmin rights to the database
- Web Service Identity set to NT AuthorityNetworkService
When I open http://localhost/reports/, I get the following error:
I have check a bunch of forums, but have no success. Any advise would be greatly appreciated!!
Server Error in '/Reports' Application.
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: CS0016: Could not write to output file 'c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628App_global.asax.th5hkjqv.dll' -- 'The directory name is invalid. '
Source Error:
[No relevant source lines]
Source File: Line: 0
Show Detailed Compiler Output:
c:windowssystem32inetsrv> "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727csc.exe" /t:library /utf8output /R:"C:WINDOWSassemblyGAC_32System.Web2.0.0.0__b03f5f7f11d50a3aSystem.Web.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl3a890e9c0 068591f_f54cc701ReportingServicesFileShareDeliveryProvider.DLL" /R:"C:WINDOWSassemblyGAC_MSILSystem.Web.Mobile2.0.0.0__b03f5f7f11d50a3aSystem.Web.Mobile.dll" /R:"C:WINDOWSassemblyGAC_32System.Data2.0.0.0__b77a5c561934e089System.Data.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem.Web.Services2.0.0.0__b03f5f7f11d50a3aSystem.Web.Services.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem.Configuration2.0.0.0__b03f5f7f11d50a3aSystem.Configuration.dll" /R:"C:WINDOWSassemblyGAC_32System.EnterpriseServices2.0.0.0__b03f5f7f11d50a3aSystem.EnterpriseServices.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem.IdentityModel3.0.0.0__b77a5c561934e089System.IdentityModel.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem.ServiceModel3.0.0.0__b77a5c561934e089System.ServiceModel.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem2.0.0.0__b77a5c561934e089System.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl34a099978 068591f_f54cc701ReportingServicesEmailDeliveryProvider.DLL" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727mscorlib.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl3de5a2332 0958a20_f54cc701ReportingServicesWebUserInterface.DLL" /R:"C:WINDOWSassemblyGAC_MSILSystem.Xml2.0.0.0__b77a5c561934e089System.Xml.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl3498aee86 042473c_93d0c501ReportingServicesCDOInterop.DLL" /R:"C:WINDOWSassemblyGAC_MSILSystem.Runtime.Serialization3.0.0.0__b77a5c561934e089System.Runtime.Serialization.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem.Drawing2.0.0.0__b03f5f7f11d50a3aSystem.Drawing.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl3cd47089b 0f2a80e_f54cc701Microsoft.ReportingServices.Interfaces.DLL" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl3f180608d 0083daf_b16dc701Microsoft.ReportingServices.Diagnostics.DLL" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl323449648 068591f_f54cc701ReportingServicesNativeClient.DLL" /out:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628App_global.asax.th5hkjqv.dll" /debug- /optimize+ /w:4 /nowarn:1659;1699;1701 "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628App_global.asax.th5hkjqv.0.cs" "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628App_global.asax.th5hkjqv.1.cs"
Microsoft (R) Visual C# 2005 Compiler version 8.00.50727.1433
for Microsoft (R) Windows (R) 2005 Framework version 2.0.50727
Copyright (C) Microsoft Corporation 2001-2005. All rights reserved.
error CS0016: Could not write to output file 'c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628App_global.asax.th5hkjqv.dll' -- 'The directory name is invalid. '
Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433
View 5 Replies
View Related
Mar 13, 2008
First off I understand that it is a horrible idea to run extremely large/long running reports, but sometimes it ends up being the best possible solution due to external forces.
I've got a 25,000 page report that we recently converted from crystal reports to SSRS. The SSRS server is a 64bit 2003 server with 32 gigs of ram running SSRS 2005. When running the report through the report manager web application, it renders in the browser/viewer after about 12 minutes. Exporting to pdf through the browser/viewer in the report manager takes an additional 55 minutes. It does work and it produces a whopping 1.03gb pdf.
Unfortunately, I've run into a problem when trying to do this from a console application using the SSRS client API. After about 30-35 minutes I get an exception on the client with the following error:
Exception Message: The underlying connection was closed: An unexpected error occurred on a receive.
InnerException = Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
Here is the api call:
Code Snippet
byte[] m_data = reportingService.Render(this.ReportPath, this.ExportFormat, null,
deviceInfo, selectedParameters, null, null, out encoding, out m_mimeType,
out usedParameters, out warnings, out streamIds);
Here are some things I've tried so far:
set the HttpRuntime ExecutionTimeout value to 3 hours on the report server
disabled http keep alives on the report server
increased the script timeout on the report server
set the report to never time out on the server
set the report timeout to several hours on the client call
Disabled antivirus on the client side, and verified there was no antivirus running on the reporting server.
Tried using default credentials in the ReportingService object as opposed to supplying credentailsAny ideas would be appreciated. I understand the best solution is to split the report up into smaller reports, which is the backup option, but being able to keep it as one report is the goal.
View 1 Replies
View Related
Mar 28, 2007
I keep getting an error around the where statement can some one help me Sql Reports what is missing
SET DATEFORMAT mdySELECT PAYER.PAY_COMPANY AS Company, PAYER.PAY_CITY AS Branch, DATEPART(yy, INVOICE_AR.INVOICE_DATE) AS OrderYear, 'Q' + DATENAME(qq, INVOICE_AR.INVOICE_DATE) AS OrderQtr
FROM PAYER INNER JOIN INVOICE_AR
WHERE (INVOICE_AR.INVOICE_DATE BETWEEN '1/01/2004' AND '12/31/2005')
GROUP BY DATEPART(yy, INVOICE_AR.INVOICE_DATE), PAYER.PAY_COMPANY, PAYER.PAY_CITY, 'Q' + DATENAME(qq, INVOICE_AR.INVOICE_DATE)
View 1 Replies
View Related
Jun 4, 2008
HAI,
([Business Segment Master].[Main Group].&[Cash on Hand],[Measures].[Last Week Date Data])/([Business Segment Master].[Sub Group].&[Terminal Deposits],[Measures].[Last Week Date Data])
This is the calculated measure iam using with MDX queries. iam getting NAN ,#ERROR in reports. i need help in this issue. it is very urgent.
Thanks and Regards,
venugopal.
View 1 Replies
View Related
Sep 5, 2006
I have used the copy database wizard, but I realized I had forgotten to shrink the transaction log file. So I canceled the wizard. My database, detached by the wizard, has now disappeared. The mdf file is still there, but when I try to attach it manually I get the "create file encountered operating system error 5 while attempting to open the physical file..." error.
Any way I can recover it?
Thanks.
View 4 Replies
View Related
May 21, 2008
I am using the Reports as a web service from Reporting Service
I am getting the following error on the Render menthod of ReportingService class
System.Web.Services.Protocols.SoapException was unhandled by user code
Message="System.Web.Services.Protocols.SoapException: An internal error occurred on the report server. See the error log for more details. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.ReportingServices.ReportProcessing.ParameterInfoCollection.ToUrl(NameValueCollection coll) at Microsoft.ReportingServices.Library.RSService.RenderFirst(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames) at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.Execute() at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper() --- End of inner exception stack trace --- at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper() at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.RenderFirst(RSService rs, CatalogItemContext reportContext, ClientRequest session, JobType type, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames) at Microsoft.ReportingServices.WebServer.ReportingService.Render(String Report, String Format, String HistoryID, String DeviceInfo, ParameterValue[] Parameters, DataSourceCredentials[] Credentials, String ShowHideToggle, Byte[]& Result, String& Encoding, String& MimeType, ParameterValue[]& ParametersUsed, Warning[]& Warnings, String[]& StreamIds) --- End of inner exception stack trace --- at Microsoft.ReportingServices.WebServer.ReportingService.Render(String Report, String Format, String HistoryID, String DeviceInfo, ParameterValue[] Parameters, DataSourceCredentials[] Credentials, String ShowHideToggle, Byte[]& Result, String& Encoding, String& MimeType, ParameterValue[]& ParametersUsed, Warning[]& Warnings, String[]& StreamIds)"
Source="ReportSampleForWebService"
Actor="http://gshah755/ReportServer/ReportService.asmx"
Lang=""
Node="http://gshah755/ReportServer/ReportService.asmx"
Role=""
StackTrace:
at ReportSampleForWebService._Default.Page_Load(Object sender, EventArgs e) in E:GunjanPracticeProjectsReportSampleForWebServiceReportSampleForWebServiceDefault.aspx.cs:line 110
at System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e)
at System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e)
at System.Web.UI.Control.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
This is my code
protected void Page_Load(object sender, EventArgs e)
{
try
{
ReportingService rs = new ReportingService();
rs.Credentials = System.Net.CredentialCache.DefaultCredentials;
// Render arguments
byte[] result = null;
string reportPath = "/Report Project1/OrderDetails";
string format = "MHTML";
string historyID = null;
ParameterValue[] optionalParams = new ParameterValue[5];
ParameterValue p1 = new ParameterValue();
p1.Name = "ProductGroupID";
p1.Value = "Lunesta";
optionalParams[0] = new ParameterValue();
optionalParams[0].Name = "ProdGroupID";
optionalParams[0].Name = "Lunesta";
optionalParams[1] = new ParameterValue();
optionalParams[1].Name = "BeginDate";
optionalParams[1].Name = "02/01/2008";
optionalParams[2] = new ParameterValue();
optionalParams[2].Name = "EndDate";
optionalParams[2].Name = "02/29/2008";
optionalParams[3] = new ParameterValue();
optionalParams[3].Name = "HierarchyString";
optionalParams[3].Name = " ";
optionalParams[4] = new ParameterValue();
optionalParams[4].Name = "Level";
optionalParams[4].Name = "5";
DataSourceCredentials[] credentials = new DataSourceCredentials[1];
string showHideToggle = null;
string encoding;
string mimeType;
Warning[] warnings = null;
ParameterValue[] reportHistoryParameters = null;
string[] streamIDs = null;
SessionHeader sh = new SessionHeader();
rs.SessionHeaderValue = sh;
result = rs.Render(reportPath, format, historyID, "<DeviceInfo><StreamRoot>/RSWebServiceXS/</StreamRoot></DeviceInfo>", optionalParams, credentials,
showHideToggle, out encoding, out mimeType, out reportHistoryParameters, out warnings,
out streamIDs);
Response.BinaryWrite(result);
}
catch (Exception ex)
{
throw ex;
}
}
where I am doing wrong??
View 1 Replies
View Related
Mar 4, 2008
Hi All,
I created a report using visual studio and published it in dev server which is in another machine. Then I connected a shared data source which was already publisehd earlier by someone else. I use a stored proceedure for the report which has two FromDate and Todate parameters. But once I deploy the report, i can not see it on report manager. When I try to view it, I get the following error
.
An error has occurred during report processing.
Query execution failed for data set 'DataSet1'.
For more information about this error navigate to the report server on the local server machine, or enable remote errors
Can anyone help me how to fix this error?
Thanks
View 3 Replies
View Related
Jul 23, 2007
I have a report serve at http://MyServer/reportserver
My Asp .net web application is running on anothere machine http://WebappMachine/default.aspx.
Here is what is happening
1.My Report server admin created a folder <<MyName>> and gave me user name and password to acess it .
2.I connect through url http://Servername/reportserver . server prompts me for Username and password . When I key in user name pass word it takes me to the
root . I browsed through to the <<MyNameReports>> and created datasource and uploaded .RDL files.
3.I browse the URL to run reports externally using http://myReportserver/ReportServer/Pages/ReportViewer.aspx?%2fDeveloper%2fmyname%2fReports%2ftestreport&rs:Command=Render
it works .
4. I am developing a web app in Asp .net and use reportviewer control to show the report. Credentials is the same as what I using during manually running the reports .Code is as follows
Me.ReportViewer1.ServerReport.ReportServerCredentials = New System.Net.NetworkCredential(uid, pwd)
Me.ReportViewer1.ProcessingMode = ProcessingMode.Remote
Me.ReportViewer1.ServerReport.ReportServerUrl = New System.Uri("http://myreportserver/reportserver")
Me.ReportViewer1.ServerReport.ReportPath = New String("/Developer/myname/Reports/testReport")
Me.ReportViewer1.ServerReport.SetParameters(RptParameters)
Me.ReportViewer1.ServerReport.Refresh()
I get following error .
"The request failed with the error message:
--
<html><head><title>Object moved</title></head><body>
Object moved to here.
</body></html>
--."
I tried to use API
Dim rs As New Microsoft.SqlServer.ReportingServices2005.ReportingService2005()
rs.Url = "http://myreportserver/reportserver/ReportService2005.asmx"
rs.Credentials = New System.Net.NetworkCredential(UID, PWD)
rs.LogonUser(UID, PWD, Nothing)
Dim items As CatalogItem() = rs.ListChildren("/Developer/myname/Reports", True)
When I debug , it pass through LogonUser method ( or Displays Logon failed when wrng pwd entered ) .But displays same message as above when ListChildren is called .
I appreciate for your time and would be of great help if someone can help me with this .
View 4 Replies
View Related
May 31, 2007
Dear All,
Recently i have installed Ms CRM 3.0 on a server wich uses IIS as platform and CRM application as default website. And, the Report Server is running when i access it using Ms internet explorer but when i try to using the application I receive an error message that says " Reports.config has invalid schema and could not be loaded " any Ideas!!! I need a solution ASAP so your help is highly appreciated and thx
All regards,
View 1 Replies
View Related
Nov 29, 2007
Hi,
I am using a Oracle database to connect to and generate reports from it. Intermittently, the report after running for sometime raises the oracle error
ORA-12842: Cursor invalidated during parallel execution, which I read could possibly be due to DDL on a schema object and shared pool being flushed. Rerunning again, the report runs fine.
How can this be resolved. Any suggestions/tips are appreciated.
Thanks,
Swami
View 3 Replies
View Related
Mar 21, 2007
I have created a report, in SQL RS 2000, using My Windows Credentials.
ie under the datasource tab, I chose the "credentials stored securely in report server" OPTION. There I specified my user NT Credentials.
However, when I view the report, it gives me err
An error has occurred during report processing. (rsProcessingAborted) Get Online Help
Cannot create a connection to data source xxx. (rsErrorOpeningConnection) Get Online Help
Login failed for user xxxx
Pl advise.
Thanks.
View 1 Replies
View Related
